检索结果-南通市图书馆

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew Shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China Institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore Institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

Fatigue Strength Analysis of Dissimilar Aluminum Alloy TIG Welds

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials science) 2025年第1期40卷 265-274页

作者： LIAO Xiangyun WANG Ruijie LIU Guoshou ZHAO Pinglin Faculty of Mechanical and Electrical engineering Kunming University of Science and TechnologyKunming 650500China Faculty of Civil engineering and Mechanics Kunming University of Science and TechnologyKunming 650500China

The constant amplitude loading fatigue tests were carried out on the 6061/7075 aluminum alloy TIG fillet welded lap specimens in this study,and the weld seam cross-section hardness was *** experimental results show that most specimens mainly failed at the 7075 side weld toes even though the base material tensile strength of 7075 is higher than that of *** maximum stress-strain concentration in the two finite element models is located at the 7075 side weld toe,which is basically consistent with the actual fracture *** weld zone on the 7075 side experiences severe material softening,with a large ***,the Vickers hardness value on the 6061 side negligibly changes and fluctuates around 70 *** obvious defects are found on the fatigue fracture,but a large number of secondary cracks *** germinate from the weld toe and propagate in the direction of the plate *** reinforcement has a serious impact on fatigue *** life will decrease exponentially as the weld reinforcement increases under low *** is found that the notch stress method can give a better fatigue life prediction for TIG weldments,and the errors of the predicted results are within the range of two factors,while the prediction accuracy decreases under low *** equivalent structural stress method can also be used for fatigue life prediction of TIG weldments,but the errors of prediction results are within the range of three factors,and the accuracy decreases under high stress.

关键词： TIG welding notch stress method equivalent structural stress method fatigue life finite element analysis

engineering nanoparticle structure at synergistic Ru-Na interface for integrated CO2 capture and hydrogenation

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 779-791页

作者： Hanzi Liu Ling Cen Xinlin Xie Lei Liu Zhao Sun Zhiqiang Sun Hunan engineering Research Center of Clean and Low-Carbon Energy Technology School of Energy Science and Engineering Central South University

The development of dual functional material for cyclic CO2capture and hydrogenation is of great significance for converting diluted CO2into valuable fuels,but suffers from kinetic limitation and deactivation of adsorbent and ***,we engineered a series of RuNa/γ-Al2O3materials,varying the size of ruthenium from single atoms to clusters/*** coordination environment and structure sensitivity of ruthenium were quantitatively investigated at atomic *** findings reveal that the reduced Ru nanoparticles,approximately 7.1 nm in diameter with a Ru-Ru coordination number of 5.9,exhibit high methane formation activity and selectivity at 340°*** Ru-Na interfacial sites facilitate CO2migration through a deoxygenation pathway,involving carbonate dissociation,carbonyl formation,and ***-situ experiments and theoretical calculations show that stable carbonyl intermediates on metallic Ru nanoparticles facilitate heterolytic C–O scission and C–H bonding,significantly lowering the energy barrier for activating stored CO2.

关键词： Carbon capture and utilization

Preparation and Performance of Ternary Early Strength Agent and Quercetin Composite Cement Sealing material

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials science) 2025年第1期40卷 130-140页

作者： LIU Jian CHEN Meiting JI Xiaoli XU Chao WANG Chunmei Department of Safety science and engineering Anhui University of Science and TechnologyHuainan 232001China Key Laboratory of Mine Safety and High Efficient Mining Jointly Built by Province and Education Ministry Anhui University of Science and TechnologyHuainan 232001China Department of Chemical engineering and Explosives Anhui University of Science and TechnologyHuainan 232001China

A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early *** optimum ratio of the three early-strengthening agents was determined as 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate by response surface *** effects of the ternary early-strengthening agent composed of calcium formate+triethanolamine(TEA)+lithium sulfate on cementitious pore sealing materials under the synergistic effect of quercetin were studied by means of the performance tests of compressive strength,fluidity,and setting time,and the microstructural characterizations of X-ray powder diffractometer(XRD),thermogravimetry(TG-DSC)and scanning electron microscopy(SEM).The study shows that the synergistic effect of ternary early-strengthening agent and quercetin forms a multi-performance composite admixture for cementitious *** best performance was obtained with the compounding scheme of 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate ternary early-strengthening agent and 0.05%*** compressive strength of 1,3,7,and 28 d are 94.8%,39.8%,42%,and 28%higher than those of the blank group,*** initial time and final setting time are 41 and 57 minutes,*** to the microscopic analysis,the network and fibrous C-S-H gels generated by ternary early-strengthening agents are attached to the surface promoted by quercetin,which forms skeleton support while thickening and solidifying the cement slurry,which enhances the early compressive strength of the cement-based materials.

关键词： sealing material ternary early-strengthening agent quercetin synergetic effect response surface methodology

Transforming waste particles into valuable adsorbents via amyloid-mediated molecular engineering

在线全文

学校读者我要写书评

暂无评论

science China Chemistry 2025年第1期68卷 317-328页

作者： Qingmin Yang Jian Zhao Yujia Zhang Xingyu Zhou Hao Ren Bowen Hu Zhongli Lei Lixin Chen Peng Yang School of material and Chemical engineering Bengbu University Anhui Provincial engineering Laboratory of Silicon-Based materials School of Chemistry and Chemical engineering Northwestern Polytechnical University Key Laboratory of Applied Surface and Colloid Chemistry Ministry of Education School of Chemistry and Chemical EngineeringShaanxi Normal University Xi'an Key Laboratory of Polymeric Soft Matter School of Chemistry and Chemical Engineering Shaanxi Normal University International Joint Research Center on Functional Fiber and Soft Smart Textile School of Chemistry and Chemical EngineeringShaanxi Normal University

The high-value utilization of industrial solid waste using a facile and eco-friendly process is of great interest and significance in reducing environmental pollution and developing a green circular economy. Herein, we propose an amyloid-mediated molecular engineering strategy to transform particulate waste into valuable adsorbents for metal ions. Our method has the advantage of aqueous solution fabrication under mild conditions without the use of high-temperature hydrothermal methods and toxic chemical reagents. Amyloid-mediated molecular engineering manipulates the phase transition of bovine serum albumin(BSA)on particulate waste surfaces, resulting in a remarkable ～3.1 times improvement in the adsorption capacity of fly ash, a typical industrial solid waste for gold ions after modification with the phase-transitioned BSA(PTB). The resultant adsorption ability was 69–1,980 times higher than those of conventional and emerging adsorbent materials such as ion exchange resins, activated carbon(AC), covalent organic frameworks(COFs), and metal-organic frameworks(MOFs). We further demonstrated the application of our PTB-modified materials in the recovery of precious metals from low-grade gold ore and electronic waste leachates. Consequently, this strategy could increase the value of waste materials nearly 27 times. In addition, this method is generally extendable to other conventional industrial adsorbents such as resin, clay, and Al2O3, and enhances their adsorption capabilities at least twofold. Overall, this work provides a simple and green approach for improving the adsorption performance of solid particles, and is expected to develop into a universal strategy for transforming waste particles into high-value-added products.

关键词： amyloid-like protein aggregates surface engineering fly ash solid waste adsorption

Li,Na,and Cs-based metal-organic frameworks for room temperature phosphorescence applications

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

science China Chemistry 2025年

作者： Jiaqi Ma Rui Feng Yanyuan Jia Mingshi Zhang Shuo Guo College of Chemistry and Chemical engineering Inner Mongolia University School of materials science and engineering Smart Sensing Interdisciplinary Science Center Nankai University & TKL of Metal and Molecule Based Material Chemistry Key Laboratory of Advanced Energy materials Chemistry (Ministry of Education) Nankai University Department of Chemistry and Biochemistry University of California San Diego

The conventional design of metal-organic frameworks (MOFs) with room-temperature phosphorescence (RTP) mostly relies on using heavy metals,as the heavy atom effect can effectively increase the efficiency of intersystem crossing (ISC) to get a better phosphorescence *** the first time,we reported the highly efficient RTP of a lithium-based MOF IMU-101 with a lifetime (τ) of 299 ms and a quantum yield (QY) of 4.91%.In addition,MOFs IMU-102 and IMU-103,with sodium and cesium as metal nodes,were successfully *** phosphorescence properties of this series of alkali metal MOFs were systematically studied and *** crystallography and computational calculation show that the mechanism for achieving RTP for this material lies in the ultrashort coordination bond of Li,which enables the reduction of non-radiative ***-101,as a cheap and environmentally friendly room-temperature phosphorescent material,has been further developed into composite polymer inks and bulk *** makes them promising for applications in anti-counterfeiting and information encryption.

关键词：

Synergistic effect of bonding heterogeneity and phonon localization in introducing excellent thermoelectric properties in layered heteroanionic NdZnSbO material

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 259-272页

作者： Da Wan Shuwei Tang Shulin Bai Xiaodong Li Peng Ai Wanrong Guo Tuo Zheng College of materials science and engineering Liaoning Technical University Faculty of Chemistry Northeast Normal University

Layered rare-earth metal oxides, harnessing the dual properties of oxides and two-dimensional layered materials, exhibit remarkable thermal stability and quantum confinement effects. Therefore, this work adopts the first-principles calculation combined with the Boltzmann transport theory to predict the thermoelectric properties of NdZnSbO compound. The coexistence of weak interlayer van der Waals interactions, robust intralayer ionic bonding, and partial covalent bonding leads to remarkable bonding heterogeneity, which engenders pronounced phonon scattering and imposes constraints on thermal transport along the out-of-plane direction. The weakened chemical bonds induced by the antibonding states, together with the rattling-like behavior of the Zn atom, culminate in the profound anharmonicity in the layered NdZnSbO compound. The weakening bond and heavy element contribute to the softness of phonon modes, which significantly diminishes the phonon group velocity. The redistribution-dominated four-phonon scattering process spans a large optical gap, which effectively reduces the lattice thermal conductivity. The NdZnSbO compound exhibits direct semiconductor characteristic with a bandgap of 0.73 e V by adopting the Heyd-Scuseria-Ernzerhof(HSE06) functional in combination with spin–orbit coupling(SOC) effect. The multi-valley feature of NdZnSbO compound augur favorably for band degeneracy, thus amplifying the power factor. Consequently, an optimal figure-of-merit(ZT) of 3.40 at 900 K is achieved for the n-type NdZnSbO compound. The present study delves deeply insights into the origins for the low thermal conductivity of NdZnSbO compound and proposes an optimization scheme to enhance overall thermoelectric performance.

关键词： Bond strength (chemical)

3D tomographic analysis of equatorial plasma bubble using GNSS-TEC data from Indonesian GNSS Network

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2025年第1期9卷 127-136页

作者： Ihsan Naufal Muafiry Prayitno Abadi Teguh N.Pratama Dyah R.Martiningrum Sri Ekawati Yuandhika GWismaya Febrylian FChabibi Gatot HPramono Research Center for Climate and Atmosphere Indonesian National Research and Innovation Agency(BRIN)BandungIndonesia Indonesian Geospatial Information Agency(BIG) JakartaIndonesia dept.of Physics Faculty of ScienceUniversiti Teknologi MalaysiaJohor BahruMalaysia dept.Earth Planet Sci. Hokkaido UniversitySapporoJapan School of Electrical engineering Telkom UniversityBandungIndonesia

Equatorial Plasma Bubbles(EPBs)are ionospheric irregularities that take place near the magnetic *** most commonly occur after sunset during the equinox months,although they can also be observed during other *** phenomenon significantly disrupts radio wave signals essential to communication and navigation *** national network of Global Navigation Satellite System(GNSS)receivers in Indonesia(>30°longitudinal range)provides an opportunity for detailed EPB *** explore this,we conducted preliminary 3D tomography of total electron content(TEC)data captured by GNSS receivers following a geomagnetic storm on December 3,2023,when at least four EPB clusters occurred in the Southeast Asian *** and extracted TEC depletion with a 120-minute running average were then used as inputs for a 3D tomography *** 2D spatial distribution consistently captured the four EPB clusters over *** tomography results were validated through a classical checkerboard test and comparisons with other ionospheric data sources,such as the Global Ionospheric Map(GIM)and International Reference Ionosphere(IRI)*** of the results demonstrates the capability of the Indonesian GNSS network to measure peak ionospheric *** findings highlight the potential for future three-dimensional research of plasma bubbles in low-latitude regions using existing GNSS networks,with extensive longitudinal coverage.

关键词： EPB Indonesian GNSS Network 3D tomography

High-temperature self-powered X-ray detection in a bilayered hybrid ferroelectric halide perovskite

在线全文

学校读者我要写书评

暂无评论

science China Chemistry 2025年

作者： Yingying Zheng Panpan Yu Yunpeng Yao Shihai You Zeng-Kui Zhu Junhua Luo School of Chemistry and Chemical engineering Jiangxi Normal University Key Laboratory of Fluorine and Silicon for Energy materials and Chemistry of Ministry of Education Jiangxi Normal University School of Environmental and material engineering Yantai University Fujian science & Technology Innovation Laboratory for Optoelectronic Information of China

X-ray detectors which convert X-ray irradiation into electrical signals play an important role in diverse applications including medical diagnosis, security examination, nondestructive inspection, personal X-ray dosimeters and fundamental research[1–5]. Recently, metal halide perovskites（MHP） have been developed as a promising family for X-ray detection contributing to their intrinsic advantages, e.g.,simple synthesis, efficient X-ray absorption and excellent semiconducting properties[5–10].

关键词：