检索结果-南通市图书馆

energy & environmental Materials 2024年第3期7卷 295-306页

作者： Changhyun Lee Chanyong Lee Kyungjin Chae Taemin Kim Seaeun Park Yohan Ko Yongseok Jun Department of energy environment policy and technology Graduate School of Energy Environment(KU-KIST Green School)Korea University Nano Electronic Materials and Components Research Center Gumi Electronics and Information Technology Research Institute (GERI) energy Materials Research Center Clean Energy Research DivisionKorea Institute of Science and Technology (KIST)

Compared to organic-inorganic hybrid perovskites,the cesium-based allinorganic lead halide perovskite （CsPbI3） is a promising light absorber for perovskite solar cells owing to its higher resistance to thermal ***,additional research is required to reduce the nonradiative recombination to realize the full potential of ***,the diffusion of Cs ions participating in ion exchange is proposed to be an important factor responsible for the bulk defects in γ-*** based on first-principles density functional theory reveal that the [PbI6]4-octahedral tilt modifies the perovskite crystallographic properties in γ-CsPbI3,leading to alterations in its bandgap and crystal *** addition,by substituting amorphous barium titanium oxide （a-BaTiO3） for TiO2as the electron transport layer,interfacial defects caused by imperfect energy levels between the electron transport layer and perovskite are ***-resolution transmission electron microscopy and electron energy loss spectroscopy demonstrate that a-BaTiO3forms entirely as a single phase,as opposed to Ba-doped TiO2hybrid nanoclusters or separate domains of TiO2and ***,inorganic perovskite solar cells based on the a-BaTiO3electron transport layer achieved a power conversion efficiency of 19.96%.

关键词： amorphous BaTiO3 electron transport layer moisture γ-CsPbI3

Machine learning enabled film pressure sensor to identify surface contacts:An application in surface transmission of infectious disease

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第6期17卷 1023-1036页

作者： Baotian Chang Jianchao Zhang Yingying Geng Jiarui Li Doudou Miao Nan Zhang Beijing Key Laboratory of Green Built environment and energy Efficient technology Beijing University of TechnologyBeijing100124China

The global prevalence of infectious diseases has emerged as a significant challenge in recent *** transmission is a potential transmission route of most gastrointestinal and respiratory infectious diseases,which is related to surface touch *** observation,the traditional method of surface touching data collection,is characterized by limited accuracy and high labor *** this work,we proposed a methodology based on machine learning technologies aimed at obtaining high-accuracy and low-labor-cost surface touch behavioral data by means of sensor-based contact *** touch sensing device,primarily utilizing a film pressure sensor and Arduino board,is designed to automatically detect and collect surface contact data,encompassing pressure,duration and *** make certain the surface touch behavior and to describe the behavioral data more accurately,six classification algorithms(*** Vector Machine and Random Forest)have been trained and tested on an experimentally available dataset containing more than 500 surface *** classification results reported the accuracy of above 85%for all the six classifiers and indicated that Random Forest performed best in identifying surface touch behaviors,with 91.8%accuracy,91.9%precision and 0.98 *** study conclusively demonstrated the feasibility of identifying surface touch behaviors through film pressure sensor-based data,offering robust support for the calculation of viral load and exposure risk associated with surface transmission.

关键词： surface transmission touch behavior film pressure sensor random forest infectious disease

Regulating solid electrolyte interphase film on fluorinedoped hard carbon anode for sodium-ion battery

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon energy 2024年第6期6卷 200-215页

作者： Cuiyun Yang Wentao Zhong Yuqiao Liu Qiang Deng Qian Cheng Xiaozhao Liu Chenghao Yang Guangzhou Key Laboratory for Surface Chemistry of energy Materials New Energy Research InstituteSchool of Environment and EnergySouth China University of TechnologyGuangzhouChina

For the performance optimization strategies of hard carbon,heteroatom doping is an effective way to enhance the intrinsic transfer properties of sodium ions and electrons for accelerating the reaction ***,the previous work focuses mainly on the intrinsic physicochemical property changes of the material,but little attention has been paid to the resulting interfacial regulation of the electrode surface,namely the formation of solid electrolyte interphase(SEI)*** this work,element F,which has the highest electronegativity,was chosen as the doping source to,more effectively,tune the electronic structure of the hard *** effect of F-doping on the physicochemical properties of hard carbon was not only systematically analyzed but also investigated with spectroscopy,optics,and in situ characterization techniques to further verify that appropriate F-doping plays a positive role in constructing a homogenous and inorganic-rich SEI *** experimentally demonstrated link between the electronic structure of the electrode and the SEI film properties can reframe the doping optimization strategy as well as provide a new idea for the design of electrode materials with low reduction kinetics to the *** a result,the optimized sample with the appropriate F-doping content exhibits the best electrochemical performance with high capacity(434.53 mA h g^(-1)at 20mA g^(-1))and excellent rate capability(141 mAh g^(-1)at 400 mA g^(-1)).

关键词： F-doping hard carbon reduction kinetics sodium-ion batteries solid electrolyte interphase film

Simultaneously enhanced electrochemical performance and air stability of Ni-rich cathode with a modified washing process

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 87-97页

作者： Ben-Rui Hu Ying-Yi Yuan Yu-Cheng Wang Xun-Hui Xiong School of environment and energy Guangdong Provincial Key Laboratory of Advanced Energy Storage MaterialsSouth China University of TechnologyGuangzhou 510640China

Water washing has been regarded as one of the most effective strategies to remove surface residual lithium of nickel-rich layered oxides for lithium-ion batteries(LIBs).However,the loss of lattice lithium during the water washing process deteriorates the electrochemical performances and air ***,washing the LiNi_(0.90)Co_(0.05)Al_(0.02)O_(2)(NCA) with ammonium dihydrogen phosphate(NH_(4)H_(2)PO_(4)) solution has been proposed to simultaneously enhance electrochemical performances and air stability,in which in-situ generated Li_(3)PO_(4) coating layer on surface of NCA can suppress the loss of lattice ***,as a fast ionic conductor,Li_(3)PO_(4) coating layer on NCA can prevent the direct contact with electrolyte/*** a result,the NH_(4)H_(2)PO_(4) solution washed NCA cathode can deliver a high capacity of131.9 mAh·g^(-1) at 10.0C rate as well as impressive cycle stability with a capacity retention of 83.1% after 100 cycles at 1.0C,much higher than those of water washed NCA(WS-NCA) *** exposed in air for 7 days,the NH_(4)H_(2)PO_(4) solution washed NCA electrode can more effectively maintain the structural integrity as well as the electrochemical performances than water-washed *** work provides a simple and effective approach to enhance the cycle stability and air stability of Nickel-rich cathode materials.

关键词： Layered Ni-rich cathode Residual lithium Li_(3)PO_(4)coating Rate performance Air stability

维普期刊数据库

Microwave-assisted pyrolysis of plastics for aviation oil production:energy and economic analyses

在线全文

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第7期18卷 141-153页

作者： Sichen Fan Yifan Liu Yaning Zhang Wenke Zhao Chunbao Xu School of energy Science and Engineering Harbin Institute of TechnologyHarbin 150001China School of energy and environment City University of Hong KongHong Kong SARChina

Microwave-assisted pyrolysis is an effective method for recycling plastic wastes into oils that can be used for aviation fuels. In this study, energy and economic analyses of aviation oil production from microwave-assisted pyrolysis of polystyrene were performed. The total energy efficiency, recovered energy efficiency, unitary cost, unitary energy economic cost, relative cost difference, and energy economic factor were detailed. And the effects of microwave power, pyrolysis temperature, microwave absorbent loading, and microwave absorbent type on these parameters were covered. It was found that pyrolysis temperature has the most significant effect on the unitary cost and unitary energy economic cost of aviation oil, and-microwave absorbent type has a significant influence on energy economic factor during the whole microwave-assisted pyrolysis process. The optimum reaction conditions at the tonnage system for pyrolysis of 1 t polystyrene were microwave power of 650 W, pyrolysis temperature of 460 ℃, and silicon carbide (microwave absorbent) at a loading of 2 t (twice than feedstock loading). At these optimal conditions, the total energy efficiency, recovered energy efficiency, unitary cost, unitary energy economic cost, relative cost difference, and energy economic factor were 62.78%, 96.51%, 3.21 × 10^(4) yuan·t^(-1), 779 yuan·GJ^(-1), 1.49, and 71.02%, respectively.

关键词： energy analysis economic analysis microwave-assisted pyrolysis polystyrene aviation oil

Optimising multi-vent module-based adaptive ventilation using a novel parameter for improved indoor air quality and health protection

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第1期17卷 113-130页

作者： Haotian Zhang Xiaoxiao Ding Weirong Zhang Weijia Zhang Yingli Xuan Key Laboratory of Green Built environment and energy Efficient technology Beijing University of TechnologyBeijing 100124China Department ofArchitecture TokyoPolytechnic UniversityTokyoJapan

As infectious respiratory diseases are highly transmissible through the air,researchers have improved traditional total volume air distribution systems to reduce infection ***-vent module-based adaptive ventilation(MAV)is a novel ventilation type that facilitates the switching of inlets and outlets to suit different indoor scenarios without changing ductwork ***,little research has evaluated MAV module sizing and air velocity selection,both related to MAV system efficiency in removing contaminants and the corresponding level of protection for occupants in the ventilated ***,the module-source offset ratio(MSOR)is proposed,based on the MAV module size and its distance from an infected occupant,to inform selection of optimal MAV module *** fluid dynamics simulations illustrated contaminant distribution in a two-person MAV equipped *** phase particles modelled respiratory contaminants from the infected occupant,and contaminant concentration distributions were compared under four MAV air distribution layouts,three air velocities,and three module sizes considered using the *** indicate that lower air velocities favour rising contaminant levels,provided the ventilation rate is *** contaminant discharge can be achieved when the line of outlets is located directly above the infected *** this parameter to guide MAV system design,85.7% of contaminants may be rendered harmless to the human body within 120 s using the default air vent layout.A more appropriate supply air velocity and air vent layout increases this value to 91.4%.These results are expected to inform the deployment of MAV systems to reduce airborne infection risk.

关键词： multi-vent module-based adaptive ventilation computational fluid dynamics indoor air quality infection control

High-Performance All-Printed Flexible Micro-Supercapacitors with Hierarchical Encapsulation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

energy & environmental Materials 2024年第4期7卷 262-268页

作者： Yuhang Yuan Wei Yuan Yaopeng Wu Xuyang Wu Xiaoqing Zhang Simin Jiang Bote Zhao Yu Chen Chenghao Yang Liangxin Ding Zhenghua Tang Yingxi Xie Yong Tang School of Mechanical & Automotive Engineering South China University of Technology School of environment and energy South China University of Technology School of Chemistry and Chemical Engineering South China University of Technology

Printed micro-supercapacitors (MSCs) have shown broad prospect in flexible and wearable *** of previous studies focused on printing the electrochemically active materials paying less attention to other key components like current collectors and *** study presents an allprinting strategy to fabricate in-plane flexible and substrate-free MSCs with hierarchical encapsulation.

关键词： all-printing flexible hierarchical encapsulation micro-supercapacitors substrate-free

Experimental Investigation on Solution Regeneration Performance and Coefficients in Full-Open System for Heat and Water Recovery of Flue Gas

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1094-1108页

作者： WEI Hongyang HUANG Shifang MA Yuxin CHEN Bo SUN Li ZHANG Xiaosong School of energy and environment Southeast UniversityNanjing210096China MOE Engineering Research Center for Building energy Equipment&environment Southeast UniversityNanjing210096China Jiangsu Frontier Electric technology Co. LtdNanjing211106China

The recovery of heat and water from low-grade flue gas is of considerable importance for energy conservation and environmental *** the full-open absorption heat pump shows promise as a means of achieving heat and water recovery,the lack of research on heat and mass transfer performance of open-type solution evaporation regeneration represents a significant impediment to its design and *** paper experimentally investigates the regeneration performance of an open-type spaying tower equipped with ceramic structured *** different regeneration modes are proposed,namely ambient air receiver mode and flue gas receiver mode,to utilize air or low-grade flue gas as a driving *** impact of different input parameters on the regeneration characteristics,including heat transfer capacity,water removal rate,thermal efficiency,and humidity effectiveness,are *** findings indicate that the enhancement of regeneration can be achieved through the increase of solution flow rate,solution temperature,and flue gas flow rate in both regeneration ***,high solution concentration and flue gas humidity ratio can weaken water removal rates and reduce thermal *** the regeneration of CaCl_(2)-H_(2)O with a concentration of55%,flue gas around 200℃with a humidity ratio below 44 g/kg can successfully drive the solution regeneration *** the solution concentration or flue gas humidity ratio continues to rise,additional energy is necessary for ***,the coupled heat and mass transfer coefficients are fitted,which can contribute to the design and optimization of the open-type regenerator.

关键词： heat and water recovery solution regeneration flue gas regeneration performance coefficient

维普期刊数据库

Furan-derived Schiff base covalent adaptable thermosets with recyclability and anti-flammability

在线全文

学校读者我要写书评

暂无评论

Green Chemical Engineering 2024年第3期5卷 364-373页

作者： Ping Zhang Shuyu Jia Ruishi Xie Lin Chen Ying Xiong State Key Laboratory of environment-friendly energy Materials School of Materials Science and Engineering Southwest University of Science and Technology

Conventional thermosetting polymers, mostly derived from nonrenewable petroleum resources, are not reprocessable and recyclable due to their highly cross-linked three-dimensional networks and face the disadvantage of high flammability. To solve these issues, in this study, we synthesized a novel Schiff base covalent adaptable thermoset from a furan-derived tri-aldehyde monomer(TMFP) and a furan-derived di-amine monomer(DFDA).The as-prepared TMFP-DFDA-Vitrimer exhibited superior anti-flammability with a high limiting oxygen index(LOI) of 35.0% and a UL-94 V-0 rating, which was attributed to the excellent charring ability. Additionally, TMFPDFDA-Vitrimer could also be conveniently recycled by chemical decomposition under a mixed hydrochloric acid/tetrahydrofuran(HCl/THF) solution. After recycling for 5 times, the thermal, mechanical, and flame retardant properties of the recycled TMFP-DFDA-Vitrimer retained almost unchanged compared to the original one. This work provides a prime instance to develop advanced thermosetting polymers from abundant furan-based compounds.

关键词： Furan-based compounds Vitrimer Recyclability Flame retardancy

Low-temperature NH_(3) abatement via selective oxidation over a supported copper catalyst with high Cu^(+) abundance

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第9期143卷 12-22页

作者： Zhiming Yang Lin Peng Leneng Yang Mingli Fu Daiqi Ye Peirong Chen Guangdong Provincial Key Laboratory of Atmospheric environment and Pollution Control National Engineering Laboratory for VOCs Pollution Control Technology and EquipmentSchool of Environment and EnergySouth China University of TechnologyGuangzhou 510006China Guangdong Chengyi environmental technology Corp. Shaoguan 512158China

Selective catalytic NH_(3)-to-N_(2) oxidation(NH_(3)-SCO)is highly promising for abating NH_(3) emissions slipped from stationary flue gas after-treatment *** practical application,however,is limited by the non-availability of low-cost catalysts with high activity and N_(2) ***,using defect-rich nitrogen-doped carbon nanotubes(NCNT-AW)as the support,we developed a highly active and durable copper-based NH_(3)-SCO catalyst with a high abundance of cuprous(Cu^(+))*** obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T_(50)(*** temperature to reach 50% NH_(3) conversion)of 174℃ in the NH_(3)-SCO reaction,which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs(OCNTs)or NCNT with less surface defects,but also those most active Cu catalysts in open *** kinetics measurements and temperature-programmed surface reactions using NH_(3)as a probe molecule revealed that the NH_(3)-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction(i-SCR)route involving nitric oxide(NO)as a key *** to mechanistic investigations by X-ray photoelectron spectroscopy,Raman spectroscopy,and X-ray absorption spectroscopy,the superior NH_(3)-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and ***,surface defects promoted the anchoring of Cu O nanoparticles on N-containing sites and,thereby,enabled efficient electron transfer from N to Cu O,increasing significantly the fraction of SCR-active Cu^(+)sites in the *** study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu^(+)-rich Cu catalysts for efficient abatement of slip NH_(3)emissions via selective oxidation.

关键词： NH_(3)-SCO XANES Localized etching N-doping N_(2) selectivity i-SCR

维普期刊数据库