检索结果-南通市图书馆

Energy and exergy analyses and optimizations for two-stage TEC driven by two-stage TEG with Thomson effect

Science China(Technological Sciences) 2024年第4期67卷 1077-1093页

作者： CHEN LinGen GE YanLin FENG HuiJun REN TingTing Institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China hubei provincial engineering technology research center of green chemical equipment Wuhan 430205China School of Mechanical&Electrical engineering Wuhan Institute of TechnologyWuhan 430205China

Based on the non-equilibrium thermodynamics and energy and exergy analyses,a thermodynamic model of two-stage thermoelectric(TE)cooler(TTEC)driven by two-stage TE generator(TTEG)(TTEG-TTEC)combined TE device is established with involving Thomson effect by fitting method of variable physical parameters of TE *** total number of TE elements as constraint,influences of number distributions of TE elements on three device performance indictors,that is,cooling load,maximum COP and maximum exergetic efficiency,are *** number distributions of TE elements are optimized with three maximum performance indictors as the objectives,*** of hot-junction temperature of TTEG and coldjunction temperature of TTEC on optimization results are analyzed,and difference between optimization results corresponding to three performance indicators are *** performance intervals and optimal variable intervals are *** of Thomson effect on three general performance indicators,three optimal performance indicators and optimal variables are comparatively *** effect reduces three general performance indicators and three optimal performance indicators of *** hot-and cold-junction temperatures of TTEG and TTEC are 450,305,325 and 295 K,respectively,Thomson effect reduced maximum cooling load,maximum COP and maximum exergetic efficiency from 9.528 W,9.043×10^(-2)and2.552%to 6.651 W,6.286×10^(-2)and 1.752%,respectively.

关键词： non-equilibrium thermodynamics cooling load COP exergetic efficiency combined thermoelectric device performance optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of a rectangular porous fin considering minimization of maximum temperature difference and pumping power consumption

引用

Science China(Technological Sciences) 2024年第3期67卷 919-929页

作者： LIU XiaoYe FENG HuiJun CHEN LinGen GE YanLin Institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China College of Power engineering Naval University of EngineeringWuhan 430033China hubei provincial engineering technology research center of green chemical equipment Wuhan 430205China School of Mechanical&Electrical engineering Wuhan Institute of TechnologyWuhan 430205China

A heat dissipation model of a rectangular porous fin is established based on constructal theory. First, the constructal design of rectangular porous fin is conducted by selecting a complex function minimization, which composed of linear weighting sum of maximum temperature difference and pumping power consumption, as optimization objective. Effects of gap height, air inlet velocity, total porous fin volume and porosity on the optimal constructs are investigated, respectively. The findings show that the complex function can attain its double minimum at a value of 0.802 when the fin length and number are optimized, and the corresponding optimal fin length and number are 8.01 mm and 10, respectively. In comparison to original design, the complex function and maximum temperature difference after twice optimization are decreased by 19.80% and 66.31%, ***, the comprehensive performance of porous fin is improved by simultaneously optimizing the fin length and number. The artificial neural network is applied to predict the fin performances, which is used to conduct multi-objective optimization based on NSGA-II algorithm. Optimal structure of porous fin for multiple requirements is gained by LINMAP and TOPSIS decisionmaking strategies. The findings in this study can serve as theoretical guides for fin thermal designs of electronic devices.

关键词： constructal theory rectangular porous fin pumping power consumption maximum temperature difference complex function multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of a rectangular parallel phase change microchannel in a three-dimensional electronic device

引用

Science China(Technological Sciences) 2024年第5期67卷 1381-1390页

作者： ZHANG JiWen FENG HuiJun CHEN LinGen GE YanLin Institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan430205China College of Power engineering Naval University of EngineeringWuhan430033China hubei provincial engineering technology research center of green chemical equipment Wuhan430205China School of Mechanical&Electrical engineering Wuhan Institute of TechnologyWuhan430205China

Based on constructal theory,a rectangular parallel phase change microchannel model in a three-dimensional electronic device(TDED)is established with R134a as the cooling *** on the minimization of a complex function(CF)composed of linear weighting sum of maximum temperature difference and pumping power consumption,constructal design of the TDED is conducted first;and then,maximum temperature difference and pumping power consumption are minimized by non-dominated sorting genetic algorithm-II *** results reveal that there exist an optimal mass flow rate(0.0012 kg/s)and a quadratic optimal aspect ratio(AR)(0.39)of the microchannel which lead to quadratic minimum CF(0.817).Compared with the original value,the CF after optimization is reduced by 18.34%.Reducing the inlet temperature of cooling fluid and microchannel number appropriately can help to enhance the overall performance of *** using the artificial neural network and genetic algorithms in the toolboxes of Matlab software,the optimal AR gained in the Pareto solution set is located between 0.2–*** smallest deviation index among three discussed strategies is 0.346,and the corresponding optimal AR is 0.413,which is selected as the optimal design strategy of the microchannel in the TDED under multiple *** findings in this study can serve as theoretical guides for thermal designs of electronic devices.

关键词： constructal theory parallel microchannel evaporation phase change three-dimensional electronic device multi-objective optimization artificial neural network

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of printed circuit recuperator for S-CO_(2)cycle via multi-objective optimization algorithm

引用

Science China(Technological Sciences) 2024年第1期67卷 285-294页

作者： DAN ZhiSong FENG HuiJun CHEN LinGen LIAO NaiBing GE YanLin Institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China College of Power engineering Naval University of EngineeringWuhan 430033China hubei provincial engineering technology research center of green chemical equipment Wuhan 430205China School of Mechanical&Electrical engineering Wuhan Institute of TechnologyWuhan 430205China AECC Hunan Aviation Powerplant research Institute Zhuzhou 412002China

Based on a constructal theory,the structure design of a printed circuit recuperator with a semicircular heat transfer channel for supercritical CO_(2)cycle is carried ***,a complex function composed of weighted sum of the reciprocal of total heat transfer rate and total pumping power consumption is regarded as an optimization objective,and total volumes of the recuperator and heat transfer channel are regarded as *** optimal heat transfer channel radius and minimum complex function of the recuperator are *** turns out that heat transfer rate,pumping power consumption,and complex function under the optimal construct of recuperator are reduced by 15.10%,82.44%,and 32.33%,*** exists the optimal single plate channel number which results in the double minimum complex ***,for the purpose of minimizing the reciprocal of heat transfer rate and pumping power consumption,NSGA-II algorithm is used to achieve multi-objective optimization,and the minimum deviation index derived by the decision-making methods is 0.076,which can be taken as multi-objective optimal design scheme for printed circuit recuperator with semicircular heat transfer *** findings presented here can serve as theoretical recommendations for the structure design of printed circuit recuperator.

关键词： constructal theory supercritical CO_(2)cycle printed circuit heat exchanger heat transfer rate pumping power consumption multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-objective constructal design for quadrilateral heat generation body based on thermal-entransy theory and NSGA-Ⅱ

引用

Science China Technological Sciences 2024年第9期67卷 2777-2786页

作者： CHEN LinGen ZHU HongWei GE YanLin SHI ShuangShuang FENG HuiJun Institute of Thermal Science and Power engineering Wuhan Institute of Technology hubei provincial engineering technology research center of green chemical equipment School of Mechanical & Electrical engineering Wuhan Institute of Technology

Based on thermal-entransy theory, the multi-objective constructal design of quadrilateral heat generation body(HGB) with similar shapes of leaves is studied further. The relationship between the aspect ratio of quadrilateral HGB and average temperature difference based on thermal-entransy dissipation is compared with that between the aspect ratio of quadrilateral HGB and the maximum temperature difference(MTD). The relationship between a composite function, consisting of linear weighting sum of the average temperature difference and MTD, and aspect ratio is obtained, and the optimal aspect ratios under minimum composite function with different weighting coefficients are obtained. Using the NSGA-Ⅱ algorithm, the Pareto frontier containing a series of compromise results of average temperature difference and MTD is obtained, and optimization results are compared using the deviation index. There is no aspect ratio to make both MTD and average temperature difference reach the minimum, and the optimal aspect ratio under the minimum MTD is smaller than that under the minimum average temperature difference. The optimal aspect ratio is obtained by making the composite function reach the minimum, and the optimal aspect ratios obtained by minimizing the composite function with different weighting coefficients are different. Compared with the construct of the initial design, the value of the composite function with optimal construct decreases by 1.9%, and the aspect ratio of the quadrilateral HGB decreases by 9.1%. The average temperature difference with the optimal construct increases by 2.1%, and the MTD with the optimal construct decreases by 5.6%. The deviation index under multi-objective optimization is smaller than that under single-objective optimization, and the obtained construct has better comprehensive thermal conductivity. Compared with TOPSIS and LINMAP decision-making methods, the average temperature difference with composite function optimization increases by 0.5

关键词： thermal-entransy theory constructal theory heat conduction quadrilateral heat generation body composite function NSGA-II

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Experimental and theoretical investigation of sulfur-doped g-C_(3)N_(4)nanosheets/FeCo_(2)O_(4)nanorods S-scheme heterojunction for photocatalytic H_(2)evolution

引用

Nano research 2024年第9期17卷 8007-8016页

作者： Haitao Wang Lianglang Yu Jiahe Peng Jing Zou Weiping Gong Jizhou Jiang School of Chemistry and Environmental engineering School of Environmental Ecology and Biological EngineeringKey Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationNovel Catalytic Materials of Hubei Engineering Research CenterWuhan Institute of TechnologyWuhan 430205China Guangdong provincial Key Laboratory for Electronic Functional Materials and Devices Huizhou UniversityHuizhou 516007China

g-C_(3)N_(4)emerges as a promising metal-free semiconductor photocatalyst due to its cost-effectiveness,facile synthesis,suitable visible light response,and robust thermal ***,its practical application in photocatalytic hydrogen evolution reaction(HER)is impeded by rapid carrier recombination and limited light absorption *** this study,we successfully develop a novel g-C_(3)N_(4)-based step-scheme(S-scheme)heterojunction comprising two-dimensional(2D)sulfur-doped g-C_(3)N_(4)nanosheets(SCN)and one-dimensional(1D)FeCo_(2)O_(4)nanorods(FeCo_(2)O_(4)),demonstrating enhanced photocatalytic HER *** engineered SCN/FeCo_(2)O_(4)S-scheme heterojunction features a well-defined 2D/1D heterogeneous interface facilitating directed interfacial electron transfer from FeCo_(2)O_(4)to SCN,driven by the lower Fermi level of SCN compared to FeCo_(2)O_(4).This establishment of electron-interacting 2D/1D S-scheme heterojunction not only facilitates the separation and migration of photogenerated carriers,but also enhances visible-light absorption and mitigates electron-hole pair *** structure analysis and density functional theory calculations corroborate that the carrier migration in the SCN/FeCo_(2)O_(4)photocatalyst adheres to a typical S-scheme heterojunction mechanism,effectively retaining highly reactive photogenerated ***,the optimized SCN/FeCo_(2)O_(4)heterojunction exhibits a substantially high hydrogen production rate of 6303.5μmol·g^(-1)·h^(-1)under visible light excitation,which is 2.4 times higher than that of the ***,the conjecture of the S-scheme mechanism is confirmed by in situ XPS *** 2D/1D S-scheme heterojunction established in this study provides valuable insights into the development of high-efficiency carbon-based catalysts for diverse energy conversion and storage applications.

关键词： g-C_(3)N_(4) FeCo_(2)O_(4) S-scheme heterojunction photocatalytic hydrogen evolution reaction(HER)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defects in the grain interiors of 3 mol%yttria-stabilized tetragonal zirconia polycrystal ceramics with 0.25 wt%alumina

引用

Journal of Advanced Ceramics 2024年第4期13卷 469-477页

作者： Yan Xiong Lian Luo Yao Cheng Zhi Liu Qi Liu Weimin Wang Wei Ji School of Materials&chemical engineering Hubei Province Key Laboratory of Green Materials for Light IndustryHubei University of TechnologyWuhan 430068China Fujian Institute of research on the Structure of Mater Chinese Academy of SciencesFuzhou 350002China Jiangxi provincial engineering research center for Multifunction Zirconia Materials Jiangxi Size Materials Co.Ltd.Jiujiang 332500China State Key Laboratory of Advance technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The presence of high-density defects is rarely observed in bulk 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TZP)ceramics obtained through conventional pressureless *** the present work,fine-grained dense 147 nm 3Y-TZP ceramics were prepared by pressureless sintering of commercial 0.25 wt%alumina-doped zirconia powders at 1300℃.A novel discovery was reported in which large amounts of defects were present in the grain interiors of the *** phenomenon was further examined using three types of powder samples,and the reasons for defect formation were investigated by microstructural characterization using high-resolution transmission electron microscopy(HRTEM)analysis and Rietveld *** results confirmed the essential dependence of the defect formation on the alumina *** authors attributed the defect formation to the significant difference in ionic radii of the solvent and solute during the dissolution of alumina into the zirconia *** sintering kinetics were proposed to be enhanced by the presence of substantial defects,which consequently favored the low-temperature sintering of the alumina-doped zirconia ceramics.

关键词： 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TzP)ceramics alumina addition microstructure defect

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

引用

Journal of Wuhan University of technology(Materials Science) 2024年第4期39卷 854-862页

作者：闵捷 YUAN Wenxu CHEN Yufei LAN Yapeng YAN Mengdi LIU Hanze CHENG Xudong 代路 hubei provincial Key Laboratory of green Materials for Light Industry Hubei University of TechnologyWuhan 430068China Col-laborative Innovation center of green Light-weight Materials and Processing Hubei University of TechnologyWuhan 430068China School of Materials and chemical engineering Hubei University of TechnologyWuhan 430068China School of Industrial Design Hu-bei University of TechnologyWuhan 430068China State Key Laboratory of Advanced technology for Materials Synthesis and Process-ing Wuhan University of TechnologyWuhan 430070China Science and technology on Thermal Energy and Power Laboratory Wuhan Second Ship Design&Research InstituteWuhan 430205China

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron *** coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to *** surface of the deposited coatings is flat without obvious *** absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is *** heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the *** absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is *** coatings do not fail under this condition and have certain thermal stability.

关键词： AlMoON coating preparation thermal stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Physical-Rheological Properties and Performances of Rejuvenated(Styrene-Butadiene-Styrene)Asphalt with Polymerized-MDI and Aromatic Oil

引用

Fluid Dynamics & Materials Processing 2024年第7期20卷 1633-1646页

作者： Ao Lu Ming Xiong Chen Chen Liangjiang Li Haibei Tan Xiong Xu hubei Regional Management Headquarters CCCC Asset Management Co.Ltd.Beijing101399China School of Civil engineering and Architecture Wuhan Institute of TechnologyWuhan430073China hubei provincial engineering research center for green Civil engineering Materials and Structures Wuhan Institute of TechnologyWuhan430073China

Traditional asphalt rejuvenators,like aromatic oil(AO),are known to be effective in improving the low-temperature properties and fatigue performances of aged SBS(styrene-butadiene-styrene)modified asphalt(SBSMA)binders and ***,these rejuvenators inevitably compromise their high-temperature properties and deformation resistances because they dilute asphalt binder but do not fix the damaged structures of aged *** this study,a highly-active chemical called polymerized 4,4-diphenylmethane diisocyanate(PMDI)was used to assist the traditional AO asphalt *** physical and rheological characteristics of rejuvenated SBSMA binders and the moisture-induced damage and rut deformation performances of corresponding mixtures were comparatively *** results showed that the increasing proportion of AO compromises the hightemperature property and hardness of aged SBSMA binder,and an appropriate amount of PMDI works to compensate such losses;3%rejuvenator at mass ratio of AO:PMDI=70:30 can have a rejuvenated SBSMA binder with a high-temperature performance similar to that of fresh binder,approximately at 71.4°C;the use of AO can help reduce the viscosity of PMDI rejuvenated SBSMA binder for improving its workability;PMDI can help improve the resistance of AO rejuvenated SBSMA binder to deformation,especially at elevated temperatures,through its chemical reactions with aged SBS;moisture induction can enhance the resistance to damage of rejuvenated mixtures containing AO/PMDI or only PMDI;and the rejuvenator with a mass ratio of AO:PMDI=70:30 can lead the rejuvenated mixture to meet the application requirement,with a rut depth of only 2.973 mm,although more PMDI can result in a higher resistance of rejuvenated mixtures to high-temperature deformation.

关键词： Aged SBS modified asphalt polymerized 4,4-diphenylmethane diisocyanate aromatic oil physical properties rheological properties mixture performance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

green synthesis of luminescent La-MOF nanoparticle from waste poly(ethylene terephthalate) for high-performance in Fe(Ⅲ) detection

引用

Rare Metals 2024年第8期43卷 3833-3843页

作者： Zhi Gong Zhi-Kui Dai Zhi-Yue Dong Qiu-Xuan Liu Valentin AMilichko Hua-Jian Liu Jie Liu Ran Niu Jiang Gong Key Laboratory of Material Chemistry for Energy Conversion and Storage Hubei Key Laboratory of Material Chemistry and Service FailureHubei Engineering Research Center for Biomaterials and Medical Protective MaterialsSemiconductor Chemistry CenterSchool of Chemistry and Chemical EngineeringMinistry of EducationHuazhong University of Science and TechnologyWuhan 430074China School of chemical engineering and Pharmacy Wuhan Institute of TechnologyWuhan 430073China Collaborative Innovation center for Advanced Organic chemical Materials Co-constructed by the Province and Ministry Ministry of Education Key Laboratory for the Synthesis and Application of Organic Functional Molecules and College of Chemistry and Chemical EngineeringHubei UniversityWuhan 430062China School of Physics and engineering ITMO UniversitySt.Petersburg197101Russia School of Materials Science and engineering Hubei UniversityWuhan430062China Guangdong provincial Key Laboratory of Technique and equipment for Macromolecular Advanced Manufacturing School of Mechanical and Automotive EngineeringKey Laboratory of Polymer Processing EngineeringMinistry of EducationSouth China University of TechnologyGuangzhou 510641China

Developing luminescent metal-organic frameworks(MOFs) capable of high-efficiency Fe^(3+)sensing has aroused great attraction in the fields of biology,chemistry,***,previous solvothermal methods are limited by organic solvent usage,time consuming,high pressure,and high-energy ***,we propose the waste-toMOF strategy towards the scale-up production of La-MOF nanoparticles through the ball milling of recycled poly(-ethylene terephthalate)(PET) bottles and La(NO_(3))_(3)·_(6)H_(2)*** goes on alkaline hydrolysis to form 1,4-benzenedicarboxylic acid sodium salt(Na_(2)BDC) and ethylene glycol by ball ***,BDC reacts with La^(3+)to form *** as-prepared La-MOF crystal nanoparticles possess a rod-like morphology with the size of few hundred ***,La-MOF nanoparticles display high selectivity and sensitivity for Fe^(3+)*** quenching constant and limit of detection are 5.29×10^(3)(mol·L^(-1))^(-1) and 0.147 μmol·L^(-1),respectively,thus surpassing many advanced Fe^(3+) *** to the result of density functional theory,the high Fe^(3+) detection performance of La-MOF is related to the complexing of Fe^(3+)with La-MOF,which leads to the gradual dissociation of the coordination bond between terephthalic acid and La^(3+).It is anticipated that the mechanochemistry milling-based wasteto-MOF strategy provides a new platform for the massive production of functional MOFs in a green manner.

关键词： Metal-organic framework Waste polyester Mechanochemistry milling Fluorescence sensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：