检索结果-南通市图书馆

Low-temperature NH_(3) abatement via selective oxidation over a supported copper catalyst with high Cu^(+) abundance

引用

Journal of Environmental Sciences 2024年第9期143卷 12-22页

作者： Zhiming Yang Lin Peng Leneng Yang Mingli Fu Daiqi Ye Peirong Chen Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control National Engineering Laboratory for VOCs Pollution Control Technology and EquipmentSchool of Environment and EnergySouth China University of TechnologyGuangzhou 510006China Guangdong Chengyi Environmental Technology Corp. Shaoguan 512158China

Selective catalytic NH_(3)-to-N_(2) oxidation(NH_(3)-SCO)is highly promising for abating NH_(3) emissions slipped from stationary flue gas after-treatment *** practical application,however,is limited by the non-availability of low-cost catalysts with high activity and N_(2) ***,using defect-rich nitrogen-doped carbon nanotubes(NCNT-AW)as the support,we developed a highly active and durable copper-based NH_(3)-SCO catalyst with a high abundance of cuprous(Cu^(+))*** obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T_(50)(*** temperature to reach 50% NH_(3) conversion)of 174℃ in the NH_(3)-SCO reaction,which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs(OCNTs)or NCNT with less surface defects,but also those most active Cu catalysts in open *** kinetics measurements and temperature-programmed surface reactions using NH_(3)as a probe molecule revealed that the NH_(3)-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction(i-SCR)route involving nitric oxide(NO)as a key *** to mechanistic investigations by X-ray photoelectron spectroscopy,Raman spectroscopy,and X-ray absorption spectroscopy,the superior NH_(3)-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and ***,surface defects promoted the anchoring of Cu O nanoparticles on N-containing sites and,thereby,enabled efficient electron transfer from N to Cu O,increasing significantly the fraction of SCR-active Cu^(+)sites in the *** study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu^(+)-rich Cu catalysts for efficient abatement of slip NH_(3)emissions via selective oxidation.

关键词： NH_(3)-SCO XANES Localized etching N-doping N_(2) selectivity i-SCR

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhanced Electrochemical Properties and Optimized Li+ Transmission Pathways of PEO/LLZTO-Based Composite Electrolytes Modified by Supramolecular Combination

引用

energy & Environmental Materials 2024年第1期7卷 242-250页

作者： Zhengyi Lu Lin Peng Yi Rong Enli Wang Ruhua Shi Hongxun Yang Yadong Xu Ruizhi Yang Chao Jin College of energy Soochow Institute for Energy and Materials InnovationsSoochow University Jiangsu Runchao energy Storage Technology Co. Ltd

Poly（ethylene oxide）(PEO) and Li6.75La3Zr1.75Ta0.25O12（LLZTO）-based composite polymer electrolytes（CPEs） are considered one of the most promising solid electrolyte ***,agglomeration of LLZTO within PEO and lack ... 详细信息

关键词： conductivity interfacial stability LLZTO fillers modification PEO matrix

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dynamic Modeling of Key Operating Parameters for Supercritical Circulating Fluidized Bed Units based on Data-Knowledge-Driven Method

引用

Journal of Thermal Science 2024年第3期33卷 1216-1230页

作者： YU Haoyang GAO Mingming ZHANG Hongfu CHEN Jiyu LIU Jizhen YUE Guangxi The State Key Laboratory of Alternate Electrical Power System with Renewable energy Sources School of Control and Computer EngineeringNorth China Electric Power UniversityBeijing102206China CHN energy New energy Technology Research Institute Co. Ltd.Beijing102209China department of energy and Power Engineering Tsinghua UniversityBeijing100084China

To address the pressing need for intelligent and efficient control of circulating fluidized bed(CFB)units,it is crucial to develop a dynamic model for the key operating parameters of supercritical circulating fluidized bed(SCFB)***,data-knowledge-driven dynamic model of bed temperature,load,and main steam pressure of the SCFB unit has been ***,a knowledge-driven method is employed to develop a dynamic model for key operating parameters of SCFB *** model parameters are determined based on the operating data of the unit and continuously optimized in real ***,Bidirectional Long Short-Term Memory combined with Convolutional Neural Network and Attention Mechanism is utilized to build the dynamic model of bed temperature,load,and main steam ***,a collaboration and integration method based on the critic weight method and the variation coefficient method is proposed to establish data-knowledge-driven model of key operating parameters for SCFB *** model displays great accuracy and fitting ability compared with other methods and effectively captures the dynamic characteristics,which can provide a research basis for the design of intelligent flexible control mode of SCFB unit.

关键词： circulating fluidized bed dynamic model data-knowledge-driven method deep learning power plant

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

引用

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 703-712页

作者： Yan-Hui Wang Hua-Qiang Sun Wen-Jing Feng Lei-Jie Zhao Xiang Chen Qing-An Chen Hai-Tao Sun Jian-Jun Wang Zhi-Nan Yang Key Laboratory of Intelligent Industrial equipment Technology of Hebei Province School of Mechanical and Equipment EngineeringHebei University of EngineeringHandan056038China Collaborative Innovation Center for Modern equipment Manufacturing of Jinan New Area Hebei University of EngineeringHandan056038China School of Materials Science and Engineering Tsinghua UniversityBeijing100084China Avic Shang da Superalloys Company Limited Xingtai054800China National Engineering Research Center for equipment and Technology of Cold Strip Rolling Yanshan UniversityQinhuangdao066004China

In this study, a high-carbon nano-bainitic GCr15Si1Mo bearing steel was investigated. Specifically, the effects of content and size of undissolved carbides on the microstructure and transformation kinetics of nano-bainite were analyzed. The results demonstrated that after prolonged austempering at low temperatures, the mixed microstructure composed of nano-bainite (NB), undissolved carbides (UC), and retained austenite (RA) was obtained in GCr15SiMo steel. When the experimental steel was austenitized at 900 ℃, the undissolved carbides gradually dissolved until reaching a stable state with increasing holding time. Furthermore, at the same austempering temperature, despite different volume fractions of undissolved carbides in the substrate, the volume fractions of nano-bainite in the final microstructures remained essentially the same. Moreover, the higher the content of undissolved carbides in steel, the faster the transformation rate of nano-bainite and the shorter the total transformation time.

关键词： Nano-bainite Undissolved carbides Bainitic transformation kinetics Carbon concentration

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Impact of a Magnetic Dipole on Heat Transfer in Non-Conducting Magnetic Fluid Flow over a Stretching Cylinder

引用

Fluid Dynamics & Materials Processing 2024年第3期20卷 475-486页

作者： Anupam Bhandari department of Mathematics School of EngineeringUniversity of Petroleum&Energy Studies(UPES)Energy Acres BuildingBidholi DehradunUttarakhand248007India

The thermal behavior of an electrically non-conducting magnetic liquid flowing over a stretching cylinder under the influence of a magnetic dipole is *** governing nonlinear differential equations are solved numerically using a finite element approach,which is properly validated through comparison with earlier results available in the *** results for the velocity and temperature fields are provided for different values of the Reynolds number,ferromagnetic response number,Prandtl number,and viscous dissipation *** influence of some physical parameters on skin friction and heat transfer on the walls of the cylinder is also *** applicability of this research to heat control in electronic devices is discussed to a certain extent.

关键词： Ferrofluid stretching cylinder finite element method heat transfer magnetic dipole

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Securing offshore resources development: A mathematical investigation into gas leakage in long-distance flexible pipes

引用

Petroleum Science 2024年第4期21卷 2734-2744页

作者： Xiang-An Lu Liang-Liang Jiang Jian-Sheng Zhang Min-Gui Wang Guangling College of Yangzhou University department of Chemical and Petroleum Engineering University of Calgary department of energy and Power Engineering Tsinghua University

Gas flexible pipes are critical multi-layered equipment for offshore oil and gas development. Under high pressure conditions, small molecular components of natural gas dissolve into the polymer inner liner of the flexible pipes and further diffuse into the annular space, incurring annular pressure build-up and/or production of acidic environment, which poses serious challenges to the structure and integrity of the flexible pipes. Gas permeation in pipes is a complex phenomenon governed by various factors such as internal pressure and temperature, annular structure, external temperature. In a long-distance gas flexible pipe, moreover, gas permeation exhibits non-uniform features, and the gas permeated into the annular space flows along the metal gap. To assess the complex gas transport behavior in long-distance gas flexible pipes, a mathematical model is established in this paper considering the multiphase flow phenomena inside the flexible pipes, the diffusion of gas in the inner liner, and the gas seepage in the annular space under varying permeable properties of the annulus. In addition, the effect of a variable temperature is accounted. A numerical calculation method is accordingly constructed to solve the coupling mathematical equations. The annular permeability was shown to significantly influence the distribution of annular pressure. As permeability increases, the annular pressure tends to become more uniform, and the annular pressure at the wellhead rises more rapidly. After annular pressure relief followed by shut-in, the pressure increase follows a convex function. By simulating the pressure recovery pattern after pressure relief and comparing it with test results, we deduce that the annular permeability lies between 123 and 512 m D. The results help shed light upon assessing the annular pressure in long distance gas flexible pipes and thus ensure the security of gas transport in the emerging development of offshore resources.

关键词： Offshore resources development Transport security Long-distance flexible pipes Gas leakage Heat and mass transfer model Finite difference calculation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Stabilizing perovskite precursors with the reductive natural amino acid for printable mesoscopic perovskite solar cells

引用

Journal of energy Chemistry 2024年第3期90卷 32-39,I0003页

作者： Wenjing Hu Jian Yang Chuang Yang Xufeng Xiao Chaoyang Wang Zhaozhen Cui Qiaojiao Gao Jianhang Qi Minghao Xia Yaqiong Su Anyi Mei Hongwei Han Michael Gratzel Center for Mesoscopic Solar Cells Wuhan National Laboratory for OptoelectronicsKey Laboratory of Materials Chemistry for Energy Conversion and Storage of Ministry of Education Huazhong University of Science and TechnologyWuhan 430074HubeiChina School of Chemistry Xi'an Key Laboratory of Sustainable Energy Materials ChemistryState Key Laboratory of Electrical Insulation and Power EquipmentXi'an Jiaotong UniversityXi'an 710049ShaanxiChina

Solution processability significantly advances the development of highly-efficient perovskite solar ***,the precursor solution tends to undergo irreversible degradation reactions,impairing the device performance and ***,we utilize a reductive natural amino acid,Nacetylcysteine(NALC),to stabilize the precursor solution for printable carbon-based hole-conductorfree mesoscopic perovskite solar *** find that I_(2) can be generated in the aged solution containing methylammonium iodide(MI) in an inert atmosphere and speed up the MA-FA^(+)(formamidinium) reaction which produces large-size cations and hinders the formation of perovskite *** effectively stabilizes the precursor via its sulfhydryl group which reduces I_(2) back to I^(-)and provides H^(+).The NALC-stabilized precursor which is aged for 1440 h leads to devices with a power conversion efficiency equivalent to 98% of that for devices prepared with the fresh ***,NALC improves the device power conversion efficiency from 16.16% to 18.41% along with enhanced stability under atmospheric conditions by modifying grain boundaries in perovskite films and reducing associated defects.

关键词： Perovskite solar cells Perovskite precursor Degradation Stabilization Reductive natural amino acid

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stable, efficient inverted perovskite solar cells enabled by the multifunctional ytterbium oxide buffer

引用

Science China Chemistry 2024年第8期67卷 2423-2424页

作者： Manman Hu Sang Il Seok department of energy and Chemical Engineering Ulsan National Institute of Science and TechnologyUlsan 44919Republic of Korea

Significant advancements in single-junction inverted perovskite solar cells (PSCs) have led to power conversion efficiencies (PCEs) exceeding 25% [1]. However, their operational stability under strict conditions falls short compared with commercial solar panels, primarily due to the ion migration. This migration alters the chemical composition within the perovskite layer, increasing the heterogeneity and forming degradation sites [2]. Additionally, ion accumulation at metal interfaces corrodes electrodes, while metal diffusion into perovskite layers further compromises the stability, highlighting critical areas for the improvement in long-term device performance [3,4].

关键词： perovskite exceeding stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dielectric nanocomposites with superb high-temperature capacitive performance based on high intrinsic dielectric constant polymer

引用

Nano Research 2024年第9期17卷 8504-8512页

作者： Ding Ai Yuan Chang Haoliang Liu Chenglong Wu Yao Zhou Yuting Han Hao Yu Bing Xiao Yonghong Cheng Guanglei Wu Zirui Jia State Key Laboratory of Electrical Insulation and Power equipment School of Electrical EngineeringXi’an Jiaotong UniversityXi’an 710049China Institute of Materials for energy and Environment State Key Laboratory of Bio-Fibers and Eco-TextilesCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071China

Advancements in power electronics necessitate dielectric polymer films capable of operating at high temperatures and possessing high energy *** significant strides have been achieved by integrating inorganic fillers into high-temperature polymer matrices,the inherently low dielectric constants of these matrices have tempered the magnitude of *** this work,we report an innovative nanocomposite based on sulfonylated polyimide(SPI),distinguished by the incorporation of sulfonyl groups within the SPI backbone and the inclusion of wide bandgap hafnium dioxide(HfO_(2))*** nanocomposite has demonstrated notable enhancements in thermal stability,dielectric properties,and capacitive performance at elevated *** simulations at both molecular and mesoscopic levels have elucidated the mechanisms behind these improvements,which could be attributed to confined segmental motion,an optimized electronic band structure,and a diminished incidence of dielectric breakdown ascribed to the presence of sulfonyl ***,the SPI-HfO_(2)nanocomposite demonstrates a high charge-discharge efficiency of 95.7%at an elevated temperature of 150℃and an applied electric field of 200 MV/***,it achieves a maximum discharged energy density of 2.71 J/cm^(3),signalling its substantial potential for energy storage applications under extreme conditions.

关键词： dielectric polymer nanocomposites high-temperature high dielectric constant sulfonyl groups energy storage performance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Kinematic calibration method with high measurement efficiency and robust identification for hybrid machine tools

引用

Chinese Journal of Aeronautics 2024年第3期37卷 468-482页

作者： Liping WANG Mengyu LI Guang YU Weitao LI Xiangyu KONG State Key Laboratory of Tribology Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China Beijing Key Laboratory of Precision/Ultra-precision Manufacturing equipment and Control Beijing 100084China

Geometric error is the main factor affecting the machining accuracy of hybrid machine *** calibration is an effective way to improve the geometric accuracy of hybrid machine *** necessity to measure both position and orientation at each pose,as well as the instability of identification in case of incomplete measurements,severely affects the application of traditional calibration *** this study,a kinematic calibration method with high measurement efficiency and robust identification is proposed to improve the kinematic accuracy of a five-axis hybrid machine ***,the configuration is introduced,and an error model is ***,by investigating the mechanism error characteristics,a measurement scheme that only requires tool centre point position error measurement and one alignment operation is ***,by analysing the effects of unmeasured degrees of freedom(DOFs)on other DOFs,an improved nonlinear least squares method based on virtual measurement values is proposed to achieve stable parameter identification in case of incomplete measurement,without introducing additional ***,the proposed calibration method is verified through simulations and *** proposed method can efficiently accomplish the kinematic calibration of the hybrid machine *** accuracy of the hybrid machine tool is significantly improved after calibration,satisfying actual aerospace machining requirements.

关键词： Hybrid machine tool Calibration Measurement scheme Improved nonlinear least squares method Virtual measurement values

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：