检索结果-南通市图书馆

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1992-2004页

作者： Ji-Yun Zhang Chi Peng Jian-Hong Fu Quan Cao Yu Su Jian-Yun Pang Zi-Qiang Yu Petroleum engineering School Southwest Petroleum University engineering technology research institute of CNPC southwest oil and gas field company

To address the challenges associated with difficult casing running, limited annular space, and poor cementing quality in the completion of ultra-deep wells, the extreme line casing offers an effective solution over conventional casings. However, due to its smaller size, the joint strength of extreme line casing is reduced, which may cause failure when running in the hole. To address this issue, this study focuses on the CST-ZT Φ139.7 mm × 7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint, taking into account the influence of geometric and material nonlinearities. A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse load. The model investigates the stress distribution of each thread tooth subjected to various tensile forces and external pressures. Additionally, the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental approaches. The findings reveal that, under axial tensile load, the bearing surface of each thread tooth experiences uneven stress, with relatively high equivalent stress at the root of each thread tooth. The end thread teeth are valuable spots for failure. It is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth sequence. Under external pressure, the circumferential stress is highest at the small end of the external thread, leading to yield deformation. The tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7% compared to the analytical and experimental values,proving the reliability of the finite element model. The tensile strength of the joint is 3091.9 k N.Moreover, in terms of anti-collapse capability, the joints demonstrate higher resistance to collapse compared to the casing body, which is consistent with the test results where the pip

关键词： Extreme line casing Elastic-plastic mechanics Finite element analysis Tensile strength Collapse strength

Finite Element Method Simulation of Wellbore Stability under Different Operating and Geomechanical Conditions

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第1期20卷 205-218页

作者： Junyan Liu Ju Liu Yan Wang Shuang Liu Qiao Wang Yihe Du oil&gas Project research institute PetroChina Tarim Oilfield CompanyKorla841000China Petroleum engineering School Southwest Petroleum UniversityChengdu610500China

The variation of the principal stress of formations with the working and geo-mechanical conditions can trigger wellbore instabilities and adversely affect the well completion.A finite element model,based on the theory of poro-elasticity and the Mohr-Coulomb rock damage criterion,is used here to analyze such a risk.The changes in wellbore stability before and after reservoir acidification are simulated for different pressure differences.The results indicate that the risk of wellbore instability grows with an increase in the production-pressure difference regardless of whether acidification is completed or not;the same is true for the instability area.After acidizing,the changes in the main geomechanical parameters(i.e.,elastic modulus,Poisson’s ratio,and rock strength)cause the maximum wellbore instability coefficient to increase.

关键词： Wellbore stability finite element acidizing operation well completion

Effect of proppant sizes and injection modes on proppant transportation and distribution in the tortuous fracture model

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第1期84卷 261-280页

作者： Jun Li Xu Han Siyuan He Mingyi Wu Xin Huang Nianyin Li State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Chongqing Industry Polytechnic College Chongqing401120China Sichuan Particles Energy and technology Co. LtdChengdu611630China engineering technology research institute of PetroChina southwest oil and gas field company Chengdu610017China

Particle-fluid transport and placement mechanism in tortuous fracture played a crucial role in uncon-ventional reservoirs.Currently,most studies focused on mono-size proppant with fluid transport pro-cesses in tortuous fractures.However,the mixture-size proppant with fluid movement mechanism in tortuous fracture was still uncommon.Therefore,this study designed and applied a series of experiments with a physical analog model of a tortuous fracture with 120°and 90°-angled bends and combined high-speed camera-based equipment.This experimental system was used to track different-mixture-sized proppant particle motion trajectories for a series of proppant injection schemes;The following conclu-sions were drawn from this study:1.The pile-up processes mechanism in all investigated schemes were similar and could be reduced to four main stages.2.The packing structure at both sides of the fracture wall had different variation rates,which were controlled by the mix ratio(change from 1∶1-1∶5)of proppant size.3.Some new packing patterns,such as Zebra Stripe,had occurred,controlled by the different proppant injection sequences.4.Small-sized mono-proppant(30/50 mesh)had the highest transport efficiency in the tortuous fracture,followed by the mixed-sized multi-proppant(10/20 mesh:30/50 mesh),large-sized proppant(10/20 mesh)was the worst.5.An optimized alternating in-jection mode was recommended as injecting small-sized proppant first(30/50 mesh)and followed by mixed-sized multi-proppant(10/20 mesh:30/50 mesh),which could contribute to obtaining the optimal both proppant packing height and travel distance in tortuous fracture.6.Two correlations were devel-oped for predicting the proppant packing height and transportation distance.

关键词： Tortuous fracture model Mixed-sized proppant Multi-sized proppant injection mode Proppant motion and distribution Packing mechanism

A micro-crosslinked amphoteric hydrophobic association copolymer as high temperature-and salt-resistance fluid loss reducer for water-based drilling fluids

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1980-1991页

作者： Jian Li Yu-Xi Ji Xiao-Xiao Ni Kai-He Lv Xian-Bin Huang Jin-Sheng Sun School of Petroleum engineering China University of Petroleum(East China) Key Laboratory of Unconventional oil & gas Development China University of Petroleum(East China) Inspection and Testing Center of Huabei oil field company PetroChina Drilling Fluid research institute CNPC Engineering Technology R&D Company Limited

During ultradeep oil and gas drilling, fluid loss reducers are highly important for water-based drilling fluids, while preparing high temperature-and salt-resistance fluid loss reducers with excellent rheology and filtration performance remains a challenge. Herein, a micro-crosslinked amphoteric hydrophobic association copolymer(i.e., DADC) was synthesized using N,N-dimethyl acrylamide, diallyl dimethyl ammonium chloride, 2-acrylamido-2-methylpropane sulfonic acid, hydrophobic monomer, and pentaerythritol triallyl ether crosslinker. Due to the synergistic effects of hydrogen bonds, electrostatic interaction, hydrophobic association, and micro-crosslinking, the DADC copolymer exhibited outstanding temperature-and salt-resistance. The rheological experiments have shown that the DADC copolymer had excellent shear dilution performance and a certain degree of salt-responsive viscosity-increasing performance. The DADC copolymer could effectively adsorb on the surface of bentonite particles through electrostatic interaction and hydrogen bonds, which bring more negative charge to the bentonite, thus improving the hydration and dispersion of bentonite particles as well as the colloidal stability of the drilling fluids. Moreover, the drilling fluids constructed based on the DADC copolymer exhibited satisfactory rheological and filtration properties(FLHTHP= 12 m L) after aging at high temperatures(up to200°C) and high salinity(saturated salt) environments. Therefore, this work provided new insights into designing and fabricating high-performance drilling fluid treatment agents, demonstrating good potential applications in deep and ultradeep drilling engineering.

关键词： Fluid loss reducer Temperature- and salt-resistance Hydrophobic association Amphoteric Micro-crosslinking

Dynamic risk assessment of gas pipeline operation process by fusing visual and olfactory monitoring

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Safety Science and Resilience 2024年第2期5卷 156-166页

作者： Denglong Ma Weigao Mao Guangsen Zhang Chaoyi Liu Yi Han Xiaoming Zhang Hansheng Wang Kang Cen Wan Lu Denghui Li Hanyue Zhang School of Mechanical engineering Xi'an Jiaotong UniversityXi'an 710049China Hanzhong Natural gas Investinent Development Co.Ltd Hanzhong723011China Shaanxi Special Equipment Inspection and Testing institute Xi'an710038China School of Civil engineering and Architecture Southwest Petroleum UniversityChengdu610500China Sichuan Tianxin gas Co.Ltd. Mianyang62100China Petro China southwest oil and gas field company gas Branch Chengdu610500China

With the rapid increase in urban gas consumption,the frequency of maintenance and repair of gas pipelines has escalated,leading to a rise in safety accidents during these processes.The traditional manual supervision model presents challenges such as inaccurate monitoring results,incomplete risk factor analysis,and a lack of quantitative risk assessment.This research focuses on developing a dynamic risk assessment technology for gas emergency repair operations by integrating the monitoring outcomes of artificial olfactory for gas leakage information and video object recognition for visual safety factor monitoring data.To quantitatively evaluate the risk of the operation process,a three-dimensional risk assessment model combining gas leakage with riskcorrelated sensitivity was established as well as a separate three-dimensional risk assessment model integrating visual risk factors with predictable risk disposition.Furthermore,a visual risk quantification expression mode based on the risk matrix-radar map method was introduced.Additionally,a risk quantification model based on the fusion of visual and olfactory results was formulated.The verification results of simulation scenarios based on field data indicate that the visual-olfactory fusion risk assessment method can more accurately reflect the dynamic risk level of the operation process compared to simple visual safety factor monitoring.The outcomes of this research can contribute to the identification of safety status and early warning of risks related to personnel,equipment,and environmental factors in emergency repair operations.Moreover,these results can be extended to other operational scenarios,such as oil and gas production stations and long-distance pipeline operations.

关键词： gas pipelinemaintenance Dynamicriskassessment Visual-olfactoryfusion Risk matrix Risk quantification model

Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 115-124页

作者： Wen-Yang Wang Xiong-Qi Pang Ya-Ping Wang Zhang-Xin Chen Fu-Jie Jiang Ying Chen State Key Laboratory of Lithospheric Evolution Institute of Geology and GeophysicsChinese Academy of SciencesBeijing100029China State Key Laboratory of Petroleum Resources and Prospecting China University of Petroleum(Beijing)Beijing102249China College of Geosciences China University of Petroleum(Beijing)Beijing102249China research institute of Exploration and Development PetroChina Southwest Oil&Gas Field CompanyChengdu610041SichuanChina Chemical and Petroleum engineering Schulich School of EngineeringUniversity of CalgaryCalgaryT2N 1N4Canada

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

关键词： Deep layer Tarim Basin Hydrocarbon accumulation Depth limit of oil accumulation Prediction model

维普期刊数据库

Study on the Impact of Massive Refracturing on the Fracture Network in Tight oil Reservoir Horizontal Wells

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第5期20卷 1147-1163页

作者： Jianchao Shi Yanan Zhang Wantao Liu Yuliang Su Jian Shi Exploration and Development research institute Changqing Oilfield CompanyXi’an710018China National engineering Laboratory for Exploration and Development of Low Permeability oil and gas fields Xi’an710018China Key Laboratory of Unconventional oil and gas Development(China University of Petroleum(East China)) Ministry of EducationQingdao266580China

Class III tight oil reservoirs have low porosity and permeability,which are often responsible for low production rates and limited recovery.Extensive repeated fracturing is a well-known technique to fix some of these issues.With such methods,existing fractures are refractured,and/or new fractures are created to facilitate communication with natural fractures.This study explored how different refracturing methods affect horizontal well fracture networks,with a special focus on morphology and related fluid flow changes.In particular,the study relied on the unconventional fracture model(UFM).The evolution of fracture morphology and flow field after the initial fracturing were analyzed accordingly.The simulation results indicated that increased formation energy and reduced reservoir stress differences can promote fracture expansion.It was shown that the length of the fracture network,the width of the fracture network,and the complexity of the fracture can be improved,the oil drainage area can be increased,the distance of oil and gas seepage can be reduced,and the production of a single well can be significantly increased.

关键词： Type III tight oil reservoirs refracturing methods horizontal wells fracture network study fracture network evolution

Inter-layer interference for multi-layered tight gas reservoir in the absence and presence of movable water

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1751-1764页

作者： Tao Zhang Bin-Rui Wang Yu-Long Zhao Lie-Hui Zhang Xiang-Yang Qiao Lei Zhang Jing-Jing Guo Hung Vo Thanh National Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum University Shaanxi Yanchang Petroleum (Group) Corp.Ltd. Waseda research institute for Science and engineering Waseda University

Due to the dissimilarity among different producing layers, the influences of inter-layer interference on the production performance of a multi-layer gas reservoir are possible. However, systematic studies of inter-layer interference for tight gas reservoirs are really limited, especially for those reservoirs in the presence of water. In this work, five types of possible inter-layer interferences, including both absence and presence of water, are identified for commingled production of tight gas reservoirs. Subsequently, a series of reservoir-scale and pore-scale numerical simulations are conducted to quantify the degree of influence of each type of interference. Consistent field evidence from the Yan'an tight gas reservoir(Ordos Basin, China) is found to support the simulation results. Additionally, suggestions are proposed to mitigate the potential inter-layer interferences. The results indicate that, in the absence of water, commingled production is favorable in two situations: when there is a difference in physical properties and when there is a difference in the pressure system of each layer. For reservoirs with a multi-pressure system, the backflow phenomenon, which significantly influences the production performance, only occurs under extreme conditions(such as very low production rates or well shut-in periods). When water is introduced into the multi-layer system, inter-layer interference becomes nearly inevitable.Perforating both the gas-rich layer and water-rich layer for commingled production is not desirable, as it can trigger water invasion from the water-rich layer into the gas-rich layer. The gas-rich layer might also be interfered with by water from the neighboring unperforated water-rich layer, where the water might break the barrier(eg weak joint surface, cement in fractures) between the two layers and migrate into the gas-rich layer. Additionally, the gas-rich layer could possibly be interfered with by water that accumulates at the bottom of the wellbore due to gravitational differentiation duri

关键词： Tight gas Comingled production Interference Two-phase flow Water blocking

Internal electric field modulation by copper vacancy concentration of cuprous sulfide nanosheets for enhanced selective CO_(2) photoreduction

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 324-330页

作者： Xian Shi Weidong Dai Xiaoqian Li Yang Bai Qin Ren Yao Lei Xing'an Dong School of Chemistry and Environmental engineering Sichuan University of Science&EngineeringZigong 643000SichuanChina State Key Laboratory of oil and gas Reservoir Geology and Exploitation School of Oil&Natural Gas EngineeringSouthwest Petroleum UniversityChengdu 610500SichuanChina Chongqing Key Laboratory of Photo-Electric Functional Materials College of Physics and Electronic EngineeringChongqing Normal UniversityChongqing 401331SichuanChina research Center for Environmental and Energy Catalysis Institute of Fundamental and Frontier SciencesUniversity of Electronic Science and Technology of ChinaChengdu 611731SichuanChina

Although the internal electric field(IEF)of photocatalysts is acknowledged as a potent driving force for photocharge separation,modulating the IEF intensity to achieve enhanced photocatalytic performances remains a challenge.Herein,cuprous sulfide nanosheets with different Cu vacancy concentration were employed to study IEF modulation and corresponding direct charge transfer.Among the samples,Cu_(1.8)S nanosheets possessed intensified IEF intensity compared with those of Cu_(2)S and Cu_(1.95)S nanosheets,suggesting that an enhanced IEF intensity could be achieved by introducing more Cu vacancies.This intensified IEF of Cu_(1.8)S nanosheets induced numerous photogenerated electrons to migrate to its surface,and the dissociative electrons were then captured by Cu vacancies,resulting in efficient charge separation spatially.In addition,the Cu vacancies on Cu_(1.8)S nanosheets accumulated electrons as active sites to lower the energy barrier of rate-determining step of CO_(2)photoreduction,leading to the selective conversion of CO_(2)to CO.Herein,the manipulation of IEF intensity through Cu vacancy concentration regulation of cuprous sulfide photocatalysts for efficient charge separation has been discussed,providing a scientific strategy to rationally improve photocata lytic performances for solar energy conversion.

关键词： Internal electric field intensity Cuprous sulfide photocatalysts Cu vacancies Charge separation Selective CO_(2) photoreduction

维普期刊数据库