检索结果-南通市图书馆

A modified smoothed particle hydrodynamics method considering residual stress for simulating failure and its application in layered rock mass

引用

Journal of Mountain Science 2024年第6期21卷 2091-2112页

作者： XIA Chengzhi SHI Zhenming KOU Huanjia Department of geotechnical engineering College of Civil EngineeringTongji UniversityShanghai 200092China Key Laboratory of geotechnical and Underground engineering of Ministry of Education Tongji UniversityShanghai 200092China

Residual strength is an indispensable factor in evaluating rock fracture,yet the current Smoothed Particle Hydrodynamics(SPH)framework rarely considers its influence when simulating fracture.An improved cracking strategy considering residual stress in the base bond SPH method was proposed to simulate failures in layered rocks and slopes and verified by experimental results and other simulation methods(i.e.,the discrete element method).Modified Mohr–Coulomb failure criterion was applied to distinguish the mixed failure of tensile and shear.Bond fracture markψwas introduced to improve the kernel function after tensile damage,and the calculation of residual stress after the damage was derived after shear damage.Numerical simulations were carried out to evaluate its performance under different stress and scale conditions and to verify its effectiveness in realistically reproducing crack initiation and propagation and coalescence,even fracture and separation.The results indicate that the improved cracking strategy precisely captures the fracture and failure pattern in layered rocks and rock slopes.The residual stress of brittle tock is correctly captured by the improved SPH method.The improved SPH method that considers residual strength shows an approximately 13%improvement in accuracy for the safety factor of anti-dip layered slopes compared to the method that does not consider residual strength,as validated against analytical solutions.We infer that the improved SPH method is effective and shows promise for applications to continuous and discontinuous rock masses.

关键词： Smoothed particle hydrodynamics Cracking strategy Residual stress Layered rock Crack propagation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Performance assessment of prefabricated vertical drains in mitigating soil reliquefaction subjected to repeated seismic events using shaking table experiments

引用

Frontiers of Structural and Civil engineering 2024年第3期18卷 411-427页

作者： Gowtham PADMANABHAN Ganesh Kumar SHANMUGAM Department of Earthquake engineering Indian Institute of Technology RoorkeeUttarakhand 247667India geotechnical engineering division CSIR-Central Building Research Institute Academy of Scientific and Innovative Research(AcSIR)Uttarakhand 247667India

The use of prefabricated vertical drains(PVD)in liquefiable deposits is gaining attention due to enhanced drainage.However,investigations on PVD in mitigating re-liquefaction during repeated shaking events are not available.This study performed a series of shaking table experiments on untreated and PVD-treated specimens prepared with 40%and 60%relative density.Repeated sinusoidal loading was applied with an incremental peak acceleration of 0.1g,0.2g,0.3g,and 0.4g,at 5 Hz shaking frequency with 40 s duration.The performance of treated ground was evaluated based on the generation and dissipation of excess pore water pressure(EPWP),induced sand densification,subsidence,and cyclic stress ratio.In addition,the strain accumulated in fresh and exhumed PVD was investigated using geotextile tensile testing apparatus aided with digital image correlation.No evidence of pore pressure was reported up to 0.2g peak acceleration for 40%and 60%relative density specimens.The continuous occurrence of soil densification and drainage medium restrained and delayed the generation of EPWP and expedited the dissipation process.This study demonstrates PVD can mitigate re-liquefaction,without suffering from deterioration,when subjected to medium to high intense repeated shaking events.

关键词： prefabricated vertical drains drainage re-liquefaction shaking table digital image correlation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thermo-hydro-mechanical (THM) coupled simulation of the land subsidence due to aquifer thermal energy storage (ATES) system in soft soils

引用

Journal of Rock Mechanics and geotechnical engineering 2024年第6期16卷 1952-1966页

作者： Yang Wang Fengshou Zhang Fang Liu Department of geotechnical engineering College of Civil EngineeringTongji UniversityShanghai200092China Key Laboratory of geotechnical and Underground engineering of Ministry of Education Tongji UniversityShanghai200092China Shanghai engineering and Technology Research Center of Shallow Geothermal Energy Shanghai200072China

Aquifer thermal energy storage(ATES)system has received attention for heating or cooling buildings.However,it is well known that land subsidence becomes a major environmental concern for ATES projects.Yet,the effect of temperature on land subsidence has received practically no attention in the past.This paper presents a thermo-hydro-mechanical(THM)coupled numerical study on an ATES system in Shanghai,China.Four water wells were installed for seasonal heating and cooling of an agriculture greenhouse.The target aquifer at a depth of 74e104.5 m consisted of alternating layers of sand and silty sand and was covered with clay.Groundwater level,temperature,and land subsidence data from 2015 to 2017 were collected using field monitoring instruments.Constrained by data,we constructed a field scale three-dimensional(3D)model using TOUGH(Transport of Unsaturated Groundwater and Heat)and FLAC3D(Fast Lagrangian Analysis of Continua)equipped with a thermo-elastoplastic constitutive model.The effectiveness of the numerical model was validated by field data.The model was used to reproduce groundwater flow,heat transfer,and mechanical responses in porous media over three years and capture the thermo-and pressure-induced land subsidence.The results show that the maximum thermoinduced land subsidence accounts for about 60%of the total subsidence.The thermo-induced subsidence is slightly greater in winter than that in summer,and more pronounced near the cold well area than the hot well area.This study provides some valuable guidelines for controlling land subsidence caused by ATES systems installed in soft soils.

关键词： Aquifer thermal energy storage(ATES) Land subsidence TOUGH-FLAC3D Thermo-elastoplastic constitutive model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fatigue properties and damage constitutive model of salt rock based on CT scanning

引用

International Journal of Mining Science and Technology 2024年第2期34卷 245-259页

作者： Junbao Wang Xiao Liu Qiang Zhang Xinrong Liu Zhanping Song Shijin Feng College of Civil engineering Xi’an University of Architecture and TechnologyXi’an 710055China Shaanxi Key Lab of geotechnical and Underground Space engineering Xi’an 710055China School of Civil engineering Chongqing UniversityChongqing 400045China Department of geotechnical engineering Tongji UniversityShanghai 200092China

To investigate the macroscopic fatigue properties and the mesoscopic pore evolution characteristics of salt rock under cyclic loading,fatigue tests under different upper-limit stresses were carried out on salt rock,and the mesoscopic pore structures of salt rock before and after fatigue tests and under different cycle numbers were measured using CT scanning instrument.Based on the test results,the effects of the cycle number and the upper-limit stress on the evolution of cracks,pore morphology,pore number,pore volume,pore size,plane porosity,and volume porosity of salt rock were analyzed.The failure path of salt rock specimens under cyclic loading was analyzed using the distribution law of plane porosity.The damage variable of salt rock under cyclic loading was defined on basis of the variation of volume porosity with cycle number.In order to describe the fatigue deformation behavior of salt rock under cyclic loading,the nonlinear Burgers damage constitutive model was further established.The results show that the model established can better reflect the whole development process of fatigue deformation of salt rock under cyclic loading.

关键词： Salt rock Cyclic loading CT scanning Mesoscopic pore evolution Constitutive model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A performance-based hybrid deep learning model for predicting TBM advance rate using Attention-ResNet-LSTM

引用

Journal of Rock Mechanics and geotechnical engineering 2024年第1期16卷 65-80页

作者： Sihao Yu Zixin Zhang Shuaifeng Wang Xin Huang Qinghua Lei Department of geotechnical engineering College of Civil EngineeringTongji UniversityShanghaiChina Key Laboratory of geotechnical and Underground engineering Ministry of EducationTongji UniversityShanghaiChina Department of Earth Sciences ETH ZürichZürichSwitzerland Department of Earth Sciences Uppsala UniversityUppsalaSweden

The technology of tunnel boring machine(TBM)has been widely applied for underground construction worldwide;however,how to ensure the TBM tunneling process safe and efficient remains a major concern.Advance rate is a key parameter of TBM operation and reflects the TBM-ground interaction,for which a reliable prediction helps optimize the TBM performance.Here,we develop a hybrid neural network model,called Attention-ResNet-LSTM,for accurate prediction of the TBM advance rate.A database including geological properties and TBM operational parameters from the Yangtze River Natural Gas Pipeline Project is used to train and test this deep learning model.The evolutionary polynomial regression method is adopted to aid the selection of input parameters.The results of numerical exper-iments show that our Attention-ResNet-LSTM model outperforms other commonly-used intelligent models with a lower root mean square error and a lower mean absolute percentage error.Further,parametric analyses are conducted to explore the effects of the sequence length of historical data and the model architecture on the prediction accuracy.A correlation analysis between the input and output parameters is also implemented to provide guidance for adjusting relevant TBM operational parameters.The performance of our hybrid intelligent model is demonstrated in a case study of TBM tunneling through a complex ground with variable strata.Finally,data collected from the Baimang River Tunnel Project in Shenzhen of China are used to further test the generalization of our model.The results indicate that,compared to the conventional ResNet-LSTM model,our model has a better predictive capability for scenarios with unknown datasets due to its self-adaptive characteristic.

关键词： Tunnel boring machine(TBM) Advance rate Deep learning Attention-ResNet-LSTM Evolutionary polynomial regression

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rock mass quality prediction on tunnel faces with incomplete multi-source dataset via tree-augmented naive Bayesian network

引用

International Journal of Mining Science and Technology 2024年第3期34卷 323-337页

作者： Hongwei Huang Chen Wu Mingliang Zhou Jiayao Chen Tianze Han Le Zhang Key Laboratory of geotechnical and Underground engineering of Ministry of Education Tongji UniversityShanghai 200092China Department of geotechnical engineering Tongji UniversityShanghai 200092China School of Civil engineering Beijing Jiaotong UniversityBeijing 100044China Qingdao Guoxin Second Jiaozhou Bay Subsea Tunnel Co. Ltd.Qingdao 266071China

Rock mass quality serves as a vital index for predicting the stability and safety status of rock tunnel faces.In tunneling practice,the rock mass quality is often assessed via a combination of qualitative and quantitative parameters.However,due to the harsh on-site construction conditions,it is rather difficult to obtain some of the evaluation parameters which are essential for the rock mass quality prediction.In this study,a novel improved Swin Transformer is proposed to detect,segment,and quantify rock mass characteristic parameters such as water leakage,fractures,weak interlayers.The site experiment results demonstrate that the improved Swin Transformer achieves optimal segmentation results and achieving accuracies of 92%,81%,and 86%for water leakage,fractures,and weak interlayers,respectively.A multisource rock tunnel face characteristic(RTFC)dataset includes 11 parameters for predicting rock mass quality is established.Considering the limitations in predictive performance of incomplete evaluation parameters exist in this dataset,a novel tree-augmented naive Bayesian network(BN)is proposed to address the challenge of the incomplete dataset and achieved a prediction accuracy of 88%.In comparison with other commonly used Machine Learning models the proposed BN-based approach proved an improved performance on predicting the rock mass quality with the incomplete dataset.By utilizing the established BN,a further sensitivity analysis is conducted to quantitatively evaluate the importance of the various parameters,results indicate that the rock strength and fractures parameter exert the most significant influence on rock mass quality.

关键词： Rock mass quality Tunnel faces Incomplete multi-source dataset Improved Swin Transformer Bayesian networks

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interaction Mechanisms between Natural Debris Flow and Rigid Barrier Deflectors:A New Perspective for Rational Design and Optimal Arrangement

引用

Computer Modeling in engineering & Sciences 2024年第5期139卷 1679-1699页

作者： Yu Huang Beilei Liu Dianlei Feng Hao Shi Department of geotechnical engineering College of Civil EngineeringTongji UniversityShanghai200092China Department of Hydraulic engineering College of Civil EngineeringTongji UniversityShanghai200092China

Rigid barrier deflectors can effectively prevent overspilling landslides,and can satisfy disaster prevention requirements.However,the mechanisms of interaction between natural granular flow and rigid barrier deflectors require further investigation.To date,few studies have investigated the impact of deflectors on controlling viscous debris flows for geological disaster prevention.To investigate the effect of rigid barrier deflectors on impact mechanisms,a numerical model using the smoothed particle hydrodynamics(SPH)method with the Herschel–Bulkley model is proposed to simulate the interaction between natural viscous flow and single/dual barriers with and without deflectors.This model was validated using laboratory flume test data from the literature.Then,the model was used to investigate the influence of the deflector angle and multi-barrier arrangements.The optimal configuration of multi-barriers was analyzed with consideration to the barrier height and distance between the barriers,because these metrics have a significant impact on the viscous flow pile-up,run-up,and overflow mechanisms.The investigation considered the energy dissipation process,retention efficiency,and dead-zone formation.Compared with bare barriers with similar geometric characteristics and spatial distribution,rigid barriers with deflectors exhibit superior effectiveness in preventing the overflow and overspilling of viscous debris flow.Recommendations for the rational design of deflectors and the optimal arrangement of multi-barriers are provided to mitigate geological disasters.

关键词： Rigid barrier deflectors deflector angle single-barrier dual-barrier arrangements viscous debris flow over-spilling delta-plus-SPH

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Development of multi-functional anchorage support dynamic-static coupling performance test system and its application

引用

International Journal of Mining Science and Technology 2024年第3期34卷 339-349页

作者： Qi Wang Shuo Xu Bei Jiang Chong Zhang Zhe Sun Jingxuan Liu Cailin Jiao State Key Laboratory for Tunnel engineering China University of Mining&Technology-BeijingBeijing 100083China Research Center of geotechnical and Structural engineering Shandong UniversityJinan 250061China

In underground engineering with complex conditions,the bolt(cable)anchorage support system is in an environment where static and dynamic stresses coexist,under the action of geological conditions such as high stresses and strong disturbances and construction conditions such as the application of high prestress.It is essential to study the support components performance under dynamic-static coupling conditions.Based on this,a multi-functional anchorage support dynamic-static coupling performance test system(MAC system)is developed,which can achieve 7 types of testing functions,including single component performance,anchored net performance,anchored rock performance and so on.The bolt and cable mechanical tests are conducted by MAC system under different prestress levels.The results showed that compared to the non-prestress condition,the impact resistance performance of prestressed bolts(cables)is significantly reduced.In the prestress range of 50–160 k N,the maximum reduction rate of impact energy resisted by different types of bolts is 53.9%–61.5%compared to non-prestress condition.In the prestress range of 150–300 k N,the impact energy resisted by high-strength cable is reduced by76.8%–84.6%compared to non-prestress condition.The MAC system achieves dynamic-static coupling performance test,which provide an effective means for the design of anchorage support system.

关键词： Anchorage support system Development of test system Dynamic-static coupling test Combined stress

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Seabed structures and foundations related to deep-sea resource development:A review based on design and research

引用

Deep Underground Science and engineering 2024年第2期3卷 131-148页

作者： Shengjie Rui Haojie Zhang Hang Xu Xing Zha Mengtao Xu Kanmin Shen Key Laboratory of Offshore Geotechnics and Material of Zhejiang Province College of Civil Engineering and ArchitectureZhejiang UniversityHangzhouChina Advanced Modelling Offshore EnergyNorwegian Geotechnical InstituteOsloNorway geotechnical Technology Center(Overseas engineering Center) PowerChina Huadong Engineering Corporation LimitedHangzhouChina

The deep‐sea ground contains a huge amount of energy and mineral resources,for example,oil,gas,and minerals.Various infrastructures such as floating structures,seabed structures,and foundations have been developed to exploit these resources.The seabed structures and foundations can be mainly classified into three types:subsea production structures,offshore pipelines,and anchors.This study reviewed the development,installation,and operation of these infrastructures,including their structures,design,installation,marine environment loads,and applications.On this basis,the research gaps and further research directions were explored through this literature review.First,different floating structures were briefly analyzed and reviewed to introduce the design requirements of the seabed structures and foundations.Second,the subsea production structures,including subsea manifolds and their foundations,were reviewed and discussed.Third,the basic characteristics and design methods of deep‐sea pipelines,including subsea pipelines and risers,were analyzed and reviewed.Finally,the installation and bearing capacity of deep‐sea subsea anchors and seabed trench influence on the anchor were reviewed.Through the review,it was found that marine environment conditions are the key inputs for any offshore structure design.The fabrication,installation,and operation of infrastructures should carefully consider the marine loads and geological conditions.Different structures have their own mechanical problems.The fatigue and stability of pipelines mainly depend on the soil‐structure interaction.Anchor selection should consider soil types and possible trench formation.These focuses and research gaps can provide a helpful guide on further research,installation,and operation of deep‐sea structures and foundations.

关键词： anchors floating structures pipelines risers subsea foundations

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Investigation of anisotropic strength criteria for layered rock mass

引用

Journal of Rock Mechanics and geotechnical engineering 2024年第4期16卷 1289-1304页

作者： Shuling Huang Jinxin Zhang Xiuli Ding Chuanqing Zhang Gang Han Guoqi Yu Lulu Qu Key Laboratory of geotechnical Mechanics and engineering of the Ministry of Water Resources Changjiang River Scientific Research InstituteWuhan430071China State Key Laboratory of Geomechanics and geotechnical engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430000China University of Chinese Academy of Sciences Beijing100049China

Layered rock mass is a type of engineering rock mass with sound mechanical anisotropy,which is generally unfavorable to the stability of underground works.To investigate the strength anisotropy of layered rock,the Mohr-Coulomb and Hoek-Brown criteria are introduced to establish the two transverse isotropic strength criteria based on Jaeger's single weak plane theory and maximum axial strain theory,and parameter determination methods.Furthermore,the sensitivity of strength parameters(K 1,K 2,and K 3)that are used to characterize the anisotropy strength of non-sliding failure involved in the strength criteria and confining pressure are investigated.The results demonstrate that strength parameters K 1 and K 2 affect the strength of layered rock samples at all bedding angles except for the bedding angle of 90°and the angle range that can cause the shear sliding failure along the bedding plane.The strength of samples at any bedding angle decreases with increasing K 1,whereas the opposite is for K 2.Except for bedding angles of 0°and 90°and the bedding angle range that can cause the shear sliding along the bedding plane,K 3 has an impact on the strength of rock samples with other bedding angles that the specimens'strength increases with increase of K 3.In addition,the strength of the rock sample increases as confining pressure rises.Furthermore,the uniaxial and triaxial tests of chlorite schist samples were carried out to verify and evaluate the strength criteria proposed in the paper.It shows that the predicted strength is in good agreement with the experimental results.To test the applicability of the strength criterion,the strength data of several types of rock in the literature are compared.Finally,a comparison is made between the fitting effects of the two strength criteria and other available criteria for layered rocks.

关键词： Layered rock Strength anisotropy Strength criterion Experimental verification

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：