检索结果-南通市图书馆

Science China Chemistry 2024年第1期67卷 351-359页

作者： Long Chen Jia-Heng Cai You-Jun Yu Yang-Kun Qu Sheng-Yi Yang Sheng-Nan Zou Rui-Hong Liu Dong-Ying Zhou Liang-Sheng Liao Zuo-Quan Jiang Institute of Functional Nano&Soft materials(FUNSOM) Jiangsu Key Laboratory for Carbon-Based Functional Materials&DevicesSoochow UniversitySuzhou 215123China Macao Institute of materials Science and engineering Macao University of Science and TechnologyMacao 999078China

Multi-resonance thermally activated delayed fluorescence(MR-TADF)emitters can enable narrowband emission with high color purity and electroluminescence ***/carbonyl(N/C=O)system is receiving increasing attention while the nitrogen/boron(N/B)system has been widely *** decoration is an effective approach for N/B type MR-TADF system but always leads to broadening and red-shifting of the emission band in N/C=O MR-TADF *** attribute these unfavorable phenomena to the formation of intramolecular charge transfer between the MR-core and peripheral *** address this issue,we have developed a new strategy by decorating DMQAO(a fused N/C=O MR-core)with a triazine acceptor and a neutral terphenyl group to construct MTDMQAO and MBDMQAO,*** introduction of the triazine acceptor not only realizes efficient narrowband emission in MTDMQAO,but also accelerates the reverse intersystem crossing process through enhanced spin-orbital *** a result,MTDMQAO exhibits a significantly higher external quantum efficiency of 29.4%compared to the referent emitters,validating the rationality of our derivation *** study highlights the potential of the N/C=O system for MR-TADF emitters and provides important insights for understanding the difference between N/B and N/C=O systems.

关键词： carbonyl group narrowband acceptor decoration thermally activated delayed fluorescence OLEDs

Layered niobium carbide enabling excellent kinetics and cycling stability of Li-Mg-B-H hydrogen storage material Layered niobium carbide enabling excellent kinetics

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1153-1166页

作者： Li-Wen Lu Hui Luo Guang-Xu Li Yun Li Xin-Hua Wang Cun-Ke Huang Zhi-QiangLan Wen-Zheng Zhou Jin Guo Mohammad Ismail Hai-Zhen Liu Guangxi Novel battery materials research center of engineering Technology Guangxi Colleges and Universities Key Laboratory of Blue Energy and Systems IntegrationSchool of Physical Science and TechnologyGuangxi UniversityNanning530004China State Key Laboratory of Featured Metal materials and Life-Cycle Safety for Composite Structures Nanning530004China School of Mechanical and Electrical engineering Quzhou College of TechnologyQuzhou324000China Department of materials Science and engineering Zhejiang UniversityHangzhou310027China Faculty of Ocean engineering Technology and Informatics Universiti Malaysia Terengganu21030Kuala NerusTerengganuMalaysia Key Laboratory of Advanced Energy materials Chemistry(Ministry of Education) Nankai UniversityTianjin300071China

The Li-Mg-B-H composite(2LiBH_(4)+MgH_(2))has a high capacity of 11.4 wt%as a hydrogen storage ***,the slow kinetics and poor cycling stability severely restrict its practical *** this work,a layered Nb_(2)C MXene was first synthesized and then introduced to tailor the kinetics and cycling stability of the Li-Mg-B-H *** milled 2LiH+MgB_(2)composites were initially hydrogenated to obtain the 2LiBH_(4)+MgH_(2)*** 2LiBH_(4)+MgH_(2)+5wt%Nb_(2)C can release 9.0 wt%H_(2)in 30 min at 400℃,while it is only 2.7 wt%for the undoped 2LiBH_(4)+MgH_(2).The dehydrogenation activation energies of MgH_(2)and LiBH_(4)are 123 and 154 kJ·mol^(-1)respectively for the 5 wt%Nb_(2)C-doped composite,lower than the undoped composite(164 and 165 kJ·mol^(-1)).The 2LiBH_(4)+MgH_(2)+5 wt%Nb_(2)C possesses excellent cycling stability,with the reversible capacity only slightly reduced from 9.4 wt%for the 1st cycle to 9.3 wt%for the 20th ***_(2)C keeps stable in the composite and acts as an efficient catalyst for the Li-Mg-B-H *** is believed that both the layered structure and the active Nb element contribu te to the enhanced hydrogen storage performances of the Li-Mg-B-H *** work confirms that the Nb_(2)C MXene with layered stru cture has a significant enhancing impact on the Li-Mg-B-H hydrogen storage materials,which is different from the bulk NbC.

关键词： Hydrogen storage Lithium borohydride Magnesium hydride Nb_(2)C MXene

Sulfonated carbon dots modified IrO_(2)nanosheet as durable and high-efficient electrocatalyst for boosting acidic oxygen evolution reaction

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第9期17卷 8017-8024页

作者： Mengjie Ma Wenxiang Zhu Fan Liao Kui Yin Hui Huang Kun Feng Dongdong Gao Jinxin Chen Zenan Li Jun Zhong Lai Xu Yang Liu Mingwang Shao Zhenhui Kang Institute of Functional Nano and Soft materials(FUNSOM) Jiangsu Key Laboratory for Carbon-based Functional Materials and DevicesSoochow UniversitySuzhou 215123China Macao Institute of materials Science and engineering(MIMSE) Macao University of Science and TechnologyTaipaMacao 999078China

Oxygen evolution reaction(OER)plays a crucial role in developing energy conversion and adjusting electronic structure of the electrocatalysts can effectively improve the catalytic activity and ***,it is a challenge to adjust the electronic structure on two-dimensional iridium dioxide nanosheets(IrO_(2)NS),which have the advantages of high atom ***,we regulate the surface properties of IrO_(2)NS through sulfonated carbon dots(SCDs)to promote the OER catalytic *** catalyst IrO_(2)NS/SCDs-2 exhibited excellent catalytic activity with a lower overpotential of 180 mV than IrO_(2)NS(230 mV)at the current density of 10 mA·cm^(-2)in a 0.5 M H2SO4 *** after 160 h of stability testing,the overpotential of IrO_(2)NS/SCDs-2 only decreased by 4 ***,transient potential scanning test can visually demonstrate that the addition of SCDs improves the conductivity of the catalyst and increases the electron transfer rate.

关键词： sulfonated carbon dots oxygen evolution reaction electrocatalysis transient potential scanning

Natural high-porous diatomaceous-earth based self-floating aerogel for efficient solar steam power generation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第2期9卷 378-389页

作者： Aitang Zhang Kai Wang Md Julker Nine Mengyu Cao Hanwen Zong Zhiqiang Liu Hanwen Guo Jingquan Liu Dusan Losic College of materials Science and engineering Institute for Graphene Applied Technology InnovationCollaborative Innovation Center for Marine Biomass Fibers Materials and Textiles of Shandong ProvinceQingdao UniversityQingdao266071China The University of Adelaide School of Chemical Engineering and Advanced MaterialsARC Graphene Research HubNorth Engineering BuildingN206 AdelaideSA 5005Australia

The application of solar steam generation in seawater desalination is an effective way to solve the shortage of fresh water *** present,many kinds of photothermal conversion materials have been developed and used as evaporators in seawater ***,some evaporators need additional thermal insulation or water supply devices to achieve efficient photothermal *** addition,their complex,time consuming and no scalable preparation process,high cost of raw materials and poor salt resistance hinder the practical application of these *** to its distinctive nanoporous structure,diatomite as fossilized single-cells algae diatoms is a promising natural silica-based material for seawater *** are taken from sea and that makes true sense to use them in the ***,we report the first example of synthesis robust three-dimensional(3D)natural-diatomite composite by assembling polyaniline nanoparticles covered diatomite into the polyvinyl alcohol pre-treated melamine foam frameworks and demonstrate its application as new evaporator for seawater *** porous framework does not only improve the sunlight scattering efficiency,but also offer large network of channels for water *** inherent mechanism behind salt desalination process involves the absorption of water molecules on the surface of the internal silica micro-nano pores,and evaporation under the heat induced by the polyaniline absorbed ***,the metal ions are segregated by many available pores and channels to achieve the self-desalting *** developed evaporator possesses the superiority of multi-stage pore structure,strong hydrophilicity,low thermal conductivity,excellent light absorption,fast water transportation and salt-resistant crystallization as well as good *** evaporation rate without an additional device is found to be 1.689 kg m^(-2)h^(-1)under 1-Sun irradiation,and the energy conversion efficiency is as

关键词： Diatomite Micro/nanopores Polyaniline Three-dimensional composite Solar steam generation

Enhancing thermoelectric performance in P-type Mg_(3)Sb_(2)-based Zintls through optimization of band gap structure and nanostructuring

在线全文

学校读者我要写书评

暂无评论

Journal of materials Science & Technology 2024年第3期170卷 25-32页

作者： Yi-bo Zhang Ji-Sheng Liang Chengyan Liu Qi Zhou Zhe Xu Hong-bo Chen Fu-cong Li Ying Peng Lei Miao Guangxi Key Laboratory of Information Material Engineering Research Center of Electronic Information Materials and DevicesMinistry of EducationSchool of Material Science and EngineeringGuilin University of Electronic TechnologyGuilin 541004China Guangxi Key Laboratory for Relativity Astrophysics Center on Nanoenergy ResearchGuangxi Key Laboratory of Processing for Nonferrous Metal and Featured MaterialsSchool of Physical Science&TechnologyGuangxi UniversityNanning 530004China Guangxi Key Laboratory of Precision Navigation Technology and Application Guilin University of Electronic TechnologySchool of Information and CommunicationGuilin 541004China

P-type Mg_(3)Sb_(2)-based Zintls have attracted considerable interest in the thermoelectric(TE)field due to their environmental friendliness and low ***,compared to their n-type counterparts,they show relatively low TE performance,limiting their application in TE *** this work,we simultaneously introduce Bi alloying at Sb sites and Ag doping at Mg sites into the Mg_(3)Sb_(2)to coopera-tively optimize the electrical and thermal properties for the first time,acquiring the highest ZT value of∼0.85 at 723 K and a high average ZT of 0.39 in the temperature range of 323-723 K in sample Mg_(2.94)Ag_(0.06)Sb_(1.9)Bi_(0.1).The first-principle calculations show that the codoping of Ag and Bi can shift the Fermi level into the valence band and narrow the band gap,resulting in the increased carrier concentration from 3.50×10^(17)cm^(-3)in the reference Mg 3 Sb 0.9 Bi 0.1 to∼7.88×10^(19)cm^(-3)in sample Mg 2.94 Ag 0.06 Sb 0.9 Bi *** a result,a remarkable power factor of∼778.9μW m^(-1)K^(-2)at 723 K is achieved in sample Mg 2.94 Ag 0.06 Sb 0.9 Bi ***,a low lattice thermal conductivity of∼0.48 W m^(-1)K^(-1)at 723 K is also obtained with the help of phonon scattering at the distorted lattice,point defects,and nano-precipitates in sample Mg 2.94 Ag 0.06 Sb 0.9 Bi *** synergistic effect of using the multi-element co-doping/-alloying to optimize electrical properties in Mg_(3)Sb_(2)holds promise for further improving the TE performance of Zintl phase materials or even others.

关键词： Thermoelectric materials Band engineering Nanostructuring P-type Mg_(3)Sb_(2) Ag and Bi Co-doping

Ultra-homogeneous dense Ag nano layer enables long lifespan solid-state lithium metal batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 110-119页

作者： Yaning Liu Tianqi Yang Ruyi Fang Chengwei Lu Ruojian Ma Ke Yue Zhen Xiao Xiaozheng Zhou Wenkui Zhang Xinping He Yongping Gan Jun Zhang Xinhui Xia Hui Huang Xinyong Tao Yang Xia College of materials Sciencend engineering Zhejiang University of TechnologyHangzhou 310014ZhejiangChina Key Laboratory of Rare Earth Optoelectronic materialsnd devices of Zhejiang Province Institute of Optoelectronic Materialsnd DevicesChina Jiliang UniversityHangzhou 310018ZhejiangChina

The unstable electrolyte/lithium(Li)anode interface has been one of the key challenges in realizing high energy density solid-state lithium metal batteries(LMBs)***,a dense and uniform silver(Ag)nano interlayer with a thickness of∼35 nm is designed accurately by magnetron sputtering technology to optimize the electrolyte/Li anode *** Ag nano layer reacts with Li metal anode to in-situ form Li-Ag alloy,thus enhancing the physical interfacial contact,and further improving the interfacial wettability and *** particular,the Li-Ag alloy is inclined to form AgLi phase proved by cryo-TEM and DFT,effectively preventing SN from continuously“attacking”the Li metal anode due to the lower adsorption of succinonitrile(SN)molecules on AgLi than that of pure Li metal,thereby significantly reinforcing the interfacial ***,the enhanced physical and chemical stability of electrolyte/Li anode interface promotes the homogeneous deposition of Li^(+)and inhibits the dendrite *** Li-symmetric cell maintains stable operation for up to 1700 h and the cycling stability of LiFePO_(4)|SPE|Li full cell is remarkably improved at room temperature(capacity retention rate of 91.9%for 200 cycles).This work opens an effective way for accurate and controllable interface design of long lifespan solid-state LMBs.

关键词： Silvernano layer Poly(ethylene oxide) Solid polymer electrolyte Succinonitrile Lithium metal battery

Boron nitride microribbons strengthened and toughened alumina composite ceramics with excellent mechanical,dielectric,and thermal conductivity properties

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 496-506页

作者： Jilin Wang Dongping Lu Weiping Xuan Yuchun Ji Ruiqi Chen Shaofei Li Wenbiao Li Wenzhuo Chen Shilin Tang Guoyuan Zheng Fei Long Guangxi Key Laboratory of Optical and Electronic materials and devices Collaborative Innovation Center for Exploration of Nonferrous Metal Deposits and Efficient Utilization of ResourcesSchool of Materials Science and EngineeringGuilin University of TechnologyGuilin 541004China Key Laboratory of New Processing Technology for Nonferrous Metals and materials of Ministry of Education Guilin University of TechnologyGuilin 541004China School of materials Science and engineering Peking UniversityBeijing 100871China Department of Civil and Environmental engineering The Hong Kong Polytechnic UniversityKowloon 999077Hong KongChina

Aluminum oxide(Al_(2)O_(3))ceramics have been widely utilized as circuit substrates owing to their exceptional *** this study,boron nitride microribbon(BNMR)/Al_(2)O_(3)composite ceramics are prepared using spark plasma sintering(SPS).This study examines the effect of varying the amount of toughened phase BNMR on the density,mechanical properties,dielectric constant,and thermal conductivity of BNMR/Al_(2)O_(3)composite ceramics while also exploring the mechanisms behind the toughening and increased thermal conductivity of the fabricated *** results showed that for a BNMR content of 5 wt%,BNMR/Al_(2)O_(3)composite ceramics displayed more enhanced characteristics than pure Al_(2)O_(3)*** particular,the relative density,hardness,fracture toughness,and bending strength were 99.95%±0.025%,34.11±1.5 GPa,5.42±0.21 MPa·m^(1/2),and 375±2.5 MPa,*** values represent increases of 0.76%,70%,35%,and 25%,respectively,compared with the corresponding values for pure Al_(2)O_(3)***,during the SPS process,BNMRs are subjected to high temperatures and pressures,resulting in the bending and deformation of the Al_(2)O_(3)matrix;this leads to the formation of special thermal pathways within *** dielectric constant of the composite ceramics decreased by 25.6%,whereas the thermal conductivity increased by 45.6%compared with that of the pure Al_(2)O_(3)*** results of this study provide valuable insights into ways of enhancing the performance of Al_(2)O_(3)-based ceramic substrates by incorporating novel BNMRs as a second *** improvements are significant for potential applications in circuit substrates and related fields that require high-performance materials with improved mechanical properties and thermal conductivities.

关键词： boron nitride microribbons/aluminum oxide(BNMRs/Al_(2)O_(3))composite ceramics boron nitride microribbon(BNMR) spark plasma sintering(SPS) strengthening and toughening thermal conductivity

Vacancy defect MoSeTe embedded in N and F co-doped carbon skeleton for high performance sodium ion batteries and hybrid capacitors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 652-664,I0014页

作者： Dehui Yang Wentao Guo Fei Guo Jiaming Zhu Gang Wang Hui Wang Guanghui Yuan Shenghua Ma Beibei Wang State Key Laboratory of Photon-Technology in Western China Energy International Collaborative Center on Photoelectric Technology and Nano Functional MaterialsInstitute of Photonics&Photon-TechnologyNorthwest UniversityXi’an 710127ShannxiChina Key Laboratory of Synthetic and Natural Functional Molecule Chemistry(Ministry of Education) College of Chemistry&Materials ScienceNorthwest UniversityXi’an 710127ShannxiChina School of Chemistry and Chemical engineering Ankang Research Centre of New Nano-materials Science and TechnologyShaanxi University Innovation Research Institute of Advanced Energy Storage Materials and Battery Technology for Future IndustrializationAnkang UniversityAnkang 725000ShannxiChina

Sodium-ion batteries(SIBs) and hybrid capacitors(SIHCs) have garnered significant attention in energy storage due to their inherent advantages,including high energy density,cost-effectiveness,and enhanced ***,developing high-performance anode materials to improve sodium storage performa nce still remains a major ***,a facile one-pot method has been developed to fabricate a hybrid of MoSeTe nanosheets implanted within the N,F co-doped honeycomb carbon skeleton(MoSeTe/N,F@C).Experimental results demonstrate that the incorporation of large-sized Te atoms into MoSeTe nanosheets enlarges the layer spacing and creates abundant anion vacancies,which effectively facilitate the insertion/extraction of Na^(+) and provide numerous ion adsorption sites for rapid surface capacitive ***,the heteroatoms N,F co-doped honeycomb carbon skeleton with a highly conductive network can restrain the volume expansion and boost reaction kinetics within the *** anticipated,the MoSeTe/N,F@C anode exhibits high reversible capacities along with exceptional cycle *** coupled with Na_(3)V_(2)(PO_(4))_(3)@C(NVPF@C) to form SIB full cells,the anode delivers a reversible specific capacity of 126 mA h g^(-1) after 100 cycles at 0.1 A g^(-1).Furthermore,when combined with AC to form SIHC full cells,the anode demonstrates excellent cycling stability with a reversible specific capacity of50 mA h g^(-1) keeping over 3700 cycles at 1.0 A g^(-1).In situ XRD,ex situ TEM characterization,and theoretical calculations(DFT) further confirm the reversibility of sodium storage in MoSeTe/N,F@C anode materials during electrochemical reactions,highlighting their potential for widespread practical *** work provides new insights into the promising utilization of advanced transition metal dichalcogenides as anode materials for Na^(+)-based energy storage devices.

关键词： MoSeTe N F co-doped honeycomb carbon skeleton Sodium-ion batteries Sodium-ion hybrid capacitor

Ti_(3)C_(2)T_(x)MXene wrapped,carbon-coated porous Si sheets for improved lithium storage performance

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第2期35卷 617-621页

作者： Hui Cheng Yueming Liu Zhongling Cheng Xianying Wang Na Huang Haijiao Zhang Institute of Nanochemistry and Nanobiology School of Environmental and Chemical EngineeringShanghai UniversityShanghai 200444China Shanghai Key Laboratory of Green Chemistry and Chemical Processes School of Chemistry and Molecular EngineeringEast China Normal UniversityShanghai 200062China Energy materials research center AG Hydrogen materials & devices CAS Key Laboratory of Materials for Energy ConversionShanghai Institute of CeramicsChinese Academy of Sciences (SICCAS)Shanghai 200050China

Si-based materials have shown great potential as lithium-ion batteries(LIBs)anodes due to their natural reserves and high theoretical ***,the large volume changes during cycles and poor conductivity of Si lead to rapid capacity decay and poor cycling stability,ultimately limiting their commercial ***,we have skillfully utilized the microporous MCM-22 zeolite as the unique silicon source to produce porous Si(pSi)sheets by a simple magnesiothermic reduction,followed by a carbon coating and further Ti_(3)C_(2)T_(x)MXene assembly,obtaining the ternary pSi@NC@TNSs *** the design,porous Si sheets provide more active sites and shorten Li-ion transport paths for electrochemical *** N-doped carbon(NC)layer serves as a bonding layer to couple pSi and Ti_(3)C_(2)T_(x).The conductive network formed by 2D Ti_(3)C_(2)T_(x)and medium NC layer effectively enhances the overall charge transport of the electrode material,and helps to stabilize the electrode ***,the as-made pSi@NC@TNSs anode delivers an improved lithium storage performance,exhibiting a high reversible capacity of 925 mAh/g at 0.5 A/g after 100 *** present strategy provides an effective way towards high-performance Si-based anodes for LIBs.

关键词： Si anodes Ti_(3)C_(2)Ti_(x)MXene Porous structure Interfacial assembly Lithium-ion batteries

Integration of urchin-like MnCo_(2)O_(4)@C core–shell nanowire arrays within porous copper current collector for superior performance Li-ion battery anodes

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 599-611页

作者： Xue-Ru Zhang Qiong Wu Yong Zhang Xi-Fei Li Ting Xie Yu-Cheng Wu Instrumental Analysis center Hefei University of TechnologyHefei230009China Key Laboratory of Advanced Functional materials and devices of Anhui Province Hefei230009China School of materials Science and engineering Hefei University of TechnologyHefei230009China Institute of Advanced Electrochemical Energy Xi’an University of TechnologyXi’an710048China

Spinel MnCo_(2)O_(4) is a promising energy storage candidate as anode materials in lithium-ion batteries owing to synergistic effects of two intrinsic solid-state redox ***,low conductivity,poor rate capacity and rapid capacity fading have seriously impaired its practical *** overcome the inferiorities,urchin-like MnCo_(2)O_(4)@C core–shell nanowire arrays have been fabricated directly within a porous copper current collector via a facile hydrothermal method followed by a chemical vapor deposition carbonization *** a typical nanowire,the core is composed of interconnected MnCo_(2)O_(4)nanoparticles and the shell shows as a thin amorphous carbon *** integrated MnCo_(2)O_(4)@C/Cu structure could act as working anodes without using additives or polymer *** MnCo_(2)O_(4)@C/Cu possesses slightly longer Li-ion insertion/desertion pathway than that of MnCo_(2)O_(4)/Cu,the carbon shell could effectively prevent the pulverization of MnCo_(2)O_(4) and lower down charge transfer resistance and actively participate in Li-ion *** rearrangement of carbon atoms during lithiation/delithiation cycling could inhibit the formation of passive solid electrolyte interphase *** a result,the MnCo_(2)O_(4)@C/Cu electrode presents superior rate capacity(600 mAh·g^(−1) at 1 A·g^(−1)) and better stability(797 mAh·g^(−1) after 200 cycles at 100 mA·g^(−1)).The excellent reversible Li ion storage capacity,cycling stability and rate capacity endow MnCo_(2)O_(4)@C/Cu great potential as stable and high output integrated anode materials in Li-ion batteries.

关键词： MnCo_(2)O_(4)@C Urchin-like nanowire arrays Core-shell Integrated anode materials Lithium-ion batteries