检索结果-南通市图书馆

The use of Montgomery salivary bypass tubes and pharyngocutaneous fistula following salvage laryngectomy

World Journal of Otorhinolaryngology-Head and Neck Surgery 2024年第1期10卷 43-48页

作者： Courtney B.Shires Mackenzie Latour Merry Sebelik Karuna Dewan West cancer center GermantownTennesseeUSA Department of Otolaryngology-Head and Neck Surgery Louisiana State University Health ShreveportShreveportLouisianaUSA Department of Otolaryngology-Head and Neck Surgery Emory UniversityAtlantaGeorgiaUSA

Objectives:Pharyngocutaneous fistula(PCF)is the most common complication to follow total laryngectomy(TL)and is associated with increases in length of hospital stay and with a need for revision surgery or readmission,as well as with delays in return to oral diet.Patients who require salvageTL(STL)or primary(chemo)radiation therapy are at higher risk for developing PCF.Due to the quality‐of‐life burden of PCF on patients,limiting this occurrence is crucial.Methods:We conducted a retrospective cohort study of patients undergoing STL with placement of Montgomery salivary bypass tube(MSBT)^(TM)for at least 2 weeks duration between 2013 and 2017 at a single institution.Our patients all underwent free flap reconstruction.Our primary outcome of interest was development of PCF.Secondary outcomes included demographics,previous treatment,base of tongue(BOT)involvement,extent of defect,concurrent neck dissection(ND),and margin status.Univariateχ^(2) analysis was used to evaluate factors associated with PCF.Results:Forty‐four patients underwent STL with Montgomery tube placement and free flap reconstruction.Eight developed PCF(18.2%).The average age was 61.6 years;36 patients were male(81.8%),whereas eight patients were female(18.2%).There was no association between PCF and previous chemoradiation versus radiation(15.8%vs.33.3%,P<0.30),BOT involvement versus not(11.1 vs.22.2%,P<0.38),circumferential versus partial defect(18.8%vs.17.9%,P<0.94),ND versus none(10%vs.25%,P<0.20),or margin status.Conclusion:PCF complicated 18.2%of STL cases at our institution and was not associated with differences in primary treatment modality,presence of concomitant ND,extent of pharyngeal defect,BOT involvement,or positive frozen or permanent surgical margin.

关键词： free flap reconstruction Montgomery pharyngocutaneous fistula salivary bypass tube salvage total laryngectomy total laryngectomy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advances in Wireless,Batteryless,Implantable Electronics for Real‑Time,Continuous Physiological Monitoring

引用

Nano-Micro Letters 2024年第3期16卷 254-302页

作者： Hyeonseok Kim Bruno Rigo Gabriella Wong Yoon Jae Lee Woon‑Hong Yeo IEN center for Wearable Intelligent Systems and Healthcare Georgia Institute of TechnologyAtlantaGA 30332USA George W.Woodruff School of Mechanical Engineering Georgia Institute of TechnologyAtlantaGA 30332USA School of Electrical and Computer Engineering Georgia Institute of TechnologyAtlantaGA 30332USA Wallace H.Coulter Department of Biomedical Engineering Georgia Tech and Emory University School of MedicineAtlantaGA 30332USA Parker H.Petit Institute for Bioengineering and Biosciences Institute for MaterialsInstitute for Robotics and Intelligent MachinesGeorgia Institute of TechnologyAtlantaGA 30332USA

This review summarizes recent progress in developing wireless,batteryless,fully implantable biomedical devices for real-time continuous physiological signal monitoring,focusing on advancing human health care.Design considerations,such as biological constraints,energy sourcing,and wireless communication,are discussed in achieving the desired performance of the devices and enhanced interface with human tissues.In addition,we review the recent achievements in materials used for developing implantable systems,emphasizing their importance in achieving multi-functionalities,biocompatibility,and hemocompatibility.The wireless,batteryless devices offer minimally invasive device insertion to the body,enabling portable health monitoring and advanced disease diagnosis.Lastly,we summarize the most recent practical applications of advanced implantable devices for human health care,highlighting their potential for immediate commercialization and clinical uses.

关键词： Implantable electronics Biomedical systems Batteryless devices Wireless electronics Physiological signal monitoring

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Machine-learned wearable sensors for real-time hand-motion recognition: toward practical applications

引用

National Science Review 2024年第2期11卷 231-263页

作者： Kyung Rok Pyun Kangkyu Kwon Myung Jin Yoo Kyun Kyu Kim Dohyeon Gong Woon-Hong Yeo Seungyong Han Seung Hwan Ko Department of Mechanical Engineering Seoul National University IEN center for Human-Centric Interfaces and Engineering Institute for Electronics and NanotechnologyGeorgia Institute of Technology School of Electrical and Computer Engineering Georgia Institute of Technology Department of Chemical Engineering Stanford University Department of Mechanical Engineering Ajou University George W.Woodruff School of Mechanical Engineering Georgia Institute of Technology Institute of Advanced Machinery and Design(SNU-IAMD) Seoul National University

Soft electromechanical sensors have led to a new paradigm of electronic devices for novel motion-based wearable applications in our daily lives. However, the vast amount of random and unidentified signals generated by complex body motions has hindered the precise recognition and practical application of this technology. Recent advancements in artificial-intelligence technology have enabled significant strides in extracting features from massive and intricate data sets, thereby presenting a breakthrough in utilizing wearable sensors for practical applications. Beyond traditional machine-learning techniques for classifying simple gestures, advanced machine-learning algorithms have been developed to handle more complex and nuanced motion-based tasks with restricted training data sets. Machine-learning techniques have improved the ability to perceive, and thus machine-learned wearable soft sensors have enabled accurate and rapid human-gesture recognition, providing real-time feedback to users. This forms a crucial component of future wearable electronics, contributing to a robust human–machine interface. In this review, we provide a comprehensive summary covering materials, structures and machine-learning algorithms for hand-gesture recognition and possible practical applications through machine-learned wearable electromechanical sensors.

关键词： wearable sensor soft electronics artificial intelligence machine learning human–machine interfaces gesture recognition

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Cost-effective synthesis of giant molecule acceptors(GMAs)for stable polymer solar cells

引用

Science China Chemistry 2024年第4期67卷 1041-1043页

作者： Antonio Facchetti Department of Chemistry and the Materials Research center Northwestern University2145 Sheridan Road60208 EvanstonIllinoisUSA School of Materials Science and Engineering Georgia Institute of Technology771 Ferst Drive30332 AtlantaGeorgiaUSA

Polymer solar cells(PSCs)have emerged as a disruptive energy technology due to simple device architecture,earthabundant elemental composition,lightweight nature,and inherent mechanical flexibility[1,2].Via a strategic acceptordonor-acceptor(A-D-A)design of small-molecule acceptors(SMAs),device power conversion efficiency(PCE)has now increased>19%.

关键词： acceptor synthesis donor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Determination of Carbon and Nitrogen Isotope Fractions in Asparagine, Aspartic Acid, Threonine and Methionine

引用

American Journal of Analytical Chemistry 2024年第1期15卷 30-42页

作者： Lamzira Pharulava Levani Eliashvili Vakhtang Betlemidze Bachana Sulava National High Technology center of georgia Tbilisi Georgia

The nomenclature for compounds that are modified with isotopes is growing every day. Compounds can be modified with isotopes either individually, in a functional group or groups, or completely with all atomic centers of the element. This diversity of isotope-modified compounds increases the range of researches that can be studied using them. Compounds modified with isotopes of carbon-13 or nitrogen-15 can be converted into carbon monoxide, carbon dioxide and molecular nitrogen. Currently, only the average value of carbon-13 or nitrogen-15 isotopes can be determined. However, by directly determining the atomic share of these isotopes in organic compounds modified with isotopes, information about the isotopic centers of the element can be obtained. The atomic fraction of an element is defined as a single carbon or nitrogen isotope-modified center or centers, or all centers that are isotope-modified with that element at the same time. Carbon-13 or nitrogen-15 isotopes’ atomic fraction can be determined molecularly or with fragment ions of different elemental content, or both. This makes the method self-verifying, increasing the accuracy and reliability of the results obtained. Amino acids, such as asparagine, aspartic acid, methionine, and threonine, are essential for the human body. This proposed method of isotopic analysis will increase the possibilities for scientific research using these compounds.

关键词： Asparagine Aspartic Acid Threonine Methionine Mass Spectrometer Isotopic Analysis Atomic Share

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stripping of aggregate from mortar in waste concrete heated by microwave: Mechanisms of differential-temperature stress and vapor expansion pressure

引用

Journal of Traffic and Transportation Engineering(English Edition) 2024年第3期11卷 538-558页

作者： Yanping Sheng Xiao Huan Peizhen Hu Liangliang Li Ahmed Abdulakeem Zhoujing Ye Linbing Wang Yanping Yin School of Materials Science and Engineering Chang'an University Engineering Research center of Transportation Materials Ministry of Education Chang'an University National center for Materials Service Safety University of Science and Technology Beijing School of Environmental Civil Agricultural and Mechanical Engineering College of Engineering University of Georgia

Microwave heating, which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the selective liberation of concrete's raw constituents(particularly aggregate) for recycling by considering the water content of concrete as a parameter of microwave heating for the first time. The deterioration law of the concrete's performance was characterized by the variation in the splitting tensile strength and relative dynamic modulus after heating by microwave at different water contents. Besides,tests were conducted to evaluate the performance of the interface transition zone(ITZ)between aggregate and mortar as well as to investigate the reasons for the stripping behavior of aggregate-mortar, which included the interface tensile strength test, temperature measurement, and porosity test. The deterioration law of splitting tensile strength and relative dynamic modulus revealed that the performance of concrete was subject to different degrees of damage depending on the water content. Furthermore, experimental results showed that interface bonding strength between aggregate and mortar was dramatically impaired, and a large temperature difference was generated between the aggregate and mortar during microwave heating. Meanwhile, the permeable pores increased considerably even when the specimens were dried. In the presence of water, the intactness of ITZ between aggregate and mortar was destroyed by microwave heating, and its performance was significantly lowered, which led to the occurrence of stripping behavior between aggregate and mortar. This was reaffirmed by the microstructure presented by scanning electron microscopy. Thus, the newly developed microwave pretreatment improved by providing appropriate water contents for concrete corresponding to different strength grades is a promising method for recycling aggregate from waste concrete.

关键词： Waste concrete Recycled aggregate Microwave heating Stripping behavior Differential-temperature stress Vapor expansion pressure

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Whyand how tousethe SeqCode

引用

mLife 2024年第1期3卷 1-13页

作者： Wiliam B.Whitman Maria Chuvochina Brian P.Hedlund Konstantinos T.Konstantinidis Marike Palmer Luis M.Rodriguez-R lain Sutcliffe Fengping Wang Deparment of Microbioogy University of GeorgiaAthensGeorgiaUAA Schoolof Chemistry and Molecular Biosciences Australian CentreforEogenomicsThe Universty of QueenslandSt LuciaAustralia University of Nevada Las Vegas Las VegasNevadaUSA Schol of Civil and Environmental Engineering and School of Biological SciencesGeorgia Institute of TechnologyAtlantaGeorgiaUSA Department of Microbiology University of ManitobaWinnipegManitobaCanada School of Life Sciences University of Nevada Las VegasLas VegasNevadaUSA Department of Microbiology and Digital Science center(DiSC) University of InnsbruckInnsbruckAustria Faculty of Health&Life Sciences Northumbria UniversityNewcastle upon TyneUK School of Oceanography International Center for Deep Life InvestigationShanghai Jiao Tong UniversityShanghaiChina

The SeqCode,formally called the Code of Nomenclature of Prokaryotes Described from Sequence Data,is a new code of nomenclature in which genome sequences are the nomenclatural types for the names of prokaryotic species.While similar to the International Code of Nomenclature of Prokaryotes(ICNP)in structure and rules of priority,it does not require the deposition of type strains in international culture collections.Thus,it allows for the formation of permanent names for uncultured prokaryotes whose nearly complete genome sequences have been obtained directly from environmental DNA as well as other prokaryotes that cannot be deposited in culture collections.Because the diversity of uncultured prokaryotes greatly exceeds that of readily culturable prokaryotes,the SeqCode is the only code suitable for naming the majority of prokaryotic species.The start date of the SeqCode was January 1,2022,and the online Registry(https://seqco.del)was created to ensure valid publication of names.The SeqCode recognizes all names validly published under the ICNP before 2022.After that date,names validly published under the SeqCode compete with ICNP names for priority.As a result,species can have only one name,either from the SeqCode or ICNP,enabling effective communication and the creation of unified taxonomies of uncultured and cultured prokaryotes.The SeqCode is administered by the SeqCode Committee,which is comprised of the SeqCode Community and elected administrative components.Anyone with an interest in the systematics of prokaryotes is encouraged to join the SeqCode Community and participate in the development of this resource.

关键词： genome sequences metagenome-assembled genomes nomenclature SeqCode

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Automated, economical, and environmentally-friendly asphalt mix design based on machine learning and multi-objective grey wolf optimization

引用

Journal of Traffic and Transportation Engineering(English Edition) 2024年第3期11卷 381-405页

作者： Jian Liu Fangyu Liu Linbing Wang Department of Civil and Environmental Engineering Virginia Polytechnic Institute and State University School of Environmental CivilAgricultural and Mechanical EngineeringUniversity of Georgia Illinois center for Transportation Department of Civil and Environmental EngineeringUniversity of Illinois Urbana-Champaign

The increasing impact of the greenhouse effect on ecosystems is prompting transportation agencies to seek methods for reducing CO2emissions during pavement construction and maintenance.Additionally,the laboratory mix design process,which involves selecting aggregate gradation and binder content,is time-consuming and labor-intensive.To accelerate the traditional mix design procedure,this study presented a mix design procedure that can automatically determine gradation and binder content based on machine learning （ML） and a meta-heuristic algorithm.Specifically,ML approaches were employed to model the relationship between volumetric properties (mixture bulk specific gravity（Gmb） and air void （VV）) and both mixture component properties and mixture proportion,based on a dataset collected from literature with 660 mixture designs.Integrated with the prediction of ML models and the modified multi-objective grey wolf optimization （MOGWO）algorithm,an automatic asphalt mix design was proposed to pursue three goals,including VV,cost,and CO2emission.The results indicated that least squares support vector regression （LSSVR） and e Xtreme gradient boosting （XGBoost） achieved the highest prediction accuracies （correlation coefficient:0.92 for VV and 0.96 for Gmb）.The MOGWO algorithm successfully found the 26 optimal mix designs for the case of VV vs.cost vs.CO2emission.Compared to the traditional laboratory design,the optimal mixture with VV of4%achieves a cost saving of 2.46%and a reduction of 4.03%in carbon emission.The volumetric properties of the mixtures output by the approach also align closely with values measured in a laboratory.

关键词： Asphalt mix design Machine learning MOGWO CO 2 emission Volumetric properties

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Plasmonic quantum dots modulated nano-mineral toward photothermal reduction of CO_(2)coupled with biomass conversion

引用

Nano Research 2024年第6期17卷 5061-5072页

作者： Guangbiao Cao Haoran Xing Haoguan Gui Chao Yao Yinjuan Chen Yongsheng Chen Xiazhang Li National-local Joint Engineering Research center of Biomass Refining and High-quality Utilization Changzhou UniversityChangzhou 213164China School of Civil and Environmental Engineering Georgia Institute of TechnologyAtlantaGA 30332-0373USA

Simultaneous conversion of CO_(2)and biomass into value-added chemicals through solar-driven catalysis holds tremendous importance for fostering a sustainable circular economy.Herein,plasmonic Bi quantum dots were immobilized on phosphoric acid modified attapulgite(P-ATP)nanorod using an in-situ reduction-deposition method,and were employed for photocatalytic reduction of CO_(2)coupled with oxidation of biomass-derived benzyl alcohol.Results revealed that Bi atoms successfully integrated into the basal structure of P-ATP,forming chemically coordinated Bi-O-Si bonds that served as efficient transportation channels for electrons.The incorporation of high-density monodispersed Bi quantum dots induced a surface plasmon resonance(SPR)effect,expanding the light absorption range into the near-infrared region.As a consequence,the photo-thermal transformation was significantly accelerated,leading to enhanced reaction kinetics.Notably,50%Bi/P-ATP nanocomposite exhibited the highest plasmon-mediated photocatalytic CH4 generation(115.7μmol·g^(−1)·h^(−1))and CO generation(44.9μmol·g^(−1)·h^(−1)),along with remarkable benzaldehyde generation rate of 79.5μmol·g^(−1)·h^(−1)in the photo-redox coupling system under solar light irradiation.The hydrogen protons released from the oxidation of benzyl alcohol facilitated the incorporation of more hydrogen protons into CO_(2)to form key CH_(3)O−intermediates.This work demonstrates the synergistic solar-driven valorization of CO_(2)and biomass using natural mineral based catalyst.

关键词： photothermal catalysis clay mineral plasmon CO_(2)reduction biomass conversion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Water–solid contact electrification and catalysis adjusted by surface functional groups

引用

Nano Research 2024年第4期17卷 3344-3351页

作者： Yusen Su Andy Berbille Zhong Lin Wang Wei Tang CAS center for Excellence in Nanoscience Beijing Institute of Nanoenergy and NanosystemsChinese Academy of SciencesBeijing100083China School of Nanoscience and Technology University of Chinese Academy of SciencesBeijing100049China georgia Institute of Technology AtlantaGA 30332-0245USA

Chemical functional groups on solid surfaces greatly influence contact electrification(CE)at water–solid interfaces.Previous studies of their effects mainly swapped materials or bonded related molecules to a substrate,introducing other factors of influence.This work aims at unambiguously demonstrating the role of functional groups in water-polymer CE.We study the contribution of functional groups,by using ion coupled plasma etching to modify a high-density polyethylene(HDPE)film,a polymer with a naturally quasi-null charge transfer ability.Fluoride(HDPE–F)and hydroxyl(HDPE–OH)functional groups are generated and endowed HDPE with charge withdrawing ability.HDPE–F withdraws 2.5–2.7 times more charges than HDPE–OH.Concurrently,the surface charges accumulated generate electrostatic forces,altering the droplets motion.This phenomenon provides another approach to study CE,helping to evaluate the contribution of electrons to solid–liquid CE.Finally,employing HDPE–F to perform contact-electro-catalysis shows its activity is 2.4 times higher than that of commercial fluorinated films.

关键词： contact-electro-catalysis charge transfer solid–liquid interfaces contact electrification

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：