检索结果-南通市图书馆

Numerical simulation of the effect of coaxial and cross-axis injection modes on pulverized coal combustion in the raceway of blast furnace tuyere

引用

Particuology 2024年第10期93卷 154-169页

作者： Yunpeng Wang Lei Gao Xiaolei Zhou faculty of metallurgy and Energy engineering Kunming University of Science and TechnologyKunming650093China

The aim of this study is to investigate the influence of the angle of the pulverized coal (PC) injection lance on the combustion characteristics of fuel in the raceway of blast furnace tuyeres. Using FLUENT software, a Euler-Lagrange three-dimensional numerical model was constructed to analyze the influence of different positions of blast furnace tuyere coal powder injection lance (coaxial and cross-axis) on key parameters such as temperature distribution, gas flow, and combustion efficiency. The results demonstrate that adjusting the angle of the injection lance significantly modifies the average and peak temperatures in the raceway, while the composition of gas components remains relatively stable. When the injection lance angle is 10°, the average temperature and peak temperature in the raceway are 2294 K and 2747 K, respectively. When the injection lance angle is 12°, the combustion efficiency of the PC reaches 80.8%. This study reveals the significant impact of the injection lance angle on the combustion process. Especially at an angle of 12°, the combustion efficiency of the blast furnace significantly improves. With coaxial injection, the combustion rate increases as the distance between the injection lance tip and the tuyere increases. This paper is instructive for the optimization of the blast furnace combustion system, which improve fuel utilization efficiency and reduce environmental emissions. This paper provides practical recommendations for adjusting blast furnace operational parameters, offering insights for achieving more efficient and environmentally friendly industrial production.

关键词： Pulverized coal combustion Tuyere raceway Blast furnace CFD simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructures and Properties of Biomedical Mg-Zn-Sn-Zr Rolled Alloys

引用

Journal of Wuhan University of Technology(materials Science) 2024年第3期39卷 766-773页

作者：周生刚 ZHANG Daxin XU Yang DUAN Jihao LI Tao LIU Junfeng WANG Peng 曹勇 faculty of material Science and engineering Kunming University of Science and TechnologyKunming 650093China

The as-cast Mg-2.0Zn-1.5Sn-xZr(x=0,0.4,0.6,0.8,1.0 wt%)alloy was rolled with the pressure less than 5%each *** microstructure,mechanical properties,corrosion properties and biocompatibility of the alloy were *** microstructure of the alloy was observed and analyzed by scanning electron microscope,and the tensile test was carried out by universal tensile *** corrosion resistance of the alloy in Hank's solution was studied by hydrogen evolution experiment and electrochemical test,and the biocompatibility of the alloy was tested by L929 *** results show that Mg-2Zn-1.5Sn-xZr alloy has excellent mechanical *** elongation of Mg-2Zn-1.5Sn-xZr alloy decreases with the increase of Zr content,but the tensile strength first increases and then decreases with the increase of Zr *** the Zr content is 0.8 wt%,the maximum tensile strength of the alloy is 235 *** results of hydrogen evolution experiment and electrochemical analysis show that the corrosion resistance of the alloy is the best when the Zr content is 0.8 wt%,and all the five alloys have high *** conclusion,the rolled alloy has good properties and has broad application prospects in the field of biomaterials.

关键词： magnesium alloy corrosion performance mechanical properties biocompatibility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure design of advanced magnesium-air battery anodes

引用

Journal of Magnesium and Alloys 2024年第2期12卷 443-464页

作者： Xu Huang Qingwei Dai Qing Xiang Na Yang Gaopeng Zhang Ao Shen Wanming Li School of metallurgy and materials engineering Chongqing University of Science and TechnologyChongqing 401331China School of materials and Architectural engineering Guizhou Normal UniversityGuiyang 550025China School of material and metallurgy University of Science and Technology LiaoningAnshan 114051China

Metal-air battery is an environmental friendly energy storage system with unique open ***(Mg)and its alloys have been extensively attempted as anodes for air batteries due to high theoretical energy density,low cost,and ***,the study on Mg-air battery(MAB)is still at the laboratory level currently,mainly owing to the low anodic efficiency caused by the poor corrosion *** order to reduce corrosion losses and achieve optimal utilization efficiency of Mg anode,the design strategies are reviewed from microstructure ***,the corrosion behaviors have been discussed,especially the negative difference effect derived by hydrogen *** attention is given to the effect of anode micro-structures on the MAB,which includes grain size,grain orientation,second phases,crystal structure,twins,and *** further improvement,the discharge performance,long period stacking ordered phase and its enhancing effect are ***,given the current debates over Mg dendrites,the potential risk,the impact on discharge,and the elimination strategies are *** control and single crystal would be promising ways for MAB anode.

关键词： Magnesium Air battery Anode Microstructure Anodic efficiency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： Gürel Cam Ali Günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Applying the Protective Mn-Co-La_(2)O_(3)Coating on Crofer 22 APU Ferritic Stainless Steel Used as Solid Oxide Fuel Cell Interconnects

引用

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 872-888页

作者： Farhad Mohsenifar Hadi Ebrahimifar Ahmad Irannejad Department of materials engineering and metallurgy Faculty of EngineeringShahid Bahonar University of KermanKermanIran Mechanical engineering Department Faculty of EngineeringHigher Education Complex of Bam76615-314BamIran Department of materials engineering Faculty of Mechanical and Materials EngineeringGraduate University of Advanced TechnologyKerman ***Iran

This research studies the effect of Mn-Co-La_(2)O_(3) coating synthesized by the electrodeposition method on the oxidation resistance and electrical conductivity of the Crofer 22 APU stainless steel interconnect plates in solid oxide fuel *** test samples were characterized by a field emission scanning electron microscope(FESEM)equipped with energy dispersive spectroscopy(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The oxidation kinetics of the coated and uncoated samples were studied by tracking their weight changes over time at 800°C,showing that the oxidation mechanism for all samples follows the parabolic *** oxidation rate constant(k_(p))values of the coated sample compared with that of the uncoated one indicated a reduction in the oxidation rate of the steel substrate in the presence of the Mn-Co-La_(2)O_(3) *** examination of the cross-section of different samples after the isothermal oxidation for 500 h at 800°C exhibited that applying the composite coating leads to a decrease in the thickness of the chromia layer formed on the steel ***,under these conditions,the area-specific resistance(ASR)of the coated sample(13.11 mΩcm^(2))is significantly lower than that of the uncoated one(41.45 mΩcm^(2)).

关键词： Area specific resistance Oxidation Fuel cell Composite coating

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Reinforcing oxygen electrocatalytic activity via selective dualphase heterointerface engineering for rechargeable Zn-air batteries

引用

Rare Metals 2024年第4期43卷 1524-1536页

作者： Chao Cheng Chuang Zhi Zhong-Ti Sun Yong-Qiang Ming Ting-Ting Xiang Qing-Chao Zhu Zi-Rui Wu Bing Li Yi Li Cheng Jin Yong Cao Juan Yang School of materials Science and engineering Jiangsu UniversityZhenjiang212013China faculty of material Science and engineering Kunming University of Science and TechnologyKunming650093China

Dual-phase heterointerface electrocatalysts(DPHE)constructed by oxygen reduction reaction(ORR)-and oxygen evolution reaction(OER)-active elements exhibit excellent bifunctional activity and long-term durability due to the abundant interface exposure and synergistic catalytic ***,low-dimensional N-doped graphene nanoribbons(N-GNRs)coupling with ultrathin CoO nanocomposites(N-GNRs/CoO)were controllably fabricated through a facile two-step approach using synthesized Co(OH)_2 nanosheet as CoO *** functional theory(DFT)calculations and experimental characterizations prove that the formation of interface between N-GNRs and CoO can induce local charge redistribution,contributing to the improvement of catalytic activity and *** optimal N-GNRs/CoO DPHE possesses hierarchically porous architectures and presents outstanding bifunctional activities with a small potential gap of 0.729 V between the potential at 10 mA·cm^(-2)for OER and the halfwave potential for ORR,which outperforms Pt/C+IrO_(2)and the majority of noble-metal-free bifunctional ***-and solid-state rechargeable Zn-air batteries assembled with N-GNRs/CoO as the cathode also display high peak power density and fantastic cycle stability,superior to that of benchmark Pt/C+IrO_(2)*** is anticipated to offer significant benefits toward high activity,stability and mechanical flexibility bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries.

关键词： Interface engineering Graphene nanoribbons CoO Bifunctional electrocatalyst Zn-air batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Critical layer in liquid-solid system influencing the remediation of chromium using zeolite-supported sulfide nano zero-valent iron

引用

Journal of Environmental Sciences 2024年第1期135卷 232-241页

作者： Chundi Zhou Caiyun Han Nengsheng Liu faculty of material and Environment Guangxi University for NationalitiesNanning 530008China College of Environmental Science and engineering Tongji UniversityShanghai 200092China faculty of Metallurgical and Energy engineering Kunming University of Science and TechnologyKunming 650093China

Sulfidated nano zero-valent iron particles were immobilized on ZSM-5 zeolite(Z/S-nZⅥ)and used for hexavalent chromium(Cr(Ⅵ))*** performance of Z/S-nZⅥimproved with the increase in Cr(Ⅵ)concentration(0.6).Moreover,the removal mechanisms of Cr(Ⅵ)were elucidated through XRD,transmission electron microscopy(TEM)and XPS *** results demonstrate that the species of chromium in the critical layer changed from Cr(Ⅲ)to Cr(Ⅵ)as the concentration of chromium increased from low to ***,the critical layer was composed of Cr(Ⅵ),Fe(Ⅱ),O and H ***,the experiments of coexisting ions and aging time confirmed that Z/S-nZⅥpossessed high selectivity and stability to ensure efficiency and cost-effectiveness in practical applications.

关键词： Cr(VI) Corrosion Critical layer Selectivity Stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Luminescence and magnetic properties of bifunctional nanoparticles composited by nitrogen-doped graphene quantum dots and gadolinium

引用

Journal of Rare Earths 2024年第4期42卷 716-723页

作者： Wanli Zhang Hao Zhou Meigui Ou Donghao Sun Chunlin Yang College of materials and metallurgy University of GuizhouGuiyang550025China National Local Co-construction engineering Laboratory for High Performance Metal Structure material and Manufacture Technology Guiyang550025 China College of Chemistry and materials engineering Guiyang UniversityGuiyang550003China

In this paper,nitrogen-doped graphene quantum dots(N-GQDs)were combined with gadolinium ions(Gd^(3+))by a surface modification to obtain magneto-optical dual-functional N-GQDs/Gd^(3+)*** morphology of obtained composite was characterized by field emission scanning electron microscopy and transmission electron *** and magnetic properties were measured by a fluorescence spectrophotometer and a vibrating sample magnetometer,*** indicate that well-dispersed spherical N-GQDs/Gd^(3+)nanoparticles have an average diameter of 7 nm.N-doping significantly increases the luminesce nce of particles with an optimal luminescence intensity at 20℃and pH=9.X-ray photoelectron spectroscopy results indicate that the N-doping introduces pyrrolic N as an electron donor,enhancing fluorescence by increasing the surface electron cloud density of *** addition,density functional theory calculation results reveal that N-doping reduces the band gap of NGQDs/Gd^(3+),enabling electronic transitions to higher energy levels and generating more activation sites,thereby enhancing *** to N-GQDs/Gd^(3+)prepared at 20℃,the saturated magnetization of particles prepared at 40℃is 0.85 emu/g,indicating a better magnetic *** above results suggest that bifunctional nanomaterials N-GQDs/Gd^(3+)with excellent optical properties and magnetism can be better used for fluorescence and magnetic resonance imaging.

关键词： Nitrogen-doped graphenequantum dots Gadolinium Luminescence Magnetism Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High thermally stable deep red-emitting Sb3+,Ho3+-codoped Cs2NaScCl6 double perovskite for plant lighting

引用

Journal of Rare Earths 2024年第11期42卷 2043-2050页

作者： Houjiang You Gaoxuanyu Guan Tianchun Lang Mingsheng Cai Peng Su Huichao He Yang Zhong Tao Han School of metallurgy and materials engineering Chongqing University of Science and Technology School of material Science and engineering Chongqing University of Technology Chongqing Key Laboratory of materials Surface & Interface Science Chongqing University of Arts and Sciences Offshore Oil engineering Co. Ltd.

Lead-free halide double perovskite has received widespread attention due to its excellent optical ***,the lack of deep red light and poor heat quenching resistance severely limit its application in plant lighting *** this work,Ho3+was introduced into the thermally stable Cs2NaScCl6host,exhibiting a deep red emission of 660 *** constructing an energy transfer channel between Sb3+and Ho3+,the photo luminescence quantum yield（PLQY） of Cs2NaScCl6:1%Sb3+,40%Ho3+rises up to53.8%,that is increased by 17 times,and its emission intensity can still be maintained by 80% at 423 K,exhibiting good heat quenching *** obtained Cs2NaScCl6:1%Sb3+,40%Ho3+and Cs2NaScCl6:1%Sb3+with blue light emission were employed for fabricating a light-emitting diode（LED） device with a340 nm UV chip,and its emission spectrum matches well the absorption spectra of chlorophyll A and chlorophyll B with the high resemblance of 70% and 75%,making it suitable for use as an artificial light source to control the growth process of plants in the field of plant lighting.

关键词： Energy transfer Lead-free halide double perovskite Plant lighting Rare earths Thermally stable

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Advanced rare earth tantalate RETaO_(4)(RE=Dy,Gd and Sm) with excellent oxygen/thermal barrier performance

引用

Journal of Rare Earths 2024年第8期42卷 1595-1603,I0007页

作者： Jun Wang Jianyu Li Chunyu Jiang Jianbo Song Xing Yang Xiaolong Ma Kailiang Luo Peng Wu Xiaoyu Chong Jing Feng faculty of material Science and engineering Kunming University of Science and TechnologyKunming650093China Shanxi Tianxuan Coating Technology Co. LtdXi'an710000China

Thermal barrier coatings(TBCs) materials with lowered the rmal and oxygen ion conductivity can provide thermal and oxidative protection for high te mperature hot-end components in aero nautical engines and gas turbines,The rare-earth tantalate RETaO_(4)(RE=Dy,Gd and Sm) ceramics with monoclinic(m) phase were successfully synthesized via spark plasma *** vacancies responsible for the thermal and oxygen ion conductivities of RETaO_(4) were demonstrated by atomic-resolution energy dispersive Xray and X-ray photoelectron *** the three samples,DyTaO_(4) has excellent oxygen/thermal barrier *** to the current service thermal barrier coating material ZrO_(2)-8 wt% Y_(2)O_(3)(8 YSZ),DyTaO_(4) has an ultra-low oxygen ion conductivity benefiting from low oxygen vacancy concentration and strong stretching force *** intrinsic thermal conductivity of DyTaO_(4)is 68.2% less than that of 8 ***,the thermal expansion rate curves indicate that the phase transformation does not happen from room te mperature to 1200℃.The above results demonstrate that high-growth rate the rmally grown oxide can be retarded by creating dense DyTaO_(4) coating with lowered thermal and oxygen ion conductivity.

关键词： Thermal barrier coatings Rare earths Oxygen vacancies Thermal conductivity Oxygen ion conductivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：