检索结果-南通市图书馆

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

Frontiers of structural and Civil engineering 2024年第8期18卷 1225-1236页

作者： M.BEKAERT K.van TITTELBOOM G.de SCHUTTER Magnel-Vandepitte Laboratory for structural engineering and Building Materials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming more widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Adhesion performance of alkali-activated material for 3-dimensional printing of tunnel linings at different temperatures

引用

Frontiers of structural and Civil engineering 2024年第1期18卷 66-79页

作者： Yaxin TAO Xiaodi DAI Geert de SCHUTTER Kim Van TITTELBOOM department of structural engineering and Building Materials Ghent UniversityGhent 9052Belgium

Robotic-based technologies such as automated spraying or extrusion-based 3-dimensional(3D)concrete printing can be used to build tunnel linings,aiming at reducing labor and mitigating the associated safety issues,especially in the high-geothermal ***-based 3D concrete printing(3DCP)has additional advantages over automated sprayings,such as improved surface quality and no ***,the effect of different temperatures on the adhesion performance of 3D-printed materials for tunnel linings has not been *** study developed several alkali-activated slag mixtures with different activator modulus ratios to avoid the excessive use of Portland cement and enhance sustainability of 3D printable *** thermal responses of the mixtures at different temperatures of 20 and 40℃ were *** adhesion strength of the alkali-activated material was evaluated for both early and later ***,the structural evolution of the material exposed to different temperatures was *** was followed by microstructure *** indicate that elevated temperatures accelerate material reactions,resulting in improved early-age adhesion ***,higher temperatures contribute to the development of a denser microstructure and enhanced mechanical strength in the hardened stage,particularly in mixtures with higher silicate content.

关键词： alkali-activated material 3DCP tunnel lining high-geothermal environment adhesion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

引用

Frontiers of structural and Civil engineering 2024年第7期18卷 977-997页

作者： M.P.SALAIMANIMAGUDAM J.JAYAPRAKASH department of structural and Geotechnical engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effectiveness of external prestressing in enhancing the non-ductile hanger failure mechanism in reinforced concrete inverted T-beams

引用

Frontiers of structural and Civil engineering 2024年第7期18卷 1050-1065页

作者： Ahmed M.ATTA Reda N.BEHIRY Mohammed I.HARAZ structural engineering department Faculty of EngineeringTanta UniversityTanta 33511Egypt Nile Higher Institute for engineering and Technology Mansoura 11001Egypt

Recently,inverted T-beams have been used in reinforced concrete(RC)bridges to support transverse precast *** T-beams,contrary to practice with conventional beams,are loaded on the flanges upper *** loading configuration causes hanger failure due to the generation of vertical tensile stresses near the bottom of the *** key purpose of this study is to investigate the efficiency of vertical external prestressing stainless-steel bars in mitigating non-ductile hanger failure in reinforced concrete inverted *** experimental study on six inverted-T beams,including two un-strengthened specimens,was carried *** study showed that the value of the prestressing level had a considerable impact on the performance of hanger mechanism in relation to crack pattern,ultimate loads,cracking behavior,load-deflection,strains,and *** experimental results indicated that the suggested method for strengthening inverted T-beams had efficacy in reducing the seriousness of the non-ductile hanger failure and resulted in a strength increase of up to 53% when compared to that of the un-strengthened ***,two analytical models for estimating the hanger capacity and the average crack width of the strengthened RC inverted T-beams were *** models that were proposed exhibited a high degree of agreement with the experimental results.

关键词： RC bridges inverted T-beams strengthening hanger failure external prestressing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparison between seismic analysis of twisting and regular 52-story towers considering soil-structure interaction

引用

Earthquake engineering and engineering Vibration 2024年第3期23卷 663-675页

作者： Mohamed Naguib Abouelsaad Mohammed Shaaban Salah El Bagalaty Mohamed E.El Madawy structural engineering department Faculty of EngineeringMansura UniversityMansoura 35511Egypt Faculty of engineering Delta University for Science and TechnologyGamasa 35712Egypt

A dynamic analysis of both twisting and regular towers is carried out to determine the results of considering soil-structure interaction(SSI)on high-rise *** addition,the difference between the seismic performance of using twisting towers over regular ones is *** twisting tower is a simulation of the Evolution Tower(Moscow).The towers’skeletons consist of RC elements and rest on a reinforced concrete piled-raft *** soil model is considered as multi-layered with the same soil properties as the zone chosen for the analysis(New Mansoura City,Egypt).The only difference between both towers is their shape in *** whole system is modelled and analyzed in a single step as one full 3D model,which is known as the direct approach in *** analyses are carried out using finite-element software(Midas GTS NX).Dynamic output responses due to three records of seismic loads are proposed and presented in some *** on the results,it is concluded that SSI has a considerable effect on the dynamic response of tall buildings mainly because of the foundation flexibility,as it leads to lengthening the vibration period,increasing the story drift and the base shear for both cases.

关键词： soil-structure interaction seismic analysis twisting towers base shear story drift finite element method Midas GTS NX

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of component stiffness equations for thread-fixed one-side bolt connections to an enclosed rectangular hollow section column under tension

引用

Frontiers of structural and Civil engineering 2024年第4期18卷 568-586页

作者： Fu-Wei WU Yuan-Qi LI department of structural engineering Tongji UniversityShanghai 200092China State Key Laboratory of Disaster Reduction in Civil engineering Tongji UniversityShanghai 200092China

The derivation and validation of analytical equations for predicting the tensile initial stiffness of threadfixed one-side bolts(TOBs),connected to enclosed rectangular hollow section(RHS)columns,is presented in this *** unknown stiffness components are considered:the TOBs connection and the enclosed RHS ***,the trapezoidal thread of TOB,as an equivalent cantilevered beam subjected to uniformly distributed loads,is analyzed to determine the associated *** on the findings,the thread-shank serial-parallel stiffness model of TOB connection is *** analysis of the tensile stiffness of the enclosed RHS face due to two bolt forces,the four sidewalls are treated as rotation constraints,thus reducing the problem to a two-dimensional plate *** to the load superposition method,the deflection of the face plate is resolved into three components under various boundary and load *** to the plate deflection theory of Timoshenko,the analytical solutions for the three deflections are derived in terms of the variables of bolt spacing,RHS thickness,height to width ratio,***,the validity of the above stiffness equations is verified by a series of finite element(FE)models of T-stub *** proposed component stiffness equations are an effective supplement to the component-based method.

关键词： initial stiffness component based method thread-fixed one-side bolt rectangular hollow sections analytical equation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Subpicosecond laser ablation behavior of a magnesium target and crater evolution:Molecular dynamics study and experimental validation

引用

Chinese Physics B 2024年第7期33卷 613-622页

作者：江国龙周霞 State Key Laboratory of structural Analysis for Industrial Equipment Department of Engineering MechanicsFaculty of Vehicle Engineering and MechanicsDalian University of TechnologyDalian 116024China

The micro-ablation processes and morphological evolution of ablative craters on single-crystal magnesium under subpicosecond laser irradiation are investigated using molecular dynamics(MD) simulations and *** simulation results exhibit that the main failure mode of single-crystal Mg film irradiated by a low fluence and long pulse width laser is the ejection of surface atoms,which has laser-induced high ***,under high fluence and short pulse width laser irradiation,the main damage mechanism is nucleation fracture caused by stress wave reflection and superposition at the bottom of the *** addition,Mg[0001] has higher pressure sensitivity and is more prone to ablation than Mg[0001].The evolution equation of crater depth is established using multi-pulse laser ablation simulation and verified by *** results show that,under multiple pulsed laser irradiation,not only does the crater depth increase linearly with the pulse number,but also the quadratic term and constant term of the fitted crater profile curve increase linearly.

关键词： laser-material interaction molecular dynamics(MD)simulation ablation crater morphology magnesium

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The action mechanism of the work done by the electric field force on moving charges to stimulate the emergence of carrier generation/recombination in a PN junction

引用

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1001-1014页

作者： Lingyun GUO Yizhan YANG Wanli YANG Yuantai HU department of Mechanics School of Aerospace EngineeringHubei Key Laboratory of Engineering Structural Analysis and Safety AssessmentHuazhong University of Science and TechnologyWuhan 430074China

It is discovered that the product of the current and the electric field in a PN junction should be regarded as the rate of work(power)done by the electric field force on moving charges(hole current and electron current),which was previously misinterpreted as solely a Joule heating *** clarify that it is exactly the work done by the electric field force on the moving charges to stimulate the emergence of non-equilibrium carriers,which triggers the novel physical *** regards to Joule heat,we point out that it should be calculated from Ohm’s law,rather than simply from the product of the current and the electric *** on this understanding,we conduct thorough discussion on the role of the electric field force in the process of carrier recombination and carrier *** thermal effects of carrier recombination and carrier generation followed are incorporated into the thermal equation of *** present study shows that the exothermic effect of carrier recombination leads to a temperature rise at the PN interface,while the endothermic effect of carrier generation causes a temperature reduction at the *** two opposite effects cause opposite heat flow directions in the PN junction under forward and backward bias voltages,highlighting the significance of managing device heating phenomena in design ***,this study possesses referential significance for the design and tuning on the performance of piezotronic devices.

关键词： piezoelectric semiconductor(PS) work done by electric field force thermal effect piezotronic device resistivity conductivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An isogeometric approach to static and transient analysis of fluid-infiltrated porous metal foam piezoelectric nanoplates with flexoelectric effects and variable nonlocal parameters

引用

Frontiers of structural and Civil engineering 2024年第3期18卷 461-489页

作者： Quoc-Hoa PHAM Van Ke Tran Phu-Cuong Nguyen Faculty of engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh City 700000Vietnam Faculty of Mechanical engineering Le Quy Don Technical UniversityHanoi 100000Vietnam Advanced structural engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh City 700000Vietnam

In this work,a novel refined higher-order shear deformation plate theory is integrated with nonlocal elasticity theory for analyzing the free vibration,bending,and transient behaviors of fluid-infiltrated porous metal foam piezoelectric nanoplates resting on Pasternak elastic foundation with flexoelectric *** analysis(IGA)and the Navier solution are applied to the *** innovation in the present study is that the influence of the in-plane variation of the nonlocal parameter on the free and forced vibration of the piezoelectric nanoplates is investigated for the first *** nonlocal parameter and material characteristics are assumed to be material-dependent and vary gradually over the thickness of *** on Hamilton’s principle,equations of motion are built,then the IGA approach combined with the Navier solution is used to analyze the static and dynamic response of the ***,we investigate the effects of the porosity coefficients,flexoelectric parameters,elastic stiffness,thickness,and variation of the nonlocal parameters on the mechanical behaviors of the rectangular and elliptical piezoelectric nanoplates.

关键词： isogeometric analysis fluid-infiltrated porous piezoelectric nanoplates static and transient analysis flexoelectric effect variable nonlocal parameters

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Exact solution for thermal vibration of multi-directional functionally graded porous plates submerged in fluid medium

引用

Defence Technology（防务技术） 2024年第5期35卷 77-99页

作者： Quoc-Hoa Pham Van Ke Tran Phu-Cuong Nguyen Faculty of engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh CityViet Nam Faculty of Mechanical engineering Le Quy Don Technical UniversityHanoiViet Nam Advanced structural engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh CityViet Nam

An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this *** properties of MFG porous plates change according to the length,width,and thickness directions for various materials and the porosity distribution which can be widely applied in many fields of engineering and defence ***,new porous rules that depend on spatial coordinates and grading indexes are proposed in the present *** Hamilton's principle and the refined higher-order shear deformation plate theory,the governing equation of motion of an MFG porous rectangular plate in a fluid medium(the fluid-plate system)is *** fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to compute the extra *** GalerkinVlasov solution is used to solve and give natural frequencies of MFG porous plates with various boundary conditions in a fluid *** validity and reliability of the suggested method are confirmed by comparing numerical results of the present work with those from available works in the *** effects of different parameters on the thermal vibration response of MFG porous rectangular plates are studied in *** findings demonstrate that the behavior of the structure within a liquid medium differs significantly from that within a vacuum ***,they offer appropriate operational approaches for the structure when employed in various mediums.

关键词： Plate-fluid contact Galerkin Vlasov's method Multi-directional functionally graded plate Novel porosity Thermal vibration Refined higher-order shear deformation theory

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：