检索结果-南通市图书馆

Effect of Progressive Substitution of Cement and Lime by Powdered Shells Used as a Curing Agent for Dredged Soil in a Port Area

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 88-102页

作者： SUN Yang WANG Faxin SU Yaying LI Yiwei HE Feng College of Harbour Coastal and Offshore EngineeringHohai UniversityNanjing 210098China Huai'an research Institute Hohai UniversityHuai'an 223025China Jiangsu Fangyang industrial Investment Corp.Ltd. Lianyungang 210098China

This study aimed to address the challenges of solid waste utilization,cost reduction,and carbon reduction in the treatment of deep-dredged soil at Xuwei Port in Lianyungang city of *** research in this area was ***,a curing agent made from powdered shells was used to solidify the dredged soil in *** employed laboratory orthogonal tests to investigate the physical and mechanical properties of the powdered shell-based curing *** was collected by conducting experiments to assess the role of powdered shells in the curing process and to determine the optimal ratios of powdered shells to solidified soil for different *** development of strength in solidified soil was studied in both seawater and pure water *** study revealed that the strength of the solidified soil was influenced by the substitution rate of powdered shells and their interaction with *** cement content had a positive effect on *** high-strength solidified soil,the recommended ratio of wet soil:cement:lime:powdered shells were 100:16:4:4,while for low-strength solidified soil,the recommended ratio was 100:5.4:2.4:***,under appropriate conditions,improved short-term strength by promoting the formation of expansive ettringite minerals that contributed to cementation and *** findings suggest that the combination of cement and powdered shells is synergistic,positively affecting the strength of solidified *** recommended ratios provide practical guidance for achieving desired strength levels while considering factors such as cost and carbon *** role of seawater in enhancing short-term strength through crystal formation is noteworthy and can be advantageous for certain *** conclusion,this research demonstrates the potential of using a powdered shell-based curing agent for solidifying dredged soil in an environmentally friendly and cost-effective *** recommended ratios for different str

关键词： carbon reduction and solidification dredged soil abandoned shells orthogonal test chemical additives(lime and cement) unconfined compressive strength(UCS)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

engineering N3C vacancies in hierarchical porous carbon nitride nanosheets for room temperature ultradeep photocatalytic aerobic oxidative desulfurization

引用

Science China Chemistry 2025年

作者： Yina Nie Weijie Yang Xin Wang Xiang Li Lele Wei Xiaolin Bai Lin Liu Feng Fu Jun Wan College of Chemistry & Chemical engineering Research Institute of Comprehensive Energy Industrial Technology Shaanxi Key Laboratory of Chemical Reaction Engineering Yan'an University Anhui engineering research Center of Carbon Neutrality College of Chemistry and Materials Science Anhui Normal University

The production of ultra-low sulfur clean fuels holds global significance for improving energy efficiency and reducing environmental pollution. Photocatalytic aerobic oxidative desulfurization（PODS） offers an attractive approach to efficiently remove refractory heterocyclic aromatic sulfur compounds under mild conditions. However, the sluggish charge dynamics,insufficient molecule activation, and slow mass transfer within photocatalysts restrict the overall desulfurization efficiency,hindering the widespread application of this technology. Herein, we developed a defective g-C3N4（M1U3CN） photocatalyst with bridged N3Cvacancies and hierarchical porous structures to address these limitations. This catalyst not only demonstrates outstanding dibenzothiophene（DBT） removal efficiency of 99.6% for model oil with high conversion and selectivity but also achieves complete sulfur removal from gasoline as well as 96.7% sulfur removal for distilled diesel at room temperature,successfully achieving ultradeep aerobic oxidative desulfurization. The introduction of rich N3Cvacancies and abundant micromeso-macroporous distribution in M1U3CN enhances kinetic efficiencies by promoting charge carrier separation, mass transfer,and molecular activation simultaneously; resulting in exceptional PODS performance. This work provides a collaborative strategy to overcome kinetic challenges in aerobic oxidative desulfurization via defect and structural engineering of the catalyst.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He Department of Materials Science and engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core research Facilities Southern University of Science and Technology Department of Chemical Sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Perovskite

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Establishing a new testing protocol of the electrochemical stability window for electric double-layer capacitors

引用

Science China Chemistry 2025年第1期68卷 217-225页

作者： Ruilin Hou Xiaoxi Zhao Tingting Liang Qingyun Dou Shan Xu Xingbin Yan School of Materials Science and engineering Sun Yat-sen University Laboratory of Clean Energy Chemistry and Materials Lanzhou Institute of Chemical Physics Chinese Academy of Sciences College of engineering and Applied Sciences Nanjing University Center of industrial Analysis and Testing Guangdong Academy of Science

The electrochemical stability window(ESW) is crucial for determining the energy density of electric double-layer capacitors(EDLCs). However, current ESW testing protocols of EDLCs are strongly affected by artificial factors, thereby leading to unreliable result. To solve this problem, we first identify the key shortcomings of the traditional protocols by analyzing their test principles. Subsequently, taking an aqueous carbon-based EDLC as an example, we design a side reaction descriptor to represent the response difference in the charging capacitance to side reactions between the cyclic voltammetry and galvanostatic chargedischarge methods. With the aid of this descriptor, we propose a new ESW testing protocol, which is not only able to completely avoid the adverse influence of subjective factors but also fully consider the operating condition limitations. The protocol can be extended from the single electrode to the full device. This work proposes a more rigorous definition of ESW and provides a reliable protocol for evaluating the ESW of EDLCs.

关键词： electric double-layer capacitors electrochemical stability window testing protocol side reaction descriptor operating limitation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Recent advances of metal vacancies in energy and environmental catalysis:Synthesis,characterization,and roles

引用

Green Energy & Environment 2025年第1期10卷 84-108页

作者： Long Sun Shunzheng Zhao Sirui Gao Ronghui Zhu Yiran Tan Xiaolong Tang Honghong Yi School of Energy and Environmental engineering University of Science and Technology BeijingBeijing100083China Beijing Key Laboratory of Resource-oriented Treatment of industrial Pollutants Beijing100083China

With the ongoing depletion of fossil fuels,energy and environmental issues have become increasingly critical,necessitating the search for effective ***,being one of the hallmarks of modern industry,offers a promising avenue for ***,the question of how to significantly enhance the performance of catalysts has gradually drawn the attention of *** engineering,a commonly employed and effective approach to improve catalyst activity,has become a significant research focus in the catalysis field in recent *** vacancies have received extensive attention due to their simple ***,exploration of metal vacancies has remained stagnant for a considerable period,resulting in a scarcity of comprehensive reviews on this ***,based on the latest research findings,this paper summarizes and consolidates the construction strategies for metal vacancies,characterization techniques,and their roles in typical energy and environmental catalytic ***,it outlines potential challenges in the future,aiming to provide valuable references for researchers interested in investigating metal vacancies.

关键词： Metal vacancies Catalysis Construction strategies Characterization techniques Roles

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

引用

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won Department of Chemical and Biological engineering Korea University Department of Chemical engineering (Integrated process) Kyung Hee University Department of Chemical engineering and Materials Science Ewha Womans University Department of Chemical engineering Pukyong National University Resources engineering Plant research Department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Carbon capture and utilization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy:Microstructural and mechanical characterization

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 414-424页

作者： Gianluca Pirro Alessandra Martucci Alessandro Morri Mariangela Lombardi Lorella Ceschini Department of industrial engineering(DIN) Alma Mater Studiorum-University of BolognaBologna 40136Italy Department of Applied Science and Technology(DISAT) Politecnico di TorinoTorino TO 10129Italy

Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)*** alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat *** as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the ***,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar *** primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation *** study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar *** each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase *** attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after *** tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed *** surface analyses were conducted to investigate fracture mechanisms.

关键词： powder bed fusion-laser beam titanium alloys heat treatments mechanical properties fractographic analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Transforming waste particles into valuable adsorbents via amyloid-mediated molecular engineering

引用

Science China Chemistry 2025年第1期68卷 317-328页

作者： Qingmin Yang Jian Zhao Yujia Zhang Xingyu Zhou Hao Ren Bowen Hu Zhongli Lei Lixin Chen Peng Yang School of Material and Chemical engineering Bengbu University Anhui Provincial engineering Laboratory of Silicon-Based Materials School of Chemistry and Chemical engineering Northwestern Polytechnical University Key Laboratory of Applied Surface and Colloid Chemistry Ministry of Education School of Chemistry and Chemical EngineeringShaanxi Normal University Xi'an Key Laboratory of Polymeric Soft Matter School of Chemistry and Chemical Engineering Shaanxi Normal University International Joint research Center on Functional Fiber and Soft Smart Textile School of Chemistry and Chemical EngineeringShaanxi Normal University

The high-value utilization of industrial solid waste using a facile and eco-friendly process is of great interest and significance in reducing environmental pollution and developing a green circular economy. Herein, we propose an amyloid-mediated molecular engineering strategy to transform particulate waste into valuable adsorbents for metal ions. Our method has the advantage of aqueous solution fabrication under mild conditions without the use of high-temperature hydrothermal methods and toxic chemical reagents. Amyloid-mediated molecular engineering manipulates the phase transition of bovine serum albumin(BSA)on particulate waste surfaces, resulting in a remarkable ～3.1 times improvement in the adsorption capacity of fly ash, a typical industrial solid waste for gold ions after modification with the phase-transitioned BSA(PTB). The resultant adsorption ability was 69–1,980 times higher than those of conventional and emerging adsorbent materials such as ion exchange resins, activated carbon(AC), covalent organic frameworks(COFs), and metal-organic frameworks(MOFs). We further demonstrated the application of our PTB-modified materials in the recovery of precious metals from low-grade gold ore and electronic waste leachates. Consequently, this strategy could increase the value of waste materials nearly 27 times. In addition, this method is generally extendable to other conventional industrial adsorbents such as resin, clay, and Al2O3, and enhances their adsorption capabilities at least twofold. Overall, this work provides a simple and green approach for improving the adsorption performance of solid particles, and is expected to develop into a universal strategy for transforming waste particles into high-value-added products.

关键词： amyloid-like protein aggregates surface engineering fly ash solid waste adsorption

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

industrial Control Anomaly Detection Based on Distributed Linear Deep Learning

引用

Computers, Materials & Continua 2025年第1期82卷 1129-1150页

作者： Shijie Tang Yong Ding Huiyong Wang School of Computer Science and Information Security Guilin University of Electronic TechnologyGuilin541004China School of Electronic engineering and Automation Guilin University of Electronic TechnologyGuilin541004China Guangxi engineering research Center of industrial Internet Security and Blockchain Guilin University of Electronic TechnologyGuilin541004China Institute of Cyberspace Technology HKCT Institute for Higher EducationHong Kong999077China School of Mathematics&Computing Science Guilin University of Electronic TechnologyGuilin541004China

As more and more devices in Cyber-Physical Systems(CPS)are connected to the Internet,physical components such as programmable logic controller(PLC),sensors,and actuators are facing greater risks of network attacks,and fast and accurate attack detection techniques are *** key problem in distinguishing between normal and abnormal sequences is to model sequential changes in a large and diverse field of time *** address this issue,we propose an anomaly detection method based on distributed deep *** method uses a bilateral filtering algorithm for sequential sequences to remove noise in the time series,which can maintain the edge of discrete *** use a distributed linear deep learning model to establish a sequential prediction model and adjust the threshold for anomaly detection based on the prediction error of the validation *** method can not only detect abnormal attacks but also locate the sensors that cause *** conducted experiments on the Secure Water Treatment(SWAT)and Water Distribution(WADI)public *** experimental results show that our method is superior to the baseline method in identifying the types of attacks and detecting efficiency.

关键词： Anomaly detection CPS deep learning MLP(multi-layer perceptron)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 214-220页

作者： Chao Tan Junling Lü Chunchi Zhang Dong Liang Lei Yang Zegao Wang College of Materials Science and engineering Sichuan UniversityChengdu 610065China The 54th research Institute of China Electronics Technology Group Corporation Shijiazhuang 050081China

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other ***-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate ***,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of *** we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor *** systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 *** sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on ***,there was almost no performance loss for the device as left in the air for two months.

关键词： flexible gate dielectric transistor force sensor impulse sensor force sensor array

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：