检索结果-南通市图书馆

Progress in Natural Science:Materials International 2024年第3期34卷 606-613页

作者： Muhammad Zubair Khan Amjad Hussain Seung-Bok Lee Tak-Hyoung Lim Rak-Hyun Song Department of Materials Science & engineering Pak-Austria Fachhochschule: Institute of Applied Sciences and Technology Hydrogen energy Research Division Korea Institute of Energy Research Department of Advanced energy and system engineering Korea University of Science and Technology (UST)

In the present study, the operational lifetime of a solid oxide fuel(SOFC) short stack is predicted by investigating the performance degradation of both the short stack and its cells throughout 1000 h at 800°C. The short stack and integral cell voltages are continuously measured during the long-term test, with electrochemical impedance spectroscopy(EIS) conducted every 200 h. The short stack voltage decreased rapidly for the initial 200–300 h and afterwards, it decreased at a slow rate due to the increase in the Ohmic and polarization resistances in the same manner. Scanning electron microscopy results show that there is no delamination or cracking among constituent layers of the short-stack cells. The single degradation effects of the Ni coarsening in the anode, cation migration and surface segregation in cathode and oxide scale growth in metallic interconnect mesh are successfully integrated into a comprehensive lifetime prediction model. The experimentally measured voltage degradation data of the short stack fits well with the developed mathematical model and allows the successful prediction of the lifetime up to 50,000 h.

关键词： Degradation Impedance Lifetime SOFC Stack

Physics of cavitation near particles

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第1期36卷 102-118页

作者： Jia-xin Yu Xiao-yu Wang Jun-wei Shen Jin-sen Hu Xiang-qing Zhang Da-qing He Yu-ning Zhang Key Laboratory of Power Station energy Transfer Conversion and system(Ministry of Education) School of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing102206China

The combined effect of cavitation and silt abrasion presents a great challenge and threat to secure the operation and the efficiency of hydraulic machineries working in sediment-laden *** present paper critically reviews the current research progress on the interaction mechanisms of the bubbles and the ***,the analytical models including boundary treatment methods for predicting the jet dynamics of the bubble collapse near particles are ***,the bubble collapsing dynamics,jet dynamics and shock wave characteristics near particles are revealed both experimentally and ***,the bubble-particle-wall system is investigated with a focus on microjets.

关键词： Cavitation bubble particle jet shock wave

Numerical investigations of the interactions between bubble induced shock waves and particle based on OpenFOAM

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第2期36卷 355-362页

作者： Jia-xin Yu Jin-sen Hu Yu-hang Liu Yi-fan Liu Dan Gao Yu-ning Zhang Key Laboratory of Power Station energy Transfer Conversion and system Ministry of EducationSchool of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing102206China

The presence of particles and the shock waves generated by the cavitation bubbles can significantly affect the safety and the performance of hydrodynamic *** the present paper,the shock waves generated by cavitation bubble collapsing near the particle are numerically investigated based on the OpenFOAM together with the numerical schlieren for the shock wave *** numerical results reveal that the stand-off distance is one of the paramount factors affecting the interactions between the particle and the shock *** different kinds of shock waves(e.g.,bubble-inception,jet formation,particle reflected and jet-split shock waves)are observed during the bubble collapsing near the *** stand-off distance smaller than 0.5 or larger than 1.1,the maximum pressure at particle surface generated by the bubble growth can surpass those of the collapse stage.

关键词： Particle-bubble interaction shockwaves jetdynamics

Thermo-Flow Performances for the Main-Auxiliary Integrated Natural Draft Dry Cooling system

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1010-1025页

作者： ZHANG Zongyang HOU Yichen ZHOU Hanyu JIA He CHEN Lei KONG Yanqiang WANG Weijia YANG Lijun DU Xiaoze Key Laboratory of Power Station energy Transfer Conversion and system of Ministry of Education School of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing102206China

Recently,natural draft dry cooling system with the main-auxiliary integrated air-cooled heat exchangers in the up and lower layers,has drawn attention to the electric power *** research firstly develops two physical models for the integrated cooling system,namely Case A and Case *** Case A,the main air-cooled heat exchanger is arranged in the upper layer and the auxiliary air-cooled heat exchanger arranged in the lower layer,while in Case B,the two heat exchanger systems are arranged in the opposite *** then,directing at the engineering TMCR and TRL 1 working conditions,the unit-local-overall thermo-flow characteristics of Case A and Case B are obtained and compared by numerical *** findings show that,for the auxiliary air-cooled exchanger,Case A has obviously higher cooling performances than Case B,with the difference varying from 5.46%to 7.55%.Whereas,for the main air-cooled exchanger,Case B shows the recovered cooling performances,with the difference changing from 1.15%to 2.99%.Case A is preferably recommended to the engineering application in consideration of more strict cooling demand of the auxiliary cooling ***,this research will provide some theoretical guidelines for the design and construction of the main-auxiliary integrated natural draft dry cooling system.

关键词： integrated dry cooling system main air-cooled heat exchanger auxiliary air-cooled heat exchanger upper layer and lower layer thermo-flow performances

Experimental Study on the Molten Salt at Micron Scale during the Melting Process

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 70-85页

作者： TIAN Ziqian LIAO Zhirong XU Chao FANG Yongzhe JIANG Kaijun YUAN Mengdi Key Laboratory of Power Station energy Transfer Conversion and system Ministry of Education of ChinaSchool of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing 102206China

The investigation of the melting behaviors of the molten salt at micron scale during the melting process is critical for explaining the solid-liquid phase transition *** this paper,a novel experimental system and analysis method were proposed to study the melting process with three heating rates in the range of1-10℃/min of the solar salt at micron *** solid-liquid boundary morphology and phase transition kinetics of molten salt particles were focused ***,the correlations between liquid fraction,temperature and time under different heating rates were *** solid-liquid boundary morphology was depicted by the visualized experimental set-up,and the instantaneous liquid volume fraction during the non-isothermal phase transition was ***,the correlation between temperature and liquid volume fraction was proposed to reveal the evolution of the solid-liquid boundary with temperature at different heating ***,the non-isothermal phase transition kinetic equation was established by introducing a constant parameter(V_(a,b)),and more kinetic parameters such as 1g V_(a,b) and-lg V_(a,b)/b were *** results showed that the exponent b is not sensitive to the heating rate with a range of 3-5 for solar salt ***,the heating rate influences the value of V_(a,b) and presents a positive ***,the non-isothermal phase transition kinetic equations at different heating rates in the range of 1-10℃/min can be quickly predicted by the proposed improved experimental test *** study could fill the research insufficiency and provide significant guidance for future research on the solid-liquid transition mechanism of molten salts at micron scale.

关键词： molten salt non-isothermal phase transition solid-liquid boundary morphology liquid volume fraction micron scale melting process

Design method of multivariable PI controller for turboprop engine based on equivalent transfer function

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第9期37卷 237-260页

作者： Shancheng LI Yong WANG Haibo ZHANG Jiangsu Province Key Laboratory of Aerospace Power system College of Energy and Power EngineeringNanjing University of Aeronautics and AstronauticsNanjing 210016China

Traditional centralized Proportional Integral(PI)controller design methods based on Equivalent Transfer Functions(ETFs)have poor decoupling effect in turboprop *** this paper,a centralized PI design method based on dynamic imaginary matrix and equivalent transfer function is ***,a method for solving equivalent transfer functions based on the dynamic imaginary matrix is proposed,which adopts dynamic imaginary matrix to describe the dynamic characteristics of the system,and obtains the equivalent transfer function based on the dynamic imaginary matrix ***,for the equivalent transfer function,a central-ized PI control gain is designed using the Taylor expansion ***,this paper further proves that the centralized PI design method proposed in this paper has integral ***-ering the impact of altitude and Mach number on turboprop engines,a linear feedforward control method based on the transfer function matrix is further proposed based on the centralized PI con-troller,and the stability of the entire comprehensive control method is ***,to ensure the safe and effective operation of the turboprop engine,a temperature and torque limiting protection controller is designed for the turboprop *** results show that the centralized PI con-troller design method and linear feedforward control method proposed can effectively improve the control quality of turboprop engine control systems.

关键词： Multivariable control sys-tems Equivalent transfer function Disturbance compensation control Control parameter design Turboprop engine control

A Comprehensive Review of Thermal Performance Improvement of High-Temperature Heat Pipes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 625-647页

作者： CHEN Qihan ZHOU Jingzhi ZHOU Guohui CHENG Keyong HUAI Xiulan WEI Gaosheng School of energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing100096China Nanjing Institute of Future energy system Nanjing211135China Institute of engineering Thermophysics Chinese Academy of SciencesBeijing100190China

energy efficiency issues are being focused on the growing concern of global warming and environmental *** high-temperature heat pipe(HTHP) is an effective and environmental-friendly heat transfer device employed in many industries,including solar power generation,high-temperature flue gas waste heat recovery,industrial furnaces,nuclear industries,and *** a critical factor in HTHPs,thermal performance is mainly introduced in the entire *** date,most reviews have been published concerning one or several application ***,to the best of authors' knowledge,it is hard to find a review discussing how to improve the thermal performance of HTHPs ***,the impact on the performance of three main components of HTHPs over the past 30 years is introduced:the working fluid,the HTHP structure,and the wick ***,it is a considerable review of the optimal operating conditions for each direction,and we expect this paper contribute to improving the thermal performance of ***,current numerical simulations and theoretical research on the heat transfer limit of HTHPs are *** significant hypotheses used in numerical simulations and the present theoretical studies are compiled ***,some potential future directions and tentative suggestions for HTHP research are put forward.

关键词： high-temperature heat pipe review alkali metal heat pipe thermal performance

Examining the Use of Scott’s Formula and Link Expiration Time Metric for Vehicular Clustering

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第3期138卷 2421-2444页

作者： Fady Samann Shavan Askar Department of energy engineering Technical College of EngineeringDuhok Polytechnic UniversityDuhok42001Iraq Department of Information system engineering Technical College of EngineeringErbil Polytechnic UniversityErbil44001Iraq

Implementing machine learning algorithms in the non-conducive environment of the vehicular network requires some adaptations due to the high computational complexity of these algorithms.K-clustering algorithms are simplistic,with fast performance and relative ***,their implementation depends on the initial selection of clusters number(K),the initial clusters’centers,and the clustering *** paper investigated using Scott’s histogram formula to estimate the K number and the Link Expiration Time(LET)as a clustering *** traffic flows were considered for three maps,namely Highway,Traffic Light junction,and Roundabout junction,to study the effect of road layout on estimating the K number.A fast version of the PAM algorithm was used for clustering with a modification to reduce time *** Affinity propagation algorithm sets the baseline for the estimated K number,and the Medoid Silhouette method is used to quantify the ***++,Veins,and SUMO were used to simulate the traffic,while the related algorithms were implemented in *** Scott’s formula estimation of the K number only matched the baseline when the road layout was ***,the clustering algorithm required one iteration on average to converge when used with LET.

关键词： Clustering vehicular network Scott’s formula FastPAM

Assessment and Enhancement of FRC of Power systems Considering Thermal Power Dynamic Conditions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and energy systems 2024年第4期10卷 1371-1383页

作者： Feng Hong Yalei Pang Weiming Ji Lu Liang Fang Fang Junhong Hao Jizhen Liu State Key Laboratory of Alternate Electric Power system with Renewable energy Sources and School of Control and Computer engineering North China Electric Power UniversityBeijing 102206China State Key Laboratory of Alternate Electric Power system with Renewable energy Sources School of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing 102206China

Frequency stability and security have been a vital challenge as large-scale renewable energy is integrated into power *** contrast,the proportion of traditional thermal power units decreases during the decarbonization transformation process,resulting in poor frequency *** paper aims to explore the potential of frequency regulation support,dynamic assessment,and capacity promotion of thermal power plants in the transition *** the dynamic characteristics of the main steam working fluid under different working conditions,a nonlinear observer is constructed by extracting the main steam pressure and valve opening degree *** real-time frequency modulation capacity of thermal power units can provide a dynamic state for the power grid.A dynamic adaptive modification for primary frequency control(PFC)of power systems,including wind power and thermal power,is proposed and *** power dynamic allocation factor is adaptively optimized by predicting the speed droop ratio,and the frequency modulation capability of the system is improved by more than 11%under extreme ***,through the Monte Carlo simulation of unit states of the system under various working conditions,the promotion of the frequency regulation capacity with high wind power penetration(WPP)is verified.

关键词： Dynamic evaluation frequency regulation power system predictive modeling wind penetration

Thermal Property Enhancement of a Novel Shape-Stabilized Sodium Acetate Trihydrate-Acetamide/Expanded Graphite-Based Composite Phase Change Material

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第4期33卷 1564-1576页

作者： AN Zhoujian HOU Wenjie DU Xiaoze HUANG Zhongzheng MOMBEKI PEA Hamir Johan ZHANG Dong LIU Xiaomin College of energy and Power engineering Lanzhou University of TechnologyLanzhou730050China Key Laboratory of Multi-supply system with Solar energy and Biomass of Gansu Province Lanzhou730050China Gansu Natural energy Research Institute Lanzhou730046China

Phase change materials(PCMs)are a kind of highly efficient thermal storage materials which have a bright application prospect in many fields such as energy conservation in buildings,waste heat recovery,battery thermal management and so *** inorganic hydrated salt PCMs have received increasing attention from researchers due to their advantages of being inexpensive and ***,inorganic hydrated salt PCMs are still limited by the aspects of inappropriate phase change temperature,liquid phase leakage,large supercooling and severe phase separation in the application *** this work,sodium acetate trihydrate was selected as the basic inorganic PCM,and a novel shape-stabilized composite phase change material(CPCM)with good thermal properties was prepared by adding various functional *** first,the sodium acetate trihydrate-acetamide binary mixture was prepared and the melting point was adjusted using *** the binary mixture was incorporated into expanded graphite to synthesize a novel shape-stabilized *** thermophysical properties of the resultant shape-stabilized CPCM were systematically *** microscopic morphology and chemical structure of the obtained shape-stabilized CPCM were characterized and *** experiment results pointed out that acetamide could effectively lower the melting point of sodium acetate *** obtained shape-stabilized CPCM modified with additional 18%(mass fraction)acetamide and 12%(mass fraction)expanded graphite exhibited good shape stability and thermophysical characteristics:a low supercooling degree of 1.75℃and an appropriate melting temperature of 40.77℃were obtained;the latent heat of 151.64 kJ/kg and thermal conductivity of 1.411 W/(m·K)were also ***,after 50accelerated melting-freezing cycles,the obtained shape-stabilized CPCM represented good thermal reliability.

关键词： sodium acetate trihydrate melting point modification agent expanded graphite shape stability thermal conductivity enhancement