检索结果-南通市图书馆

Chinese Journal of Chemical engineering 2024年第4期68卷 83-93页

作者： Zhihao Yang Li Chen Jian Xue Miaomiao Su Fangdan Zhang Liangxin Ding Suqing Wang Haihui Wang guangdong provincial key Lab of Green Chemical Product Technology School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China Beijing key laboratory of Membrane materials and engineering Department of Chemical EngineeringTsinghua UniversityBeijing 100084China

Separators play a critical role in the safety and performance of lithium-ion ***,commercial polyolefin separators are limited by their poor affinity with electrolytes and low melting *** this work,we constructed a reinforced-concrete-like structure by homogeneously dispersing nano-Al_(2)O_(3) and cellulose on the separators to improve their stability and *** this reinforcedconcrete-like structure,the cellulose is a reinforcing mesh,and the nano-Al_(2)O_(3) acts as concrete to support the *** constructing the reinforced-concrete-like structure,the separators exhibit good stability even at 200℃(thermal shrinkage of 0.3%),enhanced tensile strain(tensile stress of 133.4 MPa and tensile strains of 62%),and better electrolyte wettability(a contact angle of 6.5°).Combining these advantages,the cells with nano-Al_(2)O_(3)@cellulose-coated separators exhibit stable cycling performance and good rate ***,the construction of the reinforced-concretelike structure is a promising technology to promote the application of lithium-ion batteries in extreme environments.

关键词： Alumina Nanomaterials Lithium-ion batteries Membranes Cellulose Reinforced-concrete-like structure

Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO_(2)

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第4期31卷 786-794页

作者： Xu Zhao Naitao Gao Shengcheng Wu Shaozhen Li Sujuan Wu School of Electrical and Electronic engineering Wuhan Polytechnic UniversityWuhan 430023China Institute for Advanced materials and guangdong provincial key laboratory of Quantum engineering and Quantum materials South China Academy of Advanced OptoelectronicsSouth China Normal UniversityGuangzhou 510006China

CsPbX_(3)-based(X=I,Br,Cl)inorganic perovskite solar cells(PSCs)prepared by low-temperature process have attracted much attention because of their low cost and excellent thermal ***,the high trap state density and serious charge recombination between low-temperature processed TiO_(2)film and inorganic perovskite layer interface seriously restrict the performance of all-inorganic *** a thin polyethylene oxide(PEO)layer is employed to modify TiO_(2)film to passivate traps and promote carrier *** impacts of PEO layer on microstructure and photoelectric characteristics of TiO_(2)film and related devices are systematically *** results suggest that PEO modification can reduce the surface roughness of TiO_(2)film,decrease its average surface potential,and passivate trap *** optimal conditions,the champion efficiency of CsPbI_(2)Br PSCs with PEO-modified TiO_(2)(PEO-PSCs)has been improved to 11.24%from 9.03%of reference ***,the hysteresis behavior and charge recombination have been suppressed in PEO-PSCs.

关键词： polyethylene oxide-modified TiO_(2) film low-temperature process CsPbI_(2)Br-based all-inorganic perovskite solar cells photo-voltaic performance

Leakage Proof,Flame-Retardant,and Electromagnetic Shield Wood Morphology Genetic Composite Phase Change materials for Solar thermal Energy Harvesting

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第10期16卷 99-120页

作者： Yuhui Chen Yang Meng Jiangyu Zhang Yuhui Xie Hua Guo Mukun He Xuetao Shi Yi Mei Xinxin Sheng Delong Xie Yunnan provincial key laboratory of Energy Saving in Phosphorus Chemical engineering and New Phosphorus materials The International Joint Laboratory for Sustainable Polymers of Yunnan ProvinceThe Higher Educational Key Laboratory for Phosphorus Chemical Engineering of Yunnan ProvinceFaculty of Chemical EngineeringKunming University of Science and TechnologyKunming 650500People's Republic of China guangdong provincial key laboratory of Functional Soft Condensed Matter School of Materials and EnergyGuangdong University of TechnologyGuangzhou 510006People's Republic of China Shaanxi key laboratory of Macromolecular Science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi'anShaanxi 710072People's Republic of China

Phase change materials(PCMs)offer a promising solution to address the challenges posed by intermittency and fluctuations in solar thermal ***,for organic solid-liquid PCMs,issues such as leakage,low thermal conductivity,lack of efficient solar-thermal media,and flamma-bility have constrained their broad ***,we present an innova-tive class of versatile composite phase change materials(CPCMs)developed through a facile and environmentally friendly synthesis approach,leveraging the inherent anisotropy and unidirectional porosity of wood aerogel(nanowood)to support polyethylene glycol(PEG).The wood modification process involves the incorporation of phytic acid(PA)and MXene hybrid structure through an evaporation-induced assembly method,which could impart non-leaking PEG filling while concurrently facilitating thermal conduction,light absorption,and ***,the as-prepared wood-based CPCMs showcase enhanced thermal conductivity(0.82 W m^(-1)K^(-1),about 4.6 times than PEG)as well as high latent heat of 135.5 kJ kg^(-1)(91.5%encapsula-tion)with thermal durability and stability throughout at least 200 heating and cooling cycles,featuring dramatic solar-thermal conversion efficiency up to 98.58%.In addition,with the synergistic effect of phytic acid and MXene,the flame-retardant performance of the CPCMs has been significantly enhanced,showing a self-extinguishing ***,the excellent electromagnetic shielding of 44.45 dB was endowed to the CPCMs,relieving contemporary health hazards associated with electromagnetic ***,we capitalize on the exquisite wood cell structure with unidirectional transport inherent in the development of multifunctional CPCMs,showcasing the operational principle through a proof-of-concept prototype system.

关键词： Wood PCMs MXene Solar thermal storage and conversion Flame-retardant Electromagnetic shielding

Controllable shaping of high-index dielectric nanoparticles by exploiting the giant optical force of femtosecond laser pulses

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photonics Research 2024年第2期12卷 282-291页

作者： YUHENG MAO SHUWEN BAI MINGCHENG PANMAI LIDAN ZHOU SHIMEI LIU SHULEI LI HAIYING LIU HAIHUA FAN JUN DAI SHENG LAN guangdong provincial key laboratory of Nanophotonic Functional materials and Devices School of Information and Optoelectronic Science and EngineeringSouth China Normal UniversityGuangzhou 510006China Shenzhen Institute of Terahertz Technology and Innovation Shenzhen 518102China State key laboratory of Optoelectronic materials and Technologies School of Electronics and Information TechnologySun Yat-sen UniversityGuangzhou 510006China School of Optoelectronic engineering Guangdong Polytechnic Normal UniversityGuangzhou 510665China

Nanoparticles made of different materials usually support optical resonances in the visible to near infrared spectral range,such as the localized surface plasmons observed in metallic nanoparticles and the Mie resonances observed in dielectric *** optical resonances,which are important for practical applications,depend strongly on the morphologies of *** irradiation is a simple but effective way to modify such optical resonances through the change in the morphology of a *** laser-induced shaping of metallic nanoparticles has been successfully demonstrated,it remains a big challenge for dielectric nanoparticles due to their larger Young’s modulus and smaller thermal ***,we proposed and demonstrated a strategy for realizing controllable shaping of high-index dielectric nanoparticles by exploiting the giant optical force induced by femtosecond laser *** was found that both Si and Ge nanoparticles can be lit up by resonantly exciting the optical resonances with femtosecond laser pulses,leading to the luminescence burst when the laser power exceeds a *** addition,the morphologies of Si and Ge nanoparticles can be modified by utilizing the giant absorption force exerted on them and the reduced Young’s modulus at high *** shape transformation from sphere to ellipsoid can be realized by laser irradiation,leading to the blueshifts of the optical *** was found that Si and Ge nanoparticles were generally elongated along the direction parallel to the polarization of the laser *** shaping of Si and Ge can be achieved by deliberately adjusting the excitation wavelength and the laser *** findings are helpful for understanding the giant absorption force of femtosecond laser light and are useful for designing nanoscale photonic devices based on shaped highindex nanoparticles.

关键词： optical polarization dielectric

High-precision nondestructive evaluation of a thermal barrier coating based on perovskite quantum dot anion exchange

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4582-4592页

作者： Tao Han Shufang Ding Zifan Wang Sirong Jiang Pengjiang Jing Tianshang Yi Yaqi Chen Chunzhi Jiang Xiaofeng Zhang Microelectronics and Optoelectronics Technology key laboratory of Hunan Higher Education School of Physics and Electronic Electrical EngineeringXiangnan UniversityChenzhou 423000China National engineering laboratory for Modern materials Surface engineering Technology&The key Lab of guangdong for Modern Surface engineering Technology Guangdong Institute of New MaterialsGuangdong Academy of SciencesGuangzhou 510650China

thermal barrier coatings(TBCs)in gas turbine engines are used in expressly harsh environments;thus,assessing TBC integrity status is critical for safety and ***,traditional periodic maintenance involves visual inspections of the TBCs,requiring the gas turbine to be decommissioned and partially *** importantly,tiny defects or internal damages that easily cause coating failure cannot be *** this work,a new nondestructive evaluation(NDE)technique of TBCs based on quantum dot(QD)anion exchange is first explored *** exchanging anions between the Cl ions and the CsPbBr_(3) QDs,the degrees of salt corrosion of the TBCs are *** resultant NDE technique shows that the colour of the TBCs obviously changes from green to blue,accompanied by a large blueshift(~100 nm)of the photoluminescence(PL)peak *** addition,the relationship between the PL peak position and coating thermophysical properties indicates that the precision of this NDE technique may easily identify theμm-level of the thermal growth oxide(TGO)changes inside the TBCs.

关键词： thermal barrier coatings nondestructive evaluation CsPbBr_(3)quantum dot anion exchange thermal growth oxide

thermally Conductive,Healable Glass Fiber Cloth Reinforced Polymer Composite based onβ-Hydroxyester Bonds Crosslinked Epoxy with Improved Heat Resistance

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第5期42卷 643-654,I0009页

作者： Fang Chen Xiao-Yan Pang Ze-Ping Zhang Min-Zhi Rong Ming-Qiu Zhang key laboratory for Polymeric Composite and Functional materials of Ministry of Education GD HPPC LabIGCMESchool of ChemistrySun Yat-sen UniversityGuangzhou510275China guangdong provincial laboratory of Chemistry and Fine Chemical engineering Jieyang Center Jieyang515200China

To simultaneously endow thermal conductivity,high glass transition temperature(Tg)and healing capability to glass fiber/epoxy(GFREP)composite,dynamic crosslinked epoxy resin bearing reversibleβ-hydroxyl ester bonds was reinforced with boron nitride nanosheets modified glass fiber cloth(GFC@BNNSs).The in-plane heat conduction paths were constructed by electrostatic self-assembly of polyacrylic acid treated GFC and polyethyleneimine decorated ***,the GFC@BNNSs were impregnated with the mixture of lower concentration(3-glycidyloxypropyl)trimethoxysilane grafted BN micron sheets,3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate and hexahydro-4-methylphthalic anhydride,which accounted for establishing the through-plane heat transport pathways and avoiding serious deterioration of mechanical *** resultant GFREP composite containing less boron nitride particles(17.6 wt%)exhibited superior in-plane(3.29 W·m^(-1)·K^(-1))and through-plane(1.16 W·m^(-1)·K^(-1))thermal conductivities,as well as high Tg of 204℃(Tg of the unfilled epoxy=177℃).The reversible transesterification reaction enabled closure of interlaminar cracks within the composite,achieving decent healing efficiencies estimated by means of tensile strength(71.2%),electrical breakdown strength(83.6%)and thermal conductivity(69.1%).The present work overcame the disadvantages of conventional thermally conductive composites,and provided an efficient approach to prolong the life span of thermally conductive GFREP laminate for high-temperature resistant integrated circuit application.

关键词： thermally conductive composites Boron nitride High-temperature resistance β-Hydroxyl ester bond Healing

Single-atom Ag-loaded carbon nitride photocatalysts for efficient degradation of acetaminophen:The role of Ag-atom and O_(2)

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第5期139卷 12-22页

作者： Yi Yuan Wen-Long Wang Zhi-Wei Wang Jin Wang Qian-Yuan Wu key laboratory of Microorganism Application and Risk Control of Shenzhen Guangdong Provincial Engineering Research Center for Urban Water Recycling and Environmental SafetyInstitute of Environment and EcologyShenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China Shenzhen Environmental Science and New Energy Technology engineering laboratory Tsinghua-Berkeley Shenzhen InstituteShenzhen 518055China College of materials Science and engineering Shenzhen UniversityShenzhen 518071China

Carbon nitride has been extensively used as a visible-light photocatalyst,but it has the disadvantages of a low specific surface area,rapid electron-hole recombination,and relatively low light *** this study,single-atom Ag was successfully anchored on ultrathin carbon nitride(UTCN)via thermal polymerization,the catalyst obtained is called *** Ag hardly changed the carbon nitride's layered and porous physical *** exhibited efficient visible-light photocatalytic performances in the degradation of various recalcitrant pollutants,eliminations of 85% were achieved by visible-light irradiation for *** with Ag improved the photocatalytic performance of UTCN by narrowing the forbidden band gap from 2.49 to 2.36 e V and suppressing electron-hole pair *** addition,Ag doping facilitated O_(2) adsorption on UTCN by decreasing the adsorption energy from -0.2 to -2.22 e V and favored the formation of O_(2)^(·-).Electron spin resonance and radical-quenching experiments showed that O_(2)^(·-)was the major reactive species in the degradation of Acetaminophen(paracetamol,APAP).

关键词： Ag single atom Carbon nitride Photocatalysis Visible light Adsorption energy Reactive species

Thiol-Disulfide Exchange Coordinates the Release of Nitric Oxide and Dexamethasone for Synergistic Regulation of Intestinal Microenvironment in Colitis

在线全文

学校读者我要写书评

暂无评论

Research 2024年第2期6卷 285-300页

作者： Junna Lu Tongfei Shi Chengxin Shi Fangman Chen Chao Yang Xiaochun Xie Zheng Wang He Shen Jiaqi Xu Kam W.Leong Dan Shao School of Biomedical Sciences and engineering South China University of TechnologyGuangzhou International CampusGuangzhouGuangdong 510006China National engineering Research Center for Tissue Restoration and Reconstruction South China University of TechnologyGuangdong 510006China Department of Plastic and Aesthetic Center The First Affliated Hospital of Zhejiang UniversityHangzhou 310000China Department of Biomedical engineering Columbia UniversityNew YorkNY 10027USA School of Medicine South China University of TechnologyGuangzhouGuangdong 510006China CAS key laboratory of Nano-Bio Interface Suzhou Institute of Nano-Tech and NanoBionicsChinese Academy of SciencesSuzhou 215123China CAS key laboratory for Biomedical Efects of Nanomaterials&Nanosafety CAS Center for Excellence in NanoscienceNational Center for Nanoscience and TechnologyBeijing 100190China guangdong provincial key laboratory of Biomedical engineering South China University of TechnologyGuangzhou 510006China key laboratory of Biomedical materials and engineering of the Ministry of Education South China University of TechnologyGuangzhou 510006China

The cell-specific functions of nitric oxide(NO)in the intestinal microenvironment orchestrate its therapeutic effects in ulcerative *** most biomaterials show promise by eliciting the characteristics of NO,the insufficient storage,burst release,and pro-inflammatory side effects of NO remain as ***,we report the development of thiol-disulfide hybrid mesoporous organosilica nanoparticles(MONs)that improve the storage and sustained release of NO,broadening the therapeutic window of NO-based therapy against *** tailored NO-storing nanomaterials coordinated the release of NO and the immunoregulator dexamethasone(Dex)in the intestinal microenvironment,specifically integrating the alleviation of oxidative stress in enterocytes and the reversal of NO-exacerbated macrophage ***,such a synchronous operation was achieved by a self-motivated process wherein the thiyl radicals produced by NO release cleaved the disulfide bonds to degrade the matrix and release Dex via thiol-disulfide ***,the MON-mediated combination of NO and Dex greatly ameliorated intractable colitis compared with 5-aminosalicylic acid,even after delayed ***,our results reveal a key contribution of synergistic modulation of the intestinal microenvironment in NO-based colitis therapy and introduce thiol-disulfide hybrid nanotherapeutics for the management of inflammatory diseases and cancer.

关键词： sustained release disulfide

Purification of copper foils driven by single crystallization

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第2期33卷 506-511页

作者：寇金宗赵孟泽李兴光何梦林杨方友刘科海成庆秋任云龙刘灿付莹吴慕鸿刘开辉王恩哥 Songshan Lake materials laboratory Dongguan 523808China Beijing National laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of SciencesBeijing 100190China guangdong provincial key laboratory of Quantum engineering and Quantum materials School of PhysicsSouth China Normal UniversityGuangzhou 510006China guangdong–Hong Kong Joint laboratory of Quantum Matter Frontier Research Institute for PhysicsSouth China Normal UniversityGuangzhou 510006China State key laboratory for Mesoscopic Physics Frontiers Science Center for Nano-optoelectronicsSchool of PhysicsPeking UniversityBeijing 100871China key laboratory of Quantum State Construction and Manipulation(Ministry of Education) Department of PhysicsRenmin University of ChinaBeijing 100872China International Center for Quantum materials Collaborative Innovation Center of Quantum MatterPeking UniversityBeijing 100871China School of Physics Liaoning UniversityShenyang 110036China

High-purity copper(Cu) with excellent thermal and electrical conductivity, is crucial in modern technological applications, including heat exchangers, integrated circuits, and superconducting magnets. The current purification process is mainly based on the zone/electrolytic refining or anion exchange, however, which excessively relies on specific integrated equipment with ultra-high vacuum or chemical solution environment, and is also bothered by external contaminants and energy consumption. Here we report a simple approach to purify the Cu foils from 99.9%(3N) to 99.99%(4N) by a temperature-gradient thermal annealing technique, accompanied by the kinetic evolution of single crystallization of *** success of purification mainly relies on(i) the segregation of elements with low effective distribution coefficient driven by grain-boundary movements and(ii) the high-temperature evaporation of elements with high saturated vapor *** purified Cu foils display higher flexibility(elongation of 70%) and electrical conductivity(104% IACS) than that of the original commercial rolled Cu foils(elongation of 10%, electrical conductivity of ~ 100% IACS). Our results provide an effective strategy to optimize the as-produced metal medium, and therefore will facilitate the potential applications of Cu foils in precision electronic products and high-frequency printed circuit boards.

关键词： purification copper foil thermal annealing technique single crystallization

Solar-driven photothermal catalytic CO2 conversion:a review

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 2913-2939页

作者： Bachirou Guene Lougou Bo-Xi Geng Ru-Ming Pan Wei Wang Tian-Tian Yan Fang-Hua Li Hao Zhang Oraléou Sangué Djandja Yong Shuai Meisam Tabatabaei Daniel Sabi Takou School of Energy Science and engineering Harbin Institute of Technology MIIT key laboratory of Critical materials Technology for New Energy Conversion and Storage Harbin Institute of Technology State key laboratory of Urban Water Resource and Environment Harbin Institute of Technology School of Electrical engineering and Automation Harbin Institute of Technology guangdong provincial key laboratory of Distributed Energy Systems Engineering Research Center of None-Food Biomass Efficient Pyrolysis and Utilization Technology of Guangdong Higher Education InstitutesDongguan University of Technology Higher Institution Centre of Excellence (HICoE) Institute of Tropical Aquaculture and Fisheries (AKUATROP)Universiti Malaysia Terengganu Department of Biomaterials Saveetha Dental CollegeSaveetha Institute of Medical and Technical Sciences école Polytechnique d'Abomey-Calavi University of Abomey-Calavi

It is highly desirable to seek green and sustainable technologies,such as employing photo thermal effects to drive energy catalysis processes to address the high energy demand and associated environmental impacts induced by the current *** photothermocatalysis process is an emerging research area with great potential in efficiently converting solar energy through various catalytic ***,achieving simultaneously high conversion efficiency,cyclability,and durability is still a daunting ***,tremendous work is still needed to enhance solar photo thermal catalytic conversion and promote its large-scale *** review developed the principles of coupling solar photon and thermal fields underlying the photothermal effect,exploration of efficient nanocatalysts,development of optofluidic reactor model,and photo thermal synergistic-driven CO2reduction *** ultimate goal was to provide an effective approach that can effectively convert solar energy into photocarriers/hot-electrons and heat,and importantly,can couple them to regulate catalysis reaction pathways toward the production of value-added fuel and chemical energy.

关键词： Photochemistry Photothermal CO 2 catalytic conversion Nanomaterial Solar fuels and chemicals