检索结果-南通市图书馆

Journal of Advanced Ceramics 2024年第1期13卷 63-72页

作者： Min Fu Wenjing Hu Hua Tong Xin Ling Linggui Tan Fanglin Chen Zetian Tao School of resources Environment and Safety EngineeringUniversity of South ChinaHengyang 421001China department of mechanical engineering University of South CarolinaColumbia 29208USA

One potential solution to the problems of energy storage and conversion is the use of reversible protonic ceramic electrochemical cells(R-PCEC),which are based on the solid oxide fuel cell(SOFC)technology and offer a flexible route to the generation of renewable ***,the R-PCEC development faces a range of significant challenges,including slow oxygen reaction kinetics,inadequate durability,and poor round-trip efficiency resulting from the inadequacy of an air *** address these issues,we report novel B-sites doped Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.3)O_(3−δ)(PBCF)with varying amounts of Sn as the air electrode for R-PCEC to further enhance electrochemical performance at lower *** 600℃,R-PCEC with an air electrode consisting of Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.25)Sn_(0.05)O_(3+δ)has achieved peak power density of 1.12 W∙cm^(−2) in the fuel cell mode and current density of 1.79 A∙cm^(−2) in the electrolysis mode at a voltage of 1.3 ***,R-PCECs have shown good stability in the electrolysis mode of 100 *** study presents a practical method for developing durable high-performance air electrodes for R-PCECs.

关键词： triple conducting oxide dual-element doping protonic ceramic electrochemical cells(PCECs) catalytic

Analysis and Optimization of Operational and Pollutant Attributes of Diesel Engine with CNT-Infused Orange Peel Biodiesel-Diesel Blend Fuel

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 761-778页

作者： Ranjeet RAI R.R.SAHOO mechanical engineering department GLA UniversityMathura281406India mechanical engineering department IIT(BHU)Varanasi221005India

The current study is performed to find sustainable solutions for the future of transportation and environmental *** conventional methods and experimental design table(L16 Orthogonal Array)techniques have been employed to examine and optimize a diesel-powered engine's operational and pollutant *** L16 Orthogonal Array is obtained through Taguchi's experimental design approach using Minitab 16 *** experimental design incorporated three control variables,namely engine speed,fuel type,and engine load,each with four *** operational parameters,namely brake thermal efficiency(BTE)and brake specific fuel consumption(BSFC),as well as the emission characteristics,including hydrocarbon(HC),carbon monoxide(CO),nitrogen oxide(NO),and smoke emissions,were acquired using the L16 orthogonal array(OA) and subsequently *** utilization of methodologies such as signal-to-noise(S/N) ratio and grey analysis was employed to determine the optimal operational state of the engine to achieve maximum performance while minimizing *** engine's ideal state of operation,in terms of BTE and BSFC,was determined to be at 75% engine load,1000 r/min engine speed,and using 10^(-4)(in vol) carbon nanotube incorporated 20% orange peel biodiesel(OPB20CNT100) blended fuel(A3-B1-C4).The study indicated that engine load significantly influenced BTE and BSFC,with 84.05% and 87.79% contribution factors,*** 25% engine load,1000 r/min,and OPB20CNT100 fuel(A1-B1-C4) CO,smoke,NO,and HC emissions were the *** load affects emissions the *** BSFC increased 3.10% and NO emissions 1.77%.BTE,CO,smoke,and HC emissions decreased by 1.9%,12.29%,47.05%,and 47.22%,respectively,at optimal operating conditions concerning diesel *** study shows that Taguchi-Grey's experimental design optimizes diesel engine operational and pollutant *** outcomes revealed that orange peel biodiesel infused with CNT can replace diesel fuel in a

关键词： Taguchi-Grey method OPB20CNT100 transesterification S/N ratio GRG HC CO and NO

Directly predicting N2 electroreduction reaction free energy using interpretable machine learning with non-DFT calculated features

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第10期97卷 139-148页

作者： Yaqin Zhang Yuhang Wang Ninggui Ma Jun Fan department of Materials Science and engineering City University of Hong Kong Center for Advanced Nuclear Safety and Sustainable development City University of Hong Kong department of mechanical engineering City University of Hong Kong

Electrocatalytic nitrogen reduction to ammonia has garnered significant attention with the blooming of single-atom catalysts（SACs）,showcasing their potential for sustainable and energy-efficient ammonia ***,cost-effectively designing and screening efficient electrocatalysts remains a *** this study,we have successfully established interpretable machine learning（ML） models to evaluate the catalytic activity of SACs by directly and accurately predicting reaction Gibbs free *** models were trained using non-density functional theory（DFT） calculated features from a dataset comprising 90 graphene-supported *** results underscore the superior prediction accuracy of the gradient boosting regression（GBR） model for both Δg（N2→NNH） and ΔG（NH2→NH3）,boasting coefficient of determination（R2） score of 0.972 and 0.984,along with root mean square error（RMSE） of 0.051 and 0.085 eV,***,feature importance analysis elucidates that the high accuracy of GBR model stems from its adept capture of characteristics pertinent to the active center and coordination environment,unveilling the significance of elementary descriptors,with the colvalent radius playing a dominant ***,Shapley additive explanations（SHAP） analysis provides global and local interpretation of the working mechanism of the GBR *** analysis identifies that a pyrrole-type coordination（flag=0）,d-orbitals with a moderate occupation（Nd=5）,and a moderate difference in covalent radius(rTM-avenear 140 pm) are conducive to achieving high ***,we extend the prediction of activity to more catalysts without additional DFT calculations,validating the reliability of our feature engineering,model training,and design *** findings not only highlight new opportunity for accelerating catalyst design using non-DFT calculated features,but also shed light on the working mechanism of "black box" ML ***,the model provides valuable guidanc

关键词： Graphene Interpretable machine learning Nitrogen reduction Non-DFT features Single-atom catalyst

Research progress in friction stir processing of magnesium alloys and their metal matrix surface composites: Evolution in the 21^(st )century

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第6期12卷 2091-2146页

作者： Roshan Vijay Marode Tamiru Alemu Lemma Nabihah Sallih Srinivasa Rao Pedapati Mokhtar Awang Adeel Hassan department of mechanical engineering Universiti Teknologi PETRONASBandarSeri IskandarPerak 32610Malaysia department of mechanical engineering College of EngineeringThe University of Texas Permian BasinMidland-OdessaUnited States mechanical engineering department Universiti Teknologi BruneiBrunei

Rising concerns about climate change drive the demand for lightweight ***(Mg)alloys are highly valued for their low weight,making them increasingly important in various *** focusing on enhancing the characteristics of Mg alloys and developing their Metal Matrix Composites(MMCs)have gained significant attention worldwide over the past decade,driven by the global shift towards lightweight *** Stir Processing(FSP)has emerged as a promising technique to enhance the properties of Mg alloys and produce ***,FSP adapted to refine grain size from the micro to the nano level and accelerated the development of MMCs due to its solid-state nature and the synergistic effects of microstructure refinement and reinforcement,improving strength,hardness,ductility,wear resistance,corrosion resistance,and fatigue ***,producing defect-free and sound FSPed Mg and Mg-MMCs requires addressing several variables and their interdependencies,which opens up a broad range of practical *** existing reviews on individual FSP of Mg,its alloys,and MMCs,an attempt has been made to analyze the latest research on these three aspects collectively to enhance the understanding,application,and effectiveness of FSP for Mg and its *** review article discusses the literature,classifies the importance of Mg alloys,provides a historical background,and explores developments and potential applications of FSPed Mg *** focuses on novel fabrication methods,reinforcement strategies,machine and tool design parameters,material characterization,and integration with other methods for enhanced *** influence of process parameters and the emergence of defects are examined,along with specific applications in mono and hybrid composites and their microstructure *** study identifies promising reinforcement materials and highlights research gaps in FSP for Mg alloys and MMCs *** conclude

关键词： Magnesium alloys Friction stir processing Metal matrix composites Lightweight Surface modification

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第3期45卷 543-562页

作者： H.M.FEIZABAD M.H.YAS department of mechanical engineering Razi UniversityKermanshah ***Iran

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent *** fibers are renowned for their good mechanical properties,abundance,and short cycle *** beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic *** different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the *** elastic properties of the composite are determined with the law of *** Hamilton’s principle,the governing equations of motion are *** generalized differential quadrature method(GDQM)is then applied to the equations to obtain the *** achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam ***,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber ***,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

关键词： bamboo fiber free vibration buckling analysis functionally graded(FG)beam elastic foundation generalized differential quadrature method(GDQM)

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 155-178页

作者： N.SHAHVEISI S.FELI department of mechanical engineering Razi UniversityKermanshah ***Iran

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are *** current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial *** the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are *** classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of *** order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the *** element(FE)simulations are conducted by means of the ABAQUS *** effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

关键词： analytical model piezoelectric layer curved sandwich beam glass reinforced laminate(GRL) pliable core low-velocity impact(LVI) classical non-adhesive elastic contact theory

Research on the flow stability and noise reduction characteristics of quasi-periodic elastic support skin

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 222-236页

作者： Lu Chen Shao-gang Liu Dan Zhao Li-qiang Dong Kai Li Shuai Tang Jin Cui Hong Guo department of mechanical and Electrical engineering Harbin Engineering UniversityHarbin150001China

To enhance flow stability and reduce hydrodynamic noise caused by fluctuating pressure,a quasiperiodic elastic support skin composed of flexible walls and elastic support elements is proposed for fluid noise *** arrangement of the elastic support element is determined by the equivalent periodic distance and quasi-periodic *** this paper,a dynamic model of skin in a fluid environment is *** influence of equivalent periodic distance and quasi-periodic coefficient on flow stability is *** results suggest that arranging the elastic support elements in accordance with the quasi-periodic law can effectively enhance flow ***,the hydrodynamic noise calculation results demonstrate that the skin exhibits excellent noise reduction performance,with reductions of 10 dB in the streamwise direction,11 dB in the spanwise direction,and 10 dB in the normal *** results also demonstrate that the stability analysis method can serve as a diagnostic tool for flow fields and guide the design of noise reduction structures.

关键词： Flow stability Quasi-period Flexible wall Elastic support element Hydrodynamic noise

Impact of Fin Arrangement on Heat Transfer and Melting Characteristics of Phase Change Material

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 435-456页

作者： Arun UNIYAL Yogesh K.PRAJAPATI department of mechanical engineering National Institute of Technology UttarakhandSrinagar(Garhwal)246174India department of mechanical engineering BIT SindriDhanbadJharkhand828123India

Present work investigates the heat transfer and melting behaviour of phase change material(PCM) in six enclosures(enclosure-1 to 6) filled with paraffin *** enclosures are equipped with distinct arrangements of the fins while keeping the fin's surface area equal in each *** analysis has been presented to recognize the suitable fin arrangements that facilitate improved heat transfer and melting rate of the *** wall of the enclosure is maintained isothermal for the temperature values 335 K,350 K and 365 *** length of the enclosure including fins is ranging between 0 and *** have been illustrated through the estimation of important performance parameters such as energy absorbing capacity,melting rate,enhancement ratio,and Nusselt *** has been found that melting time(to melt 100% of the PCM) is 60.5%less in enclosure-2(with two fins of equal length) as compared to the enclosure-1,having no *** the fin surface area equal,if the longer fin is placed below the shorter fin(enclosure-3),melting time is further decreased by 14.1% as compared to ***,among all the configurations,enclosure-6 with wire-mesh fin structure exhibits minimum melting time which is 68.4% less as compared to the *** on the findings,it may be concluded that fins are the main driving agent in the enclosure to transfer the heat from heated wall to the *** design and positioning of the fins improve the heat transfer rate followed by melting of the PCM in the entire area of the *** of the favourable vortices and natural convection current in the enclosure accelerate the melting phenomenon and help to reduce charging time.

关键词： phase change material enclosure fin melting fraction energy storage heat transfer

Synthesis and Thermal Characterization of Solar Salt-Based Phase Change Composites with Graphene Nanoplatelets

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 491-500页

作者： Pethurajan VIGNESHWARAN Saboor SHAIK Sivan SURESH Müslüm ARICI Asif AFZAL department of Thermal and Energy engineering School of Mechanical Engineering(SMEC)Vellore Institute of TechnologyVelloreTamil NaduIndia Nanotechnology Research Laboratory Department of Mechanical EngineeringNational Institute of TechnologyTiruchirappalliTamil NaduIndia mechanical engineering department Engineering FacultyKocaeli UniversityUmuttepe CampusKocaeli41001Turkey department of mechanical engineering P.A.College of Engineering(affiliated to Visvesvaraya Technological UniversityBelagavi)Mangaluru574153India

Thermal energy storage(TES) systems use solar energy despite its irregular availability and day-night temperature *** work reports the thermal characterizations of solar salt-based phase change composites in the presence of graphene nanoplatelets(GNP).Solar salt(60:40 of NaNO_(3):KNO_(3)) possessing phase transition temperature and melting enthalpy of 221.01℃ and 134.58 kJ/kg is proposed as a phase change material(PCM) for high-temperature solar-based energy storage *** conductivity must be improved to make them suitable for widespread applications and to close the gap between the system needs where they are *** is added at weight concentrations of 0.1%,0.3%,and 0.5% with solar salt using the ball milling method to boost its thermal *** studies indicated the formation of a uniform surface of GNP on solar *** spectrum peaks identified the physical interaction between salt and *** characterization of the composites,such as thermal conductivity,DSC and TGA was carried out for the samples earlier and later 300 thermal cycles.0.5% of GNP has improved the thermal conductivity of salt by 129.67% and after thermal cycling,the enhancement reduced to 125.21% indicating that thermal cycling has a minor impact on thermal *** change temperature decreased by around 2.32% in the presence of0.5% GNP and the latent heat reduced by 4.34% after thermal *** thermograms depicted the composites initiated the weight loss at around 550℃ after which it was *** thermal cycling,the weight loss initiated at ~40℃ lower compared to pure salt,which was found to be a minor *** characterization of solar salt and GNP-based solar salt composites revealed that the composites can be used for enhanced heat transfer in high-temperature solar-based heat transfer and energy storage applications.

关键词： thermal energy storage high temperature solar salt graphene nanoplatelets thermal characterization

Kinematics ofmandibular advancement devices(MADs):Why do some MADs move the lower jaw backward duringmouth opening?

在线全文

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第5期7卷 637-650页

作者： Juan A.Cabrera Alex Bataller Sergio Postigo Marcos García mechanical engineering department University of Malaga29071 MalagaSpain

Mandibular advancement devices(MADs)are widely used treatments for obstructive sleep *** function by advancing the lower jaw to open the upper *** increase patient comfort,most patients allow the mouth to be ***,not all systems maintain the lower jaw in a forward position during mouth opening,which results in the production of a retrusion that favors the collapse of the upper ***,the kinematic behavior of the mechanism formed by the mandible-device assembly depends on jaw *** means that,during mouth opening,some devices cause lower jaw protrusion in some patients,but cause its retraction in *** this study,we report the behavior of well-known devices currently on *** do so,we developed a kinematic model of the lower jawdevice *** validated for all devices analyzed using a high-resolution camera *** results show that some of the devices analyzed here did not produce the correct behavior during patient mouth opening.

关键词： Mandibular advancement devices Lower jaw kinematics Sleep apnea