检索结果-南通市图书馆

Science China Technological Sciences 2025年

作者： Yan WANG Feng TIAN Jianqiang WANG Keqiang LI department of industrial and Systems Engineering The Hong Kong Polytechnic University School of Vehicle and Mobility Tsinghua University

Sideslip angle, yaw rate, and vehicle velocity are essential for intelligent vehicle control. Since these vehicle states are not measured directly, some Kalman-based approaches have been developed to estimate these states using in-vehicle sensors. However, the existing studies seldom account for the influence of sensor data loss on estimation accuracy. In addition,the process and measurement noise change during the estimation process because of the various driving conditions. To address these problems, an expectation-maximization robust extended Kalman filter (EMREKF) is proposed. Firstly, a robust extended Kalman filter (REKF) is developed to deal with the impact of missing measurements. Then, an improved expectation maximization (EM) algorithm that considers data loss is presented to update the noise parameter of the REKF dynamically. Finally,the improved EM is fused with the REKF to form the EMREKF to estimate vehicle state. The experimental results demonstrate that the EMREKF outperforms EKF, REKF, and maximum correntropy criterion EKF for various degrees of data loss and the proposed algorithm has a strong adaptive ability to different driving conditions.

关键词：

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He department of Materials Science and Engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology department of Chemical Sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Perovskite

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy:Microstructural and mechanical characterization

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 414-424页

作者： Gianluca Pirro Alessandra Martucci Alessandro Morri Mariangela Lombardi Lorella Ceschini department of industrial Engineering(DIN) Alma Mater Studiorum-University of BolognaBologna 40136Italy department of Applied Science and Technology(DISAT) Politecnico di TorinoTorino TO 10129Italy

Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)*** alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat *** as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the ***,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar *** primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation *** study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar *** each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase *** attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after *** tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed *** surface analyses were conducted to investigate fracture mechanisms.

关键词： powder bed fusion-laser beam titanium alloys heat treatments mechanical properties fractographic analysis

Using a biological aerated filter to treat mixed water-borne volatile organic compounds and assessing its emissions

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2009年第11期21卷 1497-1502页

作者： CHENG Wen-Hsi department of occupational Safety and hygiene, Fooyin University, Kaohsiung County 83102, Taiwan, China [a]department of occupational Safety and hygiene Fooyin University Kaohsiung County 83102 Taiwan China

A biological aerated filter （BAF） was evaluated as a fixed-biofilm process to remove water-borne volatile organic compounds （VOCs） from a multiple layer ceramic capacitor （MLCC） manufacturing plant in southern Taiwan. The components of VOC were identified to be toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, bromodichloromethane and isopropanol （IPA）. The full-scale BAF was constructed of two separate reactors in series, respectively, using 10- and 15-cm diameter polypropylene balls as the packing materials and a successful preliminary bench-scale experiment was performed to feasibility. Experimental results show that the BAF removed over 90% chemical oxygen demand （COD） from the influent with （1188 ± 605） mg/L of COD. A total organic loading of 2.76 kg biochemical oxygen demand （BOD）/（m3 packing·d） was determined for the packed bed, in which the flow pattern approached that of a mixed flow. A limited VOC concentration of （0.97 ± 0.29） ppmv （as methane） was emitted from the BAF system. Moreover, the emission rate of VOC was calculated using the proposed formula, based on an air-water mass equilibrium relationship, and compared to the simulated results obtained using the Water 9 model. Both estimation approaches of calculation and model simulation revealed that 0.1% IPA （0.0031-0.0037 kg/d） were aerated into a gaseous phase, and 30% to 40% （0.006-0.008 kg/d） of the toluene were aerated.

关键词： volatile organic compounds biological aerated filter total organic loading emission

Secure Channel Estimation Using Norm Estimation Model for 5G Next Generation Wireless Networks

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2025年第1期82卷 1151-1169页

作者： Khalil Ullah Song Jian Muhammad Naeem Ul Hassan Suliman Khan Mohammad Babar Arshad Ahmad Shafiq Ahmad Faculty of Information Engineering and Automation Kunming University of Science and TechnologyKunming650500China department of Computer Science Abbottabad University of Science and TechnologyHavelianAbbottabad22500Pakistan department of Computing and Electronics Engineering Middle East CollegeMuscat124Oman department of CS&IT Pak-Austria Fachhochschule Institute of Applied Sciences and Technology MangHaripur22621Pakistan industrial Engineering department College of EngineeringKing Saud UniversityRiyadh11421Saudi Arabia

The emergence of next generation networks(NextG),including 5G and beyond,is reshaping the technological landscape of cellular and mobile *** networks are sufficiently scaled to interconnect billions of users and *** in academia and industry are focusing on technological advancements to achieve highspeed transmission,cell planning,and latency reduction to facilitate emerging applications such as virtual reality,the metaverse,smart cities,smart health,and autonomous *** continuously improves its network functionality to support these *** input multiple output(MIMO)technology offers spectral efficiency,dependability,and overall performance in *** article proposes a secure channel estimation technique in MIMO topology using a norm-estimation model to provide comprehensive insights into protecting NextG network components against adversarial *** technique aims to create long-lasting and secure NextG networks using this extended *** viability of MIMO applications and modern AI-driven methodologies to combat cybersecurity threats are explored in this ***,the proposed model demonstrates high performance in terms of reliability and accuracy,with a 20%reduction in the MalOut-RealOut-Diff metric compared to existing state-of-the-art techniques.

关键词： Next generation networks massive mimo communication network artificial intelligence 5G adversarial attacks channel estimation information security

Novel Methodologies for Preventing Crack Propagation in Steel Gas Pipelines Considering the Temperature Effect

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 1-23页

作者： Nurlan Zhangabay Ulzhan Ibraimova Marco Bonopera Ulanbator Suleimenov Konstantin Avramov Maryna Chernobryvko Aigerim Yessengali department of Architecture and Urban Planning Mukhtar Auezov South Kazakhstan UniversityShymkent160012Kazakhstan department of industrial Civil and Road Construction Mukhtar Auezov South Kazakhstan UniversityShymkent160012Kazakhstan Mechanics Sound&Vibration LaboratoryDepartment of Civil EngineeringCollege of EngineeringNational Taiwan UniversityTaipei10617Taiwan department of Reability&Dynamic Strength A.Pidhornyi Institute of Mechanical Engineering Problems of National Academy of Sciences of UkraineKharkiv61046Ukraine

Using the software ANSYS-19.2/Explicit Dynamics,this study performedﬁnite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire *** effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also *** results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum *** analysis of the inﬂuence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire *** increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the inﬂuence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline *** analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length *** such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline signiﬁcantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of *** work integrated the existing methods for crack localization along steel gas pipelines.

关键词： Crack propagation ﬁnite-element internal pressure prestressing steel gas pipeline temperature effect

Detailing Losses in the M/M/1/1 Transient Loss System

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematicae Applicatae Sinica 2018年第2期34卷 373-385页

作者： Pierpaolo FERRANTE National Workers Compensation Authority (INAIL) Department of Occupational and Environmental Medicine Epidemiology and Hygiene (DiMEILA)

This paper is aimed at investigating the transient losses in the M/M/1/1 Erlang loss system. We evaluate the explicit form of the probability distribution of the number of losses in the time interval [0, t） and provide two alternative representations： one based on the iterated derivatives of hyperbolic sinus and cosine and the other on the spherical modified Bessel function of the second kind. The mathematical structures of the transient loss rate and of the transient probability of losing all customers are described and several analytical properties are derived.

关键词： transient losses transient loss rate Erlang bessel functions

Effect of Progressive Substitution of Cement and Lime by Powdered Shells Used as a Curing Agent for Dredged Soil in a Port Area

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 88-102页

作者： SUN Yang WANG Faxin SU Yaying LI Yiwei HE Feng College of Harbour Coastal and Offshore EngineeringHohai UniversityNanjing 210098China Huai'an Research Institute Hohai UniversityHuai'an 223025China Jiangsu Fangyang industrial Investment Corp.Ltd. Lianyungang 210098China

This study aimed to address the challenges of solid waste utilization,cost reduction,and carbon reduction in the treatment of deep-dredged soil at Xuwei Port in Lianyungang city of *** research in this area was ***,a curing agent made from powdered shells was used to solidify the dredged soil in *** employed laboratory orthogonal tests to investigate the physical and mechanical properties of the powdered shell-based curing *** was collected by conducting experiments to assess the role of powdered shells in the curing process and to determine the optimal ratios of powdered shells to solidified soil for different *** development of strength in solidified soil was studied in both seawater and pure water *** study revealed that the strength of the solidified soil was influenced by the substitution rate of powdered shells and their interaction with *** cement content had a positive effect on *** high-strength solidified soil,the recommended ratio of wet soil:cement:lime:powdered shells were 100:16:4:4,while for low-strength solidified soil,the recommended ratio was 100:5.4:2.4:***,under appropriate conditions,improved short-term strength by promoting the formation of expansive ettringite minerals that contributed to cementation and *** findings suggest that the combination of cement and powdered shells is synergistic,positively affecting the strength of solidified *** recommended ratios provide practical guidance for achieving desired strength levels while considering factors such as cost and carbon *** role of seawater in enhancing short-term strength through crystal formation is noteworthy and can be advantageous for certain *** conclusion,this research demonstrates the potential of using a powdered shell-based curing agent for solidifying dredged soil in an environmentally friendly and cost-effective *** recommended ratios for different str

关键词： carbon reduction and solidification dredged soil abandoned shells orthogonal test chemical additives(lime and cement) unconfined compressive strength(UCS)

Studies on Mechanisms and Blockade of Carcinogenic Action of Female Sex Hormones

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 1994年第4期37卷 418-429页

作者：高凤鸣蒋涵英余璐李新兰王文惠段云波周红宁 Laboratory of industrial hygiene Ministry of Public Health Beijing 100088 PRC

Tumours of mice are induced by administration of Inj. Hydroxyprogesteroni Caproatis Co. (EP) in a practical subthreshold dose of carcinogenesis or 2. 5-5 times the human contraceptive dose (simply referred to as 2. 5- to 5-fold dose) combined with whole-body 0. 5 Gy gamma-ray irradiation. Malignant transformation of Syrian golden hamster embryo (SHE) cells is also induced by 5-fold dose of EP combined with 0. 3 Gy gamma-ray irradiation in vitro, thereby indicating that synergistic carcinogenesis can be obtained by combined use of physical and chemical *** mechanisms of synergistic carcinogenesis have been further explained by cytogenetics, damage extent of the target cell DNA and production of free radicals. The Chinese traditional medicine with antioxidat-ing effect (Sulekang Capsule, SC), food additive--butylated hydroxyanisole (BHA) and green tea can effectively inhibit the carcinogenic effect of EP or EP combined with gamma rays in mice. They all have marked ability to scavenge or remove the free radicals and thereby reduce the DNA damage.

关键词： female sex hormones gamma rays carcinogenesis green tea free radicals.

Performance of passive and reactive profiled median barriers in traffic noise reduction

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2011年第1期12卷 78-86页

作者： Mohammad Reza MONAZZAM Samaneh Momen Bellah FARD occupational hygiene department School of Public HealthTehran University of Medical Sciences department of Environmental Science Graduate School of the Environment and EnergyScience and Research BranchIslamic Azad University

Median noise barriers, like parallel noise barriers, can be employed to reduce the impact of traffic on roadside communities via the direct propagation path. The performance of different shapes of median barriers was compared using reactive and passive surfaces and a 2D boundary element method (BEM). In the case of reactive surfaces, quadratic residue diffusers (QRDs) and primitive root diffusers (PRDs) were used on the top and stem surfaces of median barriers. To introduce passive barriers, two different absorbent materials including fibrous material and a grass surface with flow resistivity of 20 000 and 2500 kg/(s·m2), respectively, were similarly applied. The effect of thin absorptive barriers was similar at lower frequencies and better at mid and high frequencies to that of their equivalent rigid barriers. More improvement was achieved by covering the top surface of thick barriers with grass rather than with fibrous material. The performance of QRD and PRD barriers where the diffuser was located on the top surface was more frequency dependent than that of barriers coated with fibrous material. A comparison of the average A-weighted insertion loss in the thick barriers showed that the greatest improvement (2.59 dB (A)) was achieved using a barrier of 30-cm thickness covered with grass.

关键词： Absorption Quadratic residue diffuser (QRD) Primitive root diffuser (PRD) Noise barrier