检索结果-南通市图书馆

Particuology 2024年第7期90卷 404-411页

作者： Hanqiao Che Yuanhe Yue Zhaohua Jiang Duan Li School of Mechanical Engineering Guangxi UniversityNanningGuangxi530004China School of Chemical Engineering University of BirminghamBirminghamB152TTUK hebei Engineering Research Center of Advanced energy Storage technology and Equipment School of Energy and Environmental EngineeringHebei University of TechnologyTianjin300401China hebei key laboratory of Thermal Science and energy Clean Utilization School of Energy and Environmental EngineeringHebei University of TechnologyTianjin300401China School of Mechatronics and Vehicle Engineering Chongqing Jiaotong UniversityChongqing400074China School of Instrumentation and Opto-Electronic Engineering Beihang UniversityBeijing 100191China

The transient heat transfer behaviours in a packed bed have been studied using coupled computational fluid dynamics(CFD)and discrete element method(DEM).Intra-particle thermal diffusion,which is a crucial but rarely explored issue,is considered by introducing a one-dimensional diffusion equation in the DEM *** achieve a sufficiently long physical time of simulations,we further reduce the computational cost by applying periodic boundary condition to a small segment of the packed *** study demonstrates a shifting peak heat flow rate from the bottom to the top of the packed bed during the initial warming *** affirm that the influence of thermal diffusion within a particle is noteworthy only for particles exhibiting a high Biot number(e.g.,Bi=1.2).This insight enriches our understanding of heat transfer mechanisms in packed beds and their practical engineering applications.

关键词： Packed bed Intra-particle heat transfer CFD–DEM

Solid solution strategy modulated defects engineering of(Cr_(1-x)V_(x))_(2)AlC MAX phase toward superior electromagnetic wave absorption

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3205-3219页

作者： Ji-Lin Gou Yu-Kai Chang Shu Liu Peng-Hui Li Ping-Hao Cui Qian-Ku Hu Li-Bo Wang Xin Zhang Jun-Kai Wang Qi-Xun Xia Ai-Guo Zhou School of Materials Science and Engineering Henan Polytechnic UniversityJiaozuo 454003China key laboratory for Microstructural Material physics of hebei Province School of ScienceYanshan UniversityQinhuangdao 066004China State key laboratory of Metastable Materials Science and technology Yanshan UniversityQinhuangdao 066004China

Defects engineering is an effective strategy for manipulating electromagnetic parameters and enhancing electromagnetic wave(EMW)absorption ***,the relationship between them is not clear,especially in solid solution *** this work,a series of(Cr_(1-x)V_(x))_(2)AlC MAX phase solid solutions with layered structure were prepared via tuning the ratio of Cr and V to explore their EMW absorption *** experimental results indicated that the doping of V atoms at the M-site could effectively regulate its impedance matching and EMW absorption properties by introducing appropriate numbers of defects in the crystal,such as twin boundaries,dislocations and lattice *** them,if Cr:V=3:1,Cr_(1.5)V_(0.5)AlC,as radar absorption materials,could reach a strong reflection loss of-51.8 dB at the frequency of 12.8 GHz under an ultra-thin thickness of 1.3 *** reflection loss value could attain-10 dB in a wide frequency range of 2.7-18 GHz and thickness range of 1-5 *** addition,after high temperature and acid-alkali immersion treatment,this sample still had good EMW absorption capability,and the effective absorption bandwidth was enhanced from 2.3 to 2.6 GHz after concentrated acid immersion or 3.1 GHz after concentrated alkali *** work has great reference significance for the research and development of high-performance MAX-based EMW absorption materials in harsh environments.

关键词： MAX phases Solid solution Defects engineering Electromagnetic wave absorption Harsh environments

Recent advances in nickel-based catalysts in eCO_(2)RR for carbon neutrality

在线全文

学校读者我要写书评

暂无评论

Carbon energy 2024年第2期6卷 61-91页

作者： Weikang Peng Fengfeng Li Shuyi Kong Chenxi Guo Haotian Wu Jiacheng Wang Yi Shen Xianguang Meng Mingxi Zhang hebei key laboratory of Inorganic Nonmetallic Materials School of Materials Science and EngineeringNorth China University of Science and TechnologyTangshanHebeiChina hebei Iron and Steel laboratory North China University of Science and TechnologyTangshanChina State key laboratory of High Performance Ceramics and Superfine Microstructure Shanghai Institute of CeramicsChinese Academy of SciencesShanghaiChina School of Materials Science and Engineering Taizhou UniversityZhejiangChina

The excessive use of nonrenewable energy has brought about serious greenhouse *** CO_(2) into high-value-added chemicals is undoubtedly the best choice to solve energy *** to the excellent cost-effectiveness and dramatic catalytic performance,nickel-based catalysts have been considered as the most promising candidates for the electrocatalytic CO_(2) reduction reaction(eCO_(2)RR).In this work,the electrocatalytic reduction mechanism of CO_(2) over Ni-based materials is *** strategies to improve the eCO_(2)RR performance are ***,the research on Ni-based materials for syngas generation is briefly ***,the prospects of nickel-based materials in the eCO_(2)RR are provided with the hope of improving transition-metal-based electrocatalysts for eCO_(2)RR in the future.

关键词： carbon energy carbon neutrality CO_(2)reduction electrocatalysis nickel-based materials

Ultrafast Laser-Induced Excellent Thermoelectric Performance of PEDOT:PSS Films

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

energy & Environmental Materials 2024年第3期7卷 429-435页

作者： Xuewen Wang Yuzhe Feng Kaili Sun Nianyao Chai Bo Mai Sheng Li Xiangyu Chen Wenyu Zhao Qingjie Zhang State key laboratory of Advanced technology for Materials Synthesis and Processing International School of Materials Science and EngineeringWuhan University of Technology Foshan Xianhu laboratory of the Advanced energy Science and technology Guangdong laboratory

Because poly（3,4-ethylenedioxythiophene）-poly（styrenesulfonate）(PEDOT:PSS)is water processable,thermally stable,and highly conductive,PEDOT:PSS and its composites have been considered to be one of the most promising flexible thermoelectric ***,the PEDOT:PSS film prepared from its commercial aqueous dispersion usually has very low conductivity,thus cannot be directly utilized for TE ***,a simple environmental friendly strategy via femtosecond laser irradiation without any chemical dopants and treatments was *** optimal conditions,the electrical conductivity of the treated film is increased to 803.1 S cm-1from 1.2 S cm-1around three order of magnitude higher,and the power factor is improved to19.0μW m-1K-2,which is enhanced more than 200 *** mechanism for such remarkable enhancement was attributed to the transition of the PEDOT chains from a coil to a linear or expanded coil conformation,reduction of the interplanar stacking distance,and the removal of insulating PSS with increasing the oxidation level of PEDOT,facilitating the charge *** work presents an effective route for fabricating high-performance flexible conductive polymer films and wearable thermoelectric devices.

关键词： electrical conductivity PEDOT:PSS thermoelectric film ultrafast laser irradiation

Regulating solid electrolyte interphase film on fluorinedoped hard carbon anode for sodium-ion battery

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Carbon energy 2024年第6期6卷 200-215页

作者： Cuiyun Yang Wentao Zhong Yuqiao Liu Qiang Deng Qian Cheng Xiaozhao Liu Chenghao Yang Guangzhou key laboratory for Surface Chemistry of energy Materials New Energy Research InstituteSchool of Environment and EnergySouth China University of TechnologyGuangzhouChina

For the performance optimization strategies of hard carbon,heteroatom doping is an effective way to enhance the intrinsic transfer properties of sodium ions and electrons for accelerating the reaction ***,the previous work focuses mainly on the intrinsic physicochemical property changes of the material,but little attention has been paid to the resulting interfacial regulation of the electrode surface,namely the formation of solid electrolyte interphase(SEI)*** this work,element F,which has the highest electronegativity,was chosen as the doping source to,more effectively,tune the electronic structure of the hard *** effect of F-doping on the physicochemical properties of hard carbon was not only systematically analyzed but also investigated with spectroscopy,optics,and in situ characterization techniques to further verify that appropriate F-doping plays a positive role in constructing a homogenous and inorganic-rich SEI *** experimentally demonstrated link between the electronic structure of the electrode and the SEI film properties can reframe the doping optimization strategy as well as provide a new idea for the design of electrode materials with low reduction kinetics to the *** a result,the optimized sample with the appropriate F-doping content exhibits the best electrochemical performance with high capacity(434.53 mA h g^(-1)at 20mA g^(-1))and excellent rate capability(141 mAh g^(-1)at 400 mA g^(-1)).

关键词： F-doping hard carbon reduction kinetics sodium-ion batteries solid electrolyte interphase film

Advancing electrochemical drilling process via coupling of flow field and electric field in pulsating state generated by a novel tube tool

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 542-555页

作者： Liang CHENG Xiaolei CHEN Zhisen YE Yongjun ZHANG State key laboratory of Precision Electronic Manufacturing technology and Equipment Guangdong University of TechnologyGuangzhou 510006China Guangdong key laboratory of Advanced Manufacturing technology of Marine energy Equipment Guangdong University of TechnologyGuangzhou 510006China Guangzhou key laboratory of Nontraditional Machining and Equipment Guangdong University of TechnologyGuangzhou 510006China

This paper introduces an improvement to electrochemical drilling process by coupling flow field and electric field in pulsating state. A novel tube with half-wedged shape at the end(HW-tube) is prepared, with both sidewall and wedged part of the HW-tube insulated. Only the flat part is utilized to provide electric field for electrochemical drilling. By rotating the HW-tube, both flow field and electric field in pulsating state are generated, alternating in different positions within the inter-electrode gap(IEG). The pulsating flow field enhances the mass transfer process, while pulsating electric field disperses material dissolution process and distribution of electrolytic byproducts. Both pulsating fields are coupled at the same frequency, further enhancing the electrochemical drilling process. Simulation results indicate that both flow field and electric field in pulsating state are generated. Compared to the traditional tube, the HW-tube significantly reduces the number of residual particles in IEG, and this number is further reduced by increasing the rotation speed. Experimental results reveal that the surface quality and dimensional uniformity of small hole are improved with HW-tube. With feed rate of 2.22 mm/min, a small hole with diameter of 1.52± 0.017 mm is drilled, resulting in a surface roughness of 0.331 μm.

关键词： Small holes Electrochemical drilling Tools Pulsating flow field Pulsating electric field

Advances in the kinetics of heat and mass transfer in near-continuous complex flows

在线全文

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第4期19卷 187-234页

作者：许爱国张德佳甘延标 National key laboratory of Computational physics Institute of Applied Physics and Computational MathematicsP.O.Box 8009-26Beijing 100088China State key laboratory of Explosion Science and technology Beijing Institute of TechnologyBeijing 100081China HEDPS Center for Applied Physics and Technologyand College of EngineeringPeking UniversityBeijing 100871China State key laboratory for GeoMechanics and Deep Underground Engineering China University of Mining and TechnologyBeijing 100083China National key laboratory of Shock Wave and Detonation physics Mianyang 621999China hebei key laboratory of Trans-Media Aerial Underwater Vehicle School of Liberal Arts and SciencesNorth China Institute of Aerospace EngineeringLangfang 065000China

The study of macro continuous flow has a long ***,the exploration of heat and mass transfer in small systems with a particle number of several hundred or less has gained significant interest in the fields of statistical physics and nonlinear ***,due to absence of suitable methods,the understanding of mesoscale behavior situated between the aforementioned two scenarios,which challenges the physical function of traditional continuous fluid theory and exceeds the simulation capability of microscopic molecular dynamics method,remains considerably *** greatly restricts the evaluation of effects of mesoscale behavior and impedes the development of corresponding regulation *** access the mesoscale behaviors,there are two ways:from large to small and from small to *** the necessity to interface with the prevailing macroscopic continuous modeling currently used in the mechanical engineering community,our study of mesoscale behavior begins from the side closer to the macroscopic continuum,that is from large to *** on some fundamental challenges encountered in modeling and analysis of near-continuous flows,we review the research progress of discrete Boltzmann method(DBM).The ideas and schemes of DBM in coarse-grained modeling and complex physical field analysis are *** relationships,particularly the differences,between DBM and traditional fluid modeling as well as other kinetic methods are *** verification and validation of the method,some applied researches including the development of various physical functions associated with discrete and non-equilibrium effects are *** directions of DBM related studies are indicated.

关键词： near-continuous flow non-equilibrium kinetics discrete Boltzmann method complex physical field analysis

Tendencies of alloyed engineering in BiOX-based photocatalysts:a state-of-the-art review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1488-1512页

作者： Yan-Dong Sun Chao Zeng Xue Zhang Zi-Qi Zhang Bo Yang Sheng-Qi Guo Tianjin key laboratory of Clean energy and Pollutant Control School of Energy and Environmental EngineeringHebei University of TechnologyTianjin300401China State-Province Joint Engineering laboratory of Zeolite Membrane Materials Institute of Advanced MaterialsCollege of Chemistry and Chemical EngineeringJiangxi Normal UniversityNanchang330022China Anhui Province key laboratory of Pollutant Sensitive Materials and Environmental Remediation School of Physics and Electronic InformationAnhui Province Industrial Generic Technology Research Center for Alumics MaterialsHuaibei Normal UniversityHuaibei235000China

energy-saving and environmentally friendly photocatalysis has emerged as a popular research area in response to issues with energy scarcity and environmental *** to the unique layer-like structure,BiOX(Cl,Br,I)is frequently used in ***,inherent flaws in BiOX,such as an inappropriate band gap and low carrier separation efficiency,restrict its capacity for *** to the tunable grouping layer,alloying engineering is employed to optimize the intrinsic properties of BiOX and alloyed BiOX becomes a promising photocatalytic *** review describes the structure of BiOX,where tunable halogen layers provide favorable conditions for the implementation of alloying engineering to improve intrinsic *** article compares the effects and mechanisms of alloying engineering on the optimization of the energy band structure and carrier behavior of BiOX,and lists various modification methods used to improve the optimization of the intrinsic properties by alloying engineering,including defect engineering,morphology control as well as the synergy between alloying and other modification methods(bismuth-rich strategies,cation doping,construction of heterojunctions and plasma resonance effects).Subsequently,applications of alloyed BiOX in energy and environmental fields are summarized,including contaminant degradation,antibacterial,CO_(2)reduction,nitrogen fixation and organic ***,we summarize the current challenges and future directions of alloyed *** is expected that this work will provide guidance and assistance for an in-depth study and understanding of the mechanisms of alloying engineering to optimize intrinsic properties and design alloyed BiOX with higher photocatalytic activity.

关键词： Bismuth oxyhalide Photocatalytic Alloyed engineering Microstructural regulation Application

Multicolor V_(2)O_(5)/TiO_(2)electrochromic films with fast switching and long lifespan for camouflage and information display

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第9期67卷 2807-2817页

作者： Xingru Wang Yang Zheng Lirong Chen Rui Ge Chengyu Jiang Gang Xu Xiudi Xiao School of energy Science and Engineering University of Science and Technology of ChinaHefei230026China Guangdong Provincial key laboratory of New and Renewable energy Research and Development Guangzhou Institute of Energy ConversionChinese Academy of SciencesGuangzhou510640China School of physics and Optoelectronics South China University of TechnologyGuangzhou510640China State key laboratory of Luminescent Materials and Devices South China University of TechnologyGuangzhou510640China

V_(2)O_(5),which has multicolor and energy storage properties,is a promising electrochromic material for multifunctional electrochromic devices,but its practical application is limited by its poor lifespan and long switching *** this work,high-performance V_(2)O_(5)/TiO_(2)films were fabricated by spraying a V_(2)O_(5)solution on in situ-grown TiO_(2)*** to the porous structure formed between the TiO_(2)nanorods and the remarkable electron transfer performance of TiO_(2),the switching time of the V_(2)O_(5)/TiO_(2)films ***,the strong adhesion between the TiO_(2)nanorods and F-doped tin oxide(FTO)glass and the increased surface roughness of the substrates significantly improved the cycling stability of the V_(2)O_(5)/TiO_(2)*** a large transmittance modulation(47.8%at 668 nm),fast response speed(τ_(c)=5.1 s,τ_(b)=4.2 s),and long lifespan,V_(2)O_(5)/TiO_(2)films were used as electrodes for the electrochromic energy storage device(EESD),which switched in six colors through color overlay:dark orange,sandy yellow,green-yellow,yellow-green,dark green,and dark *** by pixel displays,EESDs were designed by segmenting V_(2)O_(5)films to stagger the display of the electrochromic and ion storage layers,which presented 11 types of information based on different combinations of *** work provides inspiration for developing multifunctional electrochromic devices,especially for camouflage and information displays.

关键词： V_(2)O_(5)/TiO_(2)films electrochromic energy storage devices multicolor display

Modulation on electrostatic potential to build a firm bridge at NiO_(x)/perovskite interface for efficient and stable perovskite solar cells

在线全文

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第9期96卷 249-258页

作者： Xiangbao Yuan Xufeng Ling Hongyu Wang Chengxia Shen Ru Li Yehao Deng Shijian Chen Chongqing key laboratory of Interface physics in energy Conversion College of PhysicsChongqing UniversityChongqing 401331China key laboratory of Optoelectronic technology&Systems(Ministry of Education) College of Optoelectronic EngineeringChongqing UniversityChongqing 400044China Center of Modern physics Institute for Smart City of Chongqing University in LiyangLiyang 213300JiangsuChina

The NiO_(x)/perovskite interface in NiO_(x)-based inverted perovskite solar cells(PSCs)is one of the main issues that restrict device performance and long-term stability,as the unwanted interfacial defects and undesirable redox reactions cause severe interfacial non-radiative recombination and open-circuit voltage(Voc)***,a series of self-assembled molecules(SAMs)are employed to bind,bridge,and stabilize the NiO_(x)/perovskite interface by regulating the electrostatic *** on systematically theoretical and experimental studies,4-pyrazolecarboxylic acid(4-PCA)is proven as an efficient molecule to simultaneously passivate the NiO_(x)and perovskite surface traps,release the interfacial tensile stress as well as quench the detrimental interface redox reactions,thus effectively suppressing the interfacial non-radiative recombination and enhancing the quality of perovskite ***,the PSCs with 4-PCA treatment exhibited an eminently increased Voc,leading to a significant increase in power conversion efficiency from 21.28%to 23.77%.Furthermore,the unencapsulated devices maintain 92.6%and 81.3%of their initial PCEs after storing in air with a relative humidity of 20%–30%for 1000 h and heating at 65℃for 500 h in a N_(2)-filled glovebox,respectively.

关键词： Perovskite solar cells Nickel oxide Interface defects passivation Redox reaction Nonradiative recombination