检索结果-南通市图书馆

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science Bulletin 2024年第2期69卷 227-236页

作者： Yue Ren Qing Zhou Dongpeng Hua Zhuobin Huang Yulong Li Qian Jia Peter Gumbsch Christian Greiner Haifeng Wang Weimin Liu State Key Laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsNorthwestern Polytechnical UniversityXi’an 710072China institute for Applied materials Karlsruhe Institute of TechnologyKarlsruhe 76131Germany IAM-ZM MicroTribology CenterμTC Karlsruhe Institute of TechnologyKarlsruhe 76131Germany fraunhofer iwm Freiburg 79108Germany State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

Traditional high strength engineering alloys suffer from serious surface brittleness and inferior wear performance when servicing under sliding contact at cryogenic temperature.Here,we report that the recently emerging CoCrNi multi-principal element alloy defies this trend and presents dramatically enhanced wear resistance when temperature decreases from 273 to 153 K,surpassing those of cryogenic austenitic steels.The temperature-dependent structure characteristics and deformation mechanisms influencing the cryogenic wear resistance of CoCrNi are clarified through microscopic observation and atomistic simulation.It is found that sliding-induced subsurface structures show distinct scenarios at different deformation temperatures.At cryogenic condition,significant grain refinement and a deep plastic zone give rise to an extended microstructural gradient below the surface,which can accommodate massive sliding deformation,in direct contrast to the strain localization and delamination at 273 K.Meanwhile,the temperature-dependent cryogenic deformation mechanisms(stacking fault networks and phase transformation)also provide additional strengthening and toughening of the subsurface material.These features make the CoCrNi alloy particularly wear resistant at cryogenic conditions and an excellent candidate for safety–critical applications.

关键词： Multi-principal element alloy Cryogenic temperature Wear CoCrNi

Strong shock propagation for the finite-source circular blast in a confined domain

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and mechanics(English Edition) 2024年第6期45卷 1071-1084页

作者： Qihang MA Kaileong CHONG Bofu WANG Quan ZHOU Shanghai Key Laboratory of mechanics in Energy Engineering Shanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200072China Shanghai institute of Aircraft mechanics and Control Shanghai 200092China

The circular explosion wave produced by the abrupt discharge of gas from a high-temperature heat source serves as a crucial model for addressing explosion phenomena in compressible flow.The reflection of the primary shock and its propagation within a confined domain are studied both theoretically and numerically in this research.Under the assumption of strong shock,the scaling law governing propagation of the main shock is proposed.The dimensionless frequency of reflected shock propagation is associated with the confined distance.The numerical simulation for the circular explosion problem in a confined domain is performed for validation.Under the influence of confinement,the principal shock wave systematically undergoes reflection within the domain until it weakens,leading to the non-monotonic attenuation of kinetic energy in the explosion fireball and periodic oscillations of the fireball volume with a certain frequency.The simulation results indicate that the frequency of kinetic energy attenuation and the volume oscillation of the explosive fireball align consistently with the scaling law.

关键词： explosion confinement main shock frequency

Magnetic behaviors and magnetocaloric effects in rare earth high-entropy amorphous/nanocrystalline alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 129-136,I0005页

作者： Lin Xue Liliang Shao Baosen Zhang Zongzhen Li Jiangbo Cheng Baolong Shen College of mechanics and materials Hohai UniversityNanjing211106China School of materials Science and Engineering Jiangsu Key Laboratory of Advanced Metallic MaterialsSoutheast UniversityNanjing211189China School of materials Science and Engineering Nanjing Institute of TechnologyNanjing211167China Jiangsu JITRI Advanced Energy materials Research institute Co. Ltd.Changzhou213000China

Rare earth high-entropy alloys(RE-HEAs)exhibit great potential to be applied as refrigerants due to their good comprehensive magnetocaloric properties.In this work,octary GdTbDyHoErTmCoAl and GdTbDyHoErTmCoNi RE-HEAs with amorphous/nanocrystalline structure exhibiting comparable magnetocaloric effect were synthesized.Both RE-HEAs show a second-order magnetic phase transition in the temperature range of hydrogen liquefaction.Due to the complex magnetic interactions,a spin glasslike behavior at low temperatures is observed in the RE-HEAs.A superior magnetocaloric effect is obtained in the nanocrystalline GdTbDyHoErTmCoNi high-entropy alloy that is multiphase attributed to a stronger magnetic exchange interaction when compared with the other that exhibits single amorphous structure.Despite heterogeneous microstructure,homogeneous chemical distributions are observed in the partially crystallized high-entropy alloy.In addition,the magnetocaloric effect and magnetic transition behavior of rare earth medium-and high-entropy alloys,including the RE-HEAs in this study,are summarized and discussed.The results in this work provide a helpful guide for the design of RE-HEAs for hydrogen liquefaction applications with excellent magnetocaloric effects.

关键词： Rare earths High-entropy alloy Metallic glass Magnetocaloric effect

Ultra-high-temperature application of MXene: Stabilization of 2D Ti_(3)C_(2)T_(x) for cross-scale strengthening and toughening of 3D TiC

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第1期13卷 1-10页

作者： Lu Liu Guobing Ying Quanguo Jiang Dong Wen Peng Wang Meng Wu Ziying Ji Yongting Zheng Xiang Wang Department of materials Science and Engineering College of Mechanics and MaterialsHohai UniversityNanjing 211100China Key Laboratory of Superlight materials&Surface Technology Ministry of EducationHarbin Engineering UniversityHarbin 150001China Shenzhen Key Laboratory for Advanced materials School of Materials Science and EngineeringHarbin Institute of Technology(Shenzhen)Shenzhen 518055China Center for Composite materials and Structures Harbin Institute of TechnologyHarbin 150001China

Transition metal carbide/nitride cores within MXenes make them considerably useful for ultra-high-temperature reinforcement.However,extensive research on Ti_(3)C_(2)T_(x) MXene has revealed its tendency to undergo a phase transition to TiCy at temperatures above 800℃due to high activity of a superficial Ti atomic layer.Herein,spark plasma sintering of Ti_(3)C_(2)T_(x) and TiC is performed to prevent the Ti_(3)C_(2)T_(x) phase transition at temperatures up to 1900℃through the fabrication of composites at a pressure of 50 MPa.Using a focused ion beam scanning electron microscope to separate layered substances in the composites and examining selected area diffraction spots in a transmission electron microscope enabled identification of non-phase-transitioned MXene.First-principles calculations based on density functional theory indicated the formation of strong chemical bonding interfaces between Ti_(3)C_(2)T_(x) and TiC,which imposed a stability constraint on the Ti atomic layer at the Ti_(3)C_(2)T_(x) surface.Mechanical performance tests,such as three-point bending and fracture toughness analysis,demonstrated that the addition of Ti_(3)C_(2)T_(x) can effectively improve the cross-scale strengthening and toughening of the TiC matrix,providing a new path for designing and developing two-dimensional(2D)carbides cross-scale-enhanced three-dimensional(3D)carbides with the same elements relying on a wide variety of MXenes.

关键词： MXene ultra-high-temperature phase stability interface bonding cross-scale strengthening and toughening structural ceramic composites

Theoretical Analysis of the Buckling Behaviors of Inhomogeneous Shape Memory Polymer Composite Laminates Considering Prestrains

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第2期37卷 271-284页

作者： Hanxing Zhao Pengyu Cao Fengfeng Li Xin Lan Liwu Liu Yanju Liu Jinsong Leng Centre of Composite materials and Structures Harbin Institute of Technology(HIT)Harbin150080China Department of Astronautical Science and mechanics Harbin Institute of Technology(HIT)Harbin150001China

The mismatch in thermal expansion coefficients between the fiber-rich and resin-rich regions of a shape memory polymer composite(SMPC)laminate,along with the residual strain during SMPC fabrication,results in buckling deformation of the inhomogeneous laminate.This paper presents a macroscopic model for buckling of an inhomogeneous SMPC laminate under initial biaxial prestrains.Both linear and nonlinear buckling analyses are carried out using the energy method.The influences of prestrain biaxiality,temperature,and ply angle on the buckling wavelength,critical buckling prestrain,and buckling amplitude are calculated.The results demonstrate that the critical buckling wavelength of the SMPC laminate is independent of the prestrain,while the amplitude is almost independent of temperature.In addition,the optimal fiber stacking configuration with the maximum critical buckling prestrains of inhomogeneous SMPC laminates is determined by a genetic algorithm.

关键词： Shape memory polymer composite Buckling behavior Inhomogeneous laminate Biaxial prestrains

An improved interval model updating method via adaptive Kriging models

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and mechanics(English Edition) 2024年第3期45卷 497-514页

作者： Sha WEI Yifeng CHEN Hu DING Liqun CHEN Shanghai Key Laboratory of mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200072China Shanghai institute of Aircraft mechanics and Control Shanghai 200092China

Interval model updating(IMU)methods have been widely used in uncertain model updating due to their low requirements for sample data.However,the surrogate model in IMU methods mostly adopts the one-time construction method.This makes the accuracy of the surrogate model highly dependent on the experience of users and affects the accuracy of IMU methods.Therefore,an improved IMU method via the adaptive Kriging models is proposed.This method transforms the objective function of the IMU problem into two deterministic global optimization problems about the upper bound and the interval diameter through universal grey numbers.These optimization problems are addressed through the adaptive Kriging models and the particle swarm optimization(PSO)method to quantify the uncertain parameters,and the IMU is accomplished.During the construction of these adaptive Kriging models,the sample space is gridded according to sensitivity information.Local sampling is then performed in key subspaces based on the maximum mean square error(MMSE)criterion.The interval division coefficient and random sampling coefficient are adaptively adjusted without human interference until the model meets accuracy requirements.The effectiveness of the proposed method is demonstrated by a numerical example of a three-degree-of-freedom mass-spring system and an experimental example of a butted cylindrical shell.The results show that the updated results of the interval model are in good agreement with the experimental results.

关键词： interval model updating(IMU) non-probabilistic uncertainty adaptive Kriging model surrogate model grey number

Dirac method for nonlinear and non-homogenous boundary value problems of plates

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and mechanics(English Edition) 2024年第1期45卷 15-38页

作者： Xiaoye MAO Jiabin WU Junning ZHANG Hu DING Liqun CHEN Shanghai Key Laboratory of mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200444China Shanghai institute of Aircraft mechanics and Control Shanghai 200092China

The boundary value problem plays a crucial role in the analytical investigation of continuum dynamics. In this paper, an analytical method based on the Dirac operator to solve the nonlinear and non-homogeneous boundary value problem of rectangular plates is proposed. The key concept behind this method is to transform the nonlinear or non-homogeneous part on the boundary into a lateral force within the governing function by the Dirac operator, which linearizes and homogenizes the original boundary, allowing one to employ the modal superposition method for obtaining solutions to reconstructive governing equations. Once projected into the modal space, the harmonic balance method(HBM) is utilized to solve coupled ordinary differential equations(ODEs)of truncated systems with nonlinearity. To validate the convergence and accuracy of the proposed Dirac method, the results of typical examples, involving nonlinearly restricted boundaries, moment excitation, and displacement excitation, are compared with those of the differential quadrature element method(DQEM). The results demonstrate that when dealing with nonlinear boundaries, the Dirac method exhibits more excellent accuracy and convergence compared with the DQEM. However, when facing displacement excitation, there exist some discrepancies between the proposed approach and simulations;nevertheless, the proposed method still accurately predicts resonant frequencies while being uniquely capable of handling nonuniform displacement excitations. Overall, this methodology offers a convenient way for addressing nonlinear and non-homogenous plate boundaries.

关键词： rectangular plate Dirac operator nonlinear boundary time-dependent boundary boundary value problem

Parametric resonance of axially functionally graded pipes conveying pulsating fluid

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and mechanics(English Edition) 2024年第2期45卷 239-260页

作者： Jie JING Xiaoye MAO Hu DING Liqun CHEN Shanghai Key Laboratory of mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200444China Shanghai institute of Aircraft mechanics and Control Shanghai 200092China

Based on the generalized Hamilton's principle,the nonlinear governing equation of an axially functionally graded(AFG)pipe is established.The non-trivial equilibrium configuration is superposed by the modal functions of a simply supported beam.Via the direct multi-scale method,the response and stability boundary to the pulsating fluid velocity are solved analytically and verified by the differential quadrature element method(DQEM).The influence of Young's modulus gradient on the parametric resonance is investigated in the subcritical and supercritical regions.In general,the pipe in the supercritical region is more sensitive to the pulsating excitation.The nonlinearity changes from hard to soft,and the non-trivial equilibrium configuration introduces more frequency components to the vibration.Besides,the increasing Young's modulus gradient improves the critical pulsating flow velocity of the parametric resonance,and further enhances the stability of the system.In addition,when the temperature increases along the axial direction,reducing the gradient parameter can enhance the response asymmetry.This work further complements the theoretical analysis of pipes conveying pulsating fluid.

关键词： pipe conveying fluid axially functionally graded supercritical resonance multi-scale method parametric resonance

Resolving aging dynamics of a 3D colloidal glass

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,mechanics & Astronomy) 2024年第3期67卷 110-118页

作者： XiaoJuan Wang Jun Duan Gan Ding YunZhuo Lu Xing Lu LanHong Dai MinQiang Jiang State Key Laboratory of Nonlinear mechanics Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of materials Science and Engineering Dalian Jiaotong UniversityDalian 116028China School of Engineering Science University of Chinese Academy of SciencesBeijing 100049China

Physical aging is an inherent property of glassy matter, but understanding its microscopic mechanism remains a challenge particularly at the particle level. In this work, we use a confocal microscope to in-situ trace the particle trajectories in a 3D colloidal glass for 73000 s, aiming at resolving the aging dynamics. By calculating the mean square displacement of particle motions, we find that the glass aging with time can be divided into three stages: β relaxation, α relaxation and free diffusion. The system's mean square displacement at each aging state is quantitatively resolved into three contributions of particle dynamics modes: vibration within the nearest-neighbor cages, hopping between cages and cooperative rearrangement. We further calculate the particle's free volume and find that the β-to-α transition is accompanied by the temporary increase of the system-averaged free volume due to pronounced hops of particles. Nevertheless, the temporal autocorrelation of the free volume spatial distribution still obeys a monotonically stretched exponential decay with an exponent of 0.76, which is related to the sub-diffusion dynamics of cooperative rearrangements and hops mixed in α relaxation. According to the resolved vibrational displacements,we calculate the vibrational density of states of this 3D glass, and the characteristic boson peak is reproduced at low frequencies.Our findings shed insight into the particle-level aging dynamics of a real glass under purely thermal activation.

关键词： colloidal glass physical aging particle dynamics free volume boson peak