检索结果-南通市图书馆

Biomass-derived porous carbon with single-atomic cobalt toward high-performance aqueous zinc-sulfur batteries at room temperature

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 325-335,I0008页

作者： Shenfei Zhao Xiaoshuai Wu Jiliang Zhang Chunjie Li Zixiang Cui Weihua Hu Ruguang Ma Changming Li institute for Clean Energy&Advanced materials School of Materials&EnergySouthwest UniversityChongqing 400715China institute for materials science and Devices School of Materials Science and EngineeringSuzhou University of Science and TechnologySuzhou 215009JiangsuChina School of materials science and Engineering Dalian Jiaotong UniversityDalian 116028LiaoningChina

Aqueous zinc-sulfur batteries at room temperature hold great potential for next-generation energy storage technology due to their low cost,safety and high energy ***,slow reaction kinetics and high activation energy at the sulfur cathode pose great challenges for the practical ***,biomass-derived carbon with single-atomic cobalt sites(MMPC-Co)is synthesized as the cathode in Zn-S *** catalysis of single-atom Co sites greatly promotes the transform of cathode electrolyte interface(CEI)on the cathode surface,while offering accelerated charge transfer rate for high conversion reversibility and large electrochemical surface area(ECSA)for high electrocatalytic ***,the rich pore structure not only physically limits sulfur loss,but also accelerates the transport of zinc *** addition,the large pore volume of MMPC-Co is able to relieve the stress effect caused by the volume expansion of Zn S during charge/discharge cycles,thereby maintaining the stability of electrode ***,the sulfur cathode maintains a high specific capacity of 729.96 m A h g^(-1)after 500 cycles at4 A g^(-1),which is much better than most cathode materials reported in the *** work provides new insights into the design and development of room-temperature aqueous Zn-S batteries.

关键词： Biomass-derived carbon Single-atom catalysts Rich pore structure Sulfur cathode Aqueous zinc-sulfur batteries

Preparation of CIP@TiO_(2) composite with broadband electromagnetic wave absorption properties

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第1期31卷 197-205页

作者： Qiang Su Hanqun Wang Yunfei He Dongdong Liu Xiaoxiao Huang Bo Zhong School of materials science and Engineering Harbin Institute of TechnologyWeihaiWeihai 264209China School of materials science and Engineering Harbin Institute of TechnologyHarbin 150001China

Scholars aim for the improved impedance matching (Z) of materials while maintaining their excellent wave absorption properties. Based on the hydrolysis characteristics of isopropyl titanate, a simple preparation process for the coating of carbonyl iron powder(CIP) with TiO_(2) was designed. Given the TiO2coating, the Z of the CIP@TiO_(2) composite was adjusted well by decreasing the dielectric constant. Moreover, the interfacial polarization of CIP@TiO_(2) was enhanced. Ultimately, the electromagnetic-wave (EMW) absorption property of the CIP@TiO_(2)composite was improved substantially, the minimum reflection loss reached-46.07 dB, and the effective absorption bandwidth can reach 8 GHz at the composite thickness of 1.5 mm. Moreover, compared with CIP, the oxidation resistance of CIP@TiO_(2)showed remarkable improvement. The results revealed that the oxidation starting temperature of CIP@TiO_(2) as about 400℃,whereas the uncoated CIP had an oxidation starting temperature of approximately 250℃. Moreover, the largest oxidation rate temperature of CIP@TiO_(2) increased to around 550℃. This work opens up a novel strategy for the production of high-performance EMW absorbers via structural design.

关键词： carbonyl iron@titanium dioxide electromagnetic-wave absorption impedance matching oxidation resistance

Cobalt phosphide-based composites as anodes for lithium-ion batteries:From mechanism,preparation to performance

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第5期88卷 11-31页

作者： Bo Lan Yishan Wang Jialei Lu Dongdong Liu Chuncheng Wei Xueqian Zhang Xiaoxiao Huang Guangwu Wen School of materials science and Engineering Shandong University of TechnologyZibo255000China School of materials science and Engineering Harbin Institute of TechnologyHarbin150001China School of materials science and Engineering Harbin Institute of TechnologyWeihai264209China

With the further requirements of electronic products and powered vehicles,the development of a new generation with low-voltage and high-capacity anode materials is crucial for lithium-ion batteries(LIBs).Transition metal phosphides,especially cobalt phosphide(CoP)composites,have become a research hotspot for LIBs anode materials in recent years due to their high theoretical specific capacity,low polarization,and suitable voltage *** review first systematically discusses the lithium storage mechanism and preparation methods of CoP in current ***,the applications of CoP anode materials in LIBs are categorically reviewed,including the composites of CoP with various types of carbon materials and ***,the challenges and future development directions of CoP anode materials are summarized to provide guidance for further improving the lithium storage performance of CoP and its practical applications.

关键词： CoP Composites Preparation Anodes Lithium-ion batteries

Nanocavity enriched CuPd alloy with high selectivity for CO_(2) electroreduction toward C_(2)H_(4)

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1513-1523页

作者： Ze-Yu Zhang Hai-Bin Wang Fei-Fei Zhang Jing-Wei Li Xin-Zhuo Hu Si-Wei Yan Yi-Ming Bai Xun Zhang Gu-Rong Shen Peng-Fei Yin Jing Yang Cun-Ku Dong Jing Mao Hui Liu Xi-Wen Du institute of New-Energy materials School of Materials Science and EngineeringTianjin UniversityTianjin300350China

Electrocatalysis of CO_(2)reduction reaction is an effective way to convert CO_(2)into high value-added products,but the selectivity of Cu-based catalysts for C2+products needs to be improved due to the high energy barrier of C-C ***,a viable catalyst design strategy to decrease energy barrier of C-C coupling should be put ***,a nanocavity-enriched CuPd single atom alloy(CuPd SAA)catalyst is designed to promote CC coupling *** faradaic efficiency of CuPd SAA for ethylene and C_(2+)reaches 75.6%and 85.7%at-0.7 V versus reversible hydrogen electrode(RHE),*** on the results given by in situ characterization,the porous hollow structure dramatically increases the ratio of the linear-bond*CO,thus enhancing the faradaic efficiency for *** functional theory(DFT)calculation reveals that the Pd doping can regulate the electronic structure of neighboring Cu atoms to decrease the energy barrier of C-C coupling,further improving the faradaic *** work provides a new idea for designing catalyst with high selectivity for ethylene.

关键词： Adsorption configuration C-C coupling CO_(2) electrocatalysis Ethylene Single atom alloy

Growth,optical dispersion and magnetic behavior of Dy^(3+) doped yttrium iron garnet crystals

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1110-1117,I0004页

作者： Yating Fang Hui Shen Yudie Ma Shijie Liao Shuang Xia Tian Tian Ding Zhou Yunfeng Ma Jiayue Xu institute of Crystal Growth School of Materials Science and EngineeringShanghai Institute of Technology National Engineering Center of Electromagnetic Radiation Control materials School of Electronic Science and EngineeringUniversity of Electronic Science and Technology of China

Y_(3)Fe_(5)O_(12)(YIG)crystals are highly desirable for the fabrication of mid-infrared isolators with the rapid growth of optical communications,although it is rather challenging to grow large size and high-quality single ***^(3+)doping is expected to improve the optical and magneto-optical prope ***,high quality Dy:YIG crystals and the adjustment of Dy^(3+)on the structure and optical behavior of YIG crystal remain unclear,impeding its practical ***,a series of Y_(3-x)Dy_(x)Fe_(5)O_(12)(x=0,0.5,1.0,1.5,3)solid solution crystals was grown by the flux-Bridgman method and single crystals up to 25 mm were *** the introduction of Dy^(3+),lattice parameters are gradually enlarged from 1.2379 nm(YIG)to 1.2420 nm(DyIG).Typical Dy^(3+)absorption peaks are observed around 1070,1265 and 1670 *** refractive index decreases from 2.37(500 nm)to 2.10(2500 nm)for YIG crystal,and it reduces from 2.47(500 nm)to 2.16(2500 nm)for DyIG *** optical bandgaps remain almost unchanged for Dy:YIG *** optical dispersion of the refractive indices was finely fitted by the Wemple and DiDomenico(WDD)and the Sellmeier models,*** the increase of Dy^(3+)content,the saturation magnetization(Ms)decreases significantly from 23.62 emu/g(YIG)to 5.33 emu/g(DyIG).Small coercive field is persisted for this system,endowing small external magnetic *** results provide valuable references for the manipulation of rare earths on the properties of magnetooptical crystals,which is beneficial to the design of high-performance garnet crystals for the application of optical switching and non-reciprocal related devices.

关键词： Magneto-optical crystal Yttrium iron garnet Dy^(3+)doping Crystal growth Optical dispersion Rare earths

Adverse effect of niobium and boron on hot deformation behavior of sulfur-containing steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第1期31卷 252-263页

作者： Guo-ning He Shi-qi Wan Bo Jiang Chao-lei Zhang Ya-zheng Liu Chun-jing Wu School of materials science and Engineering University of Science and Technology BeijingBeijing100083China institute for Advanced materials and Technology University of Science and Technology BeijingBeijing100083China

The hot deformation behaviors of sulfur-containing gear steel 20MnCr5 containing three different contents of Nb and B(0,0.021%Nb,and 0.024%Nb-0.0022%B)were *** compression and tenssion tests were carried out by Gleeble3800 at the austenite region from 850 to 1150℃and the adverse effects of Nb and B were analyzed by the fracture,microstructure and precipitate *** compression tests showed that the proportions of instable area in hot processing maps of 0.021%Nb and Nb-B steels were higher and the deformability of Nb free steel was *** tensile deformation experiments showed that the reduction areas of Nb free,0.021%Nb and Nb-B steels were 92%-99%,84%-98%and 67%-97%,*** addition of Nb or Nb and B inhibited the dynamic recrystallization during hot deformation,and consequently,more deformed grains were then formed in 0.021%Nb and Nb-B steels thus to obtain the microstructure with worse uniformity and then deteriorate the *** addition,the interaction between inclusions and microalloyed elements was also *** particles of 0.021%Nb and Nb-B steels dynamically precipitated during deformation and precipitated together with MnS thus to worsen the deformability,resulting in the decrease of reduction area.

关键词： Hot deformation Gear steel Processing map Dynamic recrystallization Microalloying

Spark Plasma Sintering of Boron Carbide Using Ti_(3)SiC_(2) as a Sintering Additive

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials science) 2024年第3期39卷 645-650页

作者： Hülya Biçer Mustafa Tuncer Hasan Göçmez Iurii Bogomol Valerii Kolesnichenko Andrey Ragulya Kutahya Dumlupinar University School of EngineeringDepartment of Metallurgical and Materials EngineeringKütahya 43100Tur-key Boron Based Advanced Ceramics Application and Research Center Kütahya Dumlupınar UniversityKütahya 43100Turkey Advanced Technologies Center(İLTEM) Kütahya Dumlupınar UniversityKütahya 43000Turkey Department of High-Temperature Ma-terials and Powder Metallurgy National Technical University of Ukraine“Igor Sikorsky Kyiv Polytechnic Institute”Kyiv 03056Ukraine frantsevich institute for problems of materials science National Academy of Sciences of UkraineKyiv 03056Ukraine

Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its *** approach to overcome this limitation is the addition of secondary phases into boron *** carbide based composite ceramics are produced by the direct addition of secondary phases into the structure or via reactive sintering using a sintering *** present study investigated the effect of Ti_(3)SiC_(2) addition to boron carbide by reactive spark plasma sintering in the range of 1700-1900℃.Ti_(3)SiC_(2) phase decomposed at high temperatures and reacted with B4C to form secondary phases of TiB2 and *** results demonstrated that the increase of Ti_(3)SiC_(2) addition(up to 15 vol%)effectively promoted the densification of B4C and yielded higher ***,as the amount of Ti_(3)SiC_(2) increased further,the formation of microstructural inhomogeneity and agglomeration of secondary phases caused a decrease in hardness.

关键词： reactive sintering SPS boron carbide MAX phase

Improvement for creep strength of a second-generation single crystal superalloy by design of heat treatments

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 342-350页

作者： Wan-Shun Xia Xin-Bao Zhao Jia-Chen Xu Quan-Zhao Yue Qing-Qing Ding Huan-Chang Duan Yue-Feng Gu Hong-Bin Bei Ze Zhang institute of Superalloys science and Technology School of Materials Science and EngineeringZhejiang UniversityHangzhou 310027China State Key Laboratory of Silicon and Advanced materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310027China

Design of heat treatments is related to the key technology for development of nickel-based single crystal superalloys(Ni-SXs). Based on the full understanding of the solidification characteristics, this work applies optimization design of heat treatments for a second-generation Ni-SX. Microstructure evolution and creep properties are compared in the material under conventional/standard(Std.) and optimized(Opt.) treatments. For the Std. sample,strong dendritic segregations determine inconsistent microstructure evolution in the dendritic(D) and interdendritic region(ID), while the latter serves as weak area to have the prior microcrack initiation, damaging overall performance of the alloy. The Opt. treatment applies higher homogenization temperature, leading to overall reduced segregations, while not inducing incipient melting. A lower temperature of first-step ageing is used to lower the size ofγ'particles. These help to form the more uniform microstructure in dendritic and interdendritic region and relieve the inconsistent microstructure evolution. The balanced local strength makes ID no longer as the weak area,thus restricting microcrack initiation. Great improvement of high temperature and low stress property is obtained by this progress, leading to the pronounced increase of creep rupture life under 1100 °C/140 MPa.

关键词： Single crystal superalloy Heat treatment Segregation Solidification Creep property

Review on the design of high-strength and hydrogen-embrittlement-resistant steels

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第7期31卷 1572-1589页

作者： Zhiyu Du Rongjian Shi Xingyu Peng Kewei Gao Xiaolu Pang Beijing Advanced Innovation Center for materials Genome Engineering School of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China institute for materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110010China

Given the carbon peak and carbon neutrality era,there is an urgent need to develop high-strength steel with remarkable hydrogen embrittlement *** is crucial in enhancing toughness and ensuring the utilization of hydrogen in emerging iron and steel ***,the pursuit of enhanced metallic materials presents a cross-disciplinary scientific and engineering *** high-strength,toughened steel with both enhanced strength and hydrogen embrittlement(HE)resistance holds significant theoretical and practical *** ensures secure hydrogen utilization and further carbon neutrality objectives within the iron and steel *** on the design principles of high-strength steel HE resistance,this review provides a comprehensive overview of research on designing surface HE resistance and employing nanosized precipitates as intragranular hydrogen *** also proposes feasible recommendations and prospects for designing high-strength steel with enhanced HE resistance.

关键词： hydrogen embrittlement surface design hydrogen traps nanosized precipitates