检索结果-南通市图书馆

Frontiers of structural and Civil engineering 2024年第1期18卷 66-79页

作者： Yaxin TAO Xiaodi DAI Geert de SCHUTTER Kim Van TITTELBOOM department of structural engineering and Building Materials Ghent UniversityGhent 9052Belgium

Robotic-based technologies such as automated spraying or extrusion-based 3-dimensional(3D)concrete printing can be used to build tunnel linings,aiming at reducing labor and mitigating the associated safety issues,especially in the high-geothermal environment.Extrusion-based 3D concrete printing(3DCP)has additional advantages over automated sprayings,such as improved surface quality and no rebound.However,the effect of different temperatures on the adhesion performance of 3D-printed materials for tunnel linings has not been investigated.This study developed several alkali-activated slag mixtures with different activator modulus ratios to avoid the excessive use of Portland cement and enhance sustainability of 3D printable materials.The thermal responses of the mixtures at different temperatures of 20 and 40℃ were studied.The adhesion strength of the alkali-activated material was evaluated for both early and later ages.Furthermore,the structural evolution of the material exposed to different temperatures was measured.This was followed by microstructure characterization.Results indicate that elevated temperatures accelerate material reactions,resulting in improved early-age adhesion performance.Moreover,higher temperatures contribute to the development of a denser microstructure and enhanced mechanical strength in the hardened stage,particularly in mixtures with higher silicate content.

关键词： alkali-activated material 3DCP tunnel lining high-geothermal environment adhesion

The action mechanism of the work done by the electric field force on moving charges to stimulate the emergence of carrier generation/recombination in a PN junction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1001-1014页

作者： Lingyun GUO Yizhan YANG Wanli YANG Yuantai HU department of Mechanics School of Aerospace EngineeringHubei Key Laboratory of Engineering Structural Analysis and Safety AssessmentHuazhong University of Science and TechnologyWuhan 430074China

It is discovered that the product of the current and the electric field in a PN junction should be regarded as the rate of work(power)done by the electric field force on moving charges(hole current and electron current),which was previously misinterpreted as solely a Joule heating effect.We clarify that it is exactly the work done by the electric field force on the moving charges to stimulate the emergence of non-equilibrium carriers,which triggers the novel physical phenomena.As regards to Joule heat,we point out that it should be calculated from Ohm’s law,rather than simply from the product of the current and the electric field.Based on this understanding,we conduct thorough discussion on the role of the electric field force in the process of carrier recombination and carrier generation.The thermal effects of carrier recombination and carrier generation followed are incorporated into the thermal equation of energy.The present study shows that the exothermic effect of carrier recombination leads to a temperature rise at the PN interface,while the endothermic effect of carrier generation causes a temperature reduction at the interface.These two opposite effects cause opposite heat flow directions in the PN junction under forward and backward bias voltages,highlighting the significance of managing device heating phenomena in design considerations.Therefore,this study possesses referential significance for the design and tuning on the performance of piezotronic devices.

关键词： piezoelectric semiconductor(PS) work done by electric field force thermal effect piezotronic device resistivity conductivity

维普期刊数据库

An isogeometric approach to static and transient analysis of fluid-infiltrated porous metal foam piezoelectric nanoplates with flexoelectric effects and variable nonlocal parameters

在线全文

学校读者我要写书评

暂无评论

Frontiers of structural and Civil engineering 2024年第3期18卷 461-489页

作者： Quoc-Hoa PHAM Van Ke Tran Phu-Cuong Nguyen Faculty of engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh City 700000Vietnam Faculty of Mechanical engineering Le Quy Don Technical UniversityHanoi 100000Vietnam Advanced structural engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh City 700000Vietnam

In this work,a novel refined higher-order shear deformation plate theory is integrated with nonlocal elasticity theory for analyzing the free vibration,bending,and transient behaviors of fluid-infiltrated porous metal foam piezoelectric nanoplates resting on Pasternak elastic foundation with flexoelectric effects.Isogeometric analysis(IGA)and the Navier solution are applied to the problem.The innovation in the present study is that the influence of the in-plane variation of the nonlocal parameter on the free and forced vibration of the piezoelectric nanoplates is investigated for the first time.The nonlocal parameter and material characteristics are assumed to be material-dependent and vary gradually over the thickness of structures.Based on Hamilton’s principle,equations of motion are built,then the IGA approach combined with the Navier solution is used to analyze the static and dynamic response of the nanoplate.Lastly,we investigate the effects of the porosity coefficients,flexoelectric parameters,elastic stiffness,thickness,and variation of the nonlocal parameters on the mechanical behaviors of the rectangular and elliptical piezoelectric nanoplates.

关键词： isogeometric analysis fluid-infiltrated porous piezoelectric nanoplates static and transient analysis flexoelectric effect variable nonlocal parameters

A pressure-sensitive rheological origin of high friction angles of granular matter observed in NASA–MGM project

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第6期33卷 559-567页

作者：程晓辉肖世泽杨森赵乃峰 Alex Sixie Cao department of Civil engineering Tsinghua UniversityBeijing 100084China College of Transportation engineering Nanjing Tech UniversityNanjing 211816China Institute of structural engineering ETH ZurichZurich 8092Switzerland

An abnormally high peak friction angle of Ottawa sand was observed in(National Aeronautics and Space Administration) NASA–(Mechanics of Granular Materials) MGM tests in microgravity conditions on the space shuttle. Previous investigations have been unsuccessful in providing a constitutive insight into this behavior of granular materials under extremely low effective stress conditions. Here, a recently proposed unified constitutive model for transient rheological behavior of sand and other granular materials is adopted for the analytical assessment of high peak friction angles. For the first time, this long-eluded behavior of sand is attributed to a hidden rheological transition mechanism, that is not only rate-sensitive, but also pressure-sensitive. The NASA–MGM microgravity conditions show that shear-tests of sand can be performed under abnormally low confining stress conditions. The pressure-sensitive behavior of granular shearing that is previously ignored is studied based on the μ(I) rheology and its variations. Comparisons between the model and the NASA microgravity tests demonstrate a high degree of agreement. The research is highly valid for pressure-sensitive and rate-dependent problems that occur during earthquakes, landslides, and space exploration.

关键词： granular matter microgravity pressure-sensitive NASA–MGM

维普期刊数据库

Exact solution for thermal vibration of multi-directional functionally graded porous plates submerged in fluid medium

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第5期35卷 77-99页

作者： Quoc-Hoa Pham Van Ke Tran Phu-Cuong Nguyen Faculty of engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh CityViet Nam Faculty of Mechanical engineering Le Quy Don Technical UniversityHanoiViet Nam Advanced structural engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh CityViet Nam

An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this study.Mechanical properties of MFG porous plates change according to the length,width,and thickness directions for various materials and the porosity distribution which can be widely applied in many fields of engineering and defence technology.Especially,new porous rules that depend on spatial coordinates and grading indexes are proposed in the present work.Applying Hamilton's principle and the refined higher-order shear deformation plate theory,the governing equation of motion of an MFG porous rectangular plate in a fluid medium(the fluid-plate system)is obtained.The fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to compute the extra mass.The GalerkinVlasov solution is used to solve and give natural frequencies of MFG porous plates with various boundary conditions in a fluid medium.The validity and reliability of the suggested method are confirmed by comparing numerical results of the present work with those from available works in the literature.The effects of different parameters on the thermal vibration response of MFG porous rectangular plates are studied in detail.These findings demonstrate that the behavior of the structure within a liquid medium differs significantly from that within a vacuum medium.Thereby,they offer appropriate operational approaches for the structure when employed in various mediums.

关键词： Plate-fluid contact Galerkin Vlasov's method Multi-directional functionally graded plate Novel porosity Thermal vibration Refined higher-order shear deformation theory

维普期刊数据库博看期刊

Seismic control of multi-degrees-of-freedom structures by vertical mass isolation method using MR dampers

在线全文

学校读者我要写书评

暂无评论

Earthquake engineering and engineering Vibration 2024年第2期23卷 503-510页

作者： Mohamad Shahrokh Abdi Masoud Nekooei Mohammad-Ali Jafari department of Civil engineering Marivan BranchIslamic Azad UniversityMarivan ***Iran department of Civil engineering Science and Research BranchIslamic Azad UniversityTehran ***Iran structural department of Transmission and Distribution Research Center Niroo Research Institute(NRI)Tehran ***Iran

Vertical mass isolation(VMI)is one of the novel methods for the seismic control of structures.In this method,the entire structure is assumed to consist of two mass and stiffness subsystems,and an isolated layer is located among them.In this study,the magnetorheological damper in three modes:passive-off,passive-on,and semi-active mode with variable voltage between zero and 9 volts was used as an isolated layer between two subsystems.Multi-degrees-of-freedom structures with 5,10,and 15 floors in two dimensions were examined under 11 pairs of near field earthquakes.On each level,the displacement of MR dampers was taken into account.The responses of maximum displacement,maximum inter-story drift,and maximum base shear in controlled and uncontrolled buildings were compared to assess the suggested approach for seismic control of the structures.According to the results,the semi-active control method can reduce the response by more than 12%compared to the uncontrolled mode in terms of maximum displacement of the mass subsystem of the structures.This method can reduce more than 16%and 20%of the responses compared to the uncontrolled mode in terms of maximum inter-story drift and base shear of the structure,respectively.

关键词： seismic control vertical mass isolation base shear magnetorheological damper semi-active control

维普期刊数据库

A General Simulation Method for Complex Deformation of Irregular-Shaped Origami Configurations

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第1期37卷 90-98页

作者： Zhaochen Dong Yichao Zhu Xu Guo State Key Laboratory of structural Analysis for Industrial Equipment Department of Engineering MechanicsInternational Research Center for Computational MechanicsDalian University of TechnologyDalian 116023China

Most existing treatments for origami-folding simulations have focused on regular-shaped configurations.This article aims to introduce a general strategy for simulating and analyzing the deformation process of irregular shapes by means of computational capabilities nowadays.To better simulate origami deformation with folding orders,the concept of plane follow-up is introduced to achieve automated computer simulation of complex folding patterns,thereby avoiding intersection and penetration between planes.Based on the evaluation criteria such as the lowest storage energy with tightening and the fastest pace from tightening to unfolding,the optimal crease distribution patterns for four irregular(‘N’-,‘T’-,‘O’-,and‘P’-shaped)origami configurations are then presented under five candidates.When the dimensions of the origami are fixed,it is discovered that simpler folding patterns lead to faster deformation of the origami configuration.When the folding complexity is fixed,higher strain energy results in more rapid origami expansion.

关键词： Irregular-shaped origami Complex deformation Computer-aided origami design General simulation

Virus-like nanoparticle vaccines for inducing long-lasting immunity against infectious diseases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

National Science Review 2024年第4期11卷 13-15页

作者： Yi-Nan Zhang Sarah Auclair Jiang Zhu department of Integrative structural and Computational Biology The Scripps Research Institute department of Immunology and Microbiology The Scripps Research Institute

Prophylactic vaccines that can generate long-lasting protective immune responses are needed for many infectious diseases. Efficient vaccination requires vaccine antigens to be retained and presented to B cells in lymp...

关键词：

Development of a Three-Dimensional Multiscale Octree SBFEM for Viscoelastic Problems of Heterogeneous Materials

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第8期140卷 1831-1861页

作者： Xu Xu Xiaoteng Wang Haitian Yang Zhenjun Yang Yiqian He State Key Laboratory of structural Analysis Optimization and CAE Software for Industrial EquipmentDepartment of Engineering MechanicsDalian University of TechnologyDalian116024China Hubei Key Laboratory of Geotechnical and structural Safety School of Civil EngineeringWuhan UniversityWuhan430072China Mechanik–Materialtheorie Ruhr-Universität BochumBochum44801Germany

The multiscale method provides an effective approach for the numerical analysis of heterogeneous viscoelastic materials by reducing the degree of freedoms(DOFs).A basic framework of the Multiscale Scaled Boundary Finite Element Method(MsSBFEM)was presented in our previous works,but those works only addressed two-dimensional problems.In order to solve more realistic problems,a three-dimensional MsSBFEM is further developed in this article.In the proposed method,the octree SBFEM is used to deal with the three-dimensional calculation for numerical base functions to bridge small and large scales,the three-dimensional image-based analysis can be conveniently conducted in small-scale and coarse nodes can be flexibly adjusted to improve the computational accuracy.Besides,the Temporally Piecewise Adaptive Algorithm(TPAA)is used to maintain the computational accuracy of multiscale analysis by adaptive calculation in time domain.The results of numerical examples show that the proposed method can significantly reduce the DOFs for three-dimensional viscoelastic analysis with good accuracy.For instance,the DOFs can be reduced by 9021 times compared with Direct Numerical Simulation(DNS)with an average error of 1.87%in the third example,and it is very effective in dealing with three-dimensional complex microstructures directly based on images without any geometric modelling process.

关键词： Three-dimensionalmultiscale viscoelastic analysis numerical base functions octree SBFEM image-based analysis temporally piecewise adaptive algorithm

Strategy for suppressing abnormal grain growth of ZK60 Mg alloy during solution by pre-compression:A quasi-in-situ study

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 115-128页

作者： Zhenxu Wang Liang Chen Jianwei Tang Cunsheng Zhang Guoqun Zhao Key Laboratory for Liquid-Solid structural Evolution and Processing of Materials(Ministry of Education) Shandong UniversityJinanShandong 250061China department of Mechanical engineering Kyushu UniversityFukuoka 819-0395Japan

Abnormal grain growth(AGG)easily takes place in Mg alloys during high-temperature solutions,result-ing in deterioration of mechanical properties.Hence,the compression prior to solution(pre-compression)was conducted to suppress AGG,and the microstructure evolution as well as suppressing mechanisms was investigated based on quasi-in-situ analysis.After compression along the transverse direction,//ED grains preferentially nucleated and rapidly grew up,and the initial//ED texture was weakened.Two grain growth modes of heat-induced and strain-induced grain boundary migrations were found.The former was attributed to the high interfacial energy of grain boundaries with large curvature.The latter consumed the adjacent grains with high storage energy,forming abnormal grains with irregular shapes.The compression with a reduction>6%could obviously suppress AGG.The suppressing effects were mainly attributed to weakening the size advantage of//ED grains,increasing nucleation,reducing grain boundary character distribution,and redistributing storage energy distribution.After 12%compression along the transverse direction,30°misorientation of//ED grains and high energy grain boundaries were reduced.The{10-12}tensile twins and{10-15}high index twins induced by com-pression increased the nucleation of static recrystallization.Beside,compression introduces high-density dislocations,which also contributed to suppressing AGG behavior during solution.

关键词： Quasi-in-situ analysis Mg alloy Abnormal grain growth Compression Microstructure