检索结果-南通市图书馆

Progressive fragmentation of granular assemblies within rockslides: Insights from discrete-continuous numerical modeling

引用

Journal of Mountain Science 2024年第4期21卷 1174-1189页

作者： JIANG Hui ZHOU Yuande WANG Jinting DU Xiuli HUANG Hailong key laboratory of Urban Security and Disaster Engineering of Ministry of Education Beijing University of TechnologyBeijing 100124China. key laboratory of the Hydrosphere Sciences of the Ministry of Water Resources Tsinghua UniversityBeijing 100084China China Three Gorges Construction Management Co. Ltd.Chengdu 610000China

Rock fragmentation plays a critical role in rock avalanches,yet conventional approaches such as classical granular flow models or the bonded particle model have limitations in accurately characterizing the progressive disintegration and kinematics of multi-deformable rock blocks during rockslides.The present study proposes a discrete-continuous numerical model,based on a cohesive zone model,to explicitly incorporate the progressive fragmentation and intricate interparticle interactions inherent in rockslides.Breakable rock granular assemblies are released along an inclined plane and flow onto a horizontal plane.The numerical scenarios are established to incorporate variations in slope angle,initial height,friction coefficient,and particle number.The evolutions of fragmentation,kinematic,runout and depositional characteristics are quantitatively analyzed and compared with experimental and field data.A positive linear relationship between the equivalent friction coefficient and the apparent friction coefficient is identified.In general,the granular mass predominantly exhibits characteristics of a dense granular flow,with the Savage number exhibiting a decreasing trend as the volume of mass increases.The process of particle breakage gradually occurs in a bottom-up manner,leading to a significant increase in the angular velocities of the rock blocks with increasing depth.The simulation results reproduce the field observations of inverse grading and source stratigraphy preservation in the deposit.We propose a disintegration index that incorporates factors such as drop height,rock mass volume,and rock strength.Our findings demonstrate a consistent linear relationship between this index and the fragmentation degree in all tested scenarios.

关键词： Rock fragmentation Rockslide Numerical modelling Discrete-continuous modelling Runout Cohesive zone model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of carbides and pores on the localized deformation of nickel-based single-crystal superalloys

引用

Progress in Natural Science:Materials International 2024年第3期34卷 562-568页

作者： Rengeng Li Yu Zhang Haoyi Niu Hao Wang Hao Wu key laboratory for Light-weight Materials Nanjing Tech University College of Materials Science and Engineering Chongqing University CRRC Qishuyan Institute Co.Ltd.

The carbides and pores play a critical role in the cracking tendencies of nickel-based single-crystal superalloys during deformation. In the present study, the deformation mechanism and local strain evolution behavior around carbides and pores were studied through in-situ tensile deformation experiments. The findings indicate that multiple slip systems are easily activated during tensile deformation in single-crystal alloys. Furthermore, the strain localization in carbides is influenced by their morphology, with rod-like and flake-like carbides demonstrating an increased likelihood of cracking during deformation. The strain localization adjacent to pores is markedly more intense, rendering these areas particularly susceptible to cracking. Our work therefore offers a theoretical foundation for enhancing the mechanical properties of nickel-based single-crystal superalloys by controlling carbide morphology and pore formation.

关键词： Carbides In-situ tensile Nickel-based single-crystal Pores Strain evolution

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature

引用

Science Bulletin 2024年第2期69卷 227-236页

作者： Yue Ren Qing Zhou Dongpeng Hua Zhuobin Huang Yulong Li Qian Jia Peter Gumbsch Christian Greiner Haifeng Wang Weimin Liu State key laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsNorthwestern Polytechnical UniversityXi’an 710072China Institute for Applied Materials Karlsruhe Institute of TechnologyKarlsruhe 76131Germany IAM-ZM MicroTribology CenterμTC Karlsruhe Institute of TechnologyKarlsruhe 76131Germany Fraunhofer IWM Freiburg 79108Germany State key laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

Traditional high strength engineering alloys suffer from serious surface brittleness and inferior wear performance when servicing under sliding contact at cryogenic temperature.Here,we report that the recently emerging CoCrNi multi-principal element alloy defies this trend and presents dramatically enhanced wear resistance when temperature decreases from 273 to 153 K,surpassing those of cryogenic austenitic steels.The temperature-dependent structure characteristics and deformation mechanisms influencing the cryogenic wear resistance of CoCrNi are clarified through microscopic observation and atomistic simulation.It is found that sliding-induced subsurface structures show distinct scenarios at different deformation temperatures.At cryogenic condition,significant grain refinement and a deep plastic zone give rise to an extended microstructural gradient below the surface,which can accommodate massive sliding deformation,in direct contrast to the strain localization and delamination at 273 K.Meanwhile,the temperature-dependent cryogenic deformation mechanisms(stacking fault networks and phase transformation)also provide additional strengthening and toughening of the subsurface material.These features make the CoCrNi alloy particularly wear resistant at cryogenic conditions and an excellent candidate for safety–critical applications.

关键词： Multi-principal element alloy Cryogenic temperature Wear CoCrNi

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Purification of copper foils driven by single crystallization

引用

Chinese Physics B 2024年第2期33卷 506-511页

作者：寇金宗赵孟泽李兴光何梦林杨方友刘科海成庆秋任云龙刘灿付莹吴慕鸿刘开辉王恩哥 Songshan Lake Materials laboratory Dongguan 523808China Beijing National laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of SciencesBeijing 100190China Guangdong Provincial key laboratory of Quantum Engineering and Quantum Materials School of PhysicsSouth China Normal UniversityGuangzhou 510006China Guangdong–Hong Kong Joint laboratory of Quantum Matter Frontier Research Institute for PhysicsSouth China Normal UniversityGuangzhou 510006China State key laboratory for Mesoscopic Physics Frontiers Science Center for Nano-optoelectronicsSchool of PhysicsPeking UniversityBeijing 100871China key laboratory of Quantum State Construction and Manipulation(Ministry of Education) Department of PhysicsRenmin University of ChinaBeijing 100872China International Center for Quantum Materials Collaborative Innovation Center of Quantum MatterPeking UniversityBeijing 100871China School of Physics Liaoning UniversityShenyang 110036China

High-purity copper(Cu) with excellent thermal and electrical conductivity, is crucial in modern technological applications, including heat exchangers, integrated circuits, and superconducting magnets. The current purification process is mainly based on the zone/electrolytic refining or anion exchange, however, which excessively relies on specific integrated equipment with ultra-high vacuum or chemical solution environment, and is also bothered by external contaminants and energy consumption. Here we report a simple approach to purify the Cu foils from 99.9%(3N) to 99.99%(4N) by a temperature-gradient thermal annealing technique, accompanied by the kinetic evolution of single crystallization of Cu.The success of purification mainly relies on(i) the segregation of elements with low effective distribution coefficient driven by grain-boundary movements and(ii) the high-temperature evaporation of elements with high saturated vapor pressure.The purified Cu foils display higher flexibility(elongation of 70%) and electrical conductivity(104% IACS) than that of the original commercial rolled Cu foils(elongation of 10%, electrical conductivity of ~ 100% IACS). Our results provide an effective strategy to optimize the as-produced metal medium, and therefore will facilitate the potential applications of Cu foils in precision electronic products and high-frequency printed circuit boards.

关键词： purification copper foil thermal annealing technique single crystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A spatiotemporal evolution model of a short-circuit arc to a secondary arc based on the improved charge simulation method

引用

Plasma Science and Technology 2024年第1期26卷 62-73页

作者：丛浩熹王宇轩乔力盼苏文晶李庆民 State key laboratory of Alternate Electrical Power System with Renewable Energy Sources North China Electric Power UniversityBeijing 102206People’s Republic of China

The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.

关键词： short-circuit arc secondary arc stochasticity improved charge simulation method arc time

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds

引用

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 725-736页

作者： Hui Wang Yidi Li Ming Zhang Wei Gong Ruilin Lai Yunping Li State key laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Research Institute of Light Alloy Central South UniversityChangsha 410083China

Additive friction stir deposition(AFSD)is a novel structural repair and manufacturing technology has become a research hotspot at home and abroad in the past five years.In this work,the microstructural evolution and mechanical performance of the Al-Mg-Si alloy plate repaired by the preheating-assisted AFSD process were investigated.To evaluate the tool rotation speed and substrate preheating for repair quality,the AFSD technique was used to additively repair 5 mm depth blind holes on 6061 aluminum alloy substrates.The results showed that preheat-assisted AFSD repair significantly improved joint bonding and joint strength compared to the control non-preheat substrate condition.Moreover,increasing rotation speed was also beneficial to improve the metallurgical bonding of the interface and avoid volume defects.Under preheating conditions,the UTS and elongation were positively correlated with rotation speed.Under the process parameters of preheated substrate and tool rotation speed of 1000 r/min,defect-free specimens could be obtained accompanied by tensile fracture occurring in the substrate rather than the repaired zone.The UTS and elongation reached the maximum values of 164.2MPa and 13.4%,which are equivalent to 99.4%and 140%of the heated substrate,respectively.

关键词： additive friction stir deposition structural repair tool rotation speed Al alloy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of Irregular Coastlines on a Tornadic Mesovortex in the Pearl River Delta during the Monsoon Season. Part Ⅰ:Pre-storm Environment and Storm evolution

引用

Advances in Atmospheric Sciences 2024年第6期41卷 1115-1131页

作者： Lanqiang BAI Dan YAO Zhiyong MENG Yu ZHANG Xianxiang HUANG Zhaoming LI Xiaoding YU Foshan Tornado Research Center and China Meteorological Administration Tornado Key LaboratoryGuangdong Meteorological Serviceand Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Guangdong 528000China Meteorological Observation Centre CMABeijing 100081China Department of Atmospheric and Oceanic Sciences and China Meteorological Administration Tornado Key LaboratorySchool of PhysicsPeking UniversityBeijing 100871China Guangzhou Meteorological Observatory CMAGuangdong 511430China Foshan Tornado Research Center and China Meteorological Administration Tornado Key LaboratoryCMAGuangdong 528000China China Meteorological Administration Training Center CMABeijing 528000China

The Pearl River Delta(PRD),a tornado hotspot,forms a distinct trumpet-shaped coastline that concaves toward the South China Sea.During the summer monsoon season,low-level southwesterlies over the PRD’s sea surface tend to be turned toward the west coast,constituting a convergent wind field along with the landward-side southwesterlies,which influences regional convective weather.This two-part study explores the roles of this unique land–sea contrast of the trumpet-shaped coastline in the formation of a tornadic mesovortex within monsoonal flows in this region.Part I primarily presents observational analyses of pre-storm environments and storm evolutions.The rotating storm developed in a lowshear environment(not ideal for a supercell)under the interactions of three air masses under the influence of the land–sea contrast,monsoon,and storm cold outflows.This intersection zone(or“triple point”)is typically characterized by local enhancements of ambient vertical vorticity and convergence.Based on a rapid-scan X-band phased-array radar,finger-like echoes were recognized shortly after the gust front intruded on the triple point.Developed over the triple point,they rapidly wrapped up with a well-defined low-level mesovortex.It is thus presumed that the triple point may have played roles in the mesovortex genesis,which will be demonstrated in Part II with multiple sensitivity numerical simulations.The findings also suggest that when storms pass over the boundary intersection zone in the PRD,the expected possibility of a rotating storm occurring is relatively high,even in a low-shear environment.Improved knowledge of such environments provides additional guidance to assess the regional tornado risk.

关键词： tornado mesovortex surface boundary land–sea contrast monsoon

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Structural Geology and Chronology of Shear zones along the Shangdan Suture in Qinling Orogenic Belt,China:Implications for Late Mesozoic Intra-Continental Deformation of East Asia

引用

Journal of Earth Science 2024年第2期35卷 376-393页

作者： Falak Sheir Wei Li Le Zhang Basil Alabowsh Liuqing Jiang Li Liang Sainan Gao Shair Baz Umar Ashraf State key laboratory of Continental Dynamics Department of GeologyNorthwest UniversityXi’an710069China Institute of Geology University of PunjabLahore45590Pakistan

The Shangdan suture zone(SDZ)in the Qinling orogenic belt(QOB)is a key to understanding the East Asia tectonic evolution.The SDZ gives information about convergent processes between the North China Block(NCB)and South China Block(SCB).In the Late Mesozoic,several shear zones evolved along the SDZ boundary that helps us comprehend the collisional deformation between the NCB and SCB,which was neglected in previous studies.These shear zones play an essential role in the tectonic evolution of the East Asia continents.This study focuses on the deformation and geochronology of two shear zones distributed along the SDZ,identified in the Shaliangzi and Maanqiao areas.The shear sense indicators and kinematic vorticity numbers(0.54–0.90)suggest these shear zones have sinistral shear and sub-simple shear deformation kinematics.The quartz’s dynamic recrystallization and c-axis fabric analysis in the Maanqiao shear zone(MSZ)revealed that the MSZ experienced deformation under green-schist facies conditions at∼400–500℃.The Shaliangzi shear zone deformed under amphibolite facies at∼500–700℃.The^(40)Ar/^(39)Ar(muscovite-biotite)dating of samples provided a plateau age of 121–123 Ma.Together with previously published data,our results concluded that QOB was dominated by compressional tectonics during the Late Early Cretaceous.Moreover,we suggested that the Siberian Block moved back to the south and Lhasa-Qiantang-Indochina Block to the north,which promoted intra-continental compressional tectonics.

关键词： Qinling orogenic belt Shangdan suture zone shear zone Late Mesozoic intra-continental deformation East Asia tectonics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Scavenging and release of REE and HFSE by Na-metasomatism in magmatic-hydrothermal systems

引用

Fundamental Research 2024年第2期4卷 315-323页

作者： Wu-Bin Yang He-Cai Niu Ning-Bo Li Pete Hollings Shannon Zurevinski Roger H.Mitchell key laboratory of Mineralogy and Metallogeny/Guangdong Provincial key laboratory of Mineral Physics and Materials Guangzhou Institute of GeochemistryChinese Academy of SciencesGuangzhou 510640China CAS Center for Excellence in Deep Earth Science Guangzhou 510640China Department of Geology Lakehead UniversityThunder BayON P7B 5E1Canada

Exploitable or potentially exploitable deposits of critical metals,such as rare-earth(REE)and high-field-strength elements(HFSE),are commonly associated with alkaline or peralkaline igneous rocks.However,the origin,transport and concentration of these metals in peralkaline systems remains poorly understood.This study presents the results of a mineralogical and geochemical investigation of the Na-metasomatism of alkali amphiboles and clinopyroxenes from a barren peralkaline granite pluton in NE China,to assess the remobilization and redistribution of REE and HFSE during magmatic-hydrothermal evolution.Alkali amphiboles and aegirine-augites from the peralkaline granites show evolutionary trends from sodic-calcic to sodic compositions,with increasing REE and HFSE concentrations as a function of increasing Na-index[Na^(#),defined as molar Na/(Na+Ca)ratios].The Na-amphiboles(i.e.,arfvedsonite)and aegirine-augites can be subsequently altered,or breakdown,to form hydrothermal aegirine during late-or post-magmatic alteration.Representative compositions analyzed by insitu LA-ICPMS show that the primary aegirine-augites have high and variable REE(2194-3627 ppm)and HFSE(4194-16,862 ppm)contents,suggesting that these critical metals can be scavenged by alkali amphiboles and aegirine-augites.Compared to the primary aegirine-augites,the presentative early replacement aegirine(Aeg-I,Na^(#)=0.91-0.94)has notably lower REE(1484-1972)and HFSE(4351-5621)contents.In contrast,the late hydrothermal aegirine(Aeg-II,Na^(#)=0.92-0.96)has significantly lower REE(317-456 ppm)and HFSE(6.44-72.2 ppm)contents.Given that the increasing Na^(#)from aegirine-augites to hydrothermal aegirines likely resulted from Na-metasomatism,a scavenging-release model can explain the remobilization of REE and HFSE in peralkaline granitic systems.The scavenging and release of REE and HFSE by Na-metasomatism provides key insights into the genesis of globally significant REE and HFSE deposits.The high Na-index of the hydrothermal aegirine might be useful as a geo

关键词： critical metals Alkali amphiboles Na-metasomatism REE and HFSE Na-index(Na^(#))

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Developmental Patterns and Gender Differences of Vocal Production in Marmoset Monkeys

引用

Neuroscience Bulletin 2024年第1期40卷 133-138页

作者： Ruixin An Chaocheng Lu Chen Wang Liangtang Chang Junfeng Huang Fan Jiang Tian-Le Xu Neng Gong Center for Brain Science Shanghai Children's Medical CenterShanghai Jiao Tong University School of MedicineShanghai 200127China Department of Anatomy and Physiology Shanghai Jiao Tong University School of MedicineShanghai 200025China Department of critical Care Medicine Huashan HospitalFudan University12 Middle Wulumuqi RoadShanghai 200040China Institute of Neuroscience Key Laboratory of Primate NeurobiologyCAS Center for Excellence in Brain Science and Intelligence TechnologyChinese Academy of SciencesShanghai 200031China Lingang laboratory Shanghai 200031China Shanghai Center for Brain Science and Brain-Inspired Technology Shanghai 201210China

Dear Editor,The common marmoset(Callithrix jacchus),a small New World monkey species,is considered an ideal non-human primate model for studying the evolution and neural mechanism of vocal behavior due to their rich call repertoire and vocal communication[1-3].Especially,the early vocal development of marmoset monkeys has attracted much attention,because newborn marmosets have been shown to exhibit a vocal development trajectory.Within two months after birth,marmosets'vocalizations undergo dramatic changes from cries to adult-like mature calls,a process that is influenced not only by inner physical maturation but also by parental care and feedback[4].

关键词： parental birth Pattern

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：