检索结果-南通市图书馆

Journal of Wuhan University of Technology(Materials Science) 2024年第2期39卷 320-326页

作者：李涛凌帅 ZHONG Shujie LOU Qiongyue department of Materials engineering School of Mechanical EngineeringChengdu UniversityChengdu 610106China

Ni^(2+)/Cu^(2+)/SO_(4)^(2-)/polyvinyl alcohol precursor fibers with uniform diameters were prepared through ***-based composite nanoalloys containing Ni,Cu,and S were prepared through heat treatment in an Ar *** experimental results show that the main components of the prepared nanoalloys are NiCu,Ni_(3)S_(2),Ni,and *** nanoalloys exhibit fine grain sizes about 200-500 nm,which can increase with increasing heat treatment *** test results show that the nickel sulfidemodified NiCu nanoalloy composites exhibit excellent oxygen evolution reaction properties,and the oxygen evolution reaction properties gradually improve with the increasing heat treatment *** sample prepared at 1 000℃ for 40 min show a low overpotential of 423 mV and a small Tafel slope of 134 mV·dec^(-1) at a current density of 10 mA·cm^(-2).

关键词： NiCu nanoalloy Ni_(3)S_(2) structure transformation oxygen evolution reaction

Auto-parametric resonance of a continuous-beam-bridge model under two-point periodic excitation:an experimental investigation and stability analysis

在线全文

学校读者我要写书评

暂无评论

Earthquake engineering and engineering Vibration 2024年第2期23卷 445-454页

作者： Li Yuchun Shen Chao Liu Wei Li Dong department of Hydraulic engineering College of Civil EngineeringTongji UniversityShanghai 200092China

The auto-parametric resonance of a continuous-beam bridge model subjected to a two-point periodic excitation is experimentally and numerically investigated in this *** auto-parametric resonance experiment of the test model is conducted to observe and measure the auto-parametric resonance of a continuous beam under a two-point excitation on *** parametric vibration equation is established for the test model using the finite-element *** auto-parametric resonance stability of the structure is analyzed by using Newmark's method and the energy-growth exponent *** effects of the phase difference of the two-point excitation on the stability boundaries of auto-parametric resonance are studied for the test *** with the experiment,the numerical instability predictions of auto-parametric resonance are consistent with the test phenomena,and the numerical stability boundaries of auto-parametric resonance agree with the experimental *** a continuous beam bridge,when the ratio of multipoint excitation frequency(applied to the columns)to natural frequency of the continuous girder is approximately equal to 2,the continuous beam may undergo a strong auto-parametric *** with the present experiment and analysis,a hypothesis of Volgograd Bridge's serpentine vibration is discussed.

关键词： auto-parametric resonance continuous beam bridge model two-point excitation experimental investigation stability analysis vibration of Volgograd Bridge

Effect of cooling media on bead geometry,microstructure,and mechanical properties of wire arc additive manufactured IN718 alloy

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第1期12卷 124-149页

作者： Parveen Kumar Satish Kumar Sharma Ratnesh Kumar Raj Singh department of Mechanical engineering Thapar Institute of Engineering and TechnologyPatialaPunjab147004India

This work aims to present and explore thermal management techniques for the wire arc additive manufacturing(WAAM)of IN718 *** heat can be mitigated via air or water *** this study,the material was deposited under four different heat-input conditions with air or water *** air cooling,the layer is deposited in a normal atmospheric air environment,whereas with water cooling,the material is deposited inside a water tank by varying the water *** validate the air and water cooling thermal management techniques,IN718 single-pass and multilayer linear walls were deposited using the bidirectional gas metal arc welding based WAAM setup under four different heat input *** the deposition of single layers,the temperature profiles were recorded,and the geometric and microstructural features were *** multilayer wall structures,the mechanical properties(hardness,tensile strength,and elongation)were determined and assessed using the corresponding microstructural features explored through scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and electron backscatter diffraction(EBSD)*** microstructure observed through SEM analysis in the building direction was found to be nonhomogenous compared with that in the deposition ***,water cooling was found to govern bead characteristics,such as wall width and *** grain size and anisotropy of the mechanical properties also decreased in the water-cooled ***,water cooling is an economical and efficient method to mitigate excessive heat accumulation in WAAM-deposited IN718.

关键词： Air cooling Water cooling IN718 Bead characteristics Microstructure Electron backscatter diffraction(EBSD)

Stable Cycling of All-Solid-State Lithium Metal Batteries Enabled by Salt engineering of PEO-Based Polymer Electrolytes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第2期7卷 71-78页

作者： Lujuan Liu Tong Wang Li Sun Tinglu Song Hao Yan Chunli Li Daobin Mu Jincheng Zheng Yang Dai department of Chemical engineering Shanghai University School of Material Science & engineering Beijing Key Laboratory of Environmental Science and Engineering Beijing Institute of Technology department of Physics Xiamen University

Poly（ethylene oxide）(PEO)-based polymer electrolytes show the prospect in all-solid-state lithium metal batteries;however,they present limitations of low room-temperature ionic conductivity,and interfacial incompatibility with high voltage ***,a salt engineering of 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide lithium salt（LiHFDF）/LiTFSI system was developed in PEO-based electrolyte,demonstrating to effectively regulate Li ion transport and improve the interfacial stability under high *** show,by manipulating the interaction between PEO matrix and TFSI--HFDF-,the optimized solid-state polymer electrolyte achieves maximum Li+conduction of 1.24×10-4S cm-1at 40℃,which is almost 3 times of the ***,the optimized polymer electrolyte demonstrates outstanding stable cycling in the LiFePO4/Li and LiNi0.8Mn0.1Co0.1O2/Li（3.0-4.4 V,200 cycles） based all-solid-state lithium batteries at 40℃.

关键词： all-solid-state battery high voltage li-ion conductivity molecular interaction poly(ethylene oxide)

Optical design of a novel near-infrared phase contrast imaging(NI-PCI)diagnostic on the HL-2A tokamak

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Plasma Science and Technology 2024年第3期26卷 31-37页

作者：徐皓龚少博余羿许敏兰涛王志斌石中兵聂林赵光义刘灏周艺轩袁子豪肖晨雨陈坚 Sino-French Institute of nuclear engineering and Technology Sun Yat-sen UniversityZhuhai 519082People's Republic of China Southwestern Institute of Physics Chengdu 610041People's Republic of China School of nuclear Science and Technology University of Science and Technology of ChinaHefei 230026People's Republic of China

The optical design of near-infrared phase contrast imaging(NI-PCI)diagnosis on HL-2A is introduced in this *** scheme benefits from the great progress of near-infrared laser technology and is a broadening of traditional phase contrast *** diagnostic can work as a keen tool to measure plasma wavenumber spectra by inferring string-integrated plasma density *** of both the front optical path which is the path before the laser transmitting into the tokamak plasma and the rear optics which is the path after the laser passing through the plasma is *** 1550 nm laser is chosen as the probe beam and highprecision optical components are designed to fit the laser beam,in which a phase plate with a 194-nm-deep silver groove is the *** with the conventional 10.6μm laser-based PCI system on HL-2A,NI-PCI significantly overcomes the unwanted phase scintillation effect and promotes the measurement capability of high-wavenumber turbulence with an increased maximal measurable wavenumber from 15 cm^(-1)to 32.6 cm^(-1).

关键词： phase contrast imaging near infrared laser plasma laser diagnostic

Advancements in enhancing corrosion protection of Mg alloys:A comprehensive review on the synergistic effects of combining inhibitors with PEO coating

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 465-489页

作者： Arash Fattah-alhosseini Abdelhameed Fardosi Minoo Karbasi Mosab Kaseem department of Materials engineering Faculty of EngineeringBu-Ali Sina UniversityHamedanIran department of Nanotechnology and Advanced Materials engineering Sejong UniversitySeoul 05006Republic of Korea

Magnesium(Mg)alloys are lightweight materials with excellent mechanical properties,making them attractive for various applications,including aerospace,automotive,and biomedical ***,the practical application of Mg alloys is limited due to their high susceptibility to *** electrolytic oxidation(PEO),or micro-arc oxidation(MAO),is a coating method that boosts Mg alloys'corrosion ***,despite the benefits of PEO coatings,they can still exhibit certain limitations,such as failing to maintain long-term protection as a result of their inherent *** address these challenges,researchers have suggested the use of inhibitors in combination with PEO coatings on Mg *** are chemical compounds that can be incorporated into the coating or applied as a post-treatment to further boost the corrosion resistance of the PEO-coated Mg *** inhibitors,whether organic or inorganic,can act by forming a protective barrier,hindering the corrosion process,or modifying the surface properties to reduce susceptibility to *** can be made of various materials,including polyelectrolyte shells,layered double hydroxides,polymer shells,and mesoporous inorganic *** corrosion inhibitors in containers fully compatible with the coating matrix and substrate is a promising approach for their *** studies of the combination of inhibitors with PEO coatings on Mg alloys have shown promising results,demonstrating significant corrosion mitigation,extending the service life of Mg alloy components in aggressive environments,and providing self-healing *** general,this review presents available information on the incorporation of inhibitors with PEO coatings,which can lead to improved performance of Mg alloy components in demanding environments.

关键词： Inhibitor Mg alloy Self-healing coating Plasma electrolytic oxidation(PEO) Corrosion protection

Uncertainty and sensitivity analysis of in-vessel phenomena under severe accident mitigation strategy based on ISAA-SAUP program

在线全文

学校读者我要写书评

暂无评论

nuclear Science and Techniques 2024年第1期35卷 108-123页

作者： Hao Yang Ji-Shen Li Zhi-Ran Zhang Bin Zhang Jian-Qiang Shan School of nuclear Science and Technology Xi’an Jiaotong UniversityXi’an 710049China State Key Laboratory of Multiphase Flow in Power engineering Xi’an Jiaotong UniversityXi’an 710049China

The phenomenology involved in severe accidents in nuclear reactors is highly ***,integrated analysis programs used for severe accident analysis heavily rely on custom empirical parameters,which introduce considerable ***,in recent years,the field of severe accidents has shifted its focus toward applying uncertainty analysis methods to quantify uncertainty in safety assessment programs,known as“best estimate plus uncertainty(BEPU).”This approach aids in enhancing our comprehension of these programs and their further development and *** study concentrates on a third-generation pressurized water reactor equipped with advanced active and passive mitigation *** an Integrated Severe Accident Analysis Program(ISAA),numerical modeling and uncertainty analysis were conducted on severe accidents resulting from large break loss of coolant *** uncertainty parameters of the ISAA program were meticulously *** Wilks'formula,the developed uncertainty program code,SAUP,was employed to carry out Latin hypercube sampling,while ISAA was employed to execute batch *** analysis was then conducted on two figures of merit,namely hydrogen generation and the release of fission products within the pressure *** calculations revealed that hydrogen production and the fraction of fission product released exhibited a normal distribution,ranging from 182.784 to 330.664 kg and from 15.6 to 84.3%,*** ratio of hydrogen production to reactor thermal power fell within the range of 0.0578–0.105.A sensitivity analysis was performed for uncertain input parameters,revealing significant correlations between the failure temperature of the cladding oxide layer,maximum melt flow rate,size of the particulate debris,and porosity of the debris with both hydrogen generation and the release of fission products.

关键词： Gen-III PWR Severe accident mitigation Wilks’formula Hydrogen Fission products Uncertainty and sensitivity analysis

Heat and mass transfer of a circular porous moist object located in a triangular shaped vented cavity

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第6期31卷 1956-1972页

作者： SELIMEFENDIGIL Fatih OZCAN COBAN Seda OZTOP Hakan F department of Mechanical engineering College of EngineeringKing Faisal UniversityAl Ahsa 31982Saudi Arabia department of Mechanical engineering Manisa Celal Bayar UniversityManisa 45140Turkey department of Mechanical engineering Technology FacultyFırat UniversityElazığTurkey

Heat and mass transfer of a circular-shaped porous moist object inside a two-dimensional triangle cavity is investigated by using finite element *** porous object is considered to be a moist food sample,located in the middle of the cavity with inlet and outlet ports with different configurations of inlet/outlet *** drying performance is numerically assessed for different values of Reynolds numbers(between 50 and 250),dry air inlet temperature(between 40 and 80℃)and different locations of the *** is observed that changing the port locations has significant impacts on the flow recirculaitons inside the triangular chamber while convective drying performance is highly *** moisture content reduces with longer time and for higher Reynolds number(Re)*** P4 where inlet and outlet ports are in the middle of the walls provides the most effective configuration in terms of convective drying performance while the worst case is seen for P1 case where inlet and outlet are closer to the corners of the *** is a 192% difference between the moisture reduction of these two cases at Re=250,T=80℃ and t=120 min.

关键词： convective drying porous domain cavity flow inlet/exit port finite element method

Synthesis and Thermal Characterization of Solar Salt-Based Phase Change Composites with Graphene Nanoplatelets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 491-500页

作者： Pethurajan VIGNESHWARAN Saboor SHAIK Sivan SURESH Müslüm ARICI Asif AFZAL department of Thermal and Energy engineering School of Mechanical Engineering(SMEC)Vellore Institute of TechnologyVelloreTamil NaduIndia Nanotechnology Research Laboratory Department of Mechanical EngineeringNational Institute of TechnologyTiruchirappalliTamil NaduIndia Mechanical engineering department Engineering FacultyKocaeli UniversityUmuttepe CampusKocaeli41001Turkey department of Mechanical engineering P.A.College of Engineering(affiliated to Visvesvaraya Technological UniversityBelagavi)Mangaluru574153India

Thermal energy storage(TES) systems use solar energy despite its irregular availability and day-night temperature *** work reports the thermal characterizations of solar salt-based phase change composites in the presence of graphene nanoplatelets(GNP).Solar salt(60:40 of NaNO_(3):KNO_(3)) possessing phase transition temperature and melting enthalpy of 221.01℃ and 134.58 kJ/kg is proposed as a phase change material(PCM) for high-temperature solar-based energy storage *** conductivity must be improved to make them suitable for widespread applications and to close the gap between the system needs where they are *** is added at weight concentrations of 0.1%,0.3%,and 0.5% with solar salt using the ball milling method to boost its thermal *** studies indicated the formation of a uniform surface of GNP on solar *** spectrum peaks identified the physical interaction between salt and *** characterization of the composites,such as thermal conductivity,DSC and TGA was carried out for the samples earlier and later 300 thermal cycles.0.5% of GNP has improved the thermal conductivity of salt by 129.67% and after thermal cycling,the enhancement reduced to 125.21% indicating that thermal cycling has a minor impact on thermal *** change temperature decreased by around 2.32% in the presence of0.5% GNP and the latent heat reduced by 4.34% after thermal *** thermograms depicted the composites initiated the weight loss at around 550℃ after which it was *** thermal cycling,the weight loss initiated at ~40℃ lower compared to pure salt,which was found to be a minor *** characterization of solar salt and GNP-based solar salt composites revealed that the composites can be used for enhanced heat transfer in high-temperature solar-based heat transfer and energy storage applications.

关键词： thermal energy storage high temperature solar salt graphene nanoplatelets thermal characterization

Study of poly-disperse aerosols deposition in turbulent flow with different Reynolds numbers

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第6期89卷 32-43页

作者： Zhichao Gao Yongzheng Chen Dandi Zhang Peng Chen Lili Tong Xuewu Cao School of Mechanical engineering Shanghai Jiao Tong UniversityShanghai200240China China nuclear Power Technology Research Institute Co. Ltd.Shenzhen518000China

The turbulent deposition mechanism is one of the main mechanisms of aerosol deposition in nuclear power plant *** experimental study of poly-disperse aerosol deposition in a horizontal tube is conducted,where the nominal Reynolds number(Re)is in a range of 3600–200,*** aerosol deposition velocity first increases and then decreases with the increase of Res,and at high Re,particle rebound occurs during aerosol deposition in the *** the Re is low,the aerosol deposition velocity increases with the increase of aerosol *** the Re is greater than 60,000,the deposition velocity first increases and then decreases with the increase of aerosol diameter due to particle surface rebound.A new aerosol deposition model has been developed by establishing the energy conservation equation of the rebounded particles in the viscous *** calculated results of the new model are in good agreement with these experimental results,and the error between the aerosol deposition velocity calculated by the model and experimental results is between−60%and 150%.

关键词： Aerosol Turbulent deposition Rebound High Reynolds number