检索结果-南通市图书馆

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 25-36页

作者： Jue ZHU Longyuan LI Ningtao ZHU Zhejiang Provincial engineering Research Center for the Safety of Pressure Vessel and Pipeline Key Laboratory of Impact and Safety engineering (Ningbo University) Ministry of Education School of engineering Computing and Mathematics University of Plymouth Xi'an Zhanshi Testing & engineering co.ltd.

Carbon nanotubes(CNTs) have garnered great attention in recent years due to their outstanding electrical, thermal, and mechanical properties. The incorporation of small amounts of CNTs in polymers can substantially improve the sensitivity of the polymer's electrical conductivity. This paper presents a modified Maxwell model to evaluate the electrical conductivity of CNTs-filled polymer composites by introducing a transition zone to account for the tunneling effect. In this modified Maxwell model, the CNTs-filled polymer composite is modeled as a three-phase composite, consisting of a matrix(polymer), inclusions(CNTs), and a transition zone(tunneling zone). The effective electrical conductivity(EEC) of the composite is calculated based on the volume fractions and electrical conductivities of the matrix, inclusions, and transition zone. The model's validity is confirmed through the use of available test data, which demonstrates its capability to accurately capture the nonlinear conductivity behavior observed in CNTs-polymer composites. This study offers valuable insights into the design of high-performance conductive polymer nanocomposites, and enhances the understanding of electrical conduction mechanisms in CNT-dispersed polymer composites.

关键词： Nanoclay

Automatic and Rapid Throughflow-Based Optimal Design Method for Multi-Stage Axial-Flow compressors

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of thermal Science 2025年第1期34卷 77-91页

作者： LEI Fan ZHANG Xiawen JU Yaping ZHANG Chuhua Department of fluid Machinery and engineering School of Energy and Power EngineeringXi'an Jiaotong University Production and Environmental Department China Huaneng Group.Co.Ltd. State Key Laboratory for Strength and Vibration of Mechanical Structures Xi'an Jiaotong University

Throughflow design has the advantages of less time consumption and large optimization space,and thus is the corner stone of advanced design system of multi-stage axial-flow *** majority of relevant studies were limited to the throughflow inverse designs,and quite few works have been till now devoted to the throughflow optimal *** this work,an automatic and rapid throughflow-based optimal design method is proposed for axial-flow compressors in which a throughflow inverse design solver is embedded in optimal genetic algorithm to improve the design efficiency of axial-flow *** types of design parameters in the throughflow inverse design of axial-flow compressors,i.e.,swirl and shroud curve,are simultaneously used to optimize both the blade shape and flow *** proposed method is validated by the redesign optimization of the benchmark axial-flow compressor NASA Stage 35,and the CFD predictions show that the throughflow-based optimization leads to 1.18% efficiency benefit at design *** proposed method is then utilized to the two-dimensional throughflow optimal design of a large-scale 6.5-stage axial-flow industrial *** optimal design results are confirmed by CFD predictions,indicating that the proposed method can effectively improve the design adiabatic efficiency of the compressors by 1.09% within a few minutes on desk-top *** throughflow design implications are also obtained for advanced axial-flow industrial *** work could enhance the capability of throughflow design method and has engineering application value to explore the throughflow optimization space of multi-stage axial-flow compressors.

关键词： NASA

Numerical Simulation of Radiation Transport to Improve Microalgae Cultivation in an Air-Lift Photobioreactor

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of thermal Science 2025年第1期34卷 62-76页

作者： ZHANG Xianbin LI Mingjia HUNG Tzuchen ZHANG Zixun Key Laboratory of Thermo-fluid Science and engineering of Ministry of Education School of Energy and Power EngineeringXi'an Jiaotong University School of Mechanical engineering Beijing Institute of Technology Department of Mechanical engineering Taipei University of Technology

A comprehensive numerical model is developed to simulate the growth of microalgae under light/dark cycling *** purpose of this study is to predict the growth rate of Chlorella vulgaris cultivated in photobioreactors(PBRs) in order to improve the light conditions for microalgae and enhance the photosynthetic *** fluid dynamics(CFD) is used to simulate its internal hydrodynamic *** Lagrangian method is employed to track the movement of microalgae *** radiative transfer equation(RTE)is used to obtain light intensity *** combination of light radiation field and microalgae cell motions is used to construct the light history and they are integrated into the model of the photosynthetic units(PSU) to calculate the microalgae growth *** numerical results demonstrate that enhanced light/dark cycling frequency with ordered mixing can promote efficient microalgae *** effect of the vortex flow field generated by the baffles in an air-lift PBR is analyzed for increasing microalgae growth *** using the 1:1 baffle spacing,the biomass production of microalgae is increased by 41.8% compared to the original PBR.

关键词： light distribution particle tracking photobioreactor structure optimization

A Wind Tunnel Experimental Study on the Wake Characteristics of a Horizontal Axis Wind Turbine

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of thermal Science 2025年第1期34卷 145-158页

作者： GUO Xingduo LI Yinran LI Rennian MA Yulong WEI Kui college of Energy and Power engineering Lanzhou University of Technology Key Laboratory of fluid Machinery and Systems Gansu Provincial Technology Centre for Wind Turbines

The characteristics of wind turbine wakes are influenced by multiple factors,including the atmospheric boundary layer(ABL) wind and wind turbine operating conditions(e.g.,tip speed ratio and yaw angle).In this study,two types of ABL winds with different velocity gradients and turbulence intensities are generated in a wind tunnel through configurations of spires,baffles,and various numbers of roughness elements.A wind turbine with a rotor diameter of 0.8 m and a hub height of 0.6 m is tested under varying tip speed ratios,yaw angles,and ABL wind *** results indicate that the streamwise velocity deficit in the near-wake region becomes more pronounced with an increase in the tip speed ratio,while the far-wake velocity deficit remains largely unaffected by changes in the tip speed *** the yaw angle increases,the wake deflection becomes more prominent and the wake narrows;the offset of the wake center at various downstream positions grows linearly,reaching a maximum value of approximately half the rotor ***,the turbulence level and influence range in the wake region are reduced when the turbine is *** ABL wind conditions,high turbulence intensity in the incoming flow accelerates wake recovery,and the Reynolds stress at different lateral positions tends to become consistent with increasing longitudinal ***,turbulence has a significant impact on the meandering characteristics of the wind turbine wake,with greater fluctuations in the wake center observed under higher turbulence ***,this study provides insights that could inform the optimal operation of wind farms.

关键词： horizontal axis wind turbine turbulence wind tunnel experiment wind turbine wake

Laser‑Induced Highly Stable conductive Hydrogels for Robust Bioelectronics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 117-120页

作者： Yibo Li Hao Zhou Huayong Yang Kaichen Xu State Key Laboratory of fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310058People’s Republic of China

Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm *** address these challenges,*** Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer *** laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1)with a spatial resolution down to 5μ***,they maintain impedance and charge-storage capacity even after 1 h of *** micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.

关键词： Laser processing conductive hydrogels Stable interface Bio-interfacing electrodes Bioelectronic application

维普期刊数据库

Experimental Study for Effect of Multi-Site Spark Ignition on Dedicated Hybrid Engine Performance under High Dilution condition

在线全文

学校读者我要写书评

暂无评论

Journal of thermal Science 2025年第1期34卷 254-267页

作者： YAN Bowen WATERS Benjamin HAINES Andrew MCGHEE Mike HU Tiegang DENG Wei PU Yongxian MA Tianyu Powertrain engineering R&D Center Chongqing Changan Automobile Co.Ltd. Changan UK R&D Centre Limited

In this study,a triple spark ignition scheme was first designed on a three-cylinder 1.5-L dedicated hybrid engine（DHE）.On this basis,the effect of different ignition modes on engine combustion and emission characteristics was studied,especially under high dilution *** results tested at 2000 r/min and 0.8 MPa BMEP（brake mean effective pressure） show that with highly increased in-cylinder flow intensity,using only passive prechamber（PPC） has a lower lean limit than that with single central spark plug（CSP）,thereby leading to slightly higher minimum fuel consumption and nitrogen oxides（NOx） *** side spark plugs（SSP）based on PPC can result in improved capability of lean limit extension and engine performance than ***,the improvement level is lower than that with triple spark plugs（TSP）.As the excess air ratio λincreases,the advantage of PPC and PPC with SSP in improving the combustion phasing compared with CSP gradually ***,the increasing tendency of their ignition delay and combustion duration is more *** added SSP based on PPC can effectively shorten the ignition delay of leaner mixture,but the combustion duration can be only slightly *** a result,under extremely lean condition,the advantage of PPC and PPC with SSP in terms of combustion characteristics over CSP becomes much *** contrast,the TSP ignition can achieve much shorter ignition delay and combustion duration simultaneously under this *** to the highest available dilution level,the TSP ignition achieves the lowest raw ***,it can also reduce the raw carbon monoxide（co） and hydrocarbons（HC） emissions compared to CSP due to a more thorough combustion of the end gas *** on the excellent performance of TSP,the highest engine brake thermal efficiency（BTE） was further *** results show that with normal RON 92 fuel,the engine finally achieved 43.69% and 45.02% BTE under stochiometric mode with exhaust

关键词： dedicated hybrid engine high dilution condition NOx emissions passive prechamber thermal efficiency triple spark plug scheme

Enhancing Solar Photovoltaic Efficiency:A computational fluid Dynamics Analysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy engineering 2025年第1期122卷 153-166页

作者： Rahool Rai Fareed HussainMangi Kashif Ahmed Sudhakar Kumaramsay Faculty of Mechanical and Automotive engineering Universiti Malaysia Pahang Al-Sultan AbdullahPekan26600PahangMalaysia Faculty of engineering Science&Technology Hamdard UniversityKarachi74600Pakistan Electrical engineering Department SUKKUR IBA UniversitySukkur65200Pakistan Berlin School of Business and Innovation BSBI Faculty of Computer Science and InformaticsBerlin12043Germany Automotive engineering Centre University Malaysia Pahang Al Sultan AbdullahPekan26600PahangMalaysia Centre for Research in Advanced fluid&Processes(fluid Centre) Universiti Malaysia Pahang Al-Sultan Abdullah(UMPSA)Paya BesarKuantan26300PahangMalaysia

The growing need for sustainable energy solutions,driven by rising energy shortages,environmental concerns,and the depletion of conventional energy sources,has led to a significant focus on renewable *** energy,among the various renewable sources,is particularly appealing due to its abundant ***,the efficiency of commercial solar photovoltaic(PV)modules is hindered by several factors,notably their conversion efficiency,which averages around 19%.This efficiency can further decline to 10%–16%due to temperature increases during peak sunlight *** study investigates the cooling of PV modules by applying water to their front surface through computational fluid dynamics(CFD).The study aimed to determine the optimal conditions for cooling the PV module by analyzing the interplay between water film thickness,Reynolds number,and their effects on temperature reduction and heat *** CFD analysis revealed that the most effective cooling condition occurred with a 5 mm thick water film and a Reynolds number of *** specific parameters were found to maximize the heat transfer and temperature reduction *** finding is crucial for the development of practical and efficient cooling systems for PV modules,potentially leading to improved performance and longevity of solar *** cooling fluids or advanced cooling techniques that might offer even better efficiency or practical benefits.

关键词： PV module efficiency water film thickness reynolds number CFD analysis PV/T renewable energy

Rock fracture mechanism of buffer blasting with cushion layer at the borehole bottom

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 325-334页

作者： Xinguang Zhu Chenxi Ding Zhe Sui Hong Su Xu Guo School of Civil and Resources engineering University of Science and Technology BeijingBeijing 100083China Key Laboratory for Mechanics in fluid Solid coupling Systems Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of Mechanics and Civil engineering China University of Mining and Technology(Beijing)Beijing 100083China School of Chemical and Blasting engineering Anhui University of Science and TechnologyHuainan 232001China

This study primarily investigates the rock fracture mechanism of bottom cushion layer blasting and explores the effects of the bottom cushion layer on rock *** involves analyses of the evolution patterns of blasting stress,characteristics of crack distribution,and rock fracture features in the ***,blasting model experiments were carried out using the dynamic caustics principle to investigate the influence of bottom cushion layers and initiation methods on the integrity of the bottom rock *** experimental results indicate that the combined use of bottom cushion layers and inverse initiation effectively protects the integrity of the bottom rock ***,the process of stress wave propagation and dynamic crack propagation in rocks was simulated using the continuum-discontinuum element method(CDEM)and the Landau explosion source model,with varying thicknesses of bottom cushion *** numerical simulation results indicate that with increasing cushion thickness,the absorption of energy generated by the explosion becomes more pronounced,resulting in fewer cracks in the bottom rock *** illustrates the positive role of the cushion layer in protecting the integrity of the bottom rock mass.

关键词： bottom cushion layer blasting crack propagation continuum-discontinuum element method dynamic stress intensity factor

维普期刊数据库

Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2019年第4期32卷 517-525页

作者： Peng Liu Zhao-Kuang Chu Yong Yuan Dao-Hong Wang Chuan-Yong Cui Gui-Chen Hou Yi-Zhou Zhou Xiao-Feng Sun Institute of Metal Research Chinese Academy of Sciences School of Materials Science and engineering University of Science and Technology of China Xi'an thermal Power Research Institute co.ltd. Jiangsu Feiyue Pump Group co.ltd.

The effect of heat treatment on the microstructures and mechanical properties of a newly developed austenitic heat resistant steel(named as T8 alloy) for ultra-supercritical applications have been studied. Results show that the main phases in the alloy after solution treatment are γ and primary MX. Subsequent aging treatment causes the precipitation of M_(23)C_6 carbides along the grain boundaries and a small number of nanoscale MX inside the grains. In addition, with increasing the aging temperature and time, the morphology of M_(23)C_6 carbides changes from semi-continuous chain to continuous *** with a commercial HR3C alloy, T8 alloy has comparable tensile strength, but higher stress rupture strength. The dominant cracking mechanism of the alloy during tensile test at room temperature is transgranular, while at high temperature, intergranular cracking becomes the main cracking mode, which may be caused by the precipitation of continuous M_(23)C_6 carbides along the grain boundaries. Typical intergranular cracking is the dominant cracking mode of the alloy at all stress rupture tests.

关键词： Austenitic heat resistant steel Microstructure Mechanical property Fracture mode

维普期刊数据库

Equivalent combined cycle modelling for three-heat-reservoir thermal Brownian heat pump with heat-transfer effect and its optimal performance

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年

作者： Lingen CHEN congzheng QI Yanlin GE Huijun FENG Hubei Provincial Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety Wuhan Institute of Technology Hubei Provincial engineering Technology Research Center of Green Chemical Equipment Wuhan Institute of Technology Institute of thermal Science and Power engineering Wuhan Institute of Technology School of Mechanical & Electrical engineering Wuhan Institute of Technology

Because of the important role of the absorption heat pump in low-grade thermal energy utilization, this paper extends it to micro domain and performs a finite-time thermodynamic modelling for a three-heat-reservoir (THR) thermal Brownian heat pump with heat transfer effect by using an equivalent combined cycle method, which was applied for macro endoreversible THR heat pumps. The working principle and energy transformation rule are studied, and the coefficient of performance (coP) and heating load are derived. With a fixed overall thermal conductance of three heat exchangers, the maximal heating load is determined by optimizing thermal conductance distributions among three heat exchangers and barrier height, and the optimal working temperatures are also obtained. The impact of external heat transfer is elucidated to show the difference between this model and a non-equilibrium thermodynamic one. Results indicate that external heat transfer determines the energy transformation directly, and performance characteristics are closer to reality when external heat transfer is considered. The heating load has a maximal value about thermal conductance allocation ratios. About half the overall heat exchanger inventory needs to be assigned to the heat exchanger of the heating space for maximal heating load. When the cycle is with only heat transfer effect, the net particle numbers are zero, and the cycle fails to pump heat. The research results are expected to offer an idea for thermodynamic optimization and design of micro THR thermal Brownian heat pump devices.

关键词：