检索结果-南通市图书馆

The behaviors of gas-liquid two-phase flow under gas kick during horizontal drilling with oil-based muds

Petroleum 2024年第1期10卷 49-67页

作者： Yu Su Huiyun Ma Jianhua Guo Xinyu Shen Zhaoliang Yang Jie Wu engineering technology research institute PetroChina Southwest Oil & Gas Field Company

Natural gas is easily soluble in oil-based muds(OBM), leading to complex flow behavior in wellbores,especially in horizontal wells. In this study, a new transient flow model considering wellbore-formation coupling and gas solubility on flow behavior is developed to simulate gas kicks during horizontal drilling with OBM. Furthermore, the effect of gas solubility on parameters such as bottom-hole pressure(BHP),gas void fraction and mixture velocity in the flow behavior is analyzed. Finally, several critical factors affecting flow behavior are investigated and compared to gas kicks in water-based muds(WBM) where the effect of solubility is neglected. The results show that the invading gas exists as dissolved gas in the OBM and as free gas in the WBM. Before the gas escapes from the OBM, the pit gain is zero and there is barely any change in the BHP, annulus return flow rate and mixture velocity, which means that detecting gas kicks through these warning signs can be challenging until they get very close to the surface and develop rapidly. However, in WBM drilling, these parameters change quickly with the increasing gas kick time. Additionally, for both cases, the longer the horizontal length and the greater reservoir permeability,the greater the decrease in BHP, and the shorter the time for gas to migrate from the bottom-hole to the wellhead. A larger flow rate contributes to a greater initial BHP and a lesser BHP reduction. This research is of value in characterizing gas kick behavior and identifying novel ways for early gas kick detection during horizontal drilling with OBM.

关键词： Flow behavior gas solubility gas kick Horizontal drilling oil-based muds Water-based muds

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

引用

Petroleum Science 2024年第3期21卷 1992-2004页

作者： Ji-Yun Zhang Chi Peng Jian-Hong Fu Quan Cao Yu Su Jian-Yun Pang Zi-Qiang Yu Petroleum engineering School Southwest Petroleum UniversityChengdu610500SichuanChina engineering technology research institute of CNPC southwest oil and gas field company Chengdu610017SichuanChina

To address the challenges associated with difficult casing running,limited annular space,and poor cementing quality in the completion of ultra-deep wells,the extreme line casing offers an effective solution over conventional ***,due to its smaller size,the joint strength of extreme line casing is reduced,which may cause failure when running in the *** address this issue,this study focuses on the CST-ZTΦ139.7 mm×7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint,taking into account the influence of geometric and material nonlinearities.A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse *** model investigates the stress distribution of each thread tooth subjected to various tensile forces and external ***,the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental *** findings reveal that,under axial tensile load,the bearing surface of each thread tooth experiences uneven stress,with relatively high equivalent stress at the root of each thread *** end thread teeth are valuable spots for *** is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth *** external pressure,the circumferential stress is highest at the small end of the external thread,leading to yield *** tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7%compared to the analytical and experimental values,proving the reliability of the finite element *** tensile strength of the joint is 3091.9 k ***,in terms of anti-collapse capability,the joints demonstrate higher resistance to collapse compared to the casing body,which is consistent with the test resul

关键词： Extreme line casing Elastic-plastic mechanics Finite element analysis Tensile strength Collapse strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Application status and research progress of CO2 fracturing fluid in petroleum engineering: A brief review

引用

Petroleum 2024年第1期10卷 1-10页

作者： Jinzhou Zhao Tong Wu Wanfen Pu Du Daijun Qingyuan Chen Bowen Chen Jintao Li Yitao Huang State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum University Shale gas research institute of PetroChina southwest oil & gas field company

This paper comprehensively reviews the application and research progress of CO2fracturing fluids in China, highlights the existing issues and puts forward suggestions for future development. Three types of fracturing fluid systems containing CO2, namely, CO2dry fracturing fluid, CO2energized fracturing fluid,and CO2foam fracturing fluid, are categorized based on the mass ratio and process difference between CO2, water, and treatment agents. field applications in China reveal several problem to be resolved:（1）The application scope of CO2fracturing fluids is restricted to depleted reservoirs, re-fracturing of old wells, and medium-deep reservoirs with low formation pressure coefficients;（2） different types of CO2fracturing fluids require different processes and ground supporting equipment;（3） optimization of CO2compatibility, functionality, temperature and salt tolerance, as well as the cost of treatment agents is necessitated;（4） existing CO2fracturing fluid system fail to perform well with low friction, low filtration,and high sand-carrying capacity.（5） there lacks a targeted industry standard for evaluation of performance of CO2fracturing fluid system and treatment agents. Therefore, in order to meet the goals of CCUS-EOR, CCUS-EGR, or integration of fracturing, displacement and burial by CO2, efforts should be made in the aspects that followed, including in-depth investigation of the mechanism of CO2fracturing fluids, the adaptability and compatibility between existing equipment, different CO2fracturing fluid systems and processes, and construction of treatment agents, low-density proppants and highperformance systems of recyclability and industrial-grade. In addition, optimization of CO2fracturing fluid system based fracturing design is also crucial taking such related factors such as overall reservoir geological conditions, petrophysical properties, CO2transportation, and well site layout into consideration.

关键词： Reservoir reconstruction CO 2 fracturing fluid Fracturing fluid system Fracturing displacement burial integration

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Evaluation of Well Spacing for Primary Development of Fractured Horizontal Wells in Tight Sandstone gas Reservoirs

引用

Fluid Dynamics & Materials Processing 2024年第5期20卷 1015-1030页

作者： Fang Li Juan Wu Haiyong Yi Lihong Wu Lingyun Du Yuan Zeng Exploration and Development research institute PetroChina Southwest Oil&Gas Field CompanyChengdu610041China oil and gas Resources Department PetroChina Southwest Oil&Gas Field CompanyChengdu610000China

Methods for horizontal well spacing calculation in tight gas reservoirs are still adversely affected by the complexity of related control factors,such as strong reservoir heterogeneity and seepage *** this study,the stress sensitivity and threshold pressure gradient of various types of reservoirs are quantitatively evaluated through reservoir seepage *** the basis of these experiments,a numerical simulation model(based on the special seepage mechanism)and an inverse dynamic reserve algorithm(with different equivalent drainage areas)were *** well spacing ranges of Classes I,II,and III wells in the Q gas field are determined to be 802–1,000,600–662,and 285–400 m,respectively,with their average ranges as 901,631,and 342.5 m,*** considering both the pairs of parallel well groups and series well groups as examples,the reliability of the calculation results is *** is shown that the combination of the two models can reduce errors and provide accurate results.

关键词： Well spacing for primary development tight gas reservoir fractured horizontal well threshold pressure gradient stress sensitivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Facies-controlled prediction of dolomite reservoirs in the Middle Permian Qixia Formation in Shuangyushi,northwestern Sichuan Basin

引用

Energy Geoscience 2024年第2期5卷 21-30页

作者： Chao Zheng Benjian Zhang Rongrong Li Hong Yin Yufeng Wang Xin Hu Xiao Chen Ran Liu Qi Zeng Zhiyun Sun Rui Zhang Xingyu Zhang Weidong Yin Kun Zhang Exploration and Development research institute PetroChina Southwest Oil&Gas Field CompanyChengduSichuan610500China Northwest Sichuan gas Branch PetroChina Southwest Oil&Gas Field CompanyJiangyouSichuan621709China PetroChina southwest oil&gas field company ChengduSichuan610500China School of Geosciences and technology Southwest Petroleum UniversityChengduSichuan610500China

The Middle Permian Qixia Formation in the Shuangyushi area,northwestern Sichuan Basin,develops shoal-facies dolomite *** pinpoint promising reservoirs in the Qixia Formation,deep thin shoal-facies dolomite reservoirs were predicted using the techniques of pre-stack Kirchhoff-Q compensation for absorption,inverse Q filtering,low-to high-frequency compensation,forward modeling,and facies-controlled seismic meme *** results are obtained in six ***,the dolomite reservoirs mainly exist in the middle and lower parts of the second member of Qixia Formation(Qi2 Member),which coincide with the zones shoal cores are ***,the forward modeling shows that the trough energy at the top and bottom of shoal core increases with increasing shoal-core thickness,and weak peak reflections are associated in the middle of shoal ***,five types of seismic waveform are identified through waveform analysis of seismic ***-I and Type-II waveforms correspond to promising facies(shoal core microfacies).Fourth,vertically,two packages of thin dolomite reservoirs turn up in the sedimentary cycle of intraplatform shoal in the Qi2 Member,and the lower package is superior to the upper package in dolomite thickness,scale and lateral ***,in plane,significantly controlled by sedimentary facies,dolomite reservoirs laterally distribute with consistent thickness in shoal cores at topographical highs and extend toward the ***,the promising prospects are the zones with thick dolomite reservoirs and superimposition of horstegraben structural traps.

关键词： Reservoir prediction Seismic facies Shoal-facies dolomite Qixia formation Shuangyushi Sichuan basin

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Application of fuzzy comprehensive evaluation method to assess effect of conformance control treatments on water-injection wells

引用

Petroleum 2024年第1期10卷 165-174页

作者： Hu Jia Pengwu Li Wei Lv Jianke Ren Chen Cheng Rui Zhang Zhengjun Zhou Yanbin Liang State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum University oil and gas technology research institute PetroChina Changqing Oilfield Company oil Production technology institute of PetroChina Dagang oilfield company

As an effective method to prolong the life of mature field, conformance control in water-injection well has been used wildly. Naturally, effect evaluation of conformance control has attracted great attention because it is an important guideline for the design of later enhanced oil recovery(EOR) plan. Usually,production responses such as excessive water reduction and oil production increment are widely used as the indicators. However, production responses may be unreliable due to the difficulty in determining an effective injection well which is caused by a large number of treated water-injection wells in a well group. Therefore, with the application of fuzzy comprehension evaluation(FCE), five evaluation indexes(injection pressure, injectivity index, slope of hall curve, variation coefficient and homogenization coefficient of injection profile) describe injection responses were selected to establish a new evaluation method in this paper. Based on fuzzy mathematics, FCE reflects the difference of evaluation ***, weights of evaluation indexes were obtained by analytic hierarchy process(AHP), which made the results more convincing. Taking Bai 239 oilfield as an example, the five injection responses indexes were used to assess treatment effect on five water-injection wells by single index evaluation and FCE. The results showed that among the five evaluation indexes mentioned above, the slope of hall curve was the most important factor affected evaluation result. In single index evaluation, opposite results may be produced easily on account of the one-sidedness of single index or human error. Furthermore, we found that effective treatment was a relative concept actually. The result of FCE was consistent with single index evaluation but FCE was more acceptable. This study suggests that FCE could be applied to another field such as water flooding, acidizing and hydraulic fracturing

关键词： Enhanced oil recovery Injection responses Fuzzy mathematics Analytic hierarchy process Effect evaluation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fracturing-flooding technology for low permeability reservoirs:A review

引用

Petroleum 2024年第2期10卷 202-215页

作者： Nianyin Li Shijie Zhu Yue Li Jingrui Zhao Bo Long Fei Chen Erzhen Wang Wentao Feng Yanan Hu Shubei Wang Chen Jiang State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum University CNPC southwest oil and gas field company Exploration and Development research institute CNPC southwest oil and gas field company Shale gas research institute Western Drilling Tuha Underground Operation company Changqing Downhole Technical Service company of Chuanqing Drilling engineering Co. Ltd.CNPC Petroleum technology research institute Petrochina Changqing Oilfield Company

The development of low-permeability oil and gas resources presents a significant challenge to traditional development methods. To address the problem of “no injection and no production” in low-permeability reservoirs, a novel fracture-injection-production integration technology named fracturing-flooding has been proposed by oilfield sites. This technology combines the advantages of conventional fracturing,water flooding, and chemical flooding, resulting in improved reservoir physical properties, increased injection, replenished energy, and increased oil displacement efficiency. The technology is especially suitable for low-permeability reservoirs that suffer from lack of energy, and strong ***-flooding technology has shown significant results and broad development prospects in some oilfields in China. This paper analyzes the development status of fracturing-flooding technology from its development history, technical mechanism, technical characteristics, process flow, types of fracturing and oil displacement fluids, and field applications. Physical and numerical simulations of fracturingflooding technology are also summarized. The results suggest that fracturing-flooding technology is more effective than conventional fracturing, water flooding, and chemical flooding in stimulating lowpermeability tight reservoirs and improving oil recovery. Moreover, it has a high input-output ratio and can be utilized for future reservoir stimulation and transformation.

关键词： Fracturing-flooding Enhanced oil recovery Low permeability reservoirs Water flooding Injection Chemical flooding Fracturing

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of proppant sizes and injection modes on proppant transportation and distribution in the tortuous fracture model

引用

Particuology 2024年第1期84卷 261-280页

作者： Jun Li Xu Han Siyuan He Mingyi Wu Xin Huang Nianyin Li State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Chongqing Industry Polytechnic College Chongqing401120China Sichuan Particles Energy and technology Co. LtdChengdu611630China engineering technology research institute of PetroChina southwest oil and gas field company Chengdu610017China

Particle-fluid transport and placement mechanism in tortuous fracture played a crucial role in uncon-ventional ***,most studies focused on mono-size proppant with fluid transport pro-cesses in tortuous ***,the mixture-size proppant with fluid movement mechanism in tortuous fracture was still ***,this study designed and applied a series of experiments with a physical analog model of a tortuous fracture with 120°and 90°-angled bends and combined high-speed camera-based *** experimental system was used to track different-mixture-sized proppant particle motion trajectories for a series of proppant injection schemes;The following conclu-sions were drawn from this study:*** pile-up processes mechanism in all investigated schemes were similar and could be reduced to four main *** packing structure at both sides of the fracture wall had different variation rates,which were controlled by the mix ratio(change from 1∶1-1∶5)of proppant *** new packing patterns,such as Zebra Stripe,had occurred,controlled by the different proppant injection ***-sized mono-proppant(30/50 mesh)had the highest transport efficiency in the tortuous fracture,followed by the mixed-sized multi-proppant(10/20 mesh:30/50 mesh),large-sized proppant(10/20 mesh)was the *** optimized alternating in-jection mode was recommended as injecting small-sized proppant first(30/50 mesh)and followed by mixed-sized multi-proppant(10/20 mesh:30/50 mesh),which could contribute to obtaining the optimal both proppant packing height and travel distance in tortuous *** correlations were devel-oped for predicting the proppant packing height and transportation distance.

关键词： Tortuous fracture model Mixed-sized proppant Multi-sized proppant injection mode Proppant motion and distribution Packing mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A new mixed type crack propagation criterion in shale reservoirs

引用

Petroleum 2024年第1期10卷 85-92页

作者： Muru Ding Zhirong Jin Yanjun Zhang Jinghong Hu Beijing Key Laboratory of Unconventional Natural gas Geology Evaluation and Development engineering China University of Geosciences Sinopec Jiangsu oil field Branch oil & gas technology research institute Changqing Oilefiled CompanyPetroChina

Hydraulic fracturing is a mainstream technology for unconventional oil and gas reservoirs development all over the world. How to use this technology to achieve high-level oil and gas resource extraction and how to form complex fracture networks as hydrocarbon transportation channels in tight reservoirs, which depends to a large extent on the interaction between hydraulic and pre-existing cracks. For hydraulic fracturing of fractured reservoirs, the impact of natural fractures, perforation direction, stress disturbances, faults and other influencing factors will produce a mixed I&II mode hydraulic fracture. To forecast whether hydraulic fractures cross pre-existing fractures, according to elastic mechanics and fracture mechanics, a stress state of cracks under the combination of tensile(I) and shear(II) is presented. A simple mixed-mode I&II hydraulic fracture's crossing judgment criterion is established, and the propagation of hydraulic fractures after encountering natural fractures is analyzed. The results show that for a given approaching angle there exists a certain range of stress ratio when crossing occurs. Under high approaching angle and large stress ratio, it is likely that hydraulic cracks will go directly through pre-existing cracks. The reinitiated angle is always controlled within the range of approximately 30°among the main direction of penetration.

关键词： Crack propagation criterion Stress ratio Approaching angle Reinitiated angle Mechanical model

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

An optimal flow rate allocation model of the oilfield treated oil pipeline network

引用

Petroleum 2024年第1期10卷 93-100页

作者： Hai Li Tianyou Fan Kun Wang Xueyuan Long Yu He Meng Wang Wen Cheng Qian Huang Huirong Huang Weichao Yu PetroChina southwest oil & gasfield company China Petroleum Planning & engineering institute School of Petroleum engineering Chongqing University of Science and Technology PipeChina oil & gas Control Center

oilfield treated oil pipeline network is the link connecting the upstream oilfields and the downstream refineries. Due to the differences in operating costs and transportation fee between different pipelines and the fluctuation in the demand and sales prices of the treated oil, there is an optimal flow allocation plan for the pipeline network to make the oilfield company obtain the highest social and economic benefit. In this study, a mixed integer nonlinear programming(MINLP) model is developed to determine the optimal flow rate allocation plan of the large-scale and complex treated oil pipeline network, and both the social and economic benefits are considered simultaneously. The optimization objective is the multi-objective which includes the largest user satisfaction and the highest economic benefit. The model constraints include the oilfield production capacity, refinery demand, pipeline transmission capacity,flow, pressure, and temperature of the node and station, and the pipeline hydraulic and thermal calculations. Python 3.7 is utilized for the programming of the off-line calculation procedure and the MINLP model, and GUROBI 9.0.2 is served as the MINLP solver. Moreover, the model is applied to a real treated oil pipeline network located in China, and three optimization scenarios are analyzed. For social benefit,the values of the user satisfaction of each refinery and the total network are 1 before and after optimization for scenarios 1, 2, and 3. For economic benefit, the annual revenue can be increased by 0.227,0.293, and 0.548 billion yuan after the optimization in scenario 1, 2, and 3, respectively.

关键词： Treated oil pipeline network Flow rate allocation Optimal User satisfaction Economic benefit

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：