检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第7期31卷 1763-1777页

作者： Chen-yang Jiang Xiao-qiang Li Jin-tao Wang Hao Luo Sheng-qing Gao Sheng-guan Qu Chao Yang National Engineering Research Centre of Near-Net-Shape Forming for Metallic Materials South China University of TechnologyGuangzhou 510640GuangdongChina Institute of New Materials Guangdong Academy of ScienceGuangzhou 510650GuangdongChina

To address the inhomogeneous microstructure and improve the mechanical properties of DT300 ultra-high strength steel specimens fabricated by laser powder bed fusion,different post-heat treatment schedules are *** the increase in austenitizing temperature and time,the migration rate of austenite grain boundaries continuously increases with the dissolution of nano-carbides,and the formation of nano-oxides and twin martensite is also inhibited *** rapid growth in the size of prior austenite grains and martensite laths,as well as the decrease in the content of nano-oxides and twin martensite,led to a rapid decrease in the strength(yield strength and ultimate tensile strength)from HT2 to HTF *** HT1 specimens(austenitizing at 830℃for 30 min,then oil quenching and tempering at 300℃for 120 min and finally air cooling)display excellent mechanical properties of yield strength of 1572 MPa,ultimate tensile strength of 1847 MPa,elongation of 9.84%,and fracture toughness of 106 MPa m^(1/2),which are counterparts to those of conventional DT300 steel forgings after heat treatment.

关键词： DT300 ultra-high strength steel Laser powder bed fusion-Short-time low-temperature austenitizing Microstructure Mechanical property

The UDP-glycosyltransferase OsUGT706D2 positively regulates cold and submergence stress tolerance in rice

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Crop Journal 2024年第3期12卷 732-742页

作者： Qing Liu Lanlan Zhang Shuwei Lyu Hang Yu Wenjie Huang Liqun Jiang Jing Zhang Bingrui Sun Xingxue Mao Pingli Chen Junlian Xing Wenfeng Chen Zhilan Fan Shijuan Yan Chen Li guangdong Key Laboratory of New Technology in Rice Breeding/guangdong Rice Engineering Laboratory/Key Laboratory of Genetics and Breeding of High Quality Rice in Southern China(Co-construction by Ministry and Province) Ministry of Agriculture and Rural AffairsRice Research InstituteGuangdong Academy of Agricultural SciencesGuangzhou 510640GuangdongChina guangdong Key Laboratory for Crop Germplasm Resources Preservation and Utilization Agro-biological Gene Research CenterGuangdong Academy of Agricultural SciencesGuangzhou 510640GuangdongChina

In a genome-wide association study,we identified a rice UDP-glycosyltransferase gene,OsUGT706D2,whose transcription was activated in response to cold and submergence stress and to exogenous abscisic acid(ABA).OsUGT706D2 positively regulated the biosynthesis of tricin-4’-O-(syringyl alcohol)ether-7-O-glucoside at both the transcriptional and metabolic ***706D2 mediated cold and submergence tolerance by modulating the expression of stress-responsive genes as well as the abscisic acid(ABA)signaling *** of function of OsUGT706D2 increased cold and submergence tolerance and loss of function of OsUGT706D2 reduced cold *** positively regulated OsUGT706D2-mediated cold tolerance but reduced submergence *** findings suggest the potential use of OsUGT706D2 for improving abiotic stress tolerance in rice.

关键词： UDP-glycosyltransferase Rice Cold tolerance Submergence tolerance ABA

Machine learning-based performance predictions for steels considering manufacturing process parameters:a review

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1555-1581页

作者： Wei Fang Jia-xin Huang Tie-xu Peng Yang Long Fu-xing Yin Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology School of Materials Science and EngineeringHebei University of TechnologyTianjin 300132China Institute of New Materials Guangdong Academy of ScienceGuangzhou 510651GuangdongChina

Steels are widely used as structural materials,making them essential for supporting our lives and ***,further improving the comprehensive properties of steel through traditional trial-and-error methods becomes challenging due to the continuous development and numerous processing parameters involved in steel *** address this challenge,the application of machine learning methods becomes crucial in establishing complex relationships between manufacturing processes and steel *** review begins with a general overview of machine learning methods and subsequently introduces various performance predictions in steel *** classification of performance pre-diction was used to assess the current application of machine learning model-assisted *** important issues,such as data source and characteristics,intermediate features,algorithm optimization,key feature analysis,and the role of environmental factors,were summarized and *** insights will be beneficial and enlightening to future research endeavors in this field.

关键词： Steel Manufacturing process Machine learning Performance prediction Algorithm

Influence of crystal-transforming agent on the performance and mechanism ofα-high-strength gypsum prepared from FGD gypsum

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第4期87卷 37-45页

作者： Zhuoyue Xu Xiao Wang Biao Jin Dawang Zhang Hui Li College of Materials science and Engineering Xi'an University of Architecture and TechnologyXi'an710055China Schoolof Materials and Chemical Engineering Henan University of Urban ConstructionPingdingshan46736China

This paper investigates the impact of flue gas desulfurization(FGD)gypsum's crystal modifier on the characteristics and microcosmic mechanism ofα-high strength *** results demonstrate that all three crystal modifiers can convert FGD gypsum toα-high-strength *** acid(CA)has the most significant influence onα-high-strength gypsum,and the preparedα-high-strength gypsum is short columnar,with an aspect ratio in the range of 1-3,and has a faster setting time,a larger specific surface area,and a smaller standard consistency,higher compressive strength,greater surface hardness,and smaller crystal particle *** initial setting time of theα-high-strength gypsum manufactured with CA crystal modifier was decreased by 36%compared to the blank sample,the final setting time was lowered by 37.5%,and the water consumption of the standard consistency was reduced by 8%.The maximum strength is 32 MPa after 2 h,the absolute dry compressive strength is up to 38 MPa,and the surface hardness is improved by 24.43%.

关键词： Flue gas desulfurization gypsum Crystal modifier Microscopic mechanism α-high-strength gypsum

Investigation of Maxima Assumptions in Modelling Tropical Cyclone- Induced Hazards in the South China Sea

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 491-504页

作者： WEN Ze-guo WANG Fu-ming WAN Jing YANG Fan School of Civil Engineering Sun Yat-sen University&Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Zhuhai 519082China guangdong academy of Safety science and Technology Guangzhou 510060China guangdong Key Laboratory of Oceanic Civil Engineering Guangzhou 510275China Advanced Energy science and Technology guangdong Laboratory(Yangjiang Offshore Wind Energy Laboratory) Yangjiang 529500China

The present study aims to examine the suitability of two commonly used assumptions that simplify modelling metoceanconditions for designing offshore wind turbines in the South China Sea (SCS). The first assumption assumes thatjoint N-year extreme wind and wave events can be independently estimated and subsequently combined. The secondone assumes peak wind and waves can be modelled as occurring simultaneously during a tropical cyclone (TC) *** better understand the potential TC activity, a set of 10000 years synthetic TC events are generated. The wind fieldmodel and the Mike 21 spectral wave model are employed to model the TC-induced hazards. Subsequently, theeffect of the assumptions is evaluated by analyzing the peak structural response of both monopile and semisubmersibleoffshore wind turbines during TC events. The results demonstrate that the examined assumptions are generally *** assessing the implications of these assumptions, valuable insights are obtained, which can inform andimprove the modelling of TC-induced hazards in the SCS region.

关键词： tropical cyclone numerical wave modelling hazards offshore wind turbines structural response

Microstructure and Mechanical Behavior of Mg-Based Bimetal Plates with High Formability Sleeve by Co-extrusion

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 499-512页

作者： Yue-Hui Dang Sheng-Lin Liu Xiao-Lei Ai Xiao-Wei Feng Bo Feng Zhuo Tian Ying-Fei Lin Huan-Tao Chen Kai-Hong Zheng School of Materials science and Engineering Chang’an UniversityShaanxi 710064China guangdong Key Laboratory of Metal Toughening Technology and Application Institute of New MaterialsGuangdong Academy of SciencesGuangzhou 510650China

In this study,microstructure and mechanical behavior of two types of Mg-based bimetal plates with a high formability sleeve were systematically studied,with a great emphasis on the effect of the interface characteristic and the sleeve fraction on the plasticity of composite *** rule of mixtures(ROM)for elongation was also *** results show that when there is no or thin diffusion layer with thickness of about 3μm,Mg-based bimetal plates have a good plasticity with elongation of about 19-24%,and the ROM predicted elongations are very close to the experimental *** contrast,with a diffusion layer about 95-155μm thick,Mg-based bimetal plates exhibit a poor plasticity with elongation of about 11-17%,and the experimental elongations largely deviate from the ROM *** plasticity of Mg-based bimetal plates increases with increasing sleeve *** study provides new insights on the plastic deformation of Mg-based bimetal composites with a high formability sleeve.

关键词： Mg-based composites Co-extrusion Microstructure Mechanical behavior Plastic deformation

Genes controlling grain chalkiness in rice

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Crop Journal 2024年第4期12卷 979-991页

作者： Luo Chen Xiumei Li Minhua Zheng Rui Hu Jingfang Dong Lingyan Zhou Wuge Liu Dilin Liu Wu Yang Rice Research Institute Guangdong Academy of Agricultural SciencesGuangdong Key Laboratory of New Technology in Rice BreedingGuangdong Rice Engineering LaboratoryKey Laboratory of Genetics and Breeding of High Quality Rice in Southern China(Co-construction by Ministry and Province)Ministry of Agriculture and Rural AffairsGuangzhou 510640GuangdongChina College of Agriculture and Biology Zhongkai University of Agriculture and EngineeringGuangzhou 510225GuangdongChina guangdong Provincial Key Laboratory for Crop Germplasm Resources Preservation and Utilization Agro-biological Gene Research CenterGuangdong Academy of Agricultural SciencesGuangzhou 510640GuangdongChina

With rising living standards,there is an increasing demand for high-quality *** quality is mainly defined by milling quality,appearance quality,cooking and eating quality,and nutrition *** them,chalkiness is a key trait for appearance quality,which adversely affects cooking and eating quality,head rice yield,and commercial ***,chalkiness is undesirable,and reducing chalkiness is a major goal in rice quality ***,chalkiness is a complex trait jointly influenced by genetic and environmental factors,making its genetic study and precision improvement a huge *** the rapid development of molecular techniques,much knowledge has been gained about the genes and molecular networks involved in chalkiness *** present review describes the major environmental factors affecting chalkiness and summarizes the quantitative trait loci(QTL)associated with *** than 150 genes related to chalkiness formation have been *** functions of the genes regulating chalkiness,primarily those involved in starch synthesis,storage protein synthesis,transcription regulation,organelle development,grain shape regulation,and hightemperature response,are ***,we identify the challenges associated with genetic improvement of chalkiness and suggest potential ***,the review offers insight into the molecular dynamics of chalkiness and provides a strong basis for the future breeding of high-quality rice varieties.

关键词： Rice Grain quality Chalkiness QTL identification Gene

Damage constitutive model of lunar soil simulant geopolymer under impact loading

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第3期16卷 1059-1071页

作者： Hanyan Wang Qinyong Ma Qianyun Wu School of Civil Engineering and architecture Anhui University of Science and TechnologyHuainan232001China Engineering Research Center of Underground Mine construction Ministry of EducationAnhui University of Science and TechnologyHuainan232001China

Lunar base construction is a crucial component of the lunar exploration program,and considering the dynamic characteristics of lunar soil is important for moon ***,investigating the dynamic properties of lunar soil by establishing a constitutive relationship is critical for providing a theoretical basis for its damage *** this paper,a split Hopkinson pressure bar(SHPB)device was used to perform three sets of impact tests under different pressures on a lunar soil simulant geopolymer(LSSG)with sodium silicate(Na_(2)SiO_(3))contents of 1%,3%,5%and 7%.The dynamic stressestrain curves,failure modes,and energy variation rules of LSSG under different pressures were *** equation was modified based on the ZWT viscoelastic constitutive model and was combined with the damage *** damage element obeys the Weibull distribution and the constitutive equation that can describe the mechanical properties of LSSG under dynamic loading was *** results demonstrate that the dynamic compressive strength of LSSG has a marked strain-rate strengthening ***_(2)SiO_(3) has both strengthening and deterioration effects on the dynamic compressive strength of *** Na_(2)SiO_(3) grows,the dynamic compressive strength of LSSG first increases and then *** a fixed air pressure,5%Na_(2)SiO_(3) had the largest dynamic compressive strength,the largest incident energy,the smallest absorbed energy,and the lightest *** ZWT equation was modified according to the stress response properties of LSSG and the range of the SHPB strain rate to obtain the constitutive equation of the LSSG,and the model’s correctness was confirmed.

关键词： Lunar soil simulant geopolymer(LSSG) Split hopkinson pressure bar(SHPB)test Constitutive model Energy analysis Failure mode

Topographic seismic effects and avalanche hazard:A case study of Mount Siella(L’Aquila,Central Italy)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mountain science 2024年第2期21卷 662-675页

作者： Ferdinando TOTANI Department of Civil construction-architecture and Environmental Engineering University of L’AquilaL'Aquila 67100Italy

In mountainous areas,snow avalanches could be triggered by the shaking produced by *** forces induced by the earthquake can cause an irregular increase of shear strength load down the slope,for the presence of complex surface and buried *** irregularities generate maximum effects of waves amplification linked to wavelengths comparable to the horizontal dimension of the topographic *** this reason,the selected time-histories represent an appropriate input for the two-dimensional numerical response analyses when a dynamic phenomenon produce the resonant motion of a whole *** represents an important earthquake-induced hazard in snow-covered mountain areas with high probability of seismic *** valleys are located in regions with scare ground motion data and investments on infrastructures are not always accompanied by adequate protection against earthquake-induced *** paper points out a simple deterministic approach for selecting a set of real accelerograms applied to a real case of Siella Mountain(Central Italy)where a large avalanche destroying a tourist facility of Rigopiano resort on 18 January *** selected time histories were used as input for the two-dimensional numerical model of the subsoil to evaluate the topographic seismic amplification in ridge and compare it with the results of other *** methods suggest that morphology-related inertial effects should be considered as an overload action on snow layers when controlling multi-hazard studies and spatial planning.

关键词： Real accelerograms selection Deterministic approach Topographic amplification Avalanche induced by earthquake 2D seismic response.

Flexible planar micro supercapacitor diode

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 429-435,I0011页

作者： Yihui Ma Pei Tang Zhenyuan Miao Wuyang Tan Qijun Wang Yuecong Chen Guosheng Li Qingyun Dou Xingbin Yan Lingling Shui guangdong Basic Research Center of Excellence for Structure and Fundamental Interactions of Matter Guangdong Provincial Key Laboratory of Nanophotonic Functional Materials and DevicesSchool of Information and Optoelectronic Science and Engineering&South China Academy of Advanced OptoelectronicsGuangzhou 510006GuangdongChina Department of Materials science and Engineering Sun Yat-Sen UniversityGuangzhou 510275GuangdongChina College of Materials science and Engineering Guilin University of TechnologyGuilin 541004GuangxiChina

Supercapacitor diode is a novel ion device that performs both supercapacitor energy storage and ion diode rectification ***,previously reported devices are limited by their large size and complex *** this work,we demonstrate a screen-printed micro supercapacitor diode(MCAPode)that based on the insertion of a finger mode with spinel ZnCo_(2)O_(4) as cathode and activated carbon as anode for the first time,and featuring an excellent area specific capacitance(1.21 mF cm^(-2)at 10 mV s^(-1))and high rectification characteristics(rectification ratioⅠof 11.99 at 40 mV s^(-1)).Taking advantage of the ionic gel electrolyte,which provides excellent stability during repeated flexing and at high *** addition,MCAPode exhibits excellent electrochemical performance and rectification capability in"AND"and"OR"logic *** findings provide practical solutions for future expansion of micro supercapacitor diode applications.

关键词： Micro devices Supercapacitor diodes Screen-printing Rectification Logic gates