检索结果-南通市图书馆

Journal of Materials Science & Technology 2009年第5期25卷 597-602页

作者： H.Keshmiri A.Momeni K.Dehghani G.R.Ebrahimi G.Heidari esfarayen steel complex Department of Mining and Metallurgy Amir Kabir University of Technology Tarbiat Moalem University of Sabzevar

Duplex stainless steels （DSS） with ferritic-austenitic microstructures offer good combination of resistance to pitting corrosion and high strength that are not concomitantly attainable using conventional single phase austenitic or ferritic stainless steels, The DSS used in this investigation was 2205 alloy having a stable microstructure consisting of about 45% ferrite and 55% austenite at ambient temperature. In order to investigate aging behavior of this steel and the influences on mechanical properties, different aging treatments were conducted at temperatures of 350-950℃ for various aging time of 15, 30, 60 and 180 min. The aged specimens were subjected to impact testing and hardness measurements. Finally, the changes in microstructure due to aging were studied by optical and scanning electron microscopy. The results showed that aging at temperatures lower than 550℃ for different time had negligible effects on mechanical properties. Besides, no considerable changes in term of precipitation of harmful intermetallic particles were observed in microstructure below this temperature. However, a critical temperature range, 550-650 ℃, was introduced here. Aging in this range led to a significant decrease in toughness and notable increase in hardness. The formation of intermetallic phases such as CT was recognized as the major reason for the observed changes.

关键词： Duplex stainless steel Aging Toughness Sigma phase

Influence of Mould and Insulation Design on Soundness of Tool steel Ingot by Numerical Simulation

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and steel Research International 2013年第7期20卷 78-83页

作者： M Heidarzadeh H Keshmiri esfarayen Industrial complex (EICO) Esfarayen *** North Khorasan Iran

The solidification of 4.4 t cold work tool steel ingot type X210Crl2 was simulated by Magma software. By the reduction of ingot height, solidification modeling and pouring of a new 3 t ingot were performed and decreasing the porosity formation potential in 3 t ingot in comparison with 4.4 t ingot on the basis of Niyama criterion was ob-served which was in good accordance with experimental data. In order to produce sound ingot, a new 2.8 t ingot mould was designed which includes some parameteric changes in mould such as mould slope, slenderness ratio, mould concavity radius, fillet radius of mould internal corners and feeding diameter to ingot upper diameter ratio. Furthermore, the effects of insulating between kokil and feeding ring and also insulating the outer surface of feeding ring as well as insulating the outer surface of one third of kokil upper part on eenterline porosity formation were in-vestigated in both 2.8 and 4.4 t ingots. The results show that the ingot which was produced in new designed 2.8 t mould has a better Niyama pattern and the centerline porosities were eliminated.

关键词： numerical modeling steel ingot mould parameter porosity

Development in oxide metallurgy for improving the weldability of high -strength low-alloy steel-Combined deoxidizers and microalloying elements

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1263-1284页

作者： Tingting Li Jian Yang State Key Laboratory of Advanced Special steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The mechanisms of oxide metallurgy include inducing the formation of intragranular acicular ferrite(IAF)using micron-sized inclusions and restricting the growth of prior austenite grains(PAGs)by nanosized particles during *** chaotically oriented IAF and refined PAGs inhibit crack initiation and propagation in the steel,resulting in high impact *** work summarizes the com-bined effect of deoxidizers and alloying elements,with the aim to provide a new perspective for the research and practice related to im-proving the impact toughness of the heat affected zone(HAZ)during the high heat input *** complex deoxidation with other strong deoxidants,such as Mg,Ca,Zr,and rare earth metals(REMs),can improve the toughness of the heat-affected zone(HAZ)by re-fining PAGs or increasing IAF ***,it is difficult to identify the specific phase responsible for IAF nucleation because ef-fective inclusions formed by complex deoxidation are usually *** alloying elements,such as C,Si,Al,Nb,or Cr,con-tents can impair HAZ toughness.A high C content typically increases the number of coarse carbides and decreases the potency of IAF ***,Cr,or Al addition leads to the formation of undesirable *** reduces the high-temperature stability of the ***,V,and B can enhance HAZ ***-containing precipitates present good thermal *** or V(C,N)is ef-fective in promoting IAF nucleation due to its good coherent crystallographic relationship with *** formation of the B-depleted zone around the inclusion promotes IAF *** interactions between alloying elements are complex,and the effect of adding dif-ferent alloying elements remains to be *** the future,the interactions between various alloying elements and their effects on ox-ide metallurgy,as well as the calculation of the nucleation effects of effective inclusions using first principles calculations will become the focus of

关键词： oxide metallurgy technology heat affected zone high-strength low-alloy steel intragranular acicular ferrite microalloying element

Characteristics and stability of oxide+carbonitride in H13 steel at 1250℃

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and steel Research International 2024年第1期31卷 134-142页

作者： Xiao-lin Sun Han-jie Guo Jing Guo Fei Wang Dong Xu Gao-yang Song Shuai Wang School of Materials Science and Engineering Hebei University of EngineeringHandan056038HebeiChina School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China High Temperature Materials Research Institute Central Iron and Steel Research Institute Co.Ltd.Beijing100081China Technology Innovation Center for High Quality Cold Heading steel of Hebei Province Hebei University of EngineeringHandan056038HebeiChina

The morphology,size,quantity,and composition of complex oxide+carbonitride in H13 steel held at 1250℃for 5,10,and 15 h were *** results show that the ratio and number of complex carbonitrides with cores in H13 steel are gradually increased when holding at 1250℃compared with those in the original H13 steel,and the core size *** are one or more oxide cores in(Ti_(x),V_(1-x))(Cy,N_(1-y)),including xCaO·zAl_(2)O_(3),xCaO·yMgO·zAl_(2)O_(3),and CaO after holding at 1250℃,in addition to MgO·Al_(2)O_(3)and Al_(2)O_(3)in the original *** equilibrium temperature for(Ti_(x),V_(1-x))(Cy,N_(1-y))precipitation at the solidification front and decomposition in the solid state was theoretically analyzed,which was affected by the x value and the product of Ti and N contents in H13 ***,the composition of(Ti_(x),V_(1-x))(Cy,N_(1-y))is influenced by the oxide *** is convinced that(Ti_(x),V_(1-x))(Cy,N_(1-y))with oxide cores has a higher stability,especially for oxides with a high Al_(2)O_(3)*** treatment at high temperature facilitates a more reasonable analysis of oxide+carbonitride,and the generation mechanism of oxide+carbonitride was discussed.

关键词： complex carbonitride Decomposition Oxide core Characteristic Stability

Unveiling the cellular microstructure–property relations in martensitic stainless steel via laser powder bed fusion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第11期 2476-2487页

作者： Lingzhi Wu Cong Zhang Dil Faraz Khan Ruijie Zhang Yongwei Wang Xue Jiang Haiqing Yin Xuanhui Qu Geng Liu Jie Su Collaborative Innovation Center of steel Technology University of Science and Technology Beijing Department of Physics University of Science and Technology Bannu Beijing Key Laboratory of Materials Genome Engineering University of Science and Technology Beijing Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology Beijing Institute for Advanced Materials and Technology University of Science and Technology Beijing Institute for Special steel Research Central Iron and Steel Research Institute

Laser powder bed fusion(LPBF) is a widely recognized additive manufacturing technology that can fabricate complex components rapidly through layer-by-layer formation. However, there is a paucity of research on the effect of laser scanning speed on the cellular microstructure and mechanical properties of martensitic stainless steel. This study systematically investigated the influence of laser scanning speed on the cellular microstructure and mechanical properties of a developed Fe11Cr8Ni5Co3Mo martensitic stainless steel produced by LPBF. The results show that increasing the laser scanning speed from 400 to 1000 mm/s does not lead to a noticeable change in the phase fraction, but it reduces the average size of the cellular microstructure from 0.60 to 0.35 μm. The scanning speeds of 400 and1000 mm/s both had adverse effects on performances of sample, resulting in inadequate fusion and keyhole defects respectively. The optimal scanning speed for fabricating samples was determined to be 800 mm/s, which obtained the highest room temperature tensile strength and elongation, with the ultimate tensile strength measured at(1088.3 ± 2.0) MPa and the elongation of(16.76 ± 0.10)%. Furthermore, the mechanism of the evolution of surface morphology, defects, and energy input were clarified, and the relationship between cellular microstructure size and mechanical properties was also established.

关键词：

Applying the Protective Mn-Co-La_(2)O_(3)Coating on Crofer 22 APU Ferritic Stainless steel Used as Solid Oxide Fuel Cell Interconnects

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 872-888页

作者： Farhad Mohsenifar Hadi Ebrahimifar Ahmad Irannejad Department of Materials Engineering and Metallurgy Faculty of EngineeringShahid Bahonar University of KermanKermanIran Mechanical Engineering Department Faculty of EngineeringHigher Education Complex of Bam76615-314BamIran Department of Materials Engineering Faculty of Mechanical and Materials EngineeringGraduate University of Advanced TechnologyKerman ***Iran

This research studies the effect of Mn-Co-La_(2)O_(3) coating synthesized by the electrodeposition method on the oxidation resistance and electrical conductivity of the Crofer 22 APU stainless steel interconnect plates in solid oxide fuel *** test samples were characterized by a field emission scanning electron microscope(FESEM)equipped with energy dispersive spectroscopy(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The oxidation kinetics of the coated and uncoated samples were studied by tracking their weight changes over time at 800°C,showing that the oxidation mechanism for all samples follows the parabolic *** oxidation rate constant(k_(p))values of the coated sample compared with that of the uncoated one indicated a reduction in the oxidation rate of the steel substrate in the presence of the Mn-Co-La_(2)O_(3) *** examination of the cross-section of different samples after the isothermal oxidation for 500 h at 800°C exhibited that applying the composite coating leads to a decrease in the thickness of the chromia layer formed on the steel ***,under these conditions,the area-specific resistance(ASR)of the coated sample(13.11 mΩcm^(2))is significantly lower than that of the uncoated one(41.45 mΩcm^(2)).

关键词： Area specific resistance Oxidation Fuel cell Composite coating

Suppression of multistep phase transitions of O3-type cathode for sodium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第5期35卷 453-458页

作者： Shengyu Zhao Qinhao Shi Wuliang Feng Yang Liu Xinxin Yang Xingli Zou Xionggang Lu Yufeng Zhao Institute for Sustainable Energy&College of Sciences Shanghai UniversityShanghai 200444China State Key Laboratory of Advanced Special steel&Shanghai Key Laboratory of Advanced Ferrometallurgy&School of Materials Science and Engineering Shanghai UniversityShanghai 200444China

O3-type layered oxide cathodes have been widely investigated due to their high reversible capacities and sufficient Na+***,such materials usually suffer from complex multistep phase transitions along with drastic volume changes,leading to the unsatisfied cycle ***,we report a Mg/Ti co-doped O3-type NaNi_(0.5)Mn_(0.5)O_(2),which can effectively suppress the complex multistep phase transition and realize a solid-solution reaction within a wide voltage *** is confirmed that,the Mg/Ti co-doping is beneficial to enhance the structural stability and integrity by absorbing micro-strain and ***,the as obtained sample delivers an outstanding cyclic performance(82.3%after 200 cycles at 1 C)in the voltage range of 2.0-4.0 V,and a high discharge capacity of 86.6 mAh/g after 100 cycles within the wide voltage range(2.0-4.5 V),which outperform the existing *** co-doping strategy offers new insights into high performance O3-type cathode for sodium ion batteries.

关键词： Sodium ion batteries Mg/Ti co-doping Phase transition Cyclic performance High voltage performance

Recent progress in visualization and digitization of coherent transformation structures and application in high-strength steel

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1298-1310页

作者： Xuelin Wang Zhenjia Xie Xiucheng Li Chengjia Shang Collaborative Innovation Center of steel Technology University of Science and Technology BeijingBeijing 100083China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China Yangjiang Branch Guangdong Laboratory for Materials Science and Technology(Yangjiang Advanced Alloys Laboratory)Yangjiang 529500China

High-strength steels are mainly composed of medium-or low-temperature microstructures,such as bainite or martensite,with coherent transformation *** type of microstructure has a high density of dislocations and fine crystallographic structural units,which ease the coordinated matching of high strength,toughness,and ***,given its excellent welding perform-ance,high-strength steel has been widely used in major engineering constructions,such as pipelines,ships,and ***,visual-ization and digitization of the effective units of these coherent transformation structures using traditional methods(optical microscopy and scanning electron microscopy)is difficult due to their complex ***,the establishment of quantitative relationships with macroscopic mechanical properties and key process parameters presents additional *** article reviews the latest progress in microstructural visualization and digitization of high-strength steel,with a focus on the application of crystallographic methods in the development of high-strength steel plates and *** obtained the crystallographic data(Euler angle)of the transformed microstruc-tures through electron back-scattering diffraction and combined them with the calculation of inverse transformation from bainite or martensite to austenite to determine the reconstruction of high-temperature parent austenite and orientation relationship(OR)during con-tinuous cooling ***,visualization of crystallographic packets,blocks,and variants based on actual OR and digit-ization of various grain boundaries can be effectively completed to establish quantitative relationships with alloy composition and key process parameters,thereby providing reverse design guidance for the development of high-strength steel.

关键词： high-strength steel microstructure visualization digitization quantification mechanical properties

Microstructure recognition of steels by machine learning based on visual attention mechanism

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and steel Research International 2024年第4期31卷 909-923页

作者： Xing-yu Chen Lin Cheng Cheng-yang Hu Yu-peng Zhang Kai-ming Wu The State Key Laboratory of Refractories and Metallurgy Hubei Province Key Laboratory of Systems Science on Metallurgical ProcessingInternational Research Institute for Steel TechnologyCollaborative Center on Advanced SteelsWuhan University of Science and TechnologyWuhan 430081HubeiChina Metals Valley and Band(Foshan)Metallic Composite Materials Co. Ltd.Foshan 528000GuangdongChina

U-Net has achieved good performance with the small-scale datasets through skip connections to merge the features of the low-level layers and high-level layers and has been widely utilized in biomedical image segmentation as well as recent microstructure image segregation of the *** representative visual attention mechanism modules,named as squeeze-and-excitation networks,convolutional block attention module,and extended calibration algorithm,were intro-duced into the traditional U-Net architecture to further improve the prediction *** is found that compared with the original U-Net architecture,the evaluation index of the improved U-Net architecture has been significantly improved for the microstructure segmentation of the steels with the ferrite/martensite composite microstructure and pearlite/ferrite composite microstructure and the complex martensite/austenite island/bainite microstructure,which demonstrates the advantages of the utilization of the visual attention mechanism in the microstructure *** reasons for the accuracy improvement were discussed based on the feature maps analysis.

关键词： Microstructure recognition-steel Machine learning Visual attention mechanism Visualization

Design and Application of Intelligent Control System for Molten Iron Transportation Based on 5G Technology

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Metallurgical Industry

Frontiers of Metallurgical Industry 2024年第2期2卷 21-24页

作者： Borui Wang Logistics branch of Baosteel group Xinjiang Bayi Iron&steel Co. Ltd.

Molten transport is an important link in the iron and steel enterprise production,involves many complex factors,artificial management is ***,puts forward a kind of molten iron transport wisdom control system based on 5G technology,which mainly contains the intelligent identification tracking system,equipment status collection information acquisition system,locomotive vehicle terminal system,*** with the analysis of the actual application situation,the system could integrate all the processes and elements of molten iron produc-tion and transportation,realize the integration of operation and management,and also promote the improvement of the turnover efficiency of molten iron tank,reduce the demand for personnel,and reduce the labor cost.

关键词： 5G technology molten iron transportation intelligent control system