检索结果-南通市图书馆

Cryogenic and conventional milling of AZ91 magnesium alloy

Journal of Magnesium and Alloys 2024年第6期12卷 2503-2519页

作者： Vikas Marakini Srinivasa Pai P Gururaj Bolar Bhaskara P Achar Department of Mechanical Engineering Nitte(Deemed to be University)NMAM Institute of Technology(NMAMIT)Nitte 574110India Department of Mechanical and Industrial Engineering Manipal Institute of TechnologyManipal Academy of Higher EducationManipal 576104India

Use of magnesium is the need of the hour due to its low density as well as its high strength-to-weight and stiffness-to-weight ratio *** study focuses on the effectiveness of liquid nitrogen(LN_(2))assisted cryogenic machining on the surface integrity(SI)characteristics of AZ91 magnesium *** milling using uncoated carbide inserts have been performed under liquid nitrogen(LN_(2))assisted cryogenic condition and compared with conventional(dry)*** are performed using machining parameters in terms of cutting speeds of 325,475,625 m/min,feed rates of 0.05,0.1,0.15 mm/teeth and depth of cuts of 0.5,1,1.5 mm *** significant surface integrity characteristics such as surface roughness,microhardness,microstructure,and residual stresses have been *** of SI characteristics with respect to milling parameters have been identified using statistical technique such as ANOVA and signal-to-noise(S/N)ratio ***,the multi criteria decision making(MCDM)techniques such as additive ratio assessment method(ARAS)and complex proportional assessment(COPRAS)have been utilized to identify the optimal conditions for milling AZ91 magnesium alloy under both dry and cryogenic *** of LN_(2)during machining,resulted in reduction in machining temperature by upto 29%with a temperature drop from 251.2℃under dry condition to 178.5℃in cryogenic *** showed the advantage of performing cryogenic milling in improving the surface integrity to a significant *** machining considerably minimized the roughness by upto 28%and maximised the microhardness by upto 23%,when compared to dry *** speed has caused significant impact on surface roughness(95.33%-dry,92.92%-cryogenic)and surface microhardness(80.33%-dry,82.15%-cryogenic).Due to the reduction in machining temperature,cryogenic condition resulted in compressive residual stresses(maximumσ║=-113 MPa)on the alloy *** indicate no

关键词： Magnesium alloy Cryogenic machining Roughness Microhardness Microstructure Residual stress Multi criteria decision making

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effectiveness of external prestressing in enhancing the non-ductile hanger failure mechanism in reinforced concrete inverted T-beams

引用

Frontiers of Structural and Civil Engineering 2024年第7期18卷 1050-1065页

作者： Ahmed M.ATTA Reda N.BEHIRY Mohammed I.HARAZ Structural Engineering Department Faculty of EngineeringTanta UniversityTanta 33511Egypt Nile higher institute for Engineering and technology Mansoura 11001Egypt

Recently,inverted T-beams have been used in reinforced concrete(RC)bridges to support transverse precast *** T-beams,contrary to practice with conventional beams,are loaded on the flanges upper *** loading configuration causes hanger failure due to the generation of vertical tensile stresses near the bottom of the *** key purpose of this study is to investigate the efficiency of vertical external prestressing stainless-steel bars in mitigating non-ductile hanger failure in reinforced concrete inverted *** experimental study on six inverted-T beams,including two un-strengthened specimens,was carried *** study showed that the value of the prestressing level had a considerable impact on the performance of hanger mechanism in relation to crack pattern,ultimate loads,cracking behavior,load-deflection,strains,and *** experimental results indicated that the suggested method for strengthening inverted T-beams had efficacy in reducing the seriousness of the non-ductile hanger failure and resulted in a strength increase of up to 53% when compared to that of the un-strengthened ***,two analytical models for estimating the hanger capacity and the average crack width of the strengthened RC inverted T-beams were *** models that were proposed exhibited a high degree of agreement with the experimental results.

关键词： RC bridges inverted T-beams strengthening hanger failure external prestressing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

DeepRice: A deep learning and deep feature based classification of Rice leaf disease subtypes

引用

Artificial Intelligence in Agriculture 2024年第1期11卷 34-49页

作者： P.Isaac Ritharson Kumudha Raimond X.Anitha Mary Jennifer Eunice Robert Andrew J Department of CSE Karunya institute of technology and Sciences CoimbatoreTamilnaduIndia Department of Robotics Engineering Karunya Institute of Technology and SciencesCoimbatoreIndia Department of Mechatronics Engineering Manipal Institute of TechnologyManipal Academy of Higher EducationManipalKarnataka 576104India Department of Computer Science and Engineering Manipal Institute of TechnologyManipal Academy of Higher EducationManipalKarnataka 576104India

Rice stands as a crucial staple food globally,with its enduring sustainability hinging on the prompt detection of rice leaf ***,efficiently detecting diseases when they have already occurred holds paramount importance for solving the cost of manual visual identification and chemical *** the recent past,the identification of leaf pathologies in crops predominantly relies on manual methods using specialized equipment,which proves to be time-consuming and *** study offers a remedy by harnessing Deep Learning(DL)and transfer learning techniques to accurately identify and classify rice leaf diseases.A comprehensive dataset comprising 5932 self-generated images of rice leaves was assembled along with the benchmark datasets,categorized into 9 classes irrespective of the extent of disease spread across the *** classes encompass diverse states including healthy leaves,mild and severe blight,mild and severe tungro,mild and severe blast,as well as mild and severe brown *** meticulous manual labelling and dataset segmentation,which was validated by horticulture experts,data augmentation strategies were implemented to amplify the number of *** datasets were subjected to evaluation using the proposed tailored Convolutional Neural Networks *** performance are scrutinized in conjunction with alternative transfer learning approaches like VGG16,Xception,ResNet50,DenseNet121,Inception ResnetV2,and Inception *** effectiveness of the proposed custom VGG16 model was gauged by its capacity to generalize to unseen images,yielding an exceptional accuracy of 99.94%,surpassing the benchmarks set by existing state-of-the-art ***,the layer wise feature extraction is also visualized as the interpretable AI.

关键词： Rice leaf disease Deep learning CNN Crop yield Agriculture Food security

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Source localization based on field signatures:Laboratory ultrasonic validation

引用

Journal of Electronic Science and technology 2024年第3期22卷 47-56页

作者： Mahmoud Eissa Dmitry Sukhanov Department of Radiophysics Tomsk State UniversityTomsk634050Russia higher institute for Applied Sciences and technology(HIAST) Damascus31983Syria

Location awareness in wireless networks is essential for emergency services,navigation,gaming,and many other *** article presents a method for source localization based on measuring the amplitude-phase distribution of the field at the base *** existing scatterers in the target area create unique scattered field interference at each source *** unique field interference at each source location results in a unique field signature at the base station which is used for source *** the proposed method,the target area is divided into a grid with a step of less than half the *** grid node is characterized by its field signature at the base *** signatures corresponding to all nodes are normalized and stored in the base station as fingerprints for source *** normalization of the field signatures avoids the need for time synchronization between the base station and the *** a source transmits signals,the generated field signature at the base station is normalized and then correlated with the stored *** maximum correlation value is given by the node to which the source is the *** simulations and results of experiments on ultrasonic waves in the air show that the ultrasonic source is correctly localized using broadband field signatures with one base station and without time *** proposed method is potentially applicable for indoor localization and navigation of mobile robots.

关键词： Base station Field signature Fingerprints Localization Ultrasonic frequencies

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

LeafSpotNet:A deep learning framework for detecting leaf spot disease in jasmine plants

引用

Artificial Intelligence in Agriculture 2024年第2期12卷 1-18页

作者： Shwetha V Arnav Bhagwat Vijaya Laxmi Department of Electrical and Electronics Engineering Manipal Institute of TechnologyManipalManipal Academy of Higher EducationManipal 576104KarnatakaIndia

Leaf blight spot disease,caused by bacteria and fungi,poses a threat to plant health,leading to leaf discoloration and diminished agricultural *** response,we present a MobileNetV3 based classifier designed for the Jasmine plant,leveraging lightweight Convolutional Neural Networks(CNNs)to accurately identify disease *** model integrates depth wise convolution layers and max pool layers for enhanced feature extraction,focusing on crucial low level features indicative of the *** preprocessing techniques,including data augmentation with Conditional GAN and Particle Swarm Optimization for feature selection,the classifier achieves robust *** on curated datasets demonstrates an outstanding 97%training accuracy,highlighting its *** world testing with diverse conditions,such as extreme camera angles and varied lighting,attests to the model's resilience,yielding test accuracies between 94%and 96%.The dataset's tailored design for CNN based classification ensures result ***,the model's lightweight classification,marked by fast computation time and reduced size,positions it as an efficient solution for real time *** comprehensive approach underscores the proposed classifier's significance in addressing leaf blight spot dis-ease challenges in commercial crops.

关键词： CNN Detection Leaf CGAN Augmentation Classification Swarm optimization Disease detection Tomato leaf Casava leaf

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Solar-driven photothermal catalytic CO_(2) conversion:a review

引用

Rare Metals 2024年第7期43卷 2913-2939页

作者： Bachirou Guene Lougou Bo-Xi Geng Ru-Ming Pan Wei Wang Tian-Tian Yan Fang-Hua Li Hao Zhang Oraléou SanguéDjandja Yong Shuai Meisam Tabatabaei Daniel Sabi Takou School of Energy Science and Engineering Harbin Institute of TechnologyHarbin 150001China MIIT Key Laboratory of Critical Materials technology for New Energy Conversion and Storage Harbin Institute of TechnologyHarbin 150001China State Key Laboratory of Urban Water Resource and Environment Harbin Institute of TechnologyHarbin 150090China School of Electrical Engineering and Automation Harbin Institute of TechnologyHarbin 150001China Guangdong Provincial Key Laboratory of Distributed Energy Systems Engineering Research Center of None-Food Biomass Efficient Pyrolysis and Utilization Technology of Guangdong Higher Education InstitutesDongguan University of TechnologyDongguan 523808China higher Institution Centre of Excellence(HICoE) Institute of Tropical Aquaculture and Fisheries(AKUATROP)Universiti Malaysia Terengganu21030 Kuala NerusMalaysia Department of Biomaterials Saveetha Dental CollegeSaveetha Institute of Medical and Technical SciencesChennai600077India école Polytechnique d'Abomey-Calavi University of Abomey-Calavi2009CotonouBenin

It is highly desirable to seek green and sustainable technologies,such as employing photo thermal effects to drive energy catalysis processes to address the high energy demand and associated environmental impacts induced by the current *** photothermocatalysis process is an emerging research area with great potential in efficiently converting solar energy through various catalytic ***,achieving simultaneously high conversion efficiency,cyclability,and durability is still a daunting ***,tremendous work is still needed to enhance solar photo thermal catalytic conversion and promote its large-scale *** review developed the principles of coupling solar photon and thermal fields underlying the photothermal effect,exploration of efficient nanocatalysts,development of optofluidic reactor model,and photo thermal synergistic-driven CO_(2) reduction *** ultimate goal was to provide an effective approach that can effectively convert solar energy into photocarriers/hot-electrons and heat,and importantly,can couple them to regulate catalysis reaction pathways toward the production of value-added fuel and chemical energy.

关键词： Photochemistry Photothermal CO_(2)catalytic conversion Nanomaterial Solar fuels and chemicals

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Carbon enhanced nucleophilicity of Na_(3)V_(2)(PO_(4))_(3):A general approach for dendrite-free zinc metal anodes

引用

Journal of Energy Chemistry 2024年第4期91卷 203-212页

作者： Sijun Wang Lingzi Hu Xiaohui Li Dan Qiu Shunhang Qiu Qiancheng Zhou Wenwen Deng Xiaoying Lu Ze Yang Ming Qiu Ying Yu institute of Nanoscience and Nanotechnology School of Physical Science and TechnologyCentral China Normal UniversityWuhan 430079HubeiChina School of Material Science and Engineering Suzhou University of Science and TechnologySuzhou 215000JiangsuChina Faculty of Science and technology Technological and Higher Education Institute of Hong KongHong KongChina

Zincophilic property and high electrical conductivity are both very important parameters to design novel Zn anode for aqueous Zn-ion batteries(AZIBs).However,single material is difficult to exhibit zincophilic property and high electrical conductivity at the same ***,originating from theoretical calculation,a zincophilic particle regulation strategy is proposed to address these limitations and carbon coated Na_(3)V_(2)(PO_(4))_(3)is taken as an example to be a protective layer on zinc metal(NVPC@Zn).Na_(3)V_(2)(PO_(4))_(3)(NVP)is a common cathode material for Zn-ion batteries,which is *** materials not only offer an electron pathway to help Zn deposition onto NVPC surface,but also enhance the zinc nucleophilicity of Na_(3)V_(2)(PO_(4))_(3).Hence,this hybrid coating layer can tune zinc deposition and resist side reactions such as hydrogen generation and Zn metal ***,a symmetrical battery with NVPC@Zn electrode displays highly reversible plating/stripping behavior with a long cycle lifespan over 1800 h at2 mA cm^(-2),much better than carbon and Na_(3)V_(2)(PO_(4))_(3)solely modified Zn *** the Na_(3)V_(2)(PO_(4))_(3)is replaced with zincophobic Al2O3or zincophilic V2O3,the stability of the modified zinc anodes is also *** strategy expands the option of zincophilic materials and provides a general and effective way to stabilize the Zn electrode.

关键词： Zinc-ion batteries Zinc anode Carbon enhanced nucleophilicity Zincophilic particle regulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructing a biofunctionalized 3D-printed gelatin/sodium alginate/chitosan tri-polymer complex scaffold with improvised biological andmechanical properties for bone-tissue engineering

引用

Bio-Design and Manufacturing 2024年第1期7卷 57-73页

作者： Amit Kumar Singh Krishna Pramanik Amit Biswas Centre of Excellence in Tissue Engineering Department of Biotechnology and Medical EngineeringNational Institute of TechnologyRourkela 769008India

Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering *** present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue *** experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and *** resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)*** studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural *** scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue *** tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of *** enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue *** vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold *** addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its pote

关键词： Scaffold Biomaterial Sodium alginate Chitosan Gelatin 3D printing Tissue engineering

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of an alternative NADPH regeneration pathway improves ethanol production in Saccharomyces cerevisiae with xylose metabolic pathway

引用

Synthetic and Systems Biotechnology 2024年第2期9卷 269-276页

作者： Yali Qiu Wei Liu Meiling Wu Haodong Bao Xinhua Sun Qin Dou Hongying Jia Weifeng Liu Yu Shen State Key Laboratory of Microbial technology Institute of Microbial TechnologyShandong UniversityQingdao266237China Advanced medical Research institute Shandong UniversityJinan250012China

Full conversion of glucose and xylose from lignocellulosic hydrolysates is required for obtaining a high ethanol ***,glucose and xylose share flux in the pentose phosphate pathway(PPP)and glycolysis pathway(EMP),with glucose having a competitive advantage in the shared metabolic *** this work,we knocked down ZWF1 to preclude glucose from entering the *** reduced the[NADPH]level and disturbed growth on both glucose or xylose,confirming that the oxidative PPP,which begins with Zwf1p and ultimately leads to CO_(2) production,is the primary source of NADPH in both glucose and *** glucose depletion,gluconeogenesis is necessary to generate glucose-6-phosphate,the substrate of *** re-established the NADPH regeneration pathway by replacing the endogenous NAD^(+)-dependent glyceraldehyde-3-phosphate dehydrogenase(GAPDH)gene TDH3 with heterogenous NADP^(+)-GAPDH genes GDH,gapB,and *** the resulting strains,the strain BZP1(zwf1Δ,tdh3::GDP1)exhibited a similar xylose consumption rate before glucose depletion,but a 1.6-fold increased xylose consumption rate following glucose depletion compared to the original strain BSGX001,and the ethanol yield for total consumed sugars of BZP1 was 13.5%higher than *** suggested that using the EMP instead of PPP to generate NADPH reduces the wasteful metabolic cycle and excess CO_(2)^(++) release from oxidative ***,we used a copper-repressing promoter to modulate the expression of ZWF1 and optimize the timing of turning off the ZWF1,therefore,to determine the competitive equilibrium between glucose-xylose *** strategy allowed fast growth in the early stage of fermentation and low waste in the following stages of fermentation.

关键词： Saccharomyces cerevisiae Xylose Ethanol NADPH Glyceraldehyde-3-phosphate dehydrogenase

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Efficient cold atom source from a single-layer atom chip

引用

Chinese Optics Letters 2024年第6期22卷 103-108页

作者： Petr Skakunenko Darya Bykova Anton Afanasiev Alexey Kalmykov Roman Kirtaev Victor Balykin institute of Spectroscopy Russian Academy of Sciences Moscow 108840Russia Moscow institute of Physics and technology Moscow 141700Russia Skolkovo institute of Science and technology Moscow 121205Russia National Research University higher School of Economics Moscow 101000Russia Present affiliation:Emerging Technologies Research Center XPANCEODubaiUnited Arab Emirates

We developed a new single-layer atom chip with an additional U-shaped current-carrying *** new U-shaped microwire creates optimized magnetic field distribution,which increases the trapping volume of a magneto-optical trap(MOT) near the *** approach allows one to localize more atoms,while a setup remains relatively simple (single-layer approach) and consumes low current (up to 10 A). The total number of trapped^(87)Rb atoms in our setup is 5×10^(7).

关键词： atom chip cold atoms laser cooling magneto-optical trap U-MOT

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：