检索结果-南通市图书馆

The Conversion of Non-Dispersed Polymers into Low-Potassium Anti-Collapse drilling Fluids

Fluid Dynamics & Materials Processing 2024年第2期20卷 325-335页

作者： Hao Hu Jian Guan Shanfa Tang Jialuo Rong Yuanpeng Cheng School of Petroleum engineering Yangzte UniversityWuhan430100China Hubei Key Laboratory of Oil and Gas drilling and production engineering Yangtze UniversityWuhan430100China School of Petroleum engineering Yangtze UniversityNational Engineering Research Center for Oil&Gas Drilling and Completion TechnologyWuhan430100China engineering technology research institute of PetroChina Great Wall drilling engineering Co. Ltd.Panjin124000China

Different drillingﬂuid systems are designed according to mineral composition,lithology and wellbore stability of different strata.In the present study,the conversion of a non-dispersed polymer drillingﬂuid into a low potas-sium anti-collapsing drillingﬂuid is investigated.Since the two drillingﬂuids belong to completely different types,the key to this conversion is represented by new inhibitors,dispersants and water-loss agents by which a non-dispersed drillingﬂuid can be turned into a dispersed drillingﬂuid while ensuring wellbore stability and reason-able rheology(carrying sand—inhibiting cuttings dispersion).In particular,the(QYZ-1)inhibitors and(FSJSS-2)dispersants are used.The former can inhibit the hydration expansion capacity of clay,reduce the dynamic shear force and weaken the viscosity;the latter can improve the sealing effect and reduce theﬁltrate loss.The results have shown that after adding a reasonable proportion of these substances(QYZ-1:FSJSS-2)to the non-dispersed polymer drillingﬂuid,while the apparent viscosity,plastic viscosity,structural viscosity andﬂuidity index under-went almost negligible changes,the dynamic plastic ratio increased,and theﬁltration loss decreased signiﬁcantly,thereby indicating good compatibility.According to the tests(conducted in the Leijia area),the density was 1.293 g/cm3,and after standing for 24 h,the SF(static settlement factor)was 0.51.Moreover,theﬁltration loss was reduced to 4.0 mL,the rolling recovery rate reached 96.92%,with excellent plugging and anti-collapse performances.

关键词： Non-dispersed polymer drilling fluid low potassium anti-collapsing drilling fluid drilling fluid conversion drilling fluid reuse filter vector

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fracture sealing performance of granular lost circulation materials at elevated temperature:A theoretical and coupled CFD-DEM simulation study

引用

Petroleum Science 2024年第1期21卷 567-581页

作者： Chong Lin Qi-Cong Xu Lie-Xiang Han Gao Li Hai He Hong-Ling Zhou Ji-Ping She CCDC drilling&production technology research institute Guanghan618300SichuanChina State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500SichuanChina College of Materials Science and engineering Chongqing UniversityChongqing400044China State Key Lab of Oil and Gas Reservoir Geology and Exploitation(Chengdu University of technology) Chengdu610059SichuanChina College of Energy Chengdu University of TechnologyChengdu610059SichuanChina

Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulation.However,conventional LCMs seem ineffective in high-temperature formations.This may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature conditions.To understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in fractures.We summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling fluid.We conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing temperatures.The results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid viscosity.Smaller,softer,and less frictional LCM particles have lower bridging probability and slower bridging initiation.Smaller particles tend to form dual-particle bridges rather than single-particle bridges.These result in a deeper,tighter,but unstable sealing zone.Reduced drilling fluid viscosity leads to faster and shallower sealing zones.

关键词： Geothermal well drilling HTHP formationLost circulation material CFD-DEM Fracture sealing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Review of construction and demolition waste management tools and frameworks with the classification,causes,and impacts of the waste

引用

Waste Disposal and Sustainable Energy 2024年第1期6卷 95-121页

作者： Dewan Sabbir Ahammed Rayhan Iftekhar Uddin Bhuiyan institute of Appropriate technology(IAT) Bangladesh University of Engineering and Technology(BUET)DhakaBangladesh Department of Industrial and production engineering(IPE) National Institute of Textile Engineering and Research(NITER)NayarhatSavarDhakaBangladesh

This review looks over the current construction and demolition waste management(C&DWM)situations by scrutinizing the definition,classification,components,compositions,generated sources and causes,impacts of generated construction and demolition wastes(C&DWs),waste management hierarchy(WMH),3R principles(Reduce,Reuse,and Recycle),Circular Economy(CE),frameworks,tools,and approaches of C&DWM.After reviewing the literature this study contributes to the literature by the following means:(a)suitable working definitions of C&DW and C&DWM are provided,(b)an expanded WMH for construction and demolition operations is presented,(c)frameworks of C&DWM are identified and listed as follows:frameworks based on WMH,including 3R principles and CE concept,frameworks focusing on the quantification,estimation,and prediction of generated C&DW,frameworks focusing on effective and sustainable C&DWM,frameworks focusing economic,social,and environmental performance assessment,frameworks based on multi-criteria analysis(MCA),frameworks based on post-disaster recovery period,and other miscellaneous frameworks,and(d)four categories of tools utilized in C&DWM are identified and explained,namely,approaches employed in C&DWM,information technology(IT)tools employed in C&DWM,multi-criteria decision analysis(MCDA)tools employed in C&DWM,and C&DWM technologies.Moreover,this study also found that CE,and green rating system(GRS)are widely used approaches,Building Information Modeling(BIM),Radio Frequency Identification(RFID),Geographic Information System,and Big Data are the extensively used IT tools,Analytical Hierarchy Process,FUZZY,TOPSIS(Technique for Order Preference by Similarity to the Ideal Solution),Weighted Summation,Elimination and Choice Expressing the Reality II,Elimination and Choice Expressing the Reality III,Evaluation of Mixed Data,and REGIME(REG)are the widely used MCA tools in C&DWM,and Prefabricated Construction and Modular Construction are broadly used C&DWM technologies.Furthermore,it has been observed that the application of

关键词： Construction and demolition waste Construction and demolition waste management Frameworks and tools 3R principles(Reduce,Reuse,&Recycle) Waste management hierarchy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Influence of Acid on the RockMechanical Characteristics of Deep Shale in theWujiaping Formation

引用

Energy engineering 2024年第1期121卷 27-42页

作者： Hao Zhang Yan Zhang Wei Liu Ximin Zhang Xiang Liu School of Petroleum engineering Yangtze UniversityWuhan430100China Petroleum engineering technology research institute Jianghan Oilfield Branch of SinopecWuhan430035China drilling technology research institute Sinopec Shengli Oilfield Service CorporationDeyang618000China

The microscopic characteristics and mechanical properties of rocks change after the action of acid on deep shale,which affects the fracturing effect.Accordingly,we designed and conducted indoor experiments related to the changes in macro and microscopic characteristics after the interaction of acid with the shale of Wujiaping Formation,based on which the characteristic law of fracture volume modification after acid fracturing was studied using numerical simulation.The results demonstrate that the pores and fractures are enlarged and the structure is significantly loosened after the acid immersion.And a 15%concentration of hydrochloric acid can effectively dissolve shale.Furthermore,the degree of acid-etching reaction is highly variable because of the different carbonate content,which reveals the strong inhomogeneity of the shale system in the Wujiaping Group reservoir section.After the acid interacted with the shale rock samples,the triaxial compressive strength,elastic modulus,and Poisson’s ratio of shale decreased.Moreover,the evaluation of the effect after acid fracturing simulated by fracturing software revealed that the smaller the value of elastic modulus in shale-based reservoirs,the more favorable the fracture volume modification.This discovery not only provides a theoretical basis for the expansion and extension patterns of acid-fracturing in carbonaceous shale formations but also offers research methods and theoretical insights for the fundamental exploration of other deep-seated oil and gas resources.

关键词： Shale acid fracturing macro characteristics microscopic characteristics mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A novel responsive stabilizing Janus nanosilica as a nanoplugging agent in water-based drilling fluids for exploiting hostile shale environments

引用

Petroleum Science 2024年第2期21卷 1190-1210页

作者： Alain Pierre Tchameni Lv-Yan Zhuo Lesly Dasilva Wandji Djouonkep Robert Dery Nagre Lu-Xin Chen Lin Zhao Chao Ma Bin-Qiang Xie College of Petroleum engineering Yangtze UniversityWuhan430100HubeiChina Key Laboratory of drilling and production engineering for Oil and Gas HubeiChina Lost Circulation Control Laboratory National Engineering Laboratory for Petroleum Drilling EngineeringYangtze UniversityWuhan430100HubeiChina College of Petroleum engineering Shandong Institute of Petroleum and Chemical TechnologyDongying257061ShandongChina Petroleum Engineer research institute of Petrochina Dagang Oilfield Tianjin300280China Department of Chemical engineering Kumasi Technical UniversityP.O.Box 854KumasiGhana

Thermo-responsive nanocomposites have recently emerged as potential nanoplugging agents for shale stabilization in high-temperature water-based drilling fluids(WBDFs). However, their inhibitory properties have not been very effective in high-temperature drilling operations. Thermo-responsive Janus nanocomposites are expected to strongly interact with clay particles from the inward hemisphere of nanomaterials, which drive the establishment of a tighter hydrophobic membrane over the shale surface at the outward hemisphere under geothermal conditions for shale stabilization. This work combines the synergistic benefits of thermo-responsive and zwitterionic nanomaterials to synchronously enhance the chemical inhibitions and plugging performances in shale under harsh conditions. A novel thermoresponsive Janus nanosilica(TRJS) exhibiting zwitterionic character was synthesized, characterized,and assessed as shale stabilizer for WBDFs at high temperatures. Compared to pristine nanosilica(Si NP)and symmetrical thermo-responsive nanosilica(TRS), TRJS exhibited anti-polyelectrolyte behaviour, in which electrolyte ions screened the electrostatic attraction between the charged particles, potentially stabilizing nanomaterial in hostile shaly environments(i.e., up to saturated brine or API brine). Macroscopically, TRJS exhibited higher chemical inhibition than Si NP and TRS in brine, prompting a better capability to control pressure penetration. TRJS adsorbed onto the clay surface via chemisorption and hydrogen bonding, and the interactions became substantial in brine, according to the results of electrophoretic mobility, surface wettability, and X-ray diffraction. Thus, contributing to the firm trapping of TRJS into the nanopore structure of the shale, triggering the formation of a tight hydrophobic membrane over the shale surface from the outward hemisphere. The addition of TRJS into WBDF had no deleterious effect on fluid properties after hot-treatment at 190℃, implying that TRJS could find potential use as a shale stabilizer

关键词： Janus nanosilica Thermo-responsive copolymer Anti-polyelectrolyte effect Shale stabilizer Inhibition Plugging drilling fluid

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A reweighted damped singular spectrum analysis method for robust seismic noise suppression

引用

Petroleum Science 2024年第3期21卷 1671-1682页

作者： Wei-Lin Huang Yan-Xin Zhou Yang Zhou Wei-Jie Liu Ji-Dong Li State Key Laboratory of Petroleum Resources and engineering China University of Petroleum (Beijing) SINOPEC Petroleum Exploration and production research institute SINOPEC Geophysical research institute

(Multichannel) Singular spectrum analysis is considered as one of the most effective methods for seismic incoherent noise suppression. It utilizes the low-rank feature of seismic signal and regards the noise suppression as a low-rank reconstruction problem. However, in some cases the seismic geophones receive some erratic disturbances and the amplitudes are dramatically larger than other receivers. The presence of this kind of noise, called erratic noise, makes singular spectrum analysis(SSA) reconstruction unstable and has undesirable effects on the final results. We robustify the low-rank reconstruction of seismic data by a reweighted damped SSA(RD-SSA) method. It incorporates the damped SSA, an improved version of SSA, into a reweighted framework. The damping operator is used to weaken the artificial disturbance introduced by the low-rank projection of both erratic and random noise. The central idea of the RD-SSA method is to iteratively approximate the observed data with the quadratic norm for the first iteration and the Tukeys bisquare norm for the rest iterations. The RD-SSA method can suppress seismic incoherent noise and keep the reconstruction process robust to the erratic disturbance. The feasibility of RD-SSA is validated via both synthetic and field data examples.

关键词： Singular spectrum analysis Damping operator Seismic erratic noise Seismic signal processing Robust low-rank reconstruction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Optimized tillage methods increase mechanically transplanted rice yield and reduce the greenhouse gas emissions

引用

Journal of Integrative Agriculture 2024年第4期23卷 1150-1163页

作者： Shuang Cheng Zhipeng Xing Chao Tian Mengzhu Liu Yuan Feng Hongcheng Zhang Jiangsu Key Laboratory of Crop Cultivation and Physiology/Jiangsu Co-innovation Center for Modern production technology of Grain Crops/research institute of Rice Industrial engineering technology Yangzhou UniversityYangzhou 225009China

Biaxia lrotary tillage in dryland(DBRT)can complete biaxial rotary tillage with straw incorporation,secondary suppression,and ditching,and it has been previously studied in direct-seeded rice and wheat.However,the effects of DBRT on the mechanically transplanted rice yield and greenhouse gas emissions remain unclear.To evaluate the effects of DBRT on improving the food security of mechanically transplanted rice and reducing the greenhouse gas emissions,we conducted an experiment for two years with wheat straw incorporation.Three tillage methods were set up:DBRT,uniaxial rotary tillage in dryland and paddy(DPURT),and uniaxial rotary tillage in paddy(PURT).The results showed that compared with DPURT and PURT,DBRT increased the yield of machine-transplanted rice by 7.5-11.0%and 13.3-26.7%,respectively,while the seasonal cumulative CH_(4) emissions were reduced by 13.9-21.2%and 30.2-37.0%,respectively,and the seasonal cumulative N_(2)O emissions were increased by 13.5-28.6%and 50.0-73.1%,respectively.Consequently,DBRT reduced the global warming potential by 10.7-15.5%and 23.7-28.6%,respectively,andtheyield-scaledglobalwarmingpotentialby18.2-21.8%and36.4-39.3%,respectively,compared to DPURT and PURT.These results were mainly related to the fact that DBRT significantly reduced soil bulk density and increased soil redox potential(Eh).Therefore,implementing DBRT in machine-transplanted rice fields is feasible,which cannot only increase the rice yield,but also reduce the greenhouse gas emissions.

关键词： integrated tillage rice grain yield CH_(4) N_(2)O

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

引用

Nano-Micro Letters 2024年第8期16卷 268-308页

作者： Yiding Li Li Wang Youzhi Song Wenwei Wang Cheng Lin Xiangming He institute of Nuclear and New Energy technology Tsinghua UniversityBeijing 100084People’s Republic of China National engineering research Center of Electric Vehicles Beijing Institute of Technology(BIT)Beijing 100081People’s Republic of China Shenzhen Automotive research institute of BIT(Shenzhen research institute of National engineering research Center of Electric Vehicles) Shenzhen 518118People’s Republic of China

The battery technology progress has been a contradictory process in which performance improvement and hidden risks coexist.Now the battery is still a“black box”,thus requiring a deep understanding of its internal state.The battery should“sense its internal physical/chemical conditions”,which puts strict requirements on embedded sensing parts.This paper summarizes the application of advanced optical fiber sensors in lithium-ion batteries and energy storage technologies that may be mass deployed,focuses on the insights of advanced optical fiber sensors into the processes of one-dimensional nano-micro-level battery material structural phase transition,electrolyte degradation,electrode-electrolyte interface dynamics to three-dimensional macro-safety evolution.The paper contributes to understanding how to use optical fiber sensors to achieve“real”and“embedded”monitoring.Through the inherent advantages of the advanced optical fiber sensor,it helps clarify the battery internal state and reaction mechanism,aiding in the establishment of more detailed models.These advancements can promote the development of smart batteries,with significant importance lying in essentially promoting the improvement of system consistency.Furthermore,with the help of smart batteries in the future,the importance of consistency can be weakened or even eliminated.The application of advanced optical fiber sensors helps comprehensively improve the battery quality,reliability,and life.

关键词： Smart battery Advanced embedded optical fiber sensor Battery internal physical/chemical state Quality-reliability-life characteristic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Insight into the capacity degradation and structural evolution of single-crystal Ni-rich cathodes

引用

Journal of Energy Chemistry 2024年第8期95卷 68-76页

作者： Xiaodong Zhang Jiao Lin Ersha Fan Qingrong Huang Su Ma Renjie Chen Feng Wu Li Li Beijing Key Laboratory of Environmental Science and engineering School of Materials Science and Engineering Beijing Institute of Technology Collaborative Innovation Center of Electric Vehicles in Beijing Advanced technology research institute Beijing Institute of Technology

Single-crystal Ni-rich cathodes are a promising candidate for high-energy lithium-ion batteries due to their higher structural and cycling stability than polycrystalline materials. However, the phase evolution and capacity degradation of these single-crystal cathodes during continuous lithation/delithation cycling remains unclear. Understanding the mapping relationship between the macroscopic electrochemical properties and the material physicochemical properties is crucial. Here, we investigate the correlation between the physical-chemical characteristics, phase transition, and capacity decay using capacity differential curve feature identification and in-situ X-ray spectroscopic imaging. We systematically clarify the dominant mechanism of phase evolution in aging cycling. Appropriately high cut-off voltages can mitigate the slow kinetic and electrochemical properties of single-crystal cathodes. We also find that second-order differential capacity discharge characteristic curves can be used to identify the crystal structure disorder of Ni-rich cathodes. These findings constitute a step forward in elucidating the correlation between the electrochemical extrinsic properties and the physicochemical intrinsic properties and provide new perspectives for failure analysis of layered electrode materials.

关键词： Capacity decay Differential capacity analysis Phase transition Single-crystal cathodes

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Surface morphologies of Mg-Gd alloy particle during its reactions with O_(2) and Teflon

引用

Defence technology（防务技术） 2024年第3期33卷 209-221页

作者： Yifan Li Hongtao Yang Aifeng Jiang Dongming Song Yanchun Li Department of Chemical engineering Nanjing University of Science and TechnologyNanjing 210097China Xi'an Modern Chemistry research institute Xi'an 710065China Southwest technology and engineering research institute Chongqing 400039China

Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than MTV.To further investigate the reaction of MGTV in air,it was investigated via thermo gravity-differential scanning calorimetry(TG-DSC).Meanwhile,the morphologies and element distributions on the alloy surface during the reaction of MGTV in air were investigated via scanning electronic microscope-mapping-electronic differential spectrometer.Meanwhile,a similar experimental protocol on the Mg-Gd alloy particle during oxidation was also applied.The results showed that owning to a protective oxide shell,the onset oxidation temperature of Mg-Gd alloy is higher than Mg.However,the onset oxidation temperature of the exceeded Mg-Gd alloy in MGTV is significantly lower than that of the exceeded Mg in MTV.It was due to the existence of GdOF,which could significantly lower the oxidation temperature of the exceeded fuel.Furthermore,a possible reaction mechanism was proposed.The fascinating oxidation properties of Mg-Gd alloy suggested its promising applications in energetic materials.

关键词： Mg-Gd alloy Energetic materials Morphology EDS GdOF

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：