检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He department of Materials Science and engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology department of Chemical Sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Perovskite

A Bayesian expectation maximization algorithm for state estimation of intelligent vehicles considering data loss and noise uncertainty

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年

作者： Yan WANG Feng TIAN Jianqiang WANG Keqiang LI department of industrial and Systems engineering The Hong Kong Polytechnic University School of Vehicle and Mobility Tsinghua University

Sideslip angle, yaw rate, and vehicle velocity are essential for intelligent vehicle control. Since these vehicle states are not measured directly, some Kalman-based approaches have been developed to estimate these states using in-vehicle sensors. However, the existing studies seldom account for the influence of sensor data loss on estimation accuracy. In addition,the process and measurement noise change during the estimation process because of the various driving conditions. To address these problems, an expectation-maximization robust extended Kalman filter (EMREKF) is proposed. Firstly, a robust extended Kalman filter (REKF) is developed to deal with the impact of missing measurements. Then, an improved expectation maximization (EM) algorithm that considers data loss is presented to update the noise parameter of the REKF dynamically. Finally,the improved EM is fused with the REKF to form the EMREKF to estimate vehicle state. The experimental results demonstrate that the EMREKF outperforms EKF, REKF, and maximum correntropy criterion EKF for various degrees of data loss and the proposed algorithm has a strong adaptive ability to different driving conditions.

关键词：

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won department of Chemical and Biological engineering Korea University department of Chemical engineering (Integrated process) Kyung Hee University department of Chemical engineering and Materials Science Ewha Womans University department of Chemical engineering Pukyong National University Resources engineering Plant Research department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Carbon capture and utilization

Secure Channel Estimation Using Norm Estimation Model for 5G Next Generation Wireless Networks

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2025年第1期82卷 1151-1169页

作者： Khalil Ullah Song Jian Muhammad Naeem Ul Hassan Suliman Khan Mohammad Babar Arshad Ahmad Shafiq Ahmad Faculty of Information engineering and Automation Kunming University of Science and TechnologyKunming650500China department of Computer Science Abbottabad University of Science and TechnologyHavelianAbbottabad22500Pakistan department of Computing and Electronics engineering Middle East CollegeMuscat124Oman department of CS&IT Pak-Austria Fachhochschule Institute of Applied Sciences and Technology MangHaripur22621Pakistan industrial engineering department College of EngineeringKing Saud UniversityRiyadh11421Saudi Arabia

The emergence of next generation networks(NextG),including 5G and beyond,is reshaping the technological landscape of cellular and mobile *** networks are sufficiently scaled to interconnect billions of users and *** in academia and industry are focusing on technological advancements to achieve highspeed transmission,cell planning,and latency reduction to facilitate emerging applications such as virtual reality,the metaverse,smart cities,smart health,and autonomous *** continuously improves its network functionality to support these *** input multiple output(MIMO)technology offers spectral efficiency,dependability,and overall performance in *** article proposes a secure channel estimation technique in MIMO topology using a norm-estimation model to provide comprehensive insights into protecting NextG network components against adversarial *** technique aims to create long-lasting and secure NextG networks using this extended *** viability of MIMO applications and modern AI-driven methodologies to combat cybersecurity threats are explored in this ***,the proposed model demonstrates high performance in terms of reliability and accuracy,with a 20%reduction in the MalOut-RealOut-Diff metric compared to existing state-of-the-art techniques.

关键词： Next generation networks massive mimo communication network artificial intelligence 5G adversarial attacks channel estimation information security

Tuning the interfacial reaction environment via pH-dependent and induced ions to understand C–N bonds coupling performance in NO3- integrated CO2 reduction to carbon and nitrogen compounds over dual Cu-based N-doped carbon catalyst

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 273-285页

作者： Tianhang Zhou Chen Shen Zhenghao Wu Xingying Lan Yi Xiao College of Carbon Neutrality Future Technology State Key Laboratory of Heavy Oil Processing China University of Petroleum (Beijing) Institute of Materials Science TU Darmstadt department of Chemistry Xi'an Jiaotong-Liverpool University department of Mechanical and mechatronics engineering and Waterloo Institute of Nanotechnology University of Waterloo Waterloo

Dual atomic catalysts （DAC）,particularly copper （Cu2）-based nitrogen （N） doped graphene,show great potential to effectively convert CO2and nitrate （NO3-） into important industrial chemicals such as ethylene,glycol,acetamide,and urea through an efficient catalytical process that involves C–C and C–N ***,the origin of the coupling activity remained unclear,which substantially hinders the rational design of Cu-based catalysts for the N-integrated CO2reduction reaction （CO2RR）.To address this challenge,this work performed advanced density functional theory calculations incorporating explicit solvation based on a Cu2-based N-doped carbon (Cu2N6C10) catalyst for *** calculations are aimed to gain insight into the reaction mechanisms for the synthesis of ethylene,acetamide,and urea via coupling in the interfacial reaction *** to the sluggishness of CO2,the formation of a solvation electric layer by anions （F-,Cl-,Br-,and I-） and cations (Na+,Mg2+,K+,and Ca2+) leads to electron transfer towards the Cu *** process significantly accelerates the reduction of *** results reveal that*CO intermediates play a pivotal role in N-integrated ***,the Cu2-based N-doped carbon catalyst examined in this study has demonstrated the most potential for C–N coupling to *** findings reveal that through the process of a condensation reaction between*CO and NH2OH for urea synthesis,*NO3-is reduced to*NH3,and*CO2to*CCO at dual Cu atom *** dual-site reduction facilitates the synthesis of acetamide through a nucleophilic reaction between NH3and the ketene ***,we found that the I-and Mg2+ions,influenced by pH,were highly effective for acetamide and ammonia synthesis,except when F-and Ca2+were ***,the mechanisms of C–N bond formation were investigated via ab-initio molecular dynamics simulations,and we found that adjusting the micro-environment can change the dominant side reaction,shift

关键词： Condensation reactions

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy:Microstructural and mechanical characterization

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 414-424页

作者： Gianluca Pirro Alessandra Martucci Alessandro Morri Mariangela Lombardi Lorella Ceschini department of industrial engineering(DIN) Alma Mater Studiorum-University of BolognaBologna 40136Italy department of Applied Science and Technology(DISAT) Politecnico di TorinoTorino TO 10129Italy

Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)*** alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat *** as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the ***,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar *** primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation *** study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar *** each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase *** attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after *** tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed *** surface analyses were conducted to investigate fracture mechanisms.

关键词： powder bed fusion-laser beam titanium alloys heat treatments mechanical properties fractographic analysis

维普期刊数据库

Novel Methodologies for Preventing Crack Propagation in Steel Gas Pipelines Considering the Temperature Effect

在线全文

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 1-23页

作者： Nurlan Zhangabay Ulzhan Ibraimova Marco Bonopera Ulanbator Suleimenov Konstantin Avramov Maryna Chernobryvko Aigerim Yessengali department of Architecture and Urban Planning Mukhtar Auezov South Kazakhstan UniversityShymkent160012Kazakhstan department of industrial Civil and Road Construction Mukhtar Auezov South Kazakhstan UniversityShymkent160012Kazakhstan Mechanics Sound&Vibration LaboratoryDepartment of Civil EngineeringCollege of EngineeringNational Taiwan UniversityTaipei10617Taiwan department of Reability&Dynamic Strength A.Pidhornyi Institute of Mechanical Engineering Problems of National Academy of Sciences of UkraineKharkiv61046Ukraine

Using the software ANSYS-19.2/Explicit Dynamics,this study performedﬁnite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire *** effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also *** results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum *** analysis of the inﬂuence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire *** increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the inﬂuence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline *** analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length *** such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline signiﬁcantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of *** work integrated the existing methods for crack localization along steel gas pipelines.

关键词： Crack propagation ﬁnite-element internal pressure prestressing steel gas pipeline temperature effect

Ru/NiMnB spherical cluster pillar for highly proficient green hydrogen electrocatalyst at high current density

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 397-408页

作者： Md Ahasan Habib Shusen Lin Mehedi Hasan Joni Sumiya Akter Dristy Rutuja Mandavkar Jae-Hun Jeong Jihoon Lee department of Electronic engineering College of Electronics and Information Kwangwoon University

Advanced OER/HER electrocatalytic alternatives are crucial for the wide adaptation of green hydrogen ***,Ru/NiMnB spherical cluster pillar （SCP）,denoted as Ru/NiMnB,is synthesized using a combination of electro-deposition and hydrothermal *** investigation of Ru doping in the NiMnB matrix revealed significant improvements in electrocatalytic *** Ru/NiMnB SCPs demonstrate superior OER/HER activity with low overpotentials of 150 and 103 mV at 50mA/cm2in 1 M KOH,making them highly competitive with state-of-the-art ***,the Ru/NiMnB SCPs exhibit a low 2-E cell voltage of 2.80 V at ultra-high current density of 2,000 m A/cm2in 1 M KOH,outperforming the standard benchmark electrodes of RuO2||Pt/C,thereby positioning Ru/NiMnB as one of the best bifunctional *** SCPs exhibit exceptional high-current characteristics,stability and corrosion resistance,as evidenced by continuous operation at 1,000 mA/cm2high-current density for over 150 h in 6 M KOH at elevated temperatures under harsh industrial *** a small amount of Ru incorporation significantly enhances the electrocatalytic performances of NiMnB,attributed to increased active sites and improved intrinsic properties such as conductivity,adsorption/desorption capability and reaction ***,Ru/NiMnB SCPs present a promising bi-functional electrode concept for efficient green H2production.

关键词： Potassium hydroxide

Effect of Progressive Substitution of Cement and Lime by Powdered Shells Used as a Curing Agent for Dredged Soil in a Port Area

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 88-102页

作者： SUN Yang WANG Faxin SU Yaying LI Yiwei HE Feng College of Harbour Coastal and Offshore EngineeringHohai UniversityNanjing 210098China Huai'an Research Institute Hohai UniversityHuai'an 223025China Jiangsu Fangyang industrial Investment Corp.Ltd. Lianyungang 210098China

This study aimed to address the challenges of solid waste utilization,cost reduction,and carbon reduction in the treatment of deep-dredged soil at Xuwei Port in Lianyungang city of *** research in this area was ***,a curing agent made from powdered shells was used to solidify the dredged soil in *** employed laboratory orthogonal tests to investigate the physical and mechanical properties of the powdered shell-based curing *** was collected by conducting experiments to assess the role of powdered shells in the curing process and to determine the optimal ratios of powdered shells to solidified soil for different *** development of strength in solidified soil was studied in both seawater and pure water *** study revealed that the strength of the solidified soil was influenced by the substitution rate of powdered shells and their interaction with *** cement content had a positive effect on *** high-strength solidified soil,the recommended ratio of wet soil:cement:lime:powdered shells were 100:16:4:4,while for low-strength solidified soil,the recommended ratio was 100:5.4:2.4:***,under appropriate conditions,improved short-term strength by promoting the formation of expansive ettringite minerals that contributed to cementation and *** findings suggest that the combination of cement and powdered shells is synergistic,positively affecting the strength of solidified *** recommended ratios provide practical guidance for achieving desired strength levels while considering factors such as cost and carbon *** role of seawater in enhancing short-term strength through crystal formation is noteworthy and can be advantageous for certain *** conclusion,this research demonstrates the potential of using a powdered shell-based curing agent for solidifying dredged soil in an environmentally friendly and cost-effective *** recommended ratios for different str

关键词： carbon reduction and solidification dredged soil abandoned shells orthogonal test chemical additives(lime and cement) unconfined compressive strength(UCS)

Dynamic Interaction Analysis of Coupled Axial-Torsional-Lateral Mechanical Vibrations in Rotary Drilling Systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 77-103页

作者： Sabrina Meddah Sid Ahmed Tadjer Abdelhakim Idir Kong Fah Tee Mohamed Zinelabidine Doghmane Madjid Kidouche Applied Automation Laboratory Faculty of Hydrocarbons and ChemistryUniversity of BoumerdesBoumerdes35000Algeria Institute of Electrical and Electronic engineering(IGEE) University of BoumerdesBoumerdes35000Algeria Laboratory of the Electrification of industrial Enterprises University of BoumerdesBoumerdes35000Algeria Electrical engineering department Mohamed Boudiaf University of M’silaM’sila28000Algeria department of Civil and Environmental engineering King Fahd University of Petroleum&MineralsDhahran31261Saudi Arabia Interdisciplinary Research Center for Construction and Building Materials King Fahd University of Petroleum&Minerals(KFUPM)Dhahran31261Saudi Arabia

Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and *** achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emphasis on structural durability and monitoring is *** study focuses on the mechanical vibrations that occur in rotary drilling systems,which have a substantial impact on the structural integrity of drilling *** study speciﬁcally investigates axial,torsional,and lateral vibrations,which might lead to negative consequences such as bit-bounce,chaotic whirling,and high-frequency *** events not only hinder the efﬁciency of drilling but also lead to exhaustion and harm to the system’s components since they are difﬁcult to be detected and controlled in real *** study investigates the dynamic interactions of these vibrations,speciﬁcally in their high-frequency modes,usingﬁeld data obtained from measurement while ***ﬁndings have demonstrated the effect of strong coupling between the high-frequency modes of these vibrations on drilling sys-tem *** obtained results highlight the importance of considering the interconnected impacts of these vibrations when designing and implementing robust control ***,integrating these compo-nents can increase the durability of drill bits and drill strings,as well as improve the ability to monitor and detect ***,by exploiting theseﬁndings,the assessment of structural resilience in rotary drilling systems can be ***,the study demonstrates the capacity of structural health monitoring to improve the quality,dependability,and efﬁciency of rotary drilling systems in the petroleum industry.

关键词： Rotary drilling systems mechanical vibrations structural durability dynamic interaction analysis ﬁeld data analysis