检索结果-南通市图书馆

Influence of the zigzag fins and inlet arrangements on the cooling proficiency of the mini-channel heat sink

Propulsion and Power Research 2024年第2期13卷 194-206页

作者： A.Torbatinezhad Y.Pahamli M.J.Hosseini R.Bahrampoury School of mechanical engineering Babol University of TechnologyBabolIran department of mechanical engineering Semnan UniversitySemnanIran department of mechanical engineering Faculty of EngineeringGolestan UniversityGorganIran department of mechanical engineering K.N.Toosi University of TechnologyTehranIran

Mini-channel heatsinks are one of the most effective thermal management methods for high heatﬂux devices due to the high performance of convective heat *** recent years,various techniques have been innovated to improve the thermal proﬁciency of the mini-channel *** of these are taking advantage ofﬁns’structural designs and ar-rangements of inlets and *** zigzagﬁns and channels were considered in the previous works in heatsinks,and researchers analyzed their cooling enhancement ***,in the present work,a combined cooling technique,considering new-type zigzagﬁns’geometrical parameters(arrangement,length,and height)causes turbulenceﬂow and higher convective heat transfer along with different positionings ofﬂow inlet and outlets resulting in superior temper-ature uniformity,is proposed to evaluate their impacts on the cooling proﬁciency of the heat sink versus different Reynolds *** assess the thermal and hydraulic performance of the proposed heatsink,different parameters,including temperature contours,Nusselt numbers,thermal resistance,and entropy generation are *** a result,it is observed that in the case demonstrating the best thermal performance,the Nusselt number,pressure drop,thermal resistance,and entropy generation are respectively 37.13,4586.46 Pa,0.000078 m^(2)·K/W,and 0.1078 W/K in the best *** well,it is found that by changing the arrangements of inlets and outlets,the Nusselt number,and thermal resistance are improved by 12%and 13%,***,the proposed mini-channel heat sink could be used as a high-performance thermal management system for electronic devices in different industries,including energy,solar,and medical sectors.

关键词： Thermal management Heat transfer enhancement Mini-channel heatsink Zigzagﬁn Entropy generation Electronic cooling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prediction of corrosion rate for friction stir processed WE43 alloy by combining PSO-based virtual sample generation and machine learning

引用

Journal of Magnesium and Alloys 2024年第4期12卷 1518-1528页

作者： Annayath Maqbool Abdul Khalad Noor Zaman Khan department of mechanical engineering National Institute of Technology SrinagarJ&K 190006India department of mechanical engineering Indian Institute of TechnologyHyderabadSangareddyTelangana 502284India School of engineering Deakin UniversityVictoria 3216Australia

The corrosion rate is a crucial factor that impacts the longevity of materials in different *** undergoing friction stir processing(FSP),the refined grain structure leads to a notable decrease in corrosion ***,a better understanding of the correlation between the FSP process parameters and the corrosion rate is still *** current study used machine learning to establish the relationship between the corrosion rate and FSP process parameters(rotational speed,traverse speed,and shoulder diameter)for WE43 *** Taguchi L27 design of experiments was used for the experimental *** addition,synthetic data was generated using particle swarm optimization for virtual sample generation(VSG).The application of VSG has led to an increase in the prediction accuracy of machine learning models.A sensitivity analysis was performed using Shapley Additive Explanations to determine the key factors affecting the corrosion *** shoulder diameter had a significant impact in comparison to the traverse speed.A graphical user interface(GUI)has been created to predict the corrosion rate using the identified *** study focuses on the WE43 alloy,but its findings can also be used to predict the corrosion rate of other magnesium alloys.

关键词： Corrosion rate Friction stir processing Virtual sample generation Particle swarm optimization Machine learning Graphical user interface

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental Study on Heat Storage Properties Comparison of Paraffin/Metal Foams Phase Change Material Composites

引用

Journal of Thermal Science 2024年第2期33卷 469-478页

作者： Waqar AHMED Abid HUSSAIN Hanzla SHAHID Imran ALI Hafiz Muhammad ALI department of mechanical engineering University of Engineering and TechnologyTaxila47080Pakistan department of mechanical engineering Institute of Space TechnologyIslamabadPakistan department of mechanical Mechatronics and Manufacturing EngineeringUniversity of Engineering and Technology LahoreFaisalabad CampusPunjabPakistan mechanical engineering department King Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia Interdisciplinary Research Center for Renewable Energy and Power Systems(IRC-REPS) King Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia

Heat storage properties of phase change materials(PCMs) are essential characteristics that perform a key role in thermal heat energy storage *** thermal properties of PCMs can be improved by developing metal foam/PCM *** addition of metal foam in PCMs has a significant effect on the thermal characteristics of *** this paper,the heat storage properties of two different metal foam/PCM composites were experimentally *** behavior of paraffin in metal foam(copper and iron-nickel)/paraffin composites concerning pure paraffin at a constant heat flux of 1000 W/m^(2) in three directions simultaneously(x,y,and z) was *** was infiltrated into copper and iron-nickel foams to develop composite materials which resulted in enhancing the thermal conductivity of the paraffin.A comparative analysis is made on the heat storage properties of paraffin in copper and iron-nickel foams/paraffin *** temperature distribution during the phase transition process is experimentally *** comparison indicates that temperature uniformity in copper foam/paraffin composite is better than in iron-nickel foam/paraffin composite and pure paraffin at the same heat *** results show that at heat flux of 1000 W/m^(2),the heat storage time for copper foam/paraffin composite is 20.63% of that of iron-nickel foam/paraffin composite.

关键词： heat storage capacity paraffin/metal foam composite temperature uniformity heat storage rate phase transition process

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cryogenic and conventional milling of AZ91 magnesium alloy

引用

Journal of Magnesium and Alloys 2024年第6期12卷 2503-2519页

作者： Vikas Marakini Srinivasa Pai P Gururaj Bolar Bhaskara P Achar department of mechanical engineering Nitte(Deemed to be University)NMAM Institute of Technology(NMAMIT)Nitte 574110India department of mechanical and Industrial engineering Manipal Institute of TechnologyManipal Academy of Higher EducationManipal 576104India

Use of magnesium is the need of the hour due to its low density as well as its high strength-to-weight and stiffness-to-weight ratio *** study focuses on the effectiveness of liquid nitrogen(LN_(2))assisted cryogenic machining on the surface integrity(SI)characteristics of AZ91 magnesium *** milling using uncoated carbide inserts have been performed under liquid nitrogen(LN_(2))assisted cryogenic condition and compared with conventional(dry)*** are performed using machining parameters in terms of cutting speeds of 325,475,625 m/min,feed rates of 0.05,0.1,0.15 mm/teeth and depth of cuts of 0.5,1,1.5 mm *** significant surface integrity characteristics such as surface roughness,microhardness,microstructure,and residual stresses have been *** of SI characteristics with respect to milling parameters have been identified using statistical technique such as ANOVA and signal-to-noise(S/N)ratio ***,the multi criteria decision making(MCDM)techniques such as additive ratio assessment method(ARAS)and complex proportional assessment(COPRAS)have been utilized to identify the optimal conditions for milling AZ91 magnesium alloy under both dry and cryogenic *** of LN_(2)during machining,resulted in reduction in machining temperature by upto 29%with a temperature drop from 251.2℃under dry condition to 178.5℃in cryogenic *** showed the advantage of performing cryogenic milling in improving the surface integrity to a significant *** machining considerably minimized the roughness by upto 28%and maximised the microhardness by upto 23%,when compared to dry *** speed has caused significant impact on surface roughness(95.33%-dry,92.92%-cryogenic)and surface microhardness(80.33%-dry,82.15%-cryogenic).Due to the reduction in machining temperature,cryogenic condition resulted in compressive residual stresses(maximumσ║=-113 MPa)on the alloy *** indicate no

关键词： Magnesium alloy Cryogenic machining Roughness Microhardness Microstructure Residual stress Multi criteria decision making

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancement of mechanical and tribological performance of Ti-6Al-4V alloy by laser surface alloying with Inconel 625 and SiC precursor materials

引用

Friction 2024年第9期12卷 2089-2107页

作者： Hao-Ran CHENG Ki-Hoon SHIN Hong Seok KIM department of mechanical engineering Graduate School of Seoul National University of Science and TechnologySeoul 01811Republic of Korea department of mechanical and Automotive engineering Seoul National University of Science and TechnologySeoul 01811Republic of Korea

This study focused on producing metal matrix composite(MMC)coatings on Ti–6Al–4V alloy through laser surface alloying using a novel combination of Inconel 625 and SiC precursor *** ratios of alloying powders were examined to evaluate surface properties such as microhardness,wear resistance,and friction coefficient,along with analyzing the phase composition and microstructure of the *** in situ synthesized MMC coatings exhibited the presence ofα-Ti,NiTi,NiTi_(2),and TiC ***,Ti_(5)Si_(3)andα-Ti/Ti_(5)Si_(3)eutectic structures were observed when the SiC content exceeded 20%.In comparison to the titanium substrate,the MMC coating significantly enhanced microhardness by over threefold and reduced wear by 95%.However,it was crucial to carefully select the appropriate combination of alloying powders to avoid a substantial decrease in friction performance and excessive formation of *** a comparative analysis of experimental results,the optimal precursor material composition was identified as 85%Inconel 625 and 15%*** study demonstrated the effective utilization of Inconel 625 and SiC alloying materials to enhance the surface properties of titanium alloys,thereby expanding their application in challenging environments.

关键词： titanium alloy Inconel 625 SiC ceramic laser surface alloying metal matrix composite(MMC)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flexible sensors with zero Poisson's ratio

引用

National Science Review 2024年第5期11卷 153-169页

作者： Xin Huang Tianzhao Bu Qingyang Zheng Shaoyu Liu Yangyang Li Han Fang Yuqi Qiu Bin Xie Zhouping Yin Hao Wu department of mechanical engineering Flexible Electronics Research Center State Key Laboratory of Intelligent Manufacturing Equipment and Technology School of Mechanical Science and EngineeringHuazhong University of Science and Technology department of Electronic Science and technology School of Integrated CircuitsHuazhong University of Science and Technology

Flexible sensors have been developed for the perception of various stimuli. However, complex deformation,usually resulting from forces or strains from multi-axes, can be challenging to measure due to the lack of independent perception of multiaxial stimuli. Herein, flexible sensors based on the metamaterial membrane with zero Poisson's ratio(ZPR) are proposed to achieve independent detection of biaxial stimuli. By deliberately designing the geometric dimensions and arrangement parameters of elements, the Poisson's ratio of an elastomer membrane can be modulated from negative to positive, and the ZPR membrane can maintain a constant transverse dimension under longitudinal stimuli. Due to the accurate monitoring of grasping force by ZPR sensors that are insensitive to curvatures of contact surfaces, rigid robotic manipulators can be guided to safely grasp deformable objects. Meanwhile, the ZPR sensor can also precisely distinguish different states of manipulators. When ZPR sensors are attached to a thermal-actuation soft robot, they can accurately detect the moving distance and direction. This work presents a new strategy for independent biaxial stimuli perception through the design of mechanical metamaterials, and may inspire the future development of advanced flexible sensors for healthcare, human–machine interfaces and robotic tactile sensing.

关键词： zero Poisson's ratio metamaterials independent perception of multiaxial stimuli flexible sensor

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

In Situ Growth of 2D Metal–Organic Framework Ion Sieve Interphase for Reversible Zinc Anodes

引用

Energy & Environmental Materials 2024年第6期7卷 158-166页

作者： Jing Sun Qinping Jian Bin Liu Pengzhu Lin Tianshou Zhao department of mechanical and Aerospace engineering The Hong Kong University of Science and TechnologyClear Water BayKowloonHong Kong SARChina department of mechanical and Energy engineering Southern University of Science and TechnologyShenzhen 518055China

Zinc metal anodes are gaining popularity in aqueous electrochemical energy storage systems for their high safety,cost-effectiveness,and high ***,the service life of zinc metal anodes is severely constrained by critical challenges,including dendrites,water-induced hydrogen evolution,and *** this study,a protective two-dimensional metal–organic framework interphase is in situ constructed on the zinc anode surface with a novel gel vapor deposition *** ultrathin interphase layer(~1μm)is made of layer-stacking 2D nanosheets with angstrom-level pores of around 2.1Å,which serves as an ion sieve to reject large solvent–ion pairs while homogenizes the transport of partially desolvated zinc ions,contributing to a uniform and highly reversible zinc *** the shielding of the interphase layer,an ultra-stable zinc plating/stripping is achieved in symmetric cells with cycling over 1000 h at 0.5 mA cm−2 and~700 h at 1 mA cm^(−2),far exceeding that of the bare zinc anodes(250 and 70 h).Furthermore,as a proof-of-concept demonstration,the full cell paired with MnO_(2) cathode demonstrates improved rate performances and stable cycling(1200 cycles at 1 A g−1).This work provides fresh insights into interphase design to promote the performance of zinc metal anodes.

关键词： 2D MOF desolvation interphase ion sieve zinc anode

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Quasi-periodic orbits of small solar sails with time-varying attitude around Earth–Moon libration points

引用

Astrodynamics 2024年第1期8卷 161-174页

作者： Toshihiro Chujo department of mechanical engineering School of EngineeringTokyo Institute of TechnologyTokyo152-8550Japan

This paper proposes new quasi-periodic orbits around Earth–Moon collinear libration points using solar *** including the time-varying sail orientation in the linearized equations of motion for the circular restricted three-body problem(CR3BP),four types of quasi-periodic orbits(two types around L1 and two types around L2)were *** them,one type of orbit around L2 realizes a considerably small geometry variation while ensuring visibility from the Earth if(and only if)the sail acceleration due to solar radiation pressure is approximately of a certain magnitude,which is much smaller than that assumed in several previous *** means that only small solar sails can remain in the vicinity of L2 for a long time without propellant *** orbits designed in the linearized CR3BP can be translated into nonlinear CR3BP and high-fidelity ephemeris models without losing geometrical *** this study,new quasi-periodic orbits are formulated,and their characteristics are ***,their extendibility to higher-fidelity dynamic models was verified using numerical examples.

关键词： solar sail libration point orbit Earth-Moon system circular restricted three-body problem(CR3BP)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Machine-learned wearable sensors for real-time hand-motion recognition: toward practical applications

引用

National Science Review 2024年第2期11卷 231-263页

作者： Kyung Rok Pyun Kangkyu Kwon Myung Jin Yoo Kyun Kyu Kim Dohyeon Gong Woon-Hong Yeo Seungyong Han Seung Hwan Ko department of mechanical engineering Seoul National University IEN Center for Human-Centric Interfaces and engineering Institute for Electronics and NanotechnologyGeorgia Institute of Technology School of Electrical and Computer engineering Georgia Institute of Technology department of Chemical engineering Stanford University department of mechanical engineering Ajou University George W.Woodruff School of mechanical engineering Georgia Institute of Technology Institute of Advanced Machinery and Design(SNU-IAMD) Seoul National University

Soft electromechanical sensors have led to a new paradigm of electronic devices for novel motion-based wearable applications in our daily lives. However, the vast amount of random and unidentified signals generated by complex body motions has hindered the precise recognition and practical application of this technology. Recent advancements in artificial-intelligence technology have enabled significant strides in extracting features from massive and intricate data sets, thereby presenting a breakthrough in utilizing wearable sensors for practical applications. Beyond traditional machine-learning techniques for classifying simple gestures, advanced machine-learning algorithms have been developed to handle more complex and nuanced motion-based tasks with restricted training data sets. Machine-learning techniques have improved the ability to perceive, and thus machine-learned wearable soft sensors have enabled accurate and rapid human-gesture recognition, providing real-time feedback to users. This forms a crucial component of future wearable electronics, contributing to a robust human–machine interface. In this review, we provide a comprehensive summary covering materials, structures and machine-learning algorithms for hand-gesture recognition and possible practical applications through machine-learned wearable electromechanical sensors.

关键词： wearable sensor soft electronics artificial intelligence machine learning human–machine interfaces gesture recognition

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Comparative analysis of single-crater parameters in ultrasonic-assisted and unassisted micro-EDM of Ti6Al4V using discharge plasma imaging

引用

Nanotechnology and Precision engineering 2024年第2期7卷 11-24页

作者： Sohaib Raza Chandrakant Nirala department of mechanical engineering Indian Institute of Technology RoparPunjab 140001India

Ultrasonic-assisted micro-electro-discharge machining(EDM)has the potential to enhance processing responses such as material removal rate(MRR)and surface *** understand the reasons for this enhancement,the physical mechanisms responsible for the individual discharges and the craters that they form need to be *** work examines features of craters formed by single discharges at various parameter values in both conventional and ultrasonic-assistedEDM of ***-speed imaging of the plasma channel is performed,and data on the individual discharges are captured in real-time.A 2D axisymmetric model using finite element software is established to model crater *** the basis of simulation and experimental results,a comparative study is then carried out to examine the effects of ultrasonic vibrational assistance on crater *** every set ofEDM parameters,the crater diameter and depth from a single discharge are found to be higher in ultrasonic-assistedEDM than in conventional*** improved crater geometry and the reduced bulge formation at the crater edges are attributed to the increased melt pool velocity and temperature predicted by the model.

关键词： Ultrasonic vibration Discharge crater Plasma diameter Single discharge

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：