检索结果-南通市图书馆

Iso-propyl caprylate and iso-propyl linolenate synthetic fluids as novel alternatives in deep-water drilling operations:Critical fluid properties and aerobic biodegradability assessments

引用

Petroleum 2024年第2期10卷 254-264页

作者： Adewale Johnson Folayan Adewale Dosunmu Aleruchi Boniface Oriji department of Petroleum and gas engineering University of Port HarcourtNigeria Professor of Petroleum and gas engineering University of Port HarcourtNigeria

Present drilling fluids for deep water wells have severe degenerative effect on the environment with high operational and disposal ***,making them less desirable in recent *** synthetic drilling fluid provides a novel environmentally friendly alternative but conventional ester-based drilling fluids exhibit high viscosities in deep-water wells causing excessive equivalent circulating density(ECD)and increased risk of lost circulation owing to narrow mud density *** study experimentally investigates the critical fluid properties and aerobic biodegradability potentials of two newly developed deep-water synthetic ester drilling fluids namely:iso-propyl caprylate(COIPE)and iso-propyl linolenate(LOIPE)synthetic fluids and their comparison with synthetic-paraffin(SP-SBF)and isomerized-olefin(IOSBF)synthetic hydrocarbon *** esters of iso-propyl caprylate and iso-propyl linolenate were produced from the isolation of ester mixtures that were obtained from the homogeneous catalytic transesterification of coconut and linseed plant oil biomass *** COIPE was isolated from the coconut oil iso-propyl ester mixture by low-pressure fractional distillation *** fractional distillation and crystallization were used to isolate the LOIPE ester from the linseed oil iso-propyl ester ***,the aerobic biodegradation investigation was conducted by a modified oxygen consumption respirometry *** GC-MS analysis of the COIPE and LOIPE showed that the former contains essentially of lower saturated carbon compounds(C8).Whereas the latter contains higher molecular weight and unsaturated carbon compounds(C18+).The COIPE and LOIPE kinematic viscosity values are in good agreement with that of the reference synthetic hydrocarbon fluid samples(SP-SBF and IO-SBF).Although,the COIPE synthetic ester has lower viscosity value owing to the presence of shorter chain and saturated carbon atoms(C8 esters).Similarly,the linolenic oil iso

关键词： Aerobic biodegradation Critical fluid properties Deep-water wells Esters'isolation:isomerized-olefin(IO-SBF) Iso-propyl caprylate(COIPE) Iso-propyl linolenate(LOIPE) Respirometry technique Synthetic-paraffin(SP-SBF)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Production optimization in a fractured carbonate reservoir with high producing GOR

引用

Energy Geoscience 2024年第4期5卷 224-239页

作者： Amin Izadpanahi Reza Azin Shahriar Osfouri Reza Malakooti Escola Politécnica Universidade de São PauloBrazil department of Petroleum engineering Faculty of Petroleum Gas&Petrochemical EngineeringPersian Gulf UniversityBushehrIran department of Chemical engineering Faculty of Petroleum Gas&Petrochemical EngineeringPersian Gulf UniversityBushehrIran Computer Modelling Group LondonUK

The gas-Oil Ratio(GOR)is a crucial production parameter in oil *** increase in GOR results in higher gas production and lower oil production,potentially leading to well shut-ins due to economic *** study focuses on a real fractured oil field that requires urgent production operations to reduce the producing *** this study,the static model for the field was developed using commercial software,involving steps such as data collection,fault modeling,meshing,and statistical analysis to prepare for dynamic *** dynamic model incorporates geometry,gridding,and rock properties from the static model,utilizing a dual-porosity approach for the naturally fractured reservoir and the Peng-Robinson equation for fluid phase *** reservoir conditions,production history,and rock-fluid interactions were defined,with relative permeability curves indicating a water-wet reservoir and low critical gas saturation affecting the *** better understand the relationship between reservoir and production parameters,a detailed sensitivity analysis was performed using the Response Surface Methodology(RSM).Following the sensitivity analysis,a history matching process was conducted using the Designed Exploration and Controlled Evolution(DECE)optimizer to validate the model for future *** operational scenarios were defined to decrease the production GOR and enhance final recovery from the *** results indicate that the water injection scenario is effective in preventing the GOR increase by maintaining reservoir pressure,thereby sustaining production over a longer *** scenario also improves oil recovery by approximately 6%compared to the base ***,optimization was carried out using the DECE optimizer for each scenario to fine-tune the operational *** goal was to maximize oil revenue for each scenario during the optimization *** study stands out as one of the few that provides a comprehensive analysis

关键词： Reservoir simulation Sensitivity analysis Response surface methodology High gas-oil ratio Production optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An improved deviation model for transonic stages in axial compressors

引用

Chinese Journal of Aeronautics 2024年第7期37卷 93-108页

作者： Xiaochen WANG Xuesong LI Xiaodong REN Chunwei GU Xiaobin QUE Guoyu ZHOU department of Energy and Power engineering Tsinghua UniversityBeijing 100084China China United gas Turbine Technology Co.Ltd. Beijing 102209China

Deviation model is an important model for through-flow analysis in axial *** analysis in classical deviation models is developed under the assumption of onedimensional flow,which is controlled by the continuity *** consider three-dimensional characteristics in transonic flow,this study proposes an improved theoretical analysis method combining force analysis of the blade-to-blade flow with conventional analysis of the continuity *** of shock structures on transverse force,streamwise velocity and streamline curvature in the blade-to-blade flow are analyzed,and support the analytical modelling of density flow ratio between inlet and outlet ***,a novel deviation model for transonic stages in axial compressors is proposed in this *** empirical coefficients are corrected based on the experimental data of a linear cascade,and the prediction accuracy is validated with the experimental data of a three-stage transonic *** novel model provides accurate predictions for meridional flow fields at the design point and performance curves at design speed,and shows obvious improvements on classical models by Carter and C¸etin.

关键词： Axial compressor Transonic flow Deviation model Through-flow method Aerodynamic performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An efficient data-driven global sensitivity analysis method of shale gas production through convolutional neural network

引用

Petroleum Science 2024年第4期21卷 2475-2484页

作者： Liang Xue Shuai Xu Jie Nie Ji Qin Jiang-Xia Han Yue-Tian Liu Qin-Zhuo Liao State Key Laboratory of Petroleum Resources and engineering China University of Petroleum (Beijing) department of Oil-gas Field Development engineering College of Petroleum Engineering China University of Petroleum (Beijing) Chuanqing Drilling engineering Co.Ltd. China National Petroleum Corporation

The shale gas development process is complex in terms of its flow mechanisms and the accuracy of the production forecasting is influenced by geological parameters and engineering parameters. Therefore, to quantitatively evaluate the relative importance of model parameters on the production forecasting performance, sensitivity analysis of parameters is required. The parameters are ranked according to the sensitivity coefficients for the subsequent optimization scheme design. A data-driven global sensitivity analysis(GSA) method using convolutional neural networks(CNN) is proposed to identify the influencing parameters in shale gas production. The CNN is trained on a large dataset, validated against numerical simulations, and utilized as a surrogate model for efficient sensitivity analysis. Our approach integrates CNN with the Sobol' global sensitivity analysis method, presenting three key scenarios for sensitivity analysis: analysis of the production stage as a whole, analysis by fixed time intervals, and analysis by declining rate. The findings underscore the predominant influence of reservoir thickness and well length on shale gas production. Furthermore, the temporal sensitivity analysis reveals the dynamic shifts in parameter importance across the distinct production stages.

关键词： Shale gas Global sensitivity Convolutional neural network Data-driven

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Enhancement of ionic conductivity and fracture toughness by infiltrating porous Li_(0.33)La_(0.56)TiO_(3) pellets

引用

Journal of Rare Earths 2024年第2期42卷 392-398,I0006页

作者： Xiaojuan Lu Mingyang Duan Jingyu Xiang Yuning Liang Songtao Liu Hebei Key Lab of Power Plant Flue gas Multi-Pollutants Control Department of Environmental Science and EngineeringNorth China Electric Power UniversityBaoding071003China

Although solid-state lithium electrolytes have the potential to reduce the safety issues associated with organic liquid electrolytes,disadvantages such as low total conductivity,large interface impedance,and delamination of the interface due to cyclic stress still need to be *** solid-state lithium-ion conductor Li_(0.33)La_(0.56)TiO_(3)(LLTO) was prepared via a hydrothermal route by using CTAB as templates in this *** LLTO with micro-porous channels was obtained and the total conductivity is comparable to the non-porous *** LLTO pellets are infiltrated with the non-porous LLTO precursor solution,and the total conductivities of the infiltrated porous LLTO are all higher than those without *** infiltration,the porous LLTO calcined at 600℃ achieves the highest total conductivity,7.88×10^(-5) S/*** fracture toughness of the infiltrated LLTO is higher than that of the non-porous *** results demonstrate a new way to prepare solid-state lithium-ion conductors with high ionic conductivity and great tolerance to cyclic stress.

关键词： Perovskite Porous material Infiltration Ionic conductors Fracture toughness Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of fracture fluid flowback on shale microfractures using CT scanning

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第2期16卷 426-436页

作者： Jiale He Zhihong Zhao Yiran Geng Yuping Chen Jianchun Guo Cong Lu Shouyi Wang Xueliang Han Jun Zhang State Key Laboratory of Oil and gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Key Laboratory of Thermo-Fluid Science and engineering of Ministry of Education School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an710049China Drilling Test engineering department of Longdong Oil and gas Development Company Changqing OilfieldPetroChina Company LimitedQingyang745000China Tight Oil and gas Exploration and Development Project department PetroChina Southwest Oil and Gas Field CompanyChengdu610056China No.11 Oil Production Plant Changqing Oilfield CompanyPetroChina Company LimitedQingyang745000China

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional *** the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not *** this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is ***,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface *** flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

关键词： Shale Flowback of fracturing fluid Microfracture Lattice Boltzmann method(LBM)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applications of artificial intelligence in geothermal resource exploration: A review

引用

Deep Underground Science and engineering 2024年第3期3卷 269-285页

作者： Mahmoud AlGaiar Mamdud Hossain Andrei Petrovski Aref Lashin Nadimul Faisal School of engineering Robert Gordon UniversityAberdeenUK National Subsea Centre AberdeenUK Petroleum and Natural gas engineering department College of EngineeringKing Saud UniversityRiyadhSaudi Arabia

Artificial intelligence (AI) has become increasingly important in geothermal exploration,significantly improving the efficiency of resource *** review examines current AI applications,focusing on the algorithms used,the challenges addressed,and the opportunities *** addition,the review highlights the growth of machine learning applications in geothermal exploration over the past decade,demonstrating how AI has improved the analysis of subsurface data to identify potential *** techniques such as neural networks,support vector machines,and decision trees are used to estimate subsurface temperatures,predict rock and fluid properties,and identify optimal drilling *** particular,neural networks are the most widely used technique,further contributing to improved exploration ***,the widespread adoption of AI in geothermal exploration is hindered by challenges,such as data accessibility,data quality,and the need for tailored data science training for industry ***,the review emphasizes the importance of data engineering methodologies,data scaling,and standardization to enable the development of accurate and generalizable AI models for geothermal *** is concluded that the integration of AI into geothermal exploration holds great promise for accelerating the development of geothermal energy *** effectively addressing key challenges and leveraging AI technologies,the geothermal industry can unlock cost‐effective and sustainable power generation opportunities.

关键词： artificial intelligence geothermal energy geothermal exploration geothermometry hidden/blind geothermal resources machine learning

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Solidification crack characteristics and sensitivity of peritectic steel

引用

Journal of Iron and Steel Research International 2024年第7期31卷 1668-1679页

作者： Ya-qiang Li Jian-hua Liu Zi-ming Wang Ying-ying Li Yang He Xiao-wei Li department of Automotive engineering Hebei Vocational University of Technology and EngineeringXingtai 054000HebeiChina Hebei Special Vehicle Modification Technology Innovation Center Hebei Vocational University of Technology and EngineeringXingtai 054000HebeiChina Institute of engineering Technology University of Science and Technology BeijingBeijing 100083China School of Petroleum and Natural gas engineering Changzhou UniversityChangzhou 213164JiangsuChina

The characteristics and sensitivity of solidification cracks in peritectic steels were investigated using directional solidifi-cation *** cracks were observed in both hypoperitectic steels(12CrlMoV,15CrMo)and hyper-peritectic steel(20CrMo)during solidification at growth velocities of 15,50,and 80 pm/*** the dendritic boundaries,sulphide precipitates were found,promoting crack *** on the statistical analysis of interdendritic cracks in peritectic steels,the area ratio(RA)of interdendritic cracks in a directional solidification structure was proposed to evaluate the crack sensitivity of peritectic ***,the crack sensitivities of peritectic steels(12CrlMoV,15CrMo,and 20CrMo)were tested,evaluated,and compared with the surface crack rates of three types of steels produced from a steel *** results demonstrated that RA was in good agreement with that of the steel plant,and the crack sensitivity of 12CrlMoV steel was the strongest,followed by that of 15CrMo and 20CrMo ***,RA can be used to evaluate the crack sensitivity of peritectic steel.

关键词： Peritectic steel-Directional solidification Growth velocity Dendritic structure Solidification crack Crack sensitivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Simulation Method and Feature Analysis of Shutdown Pressure Evolution During Multi-Cluster Fracturing Stimulation

引用

Energy engineering 2024年第1期121卷 111-123页

作者： Huaiyin He Longqing Zou Yanchao Li Yixuan Wang Junxiang Li Huan Wen Bei Chang Lijun Liu Shale gas Exploration and Development department CNPC Chuanqing Drilling Engineering Co.Ltd.Chengdu610051China College of Energy Chengdu University of TechnologyChengdu610059China

Multistage multi-cluster hydraulic fracturing has enabled the economic exploitation of shale reservoirs,but the interpretation of hydraulic fracture parameters is *** pressure signals after pump shutdown are influenced by hydraulic fractures,which can reflect the geometric features of hydraulic *** shutdown pressure can be used to interpret the hydraulic fracture parameters in a real-time and cost-effective *** this paper,a mathematical model for shutdown pressure evolution is developed considering the effects of wellbore friction,perforation friction and fluid loss in *** efficient numerical simulation method is established by using the method of *** on this method,the impacts of fracture half-length,fracture height,opened cluster and perforation number,and filtration coefficient on the evolution of shutdown pressure are *** results indicate that a larger fracture half-length may hasten the decay of shutdown pressure,while a larger fracture height can slow down the decay of shutdown pressure.A smaller number of opened clusters and perforations can significantly increase the perforation friction and decrease the overall level of shutdown pressure.A larger filtration coefficient may accelerate the fluid filtration in the fracture and hasten the drop of the shutdown *** simulation method of shutdown pressure,as well as the analysis results,has important implications for the interpretation of hydraulic fracture parameters.

关键词： Multistage multi-cluster hydraulic fracturing pump shutdown pressure feature analysis numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhanced Hoek-Brown(H-B)criterion for rocks exposed to chemical corrosion

引用

International Journal of Mining Science and Technology 2024年第5期34卷 609-630页

作者： Hao Li Leo Pel Zhenjiang You David Smeulders department of Mechanical engineering Eindhoven University of TechnologyEindhoven 5600 MBthe Netherlands department of Applied Physics Eindhoven University of TechnologyEindhoven 5600 MBthe Netherlands Center for Sustainable Energy and Resources School of EngineeringEdith Cowan UniversityJoondalupWA 6027Australia School of Chemical engineering The University of QueenslandBrisbaneQLD 4072Australia gas and Energy Transition Research Centre The University of QueenslandBrisbaneQLD 4072Australia

Underground constructions often encounter water environments,where water–rock interaction can increase porosity,thereby weakening engineering ***,the failure criterion for chemically corroded rocks becomes essential in the stability analysis and design of such *** study enhances the applicability of the Hoek-Brown(H-B)criterion for engineering structures operating in chemically corrosive conditions by introducing a kinetic porosity-dependent instantaneous mi(KPIM).A multiscale experimental investigation,including nuclear magnetic resonance(NMR),X-ray diffraction(XRD),scanning electron microscopy(SEM),pH and ion chromatography analysis,and triaxial compression tests,is employed to quantify pore structural changes and their linkage with the strength responses of limestone under coupled chemical-mechanical(C-M)*** employing ion chromatography and NMR analysis,along with incorporating the principles of free-face dissolution theory accounting for both congruent and incongruent dissolution,a kinetic chemical corrosion model is *** model aims to calculate the kinetic porosity alterations within rocks exposed to varying H+concentrations and ***,utilizing the generalized mixture rule(GMR),the kinetic porositydependent mi is *** of the KPIM-enhanced H-B criterion using compression test data from 5 types of rocks demonstrated a high level of consistency between the criterion and the experimental results,with a coefficient of determination greater than 0.96,a mean absolute percentage error less than 4.84%,and a root-mean-square deviation less than 5.95 ***,the physical significance of the porosity-dependent instantaneous mi is clarified:it serves as an indicator of a rock’s capacity to leverage the confining pressure effect.

关键词： Hoek-Brown(H-B)criterion Instantaneous mi Kinetic porosity-dependency Chemical corrosion Compressive strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：