检索结果-南通市图书馆

Study on the clogging mechanism of punching screen in sand control by the punching structure parameters

Petroleum Science 2024年第1期21卷 609-620页

作者： Fu-Cheng Deng Fu-Lin Gui Bai-Tao Fan Lei Wen Sheng-Hong Chen Ning Gong Yun-Chen Xiao Zhi-Hui Xu Yangtze University Jingzhou434023HubeiChina cnooc Research Institute ltd. Beijing100028China cnooc Ener Tech-Drilling&Production Co. Tianjin300457China Tianjin branch of cnooc ltd. Tianjin300459China

As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and gas ***,most screens only consider the influence of the internal sand retaining medium parameters in the sand control performance design while ignoring the influence of the plugging of the punching screen on the overall sand retaining performance of the *** explore the clogging mechanism of the punching screen,this paper established the clogging mechanism calculation model of a single punching screen sand control unit by using the computational fluid mechanics-discrete element method(CFD-DEM)combined *** to the combined motion of particles and fluids,the influence of the internal flow state on particle motion and accumulation was *** results showed that(1)the clogging process of the punching sand control unit is divided into three stages:initial clogging,aggravation of clogging and stability of *** the initial stage of blockage,coarse particles form a loose bridge structure,and blockage often occurs preferentially at the streamline gathering place below chamfering inside the sand control *** the stage of blockage intensification,the particle mass develops into a relatively complete sand bridge,which develops from both ends of the opening to the center of the *** the stable plugging stage,the sand deposits show a“fan shape”and form a“V-shaped”gully inside the punching slot element.(2)Under a certain reservoir particle-size distribution,The slit length and opening height have a large influence on the permeability and blockage rate,while the slit width size has little influence on the permeability and blockage *** microscopic clogging mechanism and its law of the punching screen prevention unit are proposed in this study,which has some field guidance significance for the design of punching screen

关键词： Punching screen Plugging CFD-DEM Size parameter Sand control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study of the blocking mechanism in gravel packing based on CFD-DEM

引用

Particuology 2024年第7期90卷 164-178页

作者： Fucheng Deng Lei Wen Gang Li Baitao Fan Ning Gong Shenghong Chen Yangtze University Jingzhou434023China Guangzhou Institute of Energy Conversion Chinese Academy of Sciences510640China cnooc Research Institute ltd Beijing100028China Tianjin branch of cnooc ltd Tianjin300459China cnooc Ener Tech-Drilling&Production Co Tianjin300457China

Gravel packing sand control(GPSC),as the optimization of mechanical sand control technology,is widely used in the deep water completion and sand control of loose sandstone heavy oil reservoirs and highly *** explore the blocking mechanism of GPSC,the influence of its structural parameters on the blocking of GPSC is *** paper establishes a particle element model based on computational fluid dynamics-discrete element method coupling using the discrete element method and establishes a fluid flow model combined with computational fluid dynamics to realize their full coupling *** sand control experiments were carried out using a micro visual sand control simulation device to verify the blocking *** blocking mechanism is analyzed from the microscopic point of view,and then,the influence of sand control structure parameters on the blocking in GPSC design is *** results show the following:(1)the blocking process of GPSC can be divided into three stages:an initial stage,sand accumulation stage,and equilibrium stage.(2)There are two main types of gravel packing *** first type of blocking is blocking on the surface of the gravel *** particles on the surface of gravel layer mainly exist in the form of large particle size blocking gravel pores and sand particles bridging each *** second type of blockage is the blockage inside the gravel *** particles mainly exist in the form of internal mud cakes and adsorption on gravels inside the gravel layer.(3)To ensure the sand control performance of the gravel layer,the gravel layer thickness is designed between 23 and 28 *** displacement or pressure of the on-site packing pump should be increased to ensure that the gravel layer packing solidity ranges between 59%and 62%.In the design of GPSC,it should be ensured that the median particle size of gravel is 5–6 times the median particle size of *** study provides an effective technical reference for the

关键词： CFD-DEM Blocking the process Blocking mechanism Structural parameter

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical Simulation of Asphaltene Precipitation and Deposition during Natural Gas and CO_(2) Injection

引用

Fluid Dynamics & Materials Processing 2024年第2期20卷 275-292页

作者： Shasha Feng Yi Liao Weixin Liu Jianwen Dai Mingying Xie Li Li Nanhai East Petroleum Research Institute Shenzhen Branch of CNOOC Ltd.Shenzhen518000China

Asphaltene deposition is a signiﬁcant problem during gas injection processes,as it can block the porous medium,the wellbore,and the involved facilities,signiﬁcantly impacting reservoir productivity and ultimate oil *** a few studies have investigated the numerical modeling of this potential effect in porous *** study focuses on asphaltene deposition due to natural gas and CO_(2) *** of the effect of gas injection on asphaltene deposition behavior have been made using a 3D numerical simulation *** results indicate that the injection of natural gas exacerbates asphaltene deposition,leading to a signiﬁcant reduction in permeability near the injection well and throughout the *** reduction in permeability strongly affects the ability of gas toﬂow through the reservoir,resulting in an improvement of the displacement *** displacement efﬁ-ciency of the injection gas process increases by up to 1.40%when gas is injected at 5500 psi,compared to the scenario where the asphaltene model is not ***_(2) injection leads to a miscible process with crude oil,extracting light and intermediate components,which intensiﬁes asphaltene precipitation and increases the viscosity of the remaining crude oil,ultimately reducing the recovery rate.

关键词： Reservoir simulation asphaltenes deposition natural gas injection CO_(2)injection

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Experimental study of the effects of a multistage pore-throat structure on the seepage characteristics of sandstones in the Beibuwan Basin:Insights into the flooding mode

引用

Petroleum Science 2024年第2期21卷 1044-1061页

作者： Lei Wang Xiao Lei Qiao-Liang Zhang Guang-Qing Yao Bo Sui Xiao-Jun Chen Ming-Wei Wang Zhen-Yu Zhou Pan-Rong Wang Xiao-Dong Peng Zhanjiang branch China National Offshore Oil Corporation(CNOOC)LimitedZhanjiang524057GuangdongChina Faculty of Earth Resources China University of Geosciences(Wuhan)Wuhan430074HubeiChina School of Resources and Safety Engineering Chongqing UniversityChongqing400044China School of Engineering University of ManchesterManchester M139WJUK hainan branch China National Offshore Oil Corporation(CNOOC)LimitedHaikou570311HainanChina

To investigate the relationship between grain sizes, seepage capacity, and oil-displacement efficiency in the Liushagang Formation of the Beibuwan Basin, this study identifies the multistage pore-throat structure as a crucial factor through a comparison of oil displacement in microscopic pore-throat experiments. The two-phase flow evaluation method based on the Li-Horne model is utilized to effectively characterize and quantify the seepage characteristics of different reservoirs, closely relating them to the distribution of microscopic pores and throats. It is observed that conglomerate sandstones at different stages exhibit significant heterogeneity and noticeable differences in seepage capacity, highlighting the crucial role played by certain large pore throats in determining seepage capacity and oil displacement efficiency. Furthermore, it was found that the displacement effects of conglomeratic sandstones with strong heterogeneity were inferior to those of conventional homogeneous sandstone, as evidenced by multiple displacement experiments conducted on core samples with varying granularities and flooding systems. Subsequently, core-based experiments on associated gas flooding after water flooding were conducted to address the challenge of achieving satisfactory results in a single displacement mode for reservoirs with significant heterogeneity. The results indicate that the oil recovery rates for associated gas flooding after water flooding increased by 7.3%-16.4% compared with water flooding alone at a gas-oil ratio of approximately 7000 m^(3)/m^(3). Therefore, considering the advantages of gas flooding in terms of seepage capacity, oil exchange ratio, and the potential for two-phase production, gas flooding is recommended as an energy supplement mode for homogeneous reservoirs in the presence of sufficient gas source and appropriate tectonic angle. On the other hand, associated gas flooding after water flooding is suggested to achieve a more favorable develop

关键词： Beibuwan Basin Multistage pore-throat structure Multistage seepage characteristics Microscopic visualization Heterogeneity Gas/water flooding Flooding mode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Remaining Useful Life Prediction Method for Multi-Component System Considering Maintenance:Subsea Christmas Tree System as A Case Study

引用

China Ocean Engineering 2024年第2期38卷 198-209页

作者： WU Qi-bing CAI Bao-ping FAN Hong-yan WANG Guan-nan RAO Xi GE Weifeng SHAO Xiao-yan LIU Yong-hong cnooc Safety Technology Services Co. Ltd.Tianjin 300456China College of Mechanical and Electronic Engineering China University of PetroleumQingdao 266580China cnooc EnerTech Safety&Environmental Protection BranchTianjin 300456China

Maintenance is an important technical measure to maintain and restore the performance status of equipment and ensure the safety of the production process in industrial production,and is an indispensable part of prediction and health ***,most of the existing remaining useful life(RUL)prediction methods assume that there is no maintenance or only perfect maintenance during the whole life cycle;thus,the predicted RUL value of the system is obviously lower than its actual operating *** complex environment of the system further increases the difficulty of maintenance,and its maintenance nodes and maintenance degree are limited by the construction period and working conditions,which increases the difficulty of RUL *** RUL prediction method for a multi-omponent system based on the Wiener process considering maintenance is *** performance degradation model of components is established by a dynamic Bayesian network as the initial model,which solves the uncertainty of insufficient data *** on the experience of experts,the degree of degradation is divided according to Poisson process simulation random failure,and different maintenance strategies are used to estimate a variety of condition maintenance *** example of a subsea tree system is given to verify the effectiveness of the proposed method.

关键词： remaining useful life Wiener process dynamic Bayesian networks maintenance subsea Christmas tree system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-surrogate framework with an adaptive selection mechanism for production optimization

引用

Petroleum Science 2024年第1期21卷 366-383页

作者： Jia-Lin Wang Li-Ming Zhang Kai Zhang Jian Wang Jian-Ping Zhou Wen-Feng Peng Fa-Liang Yin Chao Zhong Xia Yan Pi-Yang Liu Hua-Qing Zhang Yong-Fei Yang Hai Sun School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongChina Qingdao University of Technology Qingdao266580ShandongChina College of Science China University of PetroleumQingdao266580ShandongChina Zepu Oil and Gas Development Department PetroChina Tarim Oilfield CompanyKorla841000XinjiangChina hainan branch of cnooc ltd Haikou70311HainanChina

Data-driven surrogate models that assist with efficient evolutionary algorithms to find the optimal development scheme have been widely used to solve reservoir production optimization ***,existing research suggests that the effectiveness of a surrogate model can vary depending on the complexity of the design problem.A surrogate model that has demonstrated success in one scenario may not perform as well in *** the absence of prior knowledge,finding a promising surrogate model that performs well for an unknown reservoir is ***,the optimization process often relies on a single evolutionary algorithm,which can yield varying results across different *** address these limitations,this paper introduces a novel approach called the multi-surrogate framework with an adaptive selection mechanism(MSFASM)to tackle production optimization *** consists of two *** the first stage,a reduced-dimensional broad learning system(BLS)is used to adaptively select the evolutionary algorithm with the best performance during the current optimization *** the second stage,the multi-objective algorithm,non-dominated sorting genetic algorithm II(NSGA-II),is used as an optimizer to find a set of Pareto solutions with good performance on multiple surrogate models.A novel optimal point criterion is utilized in this stage to select the Pareto solutions,thereby obtaining the desired development schemes without increasing the computational load of the numerical *** two stages are combined using sequential transfer *** the two most important perspectives of an evolutionary algorithm and a surrogate model,the proposed method improves adaptability to optimization problems of various reservoir *** verify the effectiveness of the proposed method,four 100-dimensional benchmark functions and two reservoir models are tested,and the results are compared with those obtained by six other surrogate-model-based *** res

关键词： Production optimization Multi-surrogate models Multi-evolutionary algorithms Dimension reduction Broad learning system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Gel-Based Solidification Technology for Large Fracture Plugging

引用

Fluid Dynamics & Materials Processing 2024年第3期20卷 563-578页

作者： Kunjian Wang Ruibin He Qianhua Liao Kun Xu Wen Wang Kan Chen Tianjin branch of cnooc(China)Co. Ltd.Tianjin300450China Jingzhou Jiahua Technology Co. Ltd.Jingzhou434001China

Fault fractures usually have large openings and considerable extension. Accordingly, cross-linked gel materials aregenerally considered more suitable plugging agents than water-based gels because the latter often undergo contaminationvia formation water, which prevents them from being effective over long times. Hence, in this study, aset of oil-based composite gels based on waste grease and epoxy resin has been developed. These materials havebeen observed to possess high compressive strength and resistance to the aforementioned contamination, therebyleading to notable increase in plugging success rate. The compressive strength, thickening time, and resistance toformation water pollution of these gels have been evaluated indoors. The results show that the compressivestrength of the gel can reach 11 MPa;additionally, the related gelation time can be controlled to be more than3 h, thereby providing a safe construction time;Invasion of formation water has a small effect on the gel strengthand does not shorten the thickening time. All considered performance indicators of the oil-based gel confirm itssuitability as a plugging agent for fault fractures.

关键词： Drilling loss fault fracture oil-based gel compressive strength gel plugging

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Genetic source,migration and accumulation of helium under deep thermal fluid activities:A case study of Ledong diapir area in Yinggehai Basin,South China Sea

引用

Petroleum Exploration and Development 2024年第3期51卷 753-766页

作者： FENG Ziqi HAO Fang HU Lin HU Gaowei ZHANG Yazhen LI Yangming WANG Wei LI Hao XIAO Junjie TIAN Jinqiang State Key Laboratory of Deep Oil and Gas China University of Petroleum(East China)Qingdao 266580China School of Geosciences China University of Petroleum(East China)Qingdao 266580China Laboratory for Marine Mineral Resources Qingdao Marine Science and Technology CenterQingdao 266237China hainan branch of cnooc(China)Co. Ltd.Haikou 570312China

Based on the geochemical parameters and analytical data,the heat conservation equation,mass balance law,Rayleigh fractionation model and other methods were used to quantify the in-situ yield and external flux of crust-derived helium,and the initial He concentration and thermal driving mechanism of mantle-derived helium,in the Ledong Diapir area,the Yinggehai Basin,in order to understand the genetic source,migration and accumulation mechanisms of helium under deep thermal fluid *** average content of mantle-derived He is only 0.0014%,the ^(3)He/^(4)He value is(0.002–2.190)×10^(−6),and the R/Ra value ranges from 0.01 to 1.52,indicating the contribution of mantle-derived He is 0.09%–19.84%,while the proportion of crust-derived helium can reach over 80%.Quantitative analysis indicates that the crust-derived helium is dominated by external input,followed by in-situ production,in the Ledong diapir *** crust-derived helium exhibits an in-situ 4 He yield rate of(7.66–7.95)×10^(−13)cm^(3)/(a·g),an in-situ 4 He yield of(4.10–4.25)×10^(−4)cm^(3)/g,and an external 4 He influx of(5.84–9.06)×10^(−2)cm^(3)/*** results may be related to atmospheric recharge into formation fluid and deep rock-water *** ratio of initial mole volume of 3 He to enthalpy(W)is(0.004–0.018)×10^(−11) cm^(3)/J,and the heat contribution from the deep mantle(X_(M))accounts for 7.63%–36.18%,indicating that deep hot fluid activities drive the migration of mantle-derived 3 *** primary helium migration depends on advection,while the secondary migration is controlled by hydrothermal degassing and gas-liquid *** deep to shallow layers,the CO_(2/3) He value rises from 1.34×10^(9)to 486×10^(9),indicating large amount of CO_(2)has *** the influence of deep thermal fluid,helium migration and accumulation mechanisms include:deep heat driven diffusion,advection release,vertical hydrothermal degassing,shallow lateral migration,accumulation in traps far from faults,

关键词： deep thermal fluid helium genetic source migration and accumulation mechanism Yinggehai Basin

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Origin of condensate oil and natural gas in Bozhong 19-6 gas field,Bohai Bay Basin

引用

Energy Geoscience 2024年第1期5卷 54-62页

作者： Jianyong Xu Wei Li cnooc Research Institute Co.ltd. Beijing100028China

The discovery of the Bozhong 19-6 gas field has opened a new frontier for deep gas exploration in the Bohai Bay Basin,with a great potential for further gas ***,poor understanding of oil and gas origin has been limiting the exploration progress in this *** clarify the origin of condensate oil and gas in Bozhong 19-6 gas field,this study adequately utilized the organic geochemical analysis data to investigate the composition and geochemical characteristics of condensate oil and natural gas,and analyzed the relationship between condensate oil and the three sets of source rocks in the nearby *** show that the lighter components dominate the condensate oil,with a forward type *** parent material of crude oil was primarily deposited in a shallow,clay-rich,low-salinity,weakly reducing aquatic *** condensate and natural gas have similar parent source characteristics and maturity,with Ro ranging from 1.4%to 1.6%.Both are products of high maturity stage,indicating that they are hydrocarbon compounds produced by the same group of source rocks in the same ***-sources correlation shows that condensate oil and gas mainly originate from the source rocks of the third member of Shahejie Formation in the nearby subsags of the Bozhong 19-6 structural belt.

关键词： Bozhong Sag Natural gas Condensate oil Light hydrocarbon Gas-source correlation Oil-source correlation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Paleoenvironmental Characteristics of Paleogene Lacustrine Source Rocks in the Western Bozhong Sag,Bohai Bay Basin,China:Evidence from Biomarkers,Major and Trace Elements

引用

Acta Geologica Sinica(English Edition) 2024年第1期98卷 220-240页

作者： WANG Xiang LIU Guangdi SONG Zezhang SUN Mingliang WANG Xiaolin WANG Feilong CHEN Rongtao GENG Mingyang LI Yishu State Key Laboratory of Petroleum Resources and Prospecting China University of PetroleumBeijing 102249China College of Geosciences China University of PetroleumBeijing 102249China China National Offshore Oil Co. Ltd.(CNOOC)Tianjin Branch CompanyTianjin 300459China cnooc Research Institute Beijing 100028China

The organic matter(OM)enrichment mechanisms and depositional environment characteristics of lacustrine source rocks in the western Bozhong Sag,Bohai Bay Basin in Northeast China remain *** address these issues,based on Rock-Eval pyrolysis,kerogen macerals,H/C and O/C ratios,GC-MS,major and trace elements,the Dongying Formation Member(Mbr)3(E_(3)d_(3)),the Shahejie Formation mbrs 1 and 2(E_(2)s_(1+2)),and the Shahejie Mbr 3(E_(2)s_(3))source rocks in the western Bozhong Sag were *** above methods were used to reveal their geochemical properties,OM origins and depositional environments,all of which indicate that E_(2)s_(1+2)and E_(2)s_(3)are excellent source rocks,and that E_(3)d_(3)is of the second good quality.E_(3)d_(3)source rocks were formed under a warm and humid climate,mainly belong to fluvial/delta facies,the E_(3)d_(3)sediments formed under weakly oxidizing and freshwater ***,the depositional environments of E_(2)s_(1+2)source rocks were arid and cold climate,representing saline or freshwater lacustrine facies,and the sediments of E_(2)s_(1+2)belong to anoxic or suboxic settings with large evaporation and *** the period of E_(2)s_(3),the climate became warm and humid,indicating the freshwater lacustrine facies,and E_(2)s_(3)was characterized by freshwater and abundant ***,compared with other intervals,the OM origin of E_(3)d_(3)source rocks has noticeable terrestrial *** OM origin of the E_(2)s_(1+2)and E_(2)s_(3)are mainly plankton and *** subsidence and climate change have affected the changes of the depositional environment in the western Bozhong Sag,thus controlling the distribution of the source rocks,the geochemical characteristics in the three intervals of lacustrine source rocks have distinct ***,these factors are effective to evaluate the paleoenvironmental characteristics of source rocks by biomarkers,major and trace *** established models

关键词： petroleum geology source rocks depositional environments biomarkers major elements trace elements Bozhong Sag

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：