检索结果-南通市图书馆

Mathematical modeling and simulations of stress mitigation by coating polycrystalline particles in lithium-ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 947-962页

作者： N.IQBAL J.CHOI S.F.SHAH C.LEE S.LEE department of mechanical Roboticsand Energy EngineeringDongguk University-SeoulSeoul 04620Republic of Korea

A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more ***,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress *** paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMC active particles mitigates stress levels.

关键词： lithium-ion battery(LIB) polycrystalline particle coating finite element simulation Ni-rich LiNixMnyCo_(z)O_(2)(x>0.8)(NMC)

Numerical investigation of the photo-thermal characteristics of a direct absorption solar collector using Monte Carlo and finite volume methods

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2024年第8期67卷 2436-2448页

作者： ZHU YanLong LI SuNing FAN JianHua KONG WeiQiang YUAN Yuan TAN HePing School of energy Science and engineering Harbin Institute of Technology department of Civil engineering and mechanical engineering Technical University of Denmark School of Vehicle and energy Yanshan University

In this study, a novel model of photothermal conversion in a direct absorption solar collector based on the Monte Carlo and finite volume methods was built and validated and the temperatures of the novel and traditional solar collectors were compared. The sensitivity of the parameters to the radiative heat loss was investigated. Finally, the radiative heat transfer characteristics were discussed using the radiative exchange factor. The results of this study validated the advantages of the novel solar collector at both the surface and fluid temperatures. Under the conditions used in this study, the maximum temperature difference of the novel solar collector was 30 K, compared with 193 K for the traditional solar collector. Furthermore, the collector was divided into several units along the flow direction. The radiative exchange factor indicated that with an increase in the attenuation coefficient, the percentage of radiation intensity in the total solar radiation absorbed by the corresponding unit ***, it decreased with an increase in the incident angle and scattering albedo. These results provide a reference for addressing the low efficiency and thermal damage caused by traditional solar collectors at high temperatures.

关键词： direct absorption solar collector radiative heat transfer Monte Carlo

Synthesis and Thermal Characterization of Solar Salt-Based Phase Change Composites with Graphene Nanoplatelets

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 491-500页

作者： Pethurajan VIGNESHWARAN Saboor SHAIK Sivan SURESH Müslüm ARICI Asif AFZAL department of Thermal and energy engineering School of Mechanical Engineering(SMEC)Vellore Institute of TechnologyVelloreTamil NaduIndia Nanotechnology Research Laboratory Department of Mechanical EngineeringNational Institute of TechnologyTiruchirappalliTamil NaduIndia mechanical engineering department Engineering FacultyKocaeli UniversityUmuttepe CampusKocaeli41001Turkey department of mechanical engineering P.A.College of Engineering(affiliated to Visvesvaraya Technological UniversityBelagavi)Mangaluru574153India

Thermal energy storage(TES) systems use solar energy despite its irregular availability and day-night temperature *** work reports the thermal characterizations of solar salt-based phase change composites in the presence of graphene nanoplatelets(GNP).Solar salt(60:40 of NaNO_(3):KNO_(3)) possessing phase transition temperature and melting enthalpy of 221.01℃ and 134.58 kJ/kg is proposed as a phase change material(PCM) for high-temperature solar-based energy storage *** conductivity must be improved to make them suitable for widespread applications and to close the gap between the system needs where they are *** is added at weight concentrations of 0.1%,0.3%,and 0.5% with solar salt using the ball milling method to boost its thermal *** studies indicated the formation of a uniform surface of GNP on solar *** spectrum peaks identified the physical interaction between salt and *** characterization of the composites,such as thermal conductivity,DSC and TGA was carried out for the samples earlier and later 300 thermal cycles.0.5% of GNP has improved the thermal conductivity of salt by 129.67% and after thermal cycling,the enhancement reduced to 125.21% indicating that thermal cycling has a minor impact on thermal *** change temperature decreased by around 2.32% in the presence of0.5% GNP and the latent heat reduced by 4.34% after thermal *** thermograms depicted the composites initiated the weight loss at around 550℃ after which it was *** thermal cycling,the weight loss initiated at ~40℃ lower compared to pure salt,which was found to be a minor *** characterization of solar salt and GNP-based solar salt composites revealed that the composites can be used for enhanced heat transfer in high-temperature solar-based heat transfer and energy storage applications.

关键词： thermal energy storage high temperature solar salt graphene nanoplatelets thermal characterization

Generalized polynomial chaos expansion by reanalysis using static condensation based on substructuring

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 819-836页

作者： D.LEE S.CHANG J.LEE department of Automotive engineering Hanyang UniversitySeoul 04763Republic of Korea School of mechanical engineering Chungnam National UniversityDaejeon 34134Republic of Korea department of mechanical Robotics and Energy EngineeringDongguk UniversitySeoul 04620Republic of Korea

This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random *** method consists of a generalized polynomial chaos expansion(GPCE)for statistical moment and reliability analyses associated with the stochastic output and a static reanalysis method to generate the input-output data *** the reanalysis,we employ substructuring for a structure to isolate its local regions that vary due to random *** allows for avoiding repeated computations of invariant substructures while generating the input-output data *** substructuring with static condensation further improves the computational efficiency of the reanalysis without losing ***,the GPCE with the static reanalysis method can achieve significant computational saving,thus mitigating the curse of dimensionality to some degree for UQ under high-dimensional *** numerical results obtained from a simple structure indicate that the proposed method for UQ produces accurate solutions more efficiently than the GPCE using full finite element analyses(FEAs).We also demonstrate the efficiency and scalability of the proposed method by executing UQ for a large-scale wing-box structure under ten-dimensional(all-dependent)random inputs.

关键词： forward uncertainty quantification(UQ) generalized polynomial chaos expansion(GPCE) static reanalysis method static condensation substructuring

Experimental Study on Soot Suppression of Acetylene Diffusion Flame by Acoustic-Excited Oscillation in Rijke-Type Burner

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 235-248页

作者： ZHU Yibin GUO Hui SUO Yan'ge WU Minle YE Yanghui LI Guoneng ZHANG Zhiguo School of mechanical and energy engineering Zhejiang University of Science and TechnologyHangzhou 310023China

This work reports that the flame oscillation induced by acoustic excitation can effectively suppress soot generation in Rijke-type *** the acoustic frequency is close to the natural frequency of the burner system,it can produce resonance resulting in intense oscillation of the *** relationship between the soot suppression efficiency and the acoustic field of standing wave at different flame positions is *** with that under self-excited oscillation,when there is external forced acoustic force introduced to the flame,oscillation combustion occurred in a lager zone in the glass *** fundamental cause of different soot suppression efficiency at different positions is that the standing wave acoustic field causes the particles to move at different speeds in different positions of the glass *** axial particle velocity difference results in the formation of acoustic vortexes and the change of the flame *** high particle velocity causes the air in the glass tube to turn into the turbulent condition and make the flame temperature *** results show that the surface growth rate of soot is reduced,while the oxidation rate of soot is enhanced,which result in the soot suppression under acoustic *** study can provide some reference for the practical application of oscillate combustion in soot suppression.

关键词： soot suppression acetylene diffusion flame acoustic-excited oscillation standing wave

Experimental Study on Heat Storage Properties Comparison of Paraffin/Metal Foams Phase Change Material Composites

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 469-478页

作者： Waqar AHMED Abid HUSSAIN Hanzla SHAHID Imran ALI Hafiz Muhammad ALI department of mechanical engineering University of Engineering and TechnologyTaxila47080Pakistan department of mechanical engineering Institute of Space TechnologyIslamabadPakistan department of mechanical Mechatronics and Manufacturing EngineeringUniversity of Engineering and Technology LahoreFaisalabad CampusPunjabPakistan mechanical engineering department King Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia Interdisciplinary Research Center for Renewable energy and Power Systems(IRC-REPS) King Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia

Heat storage properties of phase change materials(PCMs) are essential characteristics that perform a key role in thermal heat energy storage *** thermal properties of PCMs can be improved by developing metal foam/PCM *** addition of metal foam in PCMs has a significant effect on the thermal characteristics of *** this paper,the heat storage properties of two different metal foam/PCM composites were experimentally *** behavior of paraffin in metal foam(copper and iron-nickel)/paraffin composites concerning pure paraffin at a constant heat flux of 1000 W/m^(2) in three directions simultaneously(x,y,and z) was *** was infiltrated into copper and iron-nickel foams to develop composite materials which resulted in enhancing the thermal conductivity of the paraffin.A comparative analysis is made on the heat storage properties of paraffin in copper and iron-nickel foams/paraffin *** temperature distribution during the phase transition process is experimentally *** comparison indicates that temperature uniformity in copper foam/paraffin composite is better than in iron-nickel foam/paraffin composite and pure paraffin at the same heat *** results show that at heat flux of 1000 W/m^(2),the heat storage time for copper foam/paraffin composite is 20.63% of that of iron-nickel foam/paraffin composite.

关键词： heat storage capacity paraffin/metal foam composite temperature uniformity heat storage rate phase transition process

Analysis and Optimization of Operational and Pollutant Attributes of Diesel Engine with CNT-Infused Orange Peel Biodiesel-Diesel Blend Fuel

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 761-778页

作者： Ranjeet RAI R.R.SAHOO mechanical engineering department GLA UniversityMathura281406India mechanical engineering department IIT(BHU)Varanasi221005India

The current study is performed to find sustainable solutions for the future of transportation and environmental *** conventional methods and experimental design table(L16 Orthogonal Array)techniques have been employed to examine and optimize a diesel-powered engine's operational and pollutant *** L16 Orthogonal Array is obtained through Taguchi's experimental design approach using Minitab 16 *** experimental design incorporated three control variables,namely engine speed,fuel type,and engine load,each with four *** operational parameters,namely brake thermal efficiency(BTE)and brake specific fuel consumption(BSFC),as well as the emission characteristics,including hydrocarbon(HC),carbon monoxide(CO),nitrogen oxide(NO),and smoke emissions,were acquired using the L16 orthogonal array(OA) and subsequently *** utilization of methodologies such as signal-to-noise(S/N) ratio and grey analysis was employed to determine the optimal operational state of the engine to achieve maximum performance while minimizing *** engine's ideal state of operation,in terms of BTE and BSFC,was determined to be at 75% engine load,1000 r/min engine speed,and using 10^(-4)(in vol) carbon nanotube incorporated 20% orange peel biodiesel(OPB20CNT100) blended fuel(A3-B1-C4).The study indicated that engine load significantly influenced BTE and BSFC,with 84.05% and 87.79% contribution factors,*** 25% engine load,1000 r/min,and OPB20CNT100 fuel(A1-B1-C4) CO,smoke,NO,and HC emissions were the *** load affects emissions the *** BSFC increased 3.10% and NO emissions 1.77%.BTE,CO,smoke,and HC emissions decreased by 1.9%,12.29%,47.05%,and 47.22%,respectively,at optimal operating conditions concerning diesel *** study shows that Taguchi-Grey's experimental design optimizes diesel engine operational and pollutant *** outcomes revealed that orange peel biodiesel infused with CNT can replace diesel fuel in a

关键词： Taguchi-Grey method OPB20CNT100 transesterification S/N ratio GRG HC CO and NO

Study on a semi-resolved CFD-DEM method for rod-like particles in a gas-solid fluidized bed

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第4期87卷 20-36页

作者： Liping He Zhengxian Liu Yongzhi Zhao department of Mechanics School of Mechanical EngineeringTianjin UniversityTianjin300350China Insttute of Process quipment College of Energy EngineeringZhejiang UniversityHangzhou30027China

Based on a semi-resolved CFD-DEM coupling method,this study proposed a method that uses the minimum distance between the fluid grid and the particle boundary as a reference value to determine the degree of influence of the target fluid grid on the particle's drag force.A fluidized bed of rod-like particles was chosen as a typical case to investigate the effect of different fluid grid scales on various fluidized bed characteristic *** calculation performance of the semi-resolved and unre-solved CFD-DEM coupling algorithm on key fluidized bed characteristic parameters such as average pressure drop,particle frequency distribution with bed height,and particle orientation distribution were *** was found that the semi-resolved CFD-DEM coupling algorithm gradually obtained results with higher consistency with decreasing fluid grid scale for key parameters such as particle frequency distribution with bed height,particle orientation distribution,and time-history mixing index,exhibiting a phenomenon similar to grid independence in fluid *** comparing with experimental results,it was verified that the semi-resolved CFD-DEM coupling algorithm can be applied to simulate multi-granular gas-solid systems with fluid grid scales equivalent to particle *** algorithm solves the limitation of fluid grid scale in the unresolved CFD-DEM coupling framework and improves the grid adaptability of the CFD-DEM coupling simulation algorithm.

关键词： CFD-DEM Semi-resolved method Fluid-solid flow Non-spherical particle Fluidized bed

Flame Structure of Methane and Kerosene Combustion with a Compact Concave Flame-Holder using the LES-pdf Method

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 222-234页

作者： WANG Fang WANG Yunfan WEI Guanyi LIU Denghuan JIN Jie JONES P.William School of energy and Power engineering Beihang UniversityBeijingBeijing 100191China department of mechanical engineering Imperial College LondonLondon SW72AZUK

Compact flame-holders for afterburners are an increasing requirement for modern aero ***,flame-holder design is non-trivial since high inlet temperatures,velocities,and elaborate structures induce complex turbulence,combustion,and spray coupling in modern *** this work,the LES-pdf and stochastic fields-Lagrangian particle spray methods are used to investigate methane and aviation kerosene combustion structures formed by new-type concave *** flow pattern,combustion mode,and flame structure of gaseous and liquid fuel around a concave flame-holder are analyzed,discussed,and compared with experimental *** reveal that the flame stability of a concave flame-holder is better than that of the non-concave ***,when using liquid fuel,the concave flame-holder forms a stable and compact *** results suggest concave flame-holders are a promising design for compact afterburners.

关键词： concave structure flame-holder LES-pdf spray combustion flame structure AECSC