检索结果-南通市图书馆

Correlation between the rock mass properties and maximum horizontal stress:A case study of overcoring stress measurements

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 39-48页

作者： Peng Li Meifeng Cai Shengjun Miao Yuan Li Yu Wang Key Laboratory of Ministry of Education for Efficient Mining and Safety of Metal Mines University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Coal Resources and Safe Mining China University of Mining and TechnologyXuzhou 221116China

Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress *** investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution *** results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with *** is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and ***,there is no obvious relationship between the rock quality designation(RQD)and *** maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same *** addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.

关键词： overcoring stress measurements elastic modulus Poisson's ratio rock quality designation maximum horizontal stress fuzzy identification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Salsolinol as an RNA m~6A methylation inducer mediates dopaminergic neuronal death by regulating YAP1 and autophagy

引用

Neural Regeneration Research 2025年第3期20卷 887-899页

作者： Jianan Wang Yuanyuan Ran Zihan Li Tianyuan Zhao Fangfang Zhang Juan Wang Zongjian Liu Xuechai Chen Beijing International Science and technology Cooperation Base for Antiviral Drugs College of Chemistry and LifeBeijing University of TechnologyBeijingChina Department of Rehabilitation Beijing Rehabilitation HospitalCapital Medical UniversityBeijingChina

Salsolinol(1-methyl-6,7-dihydroxy-1,2,3,4-tetrahydroisoquinoline,Sal)is a catechol isoquinoline that causes neurotoxicity and shares structural similarity with 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine,an environmental toxin that causes Parkinson's ***,the mechanism by which Sal mediates dopaminergic neuronal death remains *** this study,we found that Sal significantly enhanced the global level of N~6-methyladenosine(m~6A)RNA methylation in PC12 cells,mainly by inducing the downregulation of the expression of m~6A demethylases fat mass and obesity-associated protein(FTO)and alk B homolog 5(ALKBH5).RNA sequencing analysis showed that Sal downregulated the Hippo signaling *** m~6A reader YTH domain-containing family protein 2(YTHDF2)promoted the degradation of m~6A-containing Yes-associated protein 1(YAP1)mRNA,which is a downstream key effector in the Hippo signaling ***,downregulation of YAP1 promoted autophagy,indicating that the mutual regulation between YAP1 and autophagy can lead to *** findings reveal the role of Sal on m~6A RNA methylation and suggest that Sal may act as an RNA methylation inducer mediating dopaminergic neuronal death through YAP1 and *** results provide greater insights into the neurotoxic effects of catechol isoquinolines compared with other studies and may be a reference for assessing the involvement of RNA methylation in the pathogenesis of Parkinson's disease.

关键词： ALKBH5 autophagy FTO Hippo pathway m~6A Parkinson's disease RNA methylation salsolinol YAP1 YTHDF2

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flexible molecules dedicate to release strain of inverted inorganic perovskite solar cell

引用

Journal of Energy Chemistry 2025年第1期100卷 87-93页

作者： Hongrui Sun Sanlong Wang Pengyang Wang Yali Liu Shanshan Qi Biao Shi Ying Zhao Xiaodan Zhang Institute of Photoelectronic Thin Film Devices and technology Renewable Energy Conversion and Storage Center State Key Laboratory of Photovoltaic Materials and CellsNankai University Key Laboratory of Photoelectronic Thin Film Devices and technology of Tianjin Haihe Laboratory of Sustainable Chemical Transformations Engineering Research Center of Thin Film Photoelectronic technology of Ministry of Education Collaborative Innovation Center of Chemical Science and Engineering (Tianjin)

The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells （IPSCs）,which reduces the defect formation ***,a flexible molecule 5-maleimidovaleric acid （5-MVA） was introduced as a strain buffer to release the residual strain of *** anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb2+through Lewis acid-base reaction,thus tightly“pull”the perovskite *** in-between soft carbon chain increased the structural flexibility of CsPbI2.85Br0.15perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI2.85Br0.15,resisted the corrosion of external strain,and also reduced the formation of defects such as VIand *** addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level ***,power conversion efficiency （PCE） of NiOxbased inverted IPSCs increased from 19.25% to 20.82% with the open-circuit voltage enhanced from 1.164 V to 1.230 *** release of strain also improved the stability of CsPbI2.85Br0.15perovskite films and devices.

关键词： Perovskite solar cells

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dielectric-ion-conductive ZnNb2O6 layer enabling rapid desolvation and diffusion for dendrite-free Zn metal batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 693-701页

作者： Haifeng Yang Jian Wang Panpan Zhang Xiaomin Cheng Qinghua Guan Jing Dong Bixian Chen Lujie Jia Jing Zhang Yongzheng Zhang Yunjian Liu Hongzhen Lin School of Materials Science and Engineering Jiangsu University i-Lab & CAS Key Laboratory of Nanophotonic Materials and Devices Suzhou Institute of Nano-Tech and Nano-Bionics Chinese Academy of Sciences Helmholtz Institute Ulm (HIU) Karlsruhe Institute of technology (KIT) School of Materials Science and Engineering Xi'an University of Technology State Key Laboratory of Chemical Engineering East China University of Science and Technology

Rechargeable aqueous zinc-metal batteries （AZMBs） are promising candidates for large-scale energy storage systems due to their low cost and high ***,their performance and sustainability are significantly hindered by the sluggish desolvation kinetics at the electrode/electrolyte interface and the corresponding hydrogen evolution reaction where active water molecules tightly participate in the Zn（H2O）62+solvation ***,learnt from self-generated solid electrolyte interphase （SEI） in anodes,the dielectric but ion-conductive zinc niobate nanoparticles artificial layer is constructed on metallic Zn surface （ZNB@Zn）,acting as a rapid desolvation *** zincophilic and dielectric-conductive properties of ZNB layer accelerate interfacial desolvation/diffusion and suppress surface corrosion or dendrite formation,achieving uniform Zn plating/stripping behavior,as confirmed by electronic/optical microscopies and interface spectroscopical measurements together with theoretical ***,the as-prepared ZNB@Zn electrode exhibits excellent cycling stability of over 2000 h and robust reversibility （99.54%） even under high current density and depth of discharge ***,the assembled ZNB@Zn-based full cell displays high capacity-retention rate of 80.21%after 3000 cycles at 5 A g-1and outstanding rate performance up to 10 A *** large-areal pouch cell is stabilized for hundreds of cycles,highlighting the bright prospects of the dielectric but ion-conductive layer in further application of AZMBs.

关键词： Zn metal battery Dielectric artificial layer Rapid ion diffusion Zincophilic diffusion Active water inhibition

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dynamic behaviors of graphene platelets-reinforced metal foam piezoelectric beams with velocity feedback control

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 63-80页

作者： Jie CHEN Xinyue ZHANG Mingyang FAN School of Mathematics Statistics and Mechanics Beijing University of Technology College of Mechanical & Energy Engineering Beijing University of Technology

Graphene platelets(GPLs)-reinforced metal foam structures enhance the mechanical properties while maintaining the lightweight characteristics of metal foams. Further bonding piezoelectric actuator and sensor layers on the surfaces of GPLs-reinforced metal foam beams enables active vibration control, greatly expanding their applications in the aerospace industry. For the first time, this paper investigates the vibration characteristics and active vibration control of GPLs-reinforced metal foam beams with surfacebonded piezoelectric layers. The constant velocity feedback scheme is used to design the closed-loop controller including piezoelectric actuators and sensors. The effects of the GPLs on the linear and nonlinear free vibrations of the beams are numerically *** Newmark-β method combined with Newton's iteration technique is used to calculate the nonlinear responses of the beams under different load forms including harmonic loads,impact loads, and moving loads. Additionally, special attention is given to the vibration reduction performance of the velocity feedback control on the responses of the beam.

关键词： Piezoelectric actuators

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

An Improved Practical Byzantine Fault-Tolerant Algorithm Based on XGBoost Grouping for Consortium Chains

引用

Computers, Materials & Continua 2025年第1期82卷 1295-1311页

作者： Xiaowei Wang Haiyang Zhang Jiasheng Zhang Yingkai Ge Kexin Cui Zifu Peng Zhengyi Li Lihua Wang College of Electronic and Information Engineering Shandong University of Science and TechnologyQingdao266590China

In response to the challenges presented by the unreliable identity of the master node,high communication overhead,and limited network support size within the Practical Byzantine Fault-Tolerant(PBFT)algorithm for consortium chains,we propose an improved PBFT algorithm based on XGBoost grouping called XG-PBFT in this ***-PBFT constructs a dataset by training important parameters that affect node performance,which are used as classification indexes for *** XGBoost algorithm then is employed to train the dataset,and nodes joining the system will be grouped according to the trained grouping *** them,the nodes with higher parameter indexes will be assigned to the consensus group to participate in the consensus,and the rest of the nodes will be assigned to the general group to receive the consensus *** order to reduce the resource waste of the system,XG-PBFT optimizes the consensus protocol for the problem of high complexity of PBFT ***,we evaluate the performance of *** experimental results show that XG-PBFT can significantly improve the performance of throughput,consensus delay and communication complexity compared to the original PBFT algorithm,and the performance enhancement is significant compared to other algorithms in the case of a larger number of *** results demonstrate that the XG-PBFT algorithm is more suitable for large-scale consortium chains.

关键词： Consortium chain PBFT grouping reputation XGBoost

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Remaining Life Prediction Method for Photovoltaic Modules Based on Two-Stage Wiener Process

引用

Energy Engineering 2025年第1期122卷 331-347页

作者： Jie Lin Hongchi Shen Tingting Pei Yan Wu School of Electrical Engineering and Information Engineering Lanzhou University of TechnologyLanzhou730050China

Photovoltaic (PV) modules, as essential components of solar power generation systems, significantly influence unitpower generation *** service life of these modules directly affects these costs. Over time, the performanceof PV modules gradually declines due to internal degradation and external environmental *** cumulativedegradation impacts the overall reliability of photovoltaic power generation. This study addresses the complexdegradation process of PV modules by developing a two-stage Wiener process model. This approach accountsfor the distinct phases of degradation resulting from module aging and environmental influences. A powerdegradation model based on the two-stage Wiener process is constructed to describe individual differences inmodule degradation processes. To estimate the model parameters, a combination of the Expectation-Maximization(EM) algorithm and the Bayesian method is employed. Furthermore, the Schwarz Information Criterion (SIC) isutilized to identify critical change points in PV module degradation trajectories. To validate the universality andeffectiveness of the proposed method, a comparative analysis is conducted against other established life predictiontechniques for PV modules.

关键词： Photovoltaic modules degradation stochastic processes lifetime prediction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Accurate manipulation of anthropomorphic robotic arm based on 3D human eye gazing with posture error compensation

引用

Science China Technological Sciences 2025年

作者： Quanlin LI Xianzong WANG Jiaji MA Qianjun HUANG Qizhi JIANG Wenbin CHEN Caihua XIONG State Key Laboratory of Intelligent Manufacturing Equipment and technology School of Mechanical Science and Engineering Huazhong University of Science and Technology Institute of Medical Equipment Science and Engineering Huazhong University of Science and Technology

As humans and robots work closer together than ever, anthropomorphic robotic arms with intuitive human-robot interaction interfaces have drawn massive attention to improving the quality of robot-assisted manipulation. In pursuit of this,we designed a dedicated 7-degrees-of-freedom (DoF) anthropomorphic robotic arm having three compact differential joints and a head-mounted gaze tracker enabling head-pose-tracked 3D gaze estimation. Moreover, two key challenges were addressed to achieve accurate robot-assisted manipulation of the object indicated by the direction of human gaze. First, a novel predictive pupil feature was proposed for 3D gaze estimation. Differing from most existing features subjected to the common paraxial approximation assumption, the proposed novel predictive pupil feature considered the light refraction at two corneal surfaces with a more realistic eye model, significantly improving the 3D gaze estimation accuracy when the eyeball rotates at large angles. Second, a novel optimization-based approach was developed to efficiently compensate for the posture errors of the designed 7-DoF anthropomorphic robotic arm for accurate manipulation. Compared with the existing Jacobian-based or optimization-based approaches with nominal joint values as iteration initial, the proposed approach computed the optimal iteration initial and realized faster convergence for real-time posture error compensation. With the posture error compensation in real time and 3D gaze estimated accurately, the human can command accurate robot-assisted manipulation using his eyes intuitively. The proposed system was successfully tested on five healthy subjects.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 20-38页

作者： Qinjin Dai Xuefeng Liu Xin Ma Shaojie Tian Qinghe Cui Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic Materials and Processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China Laboratory for Advanced Materials Processing of Ministry of Education University of Science and Technology BeijingBeijing 100083China School of Mechanical and Electrical Engineering Xinjiang Institute of EngineeringUrumqi 830023China

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine *** analysis has been used to characterize the shapes of metal materials at various scales and *** methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and ***,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal *** the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear *** relationship between the fractal dimensions and properties of metal material surfaces and interfaces is *** from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be *** is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

关键词： metal material surfaces and interfaces fractal analysis fractal dimension homogeneity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A bio-inspired optical imaging method for robotic perception in turbid water

引用

Science China Technological Sciences 2025年第1期 79-81页

作者： Xudong SUN Yafeng LI Peng LIN Xiaodi SHANG Xianping FU School of Information Science and technology Dalian Maritime University College of Computer Science and technology Qingdao University

In the realm of underwater robotics, optical imaging plays a pivotal role in many scientific researches. Due to the effects of absorption and scattering,images captured in turbid water are severely degraded. Therefore, enhancing the quality of underwater optical images stands paramount in ensuring the continued advancement and efficacy of underwater robots across its multifarious applications.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：