检索结果-南通市图书馆

Nuclear Science and Techniques 2024年第1期35卷 145-154页

作者： M.Hajipour G.R.Ansarifar department of Nuclear engineering Faculty of PhysicsUniversity of IsfahanIsfahan 81746-73441Iran

Nuclear power plants exhibit non-linear and time-variable ***,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWR)is a fourth-generation conceptual *** an SCWR,the non-linear dynamics of the reactor require a controller capable of control-ling the *** this study,a pressure-tube-type SCWR was controlled during reactor power maneuvering with a higher order sliding mode,and the reactor outgoing steam temperature and pressure were controlled *** an SCWR,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power *** point kinetics equations with three groups of delayed neutrons were used in the ***-order and classic sliding mode controllers were separately manufactured to control the plant and were compared with the PI controllers speci-fied in previous *** controlled parameters were reactor power,steam temperature,and ***,for these parameters,the PI controller had certain instabilities in the presence of *** classic sliding mode controller had a higher accuracy and stability;however its main drawback was the chattering *** was highly accurate and stable and had a small computational *** reality,it followed the desired values without oscillations and chattering.

关键词： Supercritical water nuclear reactor Higher order sliding mode controller Steam temperature Steam pressure Point kinetics model

Performance of pulsed plasma thruster at low discharge energy

在线全文

学校读者我要写书评

暂无评论

Plasma Science and Technology 2024年第4期26卷 122-132页

作者：李鸿俊林泽豪胡浩俊吴文东陈爱虹杜德扬 department of physics Faculty of ScienceUniversity of MalayaKuala Lumpur 50603Malaysia faculty of engineering The University of Nottingham Malaysia CampusSemenyih 43500Malaysia faculty of engineering Multimedia UniversityCyberjaya 63100Malaysia

As the size of satellites scales down, low-power and compact propulsion systems such as the pulsed plasma thruster(PPT) are needed for stabilizing these miniature satellites in orbit. Most PPT systems are operated at 2 J or more of discharge energy. In this work, the performance of a PPT with a side-fed, tongue-flared electrode configuration operated within a lower discharge energy range of 0.5-2.5 J has been investigated. Ablation and charring of the polytetrafluoroethylene propellant surface were analyzed through field-effect scanning electron microscopy imaging and energy-dispersive X-ray spectroscopy. When the discharge energy fell below 2 J, inconsistencies occurred in the specific impulse and the thrust efficiency due to the measurement of the low mass bit. At energy ≥2 J, the performance parameters are compared with other PPT systems of similar configuration and discussed in depth.

关键词： pulsed plasma thruster low discharge energy performance parameters

Insights into adsorbent tortuosity across aqueous adsorption systems

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第5期88卷 71-88页

作者： Ackmez Mudhoo Marta Otero Khim Hoong Chu department of Chemical and Environmental engineering Faculty of EngineeringUniversity of MauritiusRéduit 80837Mauritius department of Applied Chemistry and physics Universidad de LeónCampus de Vegazana 24071 LeónSpain department of Chemical engineering Faculty of EngineeringUniversity of MalayaKuala Lumpur 50603Malaysia

Pore network,pore connectivity,and the resulting effective adsorbate pore diffusivity within an adsorbent are critical physical considerations in mass transport modeling of aqueous *** to these three adsorbent features are the adsorbent tortuosity and tortuosity factor *** concepts encompass the collective hindrance to intra-adsorbent adsorbate transport arising because of a disorderly adsorbent porous *** is crucial for materials scientists,chemists,chemical engineers,and water treatment specialists to understand the complex and variable connections among adsorbate chemistry,adsorbent chemistry,adsorbent porosity,pore shape,size,and tortuosity,pore wall effect,adsorbate-adsorbent interactions,and adsorbate-adsorbate interactions in competitively contaminated aqueous *** tortuosity has been sporadically studied in aqueous adsorption *** the small population of these studies,insightful observations and inferences have been ***,as it appears,no review has been published to compile,compare,and contrast these ***,this review concisely brings up those observations and interpretations around adsorbent tortuosity for aqueous adsorption *** notion of an adsorbent's tortuosity being single-valued is argued to be ***,perspectives are aired on possible research and development directions for elucidating the dynamic attributes of adsorbent tortuosity and applying them in real-scale adsorption-oriented water *** data acquired by filling in these research gaps can enable the design of adsorbents more adapted for real-scale water purification.

关键词： Adsorbent Tortuosity Porosity Pore diffusion models Aqueous systems

Synergistic effect of adsorption and photocatalytic degradation of oilfield-produced water by electrospun photocatalytic fibers of Polystyrene/Nanorod-Graphitic carbon nitride

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第7期141卷 287-303页

作者： Parisa Azmoon Mehrdad Farhadian Alireza Pendashteh Amir H.Navarchian department of Chemical engineering Faculty of EngineeringUniversity of IsfahanIsfahanIran department of Chemical engineering Faculty of EngineeringUniversity of GuilanRashtIran department of Water and Environmental engineering Caspian Sea Basin Research CenterUniversity of GuilanRashtIran

Graphitic carbon nitride with nanorod structure(Nr-GCN)was synthesized using melamine as a precursor without any other reagents by hydrothermal pretreatment ***,FTIR,SEM,N_(2)adsorption-desorption from BET,UV-Vis DRS spectroscopy,and photoluminescence were used to characterize the prepared ***,the photoelectrochemical behavior of nanoparticles was studied by photocurrent transient response and cyclic voltammetry ***(PS)fibrous mat was fabricated by electrospinning technique and used as a support for the stabilization of the *** performance of the synthesized nanoparticles and photocatalytic fibers(PS/Nr-GCN)was evaluated in oilfield-produced water treatment under visible light *** this process,oil contaminants were adsorbed by hydrophobic polystyrene fibers and simultaneously degraded by *** removal efficiency of chemical oxygen demand(COD)has been obtained 96.6%and 98.4%by Nr-GCN and PS/Nr-GCN,respectively,at the optimum conditions of pH4,photocatalyst dosage 0.5 g/L,COD initial concentration 550 mg/L,and illumination time 150 *** gas chromatography-mass spectroscopy analysis results showed 99.3%removal of total petroleum hydrocarbons using photocatalytic fibers of PS/*** results demonstrated that the GCN has outstanding features like controllable morphology,visible-light-driven,and showing high potential in oily wastewater ***,the synergistic effect of adsorption and photocatalytic degradation is an effective technique in oilfield-produced water treatment.

关键词： Graphitic carbon nitride(GCN) Nanorod structure Polystyrene fibrous mat Photocatalytic fibers Oilfield-produced water(OPW)

Lead-free metal halide scintillator materials for imaging applications

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第8期67卷 85-101页

作者： Junzhe LIN Dan GUO Tianrui ZHAI department of physics and Optoelectronic engineering Beijing University of Technology

High-energy radiation detection and imaging technology has significant applications in highenergy physics research, medical imaging, and industrial monitoring. Lead-free metal halides exhibit exceptional potential for conducting indirect detection of high-energy radiation due to their characteristics of low toxicity, strong stability, high light yield, and large Stokes shift. This paper reviews the most recent advances in lead-free metal halide scintillator materials for X-ray imaging. Subsequently, it lists the most important parameters of scintillator performance and introduces the production procedures for single crystal, powder,and nanocrystal scintillators. Furthermore, it discusses the manufacturing of scintillator films with improved performance, focusing on large-area flexible scintillator films and the coupling with microstructures. Finally,it discusses current challenges and opportunities for enhancing X-ray imaging using lead-free metal halide scintillator materials.

关键词： film imaging lead-free metal halide luminescence scintillators

Comparison between seismic analysis of twisting and regular 52-story towers considering soil-structure interaction

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Earthquake engineering and engineering Vibration 2024年第3期23卷 663-675页

作者： Mohamed Naguib Abouelsaad Mohammed Shaaban Salah El Bagalaty Mohamed E.El Madawy Structural engineering department Faculty of EngineeringMansura UniversityMansoura 35511Egypt faculty of engineering Delta University for Science and TechnologyGamasa 35712Egypt

A dynamic analysis of both twisting and regular towers is carried out to determine the results of considering soil-structure interaction(SSI)on high-rise *** addition,the difference between the seismic performance of using twisting towers over regular ones is *** twisting tower is a simulation of the Evolution Tower(Moscow).The towers’skeletons consist of RC elements and rest on a reinforced concrete piled-raft *** soil model is considered as multi-layered with the same soil properties as the zone chosen for the analysis(New Mansoura City,Egypt).The only difference between both towers is their shape in *** whole system is modelled and analyzed in a single step as one full 3D model,which is known as the direct approach in *** analyses are carried out using finite-element software(Midas GTS NX).Dynamic output responses due to three records of seismic loads are proposed and presented in some *** on the results,it is concluded that SSI has a considerable effect on the dynamic response of tall buildings mainly because of the foundation flexibility,as it leads to lengthening the vibration period,increasing the story drift and the base shear for both cases.

关键词： soil-structure interaction seismic analysis twisting towers base shear story drift finite element method Midas GTS NX

Chaotic Aquila Optimization Algorithm for Solving Phase Equilibrium Problems and Parameter Estimation of Semi-empirical Models

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic engineering 2024年第1期21卷 486-526页

作者： Oguz Emrah Turgut Mert Sinan Turgut Erhan Kırtepe department of Industrial engineering Faculty of Engineering and ArchitectureIzmir Bakircay UniversityMenemenizmirTurkey department of Mechanical engineering Faculty of EngineeringEge UniversityBornovaizmirTurkey department of Motor Vehicles and Transportation Technologies Sirnak UniversitySirnakTurkey

This research study aims to enhance the optimization performance of a newly emerged Aquila Optimization algorithm by incorporating chaotic sequences rather than using uniformly generated Gaussian random *** work employs 25 different chaotic maps under the framework of Aquila *** considers the ten best chaotic variants for performance evaluation on multidimensional test functions composed of unimodal and multimodal problems,which have yet to be studied in past literature *** was found that Ikeda chaotic map enhanced Aquila Optimization algorithm yields the best predictions and becomes the leading method in most of the *** test the effectivity of this chaotic variant on real-world optimization problems,it is employed on two constrained engineering design problems,and its effectiveness has been ***,phase equilibrium and semi-empirical parameter estimation problems have been solved by the proposed method,and respective solutions have been compared with those obtained from state-of-art *** is observed that CH01 can successfully cope with the restrictive nonlinearities and nonconvexities of parameter estimation and phase equilibrium problems,showing the capabilities of yielding minimum prediction error values of no more than 0.05 compared to the remaining algorithms utilized in the performance benchmarking process.

关键词： Aquila optimization algorithm Chaotic maps Parameter estimation Phase equilibrium Unconstrained optimization

Effects of Ta content on microstructure and oxidation behavior of AlCoCrFeNiYTax high entropy alloy

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4462-4475页

作者： Cang Gu Jun-Hao Hu Jian-Bo Song Cheng Xu Ming-Yu Hu Yu-Xuan Zhang Jiang Tian Chao Li Jing Feng faculty of Materials Science and engineering Kunming University of Science and Technology department of physics Hong Kong Baptist University

The oxidation behavior of the Al Co Cr Fe Ni YTaxhigh entropy alloy（HEA） doped with different Ta contents at 1100 °C is investigated. In this study, different reasons for the spallation of the oxide scales of HEAs without/with excessive Ta addition after 1000 h of oxidation are discussed, and the most suitable Ta doping content for this HEA is explored, in which the HEA exhibits both an exceptionally low oxidation rate, and the formation of oxide scales composed of intact a-Al2O3. Meanwhile, it is found that the addition of Ta can effectively inhibit the phase transition of β phase, which makes the surface of the oxide scale smoother. By combining our experimental results with Wagner–Hauffe theory, the influence of Ta drag effect on oxide scale growth is explained, which provides some theoretical guidance for the subsequent design of Al Co Cr Fe Ni HEAs, and can lead to the development of thermal barrier coatings at higher service temperature.

关键词： Al2O3 scales Elements diffusion High-entropy alloy Oxidation

Genuine entanglement under squeezed generalized amplitude damping channels with memory

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese physics B 2024年第2期33卷 158-163页

作者： Mazhar Ali department of Electrical engineering Faculty of EngineeringIslamic University MadinahMadinah 107Saudi Arabia

We study genuine entanglement among three qubits undergoing a noisy process that includes dissipation, squeezing,and decoherence. We obtain a general solution and analyze the asymptotic quantum states. We find that most of these asymptotic states can be genuinely entangled depending upon the parameters of the channel, memory parameter, and the parameters of the initial states. We study Greenberger–Horne–Zeilinger(GHZ) states and W states, mixed with white noise,and determine the conditions for them to be genuinely entangled at infinity. We find that for these mixtures, it is possible to start with a bi-separable state(with a specific mixture of white noise) and end with genuine entangled states. However, the memory parameter μ must be very high. We find that in contrast to the two-qubit case, none of the three-qubit asymptotic states for n → ∞ are genuinely entangled.

关键词： genuine entanglement squeezed thermal baths multipartite states

Applying the Protective Mn-Co-La_(2)O_(3)Coating on Crofer 22 APU Ferritic Stainless Steel Used as Solid Oxide Fuel Cell Interconnects

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 872-888页

作者： Farhad Mohsenifar Hadi Ebrahimifar Ahmad Irannejad department of Materials engineering and Metallurgy Faculty of EngineeringShahid Bahonar University of KermanKermanIran Mechanical engineering department Faculty of EngineeringHigher Education Complex of Bam76615-314BamIran department of Materials engineering Faculty of Mechanical and Materials EngineeringGraduate University of Advanced TechnologyKerman ***Iran

This research studies the effect of Mn-Co-La_(2)O_(3) coating synthesized by the electrodeposition method on the oxidation resistance and electrical conductivity of the Crofer 22 APU stainless steel interconnect plates in solid oxide fuel *** test samples were characterized by a field emission scanning electron microscope(FESEM)equipped with energy dispersive spectroscopy(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The oxidation kinetics of the coated and uncoated samples were studied by tracking their weight changes over time at 800°C,showing that the oxidation mechanism for all samples follows the parabolic *** oxidation rate constant(k_(p))values of the coated sample compared with that of the uncoated one indicated a reduction in the oxidation rate of the steel substrate in the presence of the Mn-Co-La_(2)O_(3) *** examination of the cross-section of different samples after the isothermal oxidation for 500 h at 800°C exhibited that applying the composite coating leads to a decrease in the thickness of the chromia layer formed on the steel ***,under these conditions,the area-specific resistance(ASR)of the coated sample(13.11 mΩcm^(2))is significantly lower than that of the uncoated one(41.45 mΩcm^(2)).

关键词： Area specific resistance Oxidation Fuel cell Composite coating