检索结果-南通市图书馆

Journal of Magnesium and Alloys 2024年第5期12卷 1841-1853页

作者： M.Lv H.L.Ge Q.Q.Jin X.H.Shao Y.T.Zhou B.Zhang X.L.Ma Shenyang national Laboratory for materials Science Institute of Metal ResearchChinese Academy of Sciences72 Wenhua RoadShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China materials Science and Engineering research Center Guangxi University of Science and TechnologyLiuzhou 545006China

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3Y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the *** results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being *** is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous *** latter plays a key role in precipitation *** result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

关键词： Mg alloy Electron beam irradiation Hardening Precipitates In-situ TEM

Bifunctional passivation by lewis-base molecules for efficient printable mesoscopic perovskite solar cells

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 177-184页

作者： Hang Yang Jianhong Zhao Xiaodong Ren Tong Zhou Henbing Zhang Weilong Zhang Jin Zhang Guangzhi Hu Yuming Zhang Wen-Hua Zhang Qingju Liu Yunnan Key Laboratory for Micro/Nano materials & Technology National Center for International Research on Photoelectric and Energy Materials School of Materials and Energy Yunnan UniversityKunming 650091YunnanChina institute for Ecological research and Pollution Control of Plateau Lakes School of Ecology and Environmental Science Yunnan UniversityKunming 650091YunnanChina

Printable mesoscopic perovskite solar cells(PM-PSCs)possess notable merits in terms of cost-effectiveness,easy manufacturing,and large scale ***,the absence of a hole transport layer contributes to the exacerbation of carrier recombination,and the defects between the perovskite and electron transport layer(ETL)interfaces significantly decrease the efficiency of the *** this study,a bifunctional surface passivation approach is proposed by applying a thioacetamide(TAA)surfactant on the mesoporous TiO_(2)*** results demonstrate that TAA molecules could interact with TiO_(2),thereby diminishing the oxygen vacancy ***,the amino group and sulfur atoms in TAA molecules act as Lewis base to effectively passivate the uncoordinated Pb^(2+)in perovskite and improve the morphology of perovskite,and decrease the trap-state density of *** TAA passivation mechanism improves the alignment of energy levels between TiO_(2)and perovskite,facilitating electron transport and reducing carrier ***,the TAA-passivated device achieved a champion power conversion efficiency(PCE)of 17.86%with a high fill factor(FF)of 79.16%and an open-circuit voltage(V_(OC))of 0.971 *** investigation presents a feasible strategy for interfacial passivation of the ETL to further improve the efficiency of PM-PSCs.

关键词： Perovskite solarcells Carbon electrode Thioacetamide Interfacial passivation

High-performance wood-based thermoelectric sponges for thermal energy harvesting and smart buildings

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第6期17卷 5349-5357页

作者： Ding Zhang Qi Li Yanjie Fang Peijia Bai Lili Liu Jiaqi Guo Guangfa Wang Yuetong Zhou Rujun Ma School of materials Science and Engineering National Institute for Advanced MaterialsSmart Sensing Interdisciplinary Science CenterNankai UniversityTianjin 300350China

The development of renewable woods for power generation can help improve the energy efficiency of buildings,and promote the concept design and implementation of“smart buildings”.Here,with specific chemical treatment and hydrothermal synthesis,we demonstrated the practical value of natural wood for thermoelectric power generation in smart *** prepared wood-based thermoelectric sponges show high Seebeck coefficients of 320.5 and 436.6μV/K in the vertical and parallel directions of the longitudinal channel of *** 500 cycles of the compressive strain at 20%,the corresponding Seebeck coefficients increase up to 413.4 and 502.1μV/K,respectively,which is attributed to the improved contact and connection between tellurium thermoelectric *** Seebeck coefficients are much larger than those of most reported inorganic thermoelectric ***,the thermoelectric sponges maintain excellent thermoelectric and mechanical *** further modeled the application value of wood-based thermoelectric sponges in smart buildings for power *** high thermoelectric electricity can be obtained,such as in Beijing with over 1.5 million kWh every year,demonstrating the great potential in thermal energy harvest and energy supply.

关键词： wood thermoelectric effect thermal energy harvesting smart buildings energy supply

Multi-performance evaluation of high-throughput accelerated corrosion test for high-strength low-alloy 921A steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel research International 2024年第5期31卷 1260-1278页

作者： Cong-cong Du Ming-hua Qin Zhan-fang Wu Dong-ling Li Lei Zhao Xiang-yang Li Hai-zhou Wang Beijing Advanced Innovation Center for materials Genome Engineering National Center for Materials Service SafetyUniversity of Science and Technology BeijingBeijing100083China China Iron and Steel research institute Group Co. Ltd.Beijing100081China Beijing Advanced Innovation Center for materials Genome Engineering Central Iron and Steel Research InstituteBeijing100081China

The corrosion behavior of high-strength low-alloy 921A steel in a simulated marine atmospheric environment was studied using a high-throughput experimental *** corrosion behavior,corrosion morphology,and corrosion products of 921A steels were analyzed using various techniques,including corrosion mass loss method,polarization curve,white-light interferometry,scanning electron microscopy,energy-dispersive spectrometry,microbeam X-ray fluorescence spectrometry,X-ray diffraction technique,and X-ray photoelectron *** test results indicated that 921A steel exhibits better corrosion resistance than Q450NQR1 steel in simulated harsh atmospheric environments,as evidenced by a lower corrosion mass loss rate throughout the corrosion *** corrosion products of both steels consisted ofα-FeOOH,Fe_(3)O_(4),andγ-FeOOH,withα-FeOOH being more prevalent in the rust layer of 921A steel than in Q450NQR1 *** inner rust layer of 921A steel also exhibited an appositional enrichment region of Cr,Ni,Mo,and V,leading to its superior corrosion resistance compared to that of Q450NQR1 *** efficacy of high-throughput accelerated corrosion experimental methods was highlighted for evaluating the corrosion resistance of steel materials in harsh environmental *** findings suggest that 921A steel exhibits better corrosion resistance compared to Q450NQR1 steel and has the potential to be more suitable in harsh marine atmospheric *** characterization of the rust layer structures and composition reveals the parallel enrichment of certain elements in the inner rust layer of 921A steel,which enhances its corrosion resistance.

关键词： Atmospheric corrosion High-throughput experimental method High-strength low-alloy steel Corrosion characteristics Rust layer Element enrichment

High-performance anisotropic SmCo-based magnet with novel microstructure

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第8期42卷 1539-1545,I0005页

作者： Yingchang Li Zicao Xing Nengjun Yu Zesong Ren Minxiang Pan Qiong Wu Hongliang Ge Minggang Zhu Wei Li College of materials and Chemistry China jiliang UniversityHangzhou 310018China Division of Functional materials research Central Iron and Steel Research InstituteBeijing 100081China

A novel micro structure of magnetically anisotropic Sm Co-based magnet with high-performance is *** magnet consists of SmCo_(7)-H(TbCu_(7)-hexagonal type),Sm_(2)Co_(17)-H(Th_(2)Ni_(17)-hexagonal type)and SmCo_(3)-R(SmCo_(3)-rhombohedral type)*** maximum magnetic energy product of the magnet is 231.69 kj/m^(3),and the intrinsic coercivity is 1005.47 kA/*** outstanding intrinsic coercivity temperature coefficient(β)of-0.125%/K between 298 and 773 K is obtained,which is very close to theβof commercial high-temperature Sm_(2)Co_(17)-based sintered *** initial magnetization curve indicates that the coercivity mechanism is controlled by a domain wall pinning *** SmCo_(3)-R lamellar phase may be a potential pinning center or self-pinning *** microstructure of the magnet is different from that of any previous SmCo-based *** findings provide a new idea for preparing high-performance SmCo-based permanent magnets.

关键词： Rare earths Permanent magnet Composite magnet Melt-spinning Microstructure

Plasmon-enhanced ultra-high photoresponse of single-wall carbon nanotube/copper/silicon near-infrared photodetectors

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第7期17卷 5930-5936页

作者： Yi-Ming Zhao Xian-Gang Hu Chao Chen Zuo-Hua Wang An-Ping Wu Hong-Wang Zhang Peng-Xiang Hou Chang Liu Hui-Ming Cheng Shenyang national Laboratory for materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China national Engineering research Center for Equipment and Technology of Cold Strip Rolling College of Mechanical EngineeringYanshan UniversityQinhuangdao 066004China Faculty of materials Science and Engineering/institute of Technology for Carbon Neutrality Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Single wall carbon nanotube(SWCNT)/Si heterojunction photodetectors have the advantages of high photoresponse ability and simple structure,however,their detection wavelength range are usually lower than 1100 nm,which limits their application in the infrared *** report a SWCNT/Cu/Si photodetector with both a high photoresponse and a detection range up to the infrared band by depositing a Cu nanoparticles(NPs)layer between a SWCNT film and a n-Si *** was found that the Cu NPs produce strong surface plasmon resonance(SPR)under laser irradiation,which breaks through the limitation of Si band gap and greatly improves the photoresponse of the SWCNT/Cu/Si photodetector in the near infrared *** responsivity(R)of the photodetector in the wavelength range of 1850–1200 nm reached 2.2–14.15 mA/W,which is the highest value in the reported plasmon enhanced n-Si based photodetectors,and about 20,000 times higher than that of a SWCNT/Si *** R value for 1550 nm wavelength used in optical communications reached~8.2 mA/W,which is 64%higher than the previously reported values of commonly used *** attribute the significant increase to the strong SPR and low Schottky barrier of Cu with n-Si,which facilitates the generation and transfer of the carriers.

关键词： single wall carbon nanotube photodetector silicon surface plasmon resonance copper

Stable operation of highly loaded pure Si-Fe anode under ambient pressure via carboxy silane-directed robust solid electrolyte interphase

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 568-576页

作者： Guntae Lim Dong Guk Kang Hyeon Gyu Lee Yen Hai Thi Tran Kihun An Junghyun Choi Kwang Chul Roh Do Youb Kim Seung-Wan Song Department of Chemical Engineering&Applied Chemistry Chungnam national University Daejeon 34134Republic of Korea Energy Storage materials Center Korea Institute of Ceramic Engineering&TechnologyJinju 52851Republic of Korea Advanced Energy materials research Center Korea Research Institute of Chemical TechnologyDaejeon 34114Republic of Korea

Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability ***,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on *** stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only ***-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.

关键词： High-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling

An overview and experimental analysis of WO3/TiO2 composite with enhanced electrochromic properties for smart windows application

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第4期6卷 732-747页

作者： Ayesha Khan Mayur A.Gaikwad Jin Hyeok Kim Anamika Kadam The institute of Science Dr.Homi Bhabha State University Optoelectronics Convergence research Center and Department of materials Science and Engineering Chonnam National University

Internationally,standards for electrochromic（EC） requirements in smart window applications have been established,with ongoing global initiatives aimed at elevating them to highly advanced *** paper covers a comprehensive investigation of the structural,optical,morphological,and electrochemical properties of WO3/TiO2composite ***,an experimental analysis of WO3/TiO2was envisaged by a two-step ***,WO3thin films were hydrothermally deposited onto indium-doped tin oxide-coated glass substrates using an aqueous solution of Na2WO4·2H2O at a pH value of ***,a layer of TiO2was electrodeposited onto the WO3thin films.X-ray diffraction analysis confirmed the successful formation of WO3/TiO2composite films,with the WO3phase exhibiting a hexagonal tunnel *** electron microscopy revealed the formation of porous nanorods（NRs） of WO3,uniformly coated with TiO2,resulting in a porous morphology of the WO./*** EC performance of the WO3/TiO2films was thoroughly assessed through cyclic voltammetry and chronoamperometry measurements over a potential window ranging from-2.0 to+1.2 V（versus Ag/AgCl） in a 0.5 mol·L-1LiClO4-PC *** WO3/TiO2composite films exhibited cathodic electrochromism,characterized by a reversible color change from dark blue to *** improved EC performance in comparison to pure WO3films is attributed to enhanced double ion/electron insertion and extraction ***,the WO3/TiO2composite films demonstrated excellent optical modulation properties,with a significant modulation at 633 nm（46.87%）.The coloration efficiency reached a high value of 193.25 cm2·C-1,indicating their potential for practical EC ***,the WO3/TiO2composite films displayed exceptional EC stability,with no significant degradation observed over 2500 cyclic voltammetry *** superior EC performance can be attributed to the synergistic effect between the hexagonal WO3NRs

关键词： Electrochromism Smart window Stability WO3/TiO2

Aging Behavior of As-Extruded Ti Particles Reinforced VW94 Composites

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 401-406页

作者： Dongmei Pu Xianhua Chen Jingfeng Wang Jun Tan Jianbo Li Hong Yang Bo Feng Kaihong Zheng Fusheng Pan College of materials Science and Engineering Chongqing UniversityChongqing 400045China national Engineering research Center for Magnesium Alloys Chongqing UniversityChongqing 400045China institute of New materials Guangdong Academy of SciencesGuangzhou 510650China

The ageing behavior of as-extruded Ti_(P)/VW94 composites was *** peak hardness of the composites increases compared to the matrix alloy and the 5%Ti_(P)/VW94 composite presents the highest peak hardness of 148.7 HV after aging for about 50 ***,the hardness increments first decrease and then slightly increase with increasing Ti particle content due to the introduction of high-density dislocations by Ti particles.

关键词： Magnesium matrix composites Ti particles Ageing behavior Hardness

Investigation of the Corrosion and Passive Behavior of HP-13Cr Stainless Steel in Formate Annulus Protection Fluid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1087-1103页

作者： Jidong Wang Tengfei Yin Wenlong Qi Xuanpeng Li Yang Zhao Tao Zhang Fuhui Wang Shenyang national Laboratory for materials Science Northeastern UniversityShenyang110819China State Key Laboratory of Performance and Structural Safety for Petroleum Tubular Goods and Equipment materials Tubular Goods Research InstituteCNPCXi’an710077China

The corrosion and passive behavior of HP-13Cr stainless steel(HP-13Cr SS)in formate annulus protection fluid was ***-13Cr SS exhibited good passive behavior in clean formate annulus protection fluid,which was attributed to a thinner and more dense passive film mainly composed of Cr_(2)O_(3).In the formation water solution,the passive film was composed of metastable Cr(OH)3,which was explained by the isoelectric point theory,resulting in the deterioration of the passive behavior of HP-13Cr *** the formation water penetrated the formate annulus protection fluid,a large number of loose FeCO_(3)particles formed in the corrosion scales,thus HP-13Cr SS suffered severe ***,avoiding formation water penetrating the formate annulus protection fluid is conducive to improving the service life of HP-13Cr SS oil tubes in extremely aggressive environment.

关键词： HP-13Cr SS Passive behavior Formate annulus protection fluid Isoelectric point