检索结果-南通市图书馆

Interplay between temperature-dependent strengthening mechanisms and mechanical stability in high-performance austenitic stainless steels

引用

International Journal of Minerals,Metallurgy and materials 2024年第10期31卷 2182-2188页

作者： Mohammad Javad Sohrabi Hamed Mirzadeh Saeed Sadeghpour Milad Zolfipour Aghdam Abdol Reza Geranmayeh Reza Mahmudi School of Metallurgy and materials engineering College of EngineeringUniversity of Tehran14395-515 TehranIran centre for advanced Steels Research Materials and Mechanical EngineeringUniversity of Oulu90014 OuluFinland department of mechanical engineering College of EngineeringUniversity of Tehran14395-515 TehranIran

The effects of deformation temperature on the transformation-induced plasticity(TRIP)-aided 304L,twinning-induced plasti-city(TWIP)-assisted 316L,and highly alloyed stable 904L austenitic stainless steels were compared for the first time to tune the mechan-ical properties,strengthening mechanisms,and strength-ductility *** this purpose,the scanning electron microscopy(SEM),electron backscattered diffraction(EBSD),X-ray diffraction(XRD),tensile testing,work-hardening analysis,and thermodynamics calcu-lations were *** induced plasticity effects led to a high temperature-dependency of work-hardening behavior in the 304L and 316L stainless *** the deformation temperature increased,the metastable 304L stainless steel showed the sequence of TRIP,TWIP,and weakening of the induced plasticity mechanism;while the disappearance of the TWIP effect in the 316L stainless steel was also ***,the solid-solution strengthening in the 904L superaustenitic stainless steel maintained the tensile properties over a wide temper-ature range,surpassing the performance of 304L and 316L stainless *** this regard,the dependency of the total elongation on the de-formation temperature was less pronounced for the 904L alloy due to the absence of additional plasticity *** results re-vealed the importance of solid-solution strengthening and the associated high friction stress for superior mechanical behavior over a wide temperature range.

关键词： austenitic stainless steels mechanical behavior stacking fault energy metastability mechanical twinning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Applying the Protective Mn-Co-La_(2)O_(3)Coating on Crofer 22 APU Ferritic Stainless Steel Used as Solid Oxide Fuel Cell Interconnects

引用

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 872-888页

作者： Farhad Mohsenifar Hadi Ebrahimifar Ahmad Irannejad department of materials engineering and Metallurgy Faculty of EngineeringShahid Bahonar University of KermanKermanIran mechanical engineering department Faculty of EngineeringHigher Education Complex of Bam76615-314BamIran department of materials engineering Faculty of Mechanical and Materials EngineeringGraduate University of Advanced TechnologyKerman ***Iran

This research studies the effect of Mn-Co-La_(2)O_(3) coating synthesized by the electrodeposition method on the oxidation resistance and electrical conductivity of the Crofer 22 APU stainless steel interconnect plates in solid oxide fuel *** test samples were characterized by a field emission scanning electron microscope(FESEM)equipped with energy dispersive spectroscopy(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The oxidation kinetics of the coated and uncoated samples were studied by tracking their weight changes over time at 800°C,showing that the oxidation mechanism for all samples follows the parabolic *** oxidation rate constant(k_(p))values of the coated sample compared with that of the uncoated one indicated a reduction in the oxidation rate of the steel substrate in the presence of the Mn-Co-La_(2)O_(3) *** examination of the cross-section of different samples after the isothermal oxidation for 500 h at 800°C exhibited that applying the composite coating leads to a decrease in the thickness of the chromia layer formed on the steel ***,under these conditions,the area-specific resistance(ASR)of the coated sample(13.11 mΩcm^(2))is significantly lower than that of the uncoated one(41.45 mΩcm^(2)).

关键词： Area specific resistance Oxidation Fuel cell composite coating

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-strength and thermally stable TiB_(2)-modified Al-Mn-Mg-Er-Zr alloy fabricated via selective laser melting

引用

International Journal of Minerals,Metallurgy and materials 2024年第10期31卷 2221-2232页

作者： Jiang Yu Yaoxiang Geng Yongkang Chen Xiao Wang Zhijie Zhang Hao Tang Junhua Xu Hongbo Ju Dongpeng Wang School of materials Science and engineering Jiangsu University of Science and TechnologyZhenjiang 212003China Beijing advanced Innovation Center for materials Genome engineering Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National engineering Research Center of Near-Net Shape Forming for Metallic materials Guangdong Provincial Key Laboratory for Processing and Forming of Advanced Metallic MaterialsSouth China University of TechnologyGuangzhou 510640China CEMMPRE-centre for mechanical engineering materials and Processes Department of Mechanical EngineeringUniversity of CoimbraRua Luís Reis SantosCoimbra 3030-788Portugal

To increase the processability and plasticity of the selective laser melting(SLM)fabricated Al-Mn-Mg-Er-Zr alloys,a novel TiB_(2)-modified Al-Mn-Mg-Er-Zr alloy with a mixture of Al-Mn-Mg-Er-Zr and nano-TiB_(2) powders was fabricated by *** pro-cessability,microstructure,and mechanical properties of the alloy were systematically investigated by density measurement,microstruc-ture characterization,and mechanical properties *** alloys fabricated at 250 W displayed higher relative densities due to a uni-formly smooth top surface and appropriate laser energy *** maximum relative density value of the alloy reached(99.7±0.1)%,demonstrating good *** alloy exhibited a duplex grain microstructure consisting of columnar regions primarily and equiaxed regions with TiB_(2),Al6Mn,and Al3Er phases distributed along the grain *** directly aging treatment at a high tem-perature of 400℃,the strength of the SLM-fabricated TiB_(2)/Al-Mn-Mg-Er-Zr alloy increased due to the precipitation of the secondary Al6Mn *** maximum yield strength and ultimate tensile strength of the aging alloy were measured to be(374±1)and(512±13)MPa,*** SLM-fabricated TiB_(2)/Al-Mn-Mg-Er-Zr alloy demonstrates exceptional strength and thermal stability due to the synergistic effects of the inhibition of grain growth,the incorporation of TiB_(2) nanoparticles,and the precipitation of secondary Al6Mn nanoparticles.

关键词： selective laser melting aluminum alloy processability mechanical properties thermal stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nickel Sulfide Modified NiCu Nanoalloy with Excellent Oxygen Evolution Reaction Properties Prepared through Electrospinning and Heat Treatment

引用

Journal of Wuhan University of Technology(materials Science) 2024年第2期39卷 320-326页

作者：李涛凌帅 ZHONG Shujie LOU Qiongyue department of materials engineering School of Mechanical EngineeringChengdu UniversityChengdu 610106China

Ni^(2+)/Cu^(2+)/SO_(4)^(2-)/polyvinyl alcohol precursor fibers with uniform diameters were prepared through ***-based composite nanoalloys containing Ni,Cu,and S were prepared through heat treatment in an Ar *** experimental results show that the main components of the prepared nanoalloys are NiCu,Ni_(3)S_(2),Ni,and *** nanoalloys exhibit fine grain sizes about 200-500 nm,which can increase with increasing heat treatment *** test results show that the nickel sulfidemodified NiCu nanoalloy composites exhibit excellent oxygen evolution reaction properties,and the oxygen evolution reaction properties gradually improve with the increasing heat treatment *** sample prepared at 1 000℃ for 40 min show a low overpotential of 423 mV and a small Tafel slope of 134 mV·dec^(-1) at a current density of 10 mA·cm^(-2).

关键词： NiCu nanoalloy Ni_(3)S_(2) structure transformation oxygen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Armoring lithium metal anode with soft±rigid gradient interphase toward high-capacity and long-life all-solid-state battery

引用

Green Energy & Environment 2024年第8期9卷 1279-1289页

作者： Rui Zhang Biao Chen Yuhan Ma Yue Li Junwei Sha Liying Ma Chunsheng Shi Naiqin Zhao School of materials Science and engineering and Tianjin Key Laboratory of composite and Functional materials Tianjin University Joint School of National University of Singapore and Tianjin University International Campus of Tianjin University department of Chemical and Biomolecular engineering National University of Singapore Collaborative Innovation centre of Chemical Science and engineering

Solid polymer electrolytes （SPEs） are highly promising for realizing high-capacity,low-cost,and safe Li metal ***,the Li dendritic growth and side reactions between Li and SPEs also plague these ***,a fluorinated lithium salt coating （FC） with organicinorganic gradient and soft-rigid feature is introduced on Li surface as an artificial protective layer by the in-situ reaction between Li metal and fluorinated carboxylic *** FC layer can improve the interface stability and wettability between Li and SPEs,assist the transport of Li ions,and guide Li nucleation,contributing to a dendrite-free Li deposition and long-lifespan Li metal *** symmetric cell with FC-Li anodes exhibits a high areal capacity of 1 mAh cm-2at 0.5 mA cm-2,and an ultra-long lifespan of 2000 h at a current density of 0.1 m A ***,the full cell paired with the LiFePO4cathode exhibits improved cycling stability,remaining 83.7%capacity after 500 cycles at 1 *** matching with the S cathode,the FC layer can prevent the shuttle effect,contributing to stable and high-capacity Li-S *** work provided a promising way for the construction of stable all-solid-state lithium metal batteries with prolonged lifespan.

关键词： All-solid-state battery Solid polymer electrolyte Li metal anode Li nucleation Interface stability

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acoustical properties of a 3D printed honeycomb structure filled with nanofillers:Experimental analysis and optimization for emerging applications

引用

Defence Technology（防务技术） 2024年第5期35卷 248-258页

作者： Jeyanthi Subramanian Vinoth kumar Selvaraj Rohan Singh Ilangovan S Naresh Kakur Ruban Whenish School of mechanical engineering Vellore Institute of TechnologyChennai600127Tamil NaduIndia department of mechanical engineering SRM Institute of Science and TechnologyRamapuramChennai600089India department of Chemical engineering and materials Science University of Southern CaliforniaLos Angeles90089USA advanced materials Research centre Technology Innovation InstituteAbu Dhabi9639UAE Center for Biomaterials Cellular and Molecular TheranosticsVellore Institute of TechnologyVellore632014Tamil NaduIndia

The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E *** Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their *** organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)*** structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel ***,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.

关键词： 3D printing Honeycomb structure Acoustics Field emission scanning electron microscope Response surface methodology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Distinct Electrical and mechanical Responses of a Cu-10Fe composite Prepared by Hot-Pressed Sintering and Post Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： X.Y.Yue S.Y.Peng X.Zhang C.N.He Y.Z.Tian Key Laboratory for Anisotropy and Texture of materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of materials Science and engineering and Tianjin Key Laboratory of composite and Functional materials Tianjin UniversityTianjin300350China Research centre for Metallic Wires Northeastern UniversityShenyang110819China

A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe *** Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.

关键词： Cu-Fe composite Hot-pressed sintering Thermal stability Strength Electrical conductivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Two-stage aging treatment to accelerate aging kinetics without impairing strength in B_4C/7A04Al composite

引用

Science China(Technological Sciences) 2024年第8期67卷 2485-2492页

作者： CHEN YunTao MA GuoNan ZHU ShiZe WANG Dong XIAO BoLv MA ZongYi Shi-Changxu Innovation Center for advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of materials Science and engineering University of Science and Technology of ChinaShenyang 110016China centre of Excellence for advanced materials Dongguan 523808China

Aging treatments are the key process to obtain satisfactory strength for 7xxxAl alloys and their composites. However, traditional single-stage(SS) aging is time-consuming to reach a peak strength condition. In this study, an efficient 120℃ + 160℃ two-stage(TS) aging treatment was proposed on a B_4C/7A04Al composite fabricated via powder metallurgy(PM) technology, which could acquire similar peak-aging strength but only took about 15% of the time compared to traditional 120℃ SS aging. The evolution of precipitation during the TS aging was investigated, as well as those of the 7A04Al alloys for comparison. In the second stage aging process, the higher aging temperature accelerated the nucleation of η′ phases inside the grains and thus increased the density of precipitates. Moreover, the short aging time limited the coarsening of precipitates and the broadening of precipitatefree zones. The above factors were beneficial for quickly obtaining satisfactory precipitation strengthening effects. The B_4C/7A04Al composite exhibited slower aging kinetics than the 7A04Al alloy in the TS aging. Mg elements consumption by the chemical reaction between B impurities introduced by B_4C particles and the Al matrix was considered to potentially retard the aging kinetics of the B_4C/7A04Al composite. Nevertheless, the precipitation sequence was not affected.

关键词： aluminum matrix composites aging treatment powder metallurgy mechanical properties precipitation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High strength mullite-bond SiC porous ceramics fabricated by digital light processing

引用

Journal of advanced Ceramics 2024年第1期13卷 53-62页

作者： Jian Sun Jingde Zhang Xu Zhang Zihe Li Jianzhang Li Sijie Wei Weibin Zhang Weili Wang Guifang Han Key Laboratory for Liquid-Solid Structural Evolution and Processing of materials(Ministry of Education) School of Materials Science and EngineeringShandong UniversityJinan 250061China Key Laboratory of Special Functional Aggregated materials Ministry of EducationShandong UniversityJinan 250100China materials and Structures Research centre Department of Mechanical EngineeringUniversity of BathBath BA27AYUK National engineering Research centre of Ceramic Matrix composite Manufacture Technology Xi’an Golden Mountain Ceramic Composites Co.Ltd.Xi’an 710118China School of Physics and materials Science Changji UniversityChangji 831100China

Fabricating SiC ceramics via the digital light processing(DLP)technology is of great challenge due to strong light absorption and high refractive index of deep-colored SiC powders,which highly differ from those of resin,and thus significantly affect the curing performance of the photosensitive SiC *** this paper,a thin silicon oxide(SiO_(2))layer was in-situ formed on the surface of SiC powders by pre-oxidation *** method was proven to effectively improve the curing ability of SiC *** SiC photosensitive slurry was fabricated with solid content of 55 vol%and viscosity of 7.77 Pa·s(shear rate of 30 s^(−1)).The curing thickness was 50μm with exposure time of only 5 ***,a well-designed sintering additive was added to completely convert low-strength SiO_(2) into mullite reinforcement during *** mullite-bond SiC ceramics were successfully *** flexural strength of SiC ceramics sintered at 1550℃in air reached 97.6 MPa with porosity of 39.2 vol%,as high as those prepared by spark plasma sintering(SPS)techniques.

关键词： digital light processing(DLP) SiC ceramics pre-oxidation mullite-bond SiC mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of friction stir processing and nano-hydroxyapatite on the microstructure,hardness,degradation rate and in-vitro bioactivity of WE43 alloy for biomedical applications

引用

Journal of Magnesium and Alloys 2024年第1期12卷 209-224页

作者： Bo Wu Farazila Yusof Fuguo Li Huan Miao A.R.Bushroa Mohd Ridha Bin Muhamad Irfan Anjum Badruddin Mahmoud Z.Ibrahim department of mechanical engineering Faculty of EngineeringUniversiti MalayaKuala Lumpur 50603Malaysia centre of advanced Manufacturing and Material Processing(AMMP centre) Universiti MalayaKuala Lumpur 50603Malaysia Center of Foundation studies in Science Universiti MalayaKuala Lumpur 50603Malaysia State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China mechanical engineering department College of EngineeringKing Khalid UniversityAbha 61421Saudi Arabia Design and Production engineering Faculty of EngineeringAin Shams UniversityCairo 11517Egypt

Nowadays,magnesium alloys are emerging in biomedical implants for their similar properties to natural ***,the rapid degradation of magnesium alloys in biological media hinders successful *** of microstructure,as well as reinforcement particles can significantly improve the degradation *** this work,multi-pass friction stir processing(FSP)was proposed to synthesize WE43/nano-hydroxyapatite(n HA)surface composite,the microstructure,reinforced particle distribution,micro-hardness,corrosion behavior and in-vitro bioactivity were *** subsequent FSP passes of WE43 alloy and WE43/n HA composite refined the grain size which was reduced by 94.29%and 95.92%(2.63 and 1.88μm,respectively)compared to base metal after three *** resulted in increasing the microhardness by 120%(90.86 HV0.1)and 135%(105.59 HV0.1)for the WE43 and WE43-n HA,*** is found that increasing FSP passes improved the uniform distribution of n HA particles within the composite matrix which led to improved corrosion resistance and less degradation *** corrosion rate of the FSPed WE43/n HA composite after three passes was reduced by 38.2%(4.13 mm/year)and the degradation rate was reduced by 69.7%(2.87 mm/y).This is attributed to secondary phase(Mg24Y5and Mg41Nd5)particle fragmentation and redistribution,as well as a homogeneous distribution of n ***,the growing Ca-P and Mg(OH)2layer formed on the surface represented a protective layer that reduced the degradation *** wettability test revealed a relatively hydrophilic surface with water contact angle of 49.1±2.2°compared to 71.2±2.1°for base ***,biomineralization test showed that apatite layer grew after immersion 7d in simulated body fluid with atomic ratio of Ca/P 1.60 approaching the stoichiometric ratio(1.67)indicating superior bioactivity of FSPed WE43/n HA composite after three *** results raise that the grain refinement by FSP and introduction of n HA partic

关键词： Friction stir processing Magnesium-based composite Nano-hydroxyapatite Corrosion behavior In-vitro bioactivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：