检索结果-南通市图书馆

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： M.NEMATI M.SEFID A.KARIMIPOUR A.J.CHAMKHA faculty of mechanical engineering Yazd UniversityYazd ***Iran department of mechanical engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran faculty of engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(MF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBM)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed MF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and MF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

Applying the Protective Mn-Co-La_(2)O_(3)Coating on Crofer 22 APU Ferritic Stainless Steel Used as Solid Oxide Fuel Cell Interconnects

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 872-888页

作者： Farhad Mohsenifar Hadi Ebrahimifar Ahmad Irannejad department of Materials engineering and Metallurgy Faculty of EngineeringShahid Bahonar University of KermanKermanIran mechanical engineering department Faculty of EngineeringHigher Education Complex of Bam76615-314BamIran department of Materials engineering Faculty of Mechanical and Materials EngineeringGraduate University of Advanced TechnologyKerman ***Iran

This research studies the effect of Mn-Co-La_(2)O_(3) coating synthesized by the electrodeposition method on the oxidation resistance and electrical conductivity of the Crofer 22 APU stainless steel interconnect plates in solid oxide fuel *** test samples were characterized by a field emission scanning electron microscope(FESEM)equipped with energy dispersive spectroscopy(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The oxidation kinetics of the coated and uncoated samples were studied by tracking their weight changes over time at 800°C,showing that the oxidation mechanism for all samples follows the parabolic *** oxidation rate constant(k_(p))values of the coated sample compared with that of the uncoated one indicated a reduction in the oxidation rate of the steel substrate in the presence of the Mn-Co-La_(2)O_(3) *** examination of the cross-section of different samples after the isothermal oxidation for 500 h at 800°C exhibited that applying the composite coating leads to a decrease in the thickness of the chromia layer formed on the steel ***,under these conditions,the area-specific resistance(ASR)of the coated sample(13.11 mΩcm^(2))is significantly lower than that of the uncoated one(41.45 mΩcm^(2)).

关键词： Area specific resistance Oxidation Fuel cell Composite coating

Dynamics of a rotating ring-stiffened sandwich conical shell with an auxetic honeycomb core

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 963-982页

作者： S.JAHANGIRI A.GHORBANPOUR ARANI Z.KHODDAMI MARAGHI department of Solid Mechanics Faculty of Mechanical EngineeringUniversity of KashanKashan ***Iran faculty of engineering Mahallat Institute of Higher EducationMahallat ***Iran

The free vibration analysis of a rotating sandwich conical shell with a reentrant auxetic honeycomb core and homogenous isotropic face layers reinforced with a ring support is *** shell is modeled utilizing the first-order shear deformation theory(FSDT)incorporating the relative,centripetal,and Coriolis accelerations alongside the initial hoop tension created by the *** governing equations,compatibility conditions,and boundary conditions are attained using Hamilton’s *** trigonometric functions,an analytical solution is derived in the circumferential direction,and a numerical one is presented in the meridional direction via the differential quadrature method(DQM).The effects of various factors on the critical rotational speeds and forward and backward frequencies of the shell are *** present work is the first theoretical work regarding the dynamic analysis of a rotating sandwich conical shell with an auxetic honeycomb core strengthened with a ring support.

关键词： free vibration conical shell rotating shell ring support auxetic honeycomb

Chaotic Aquila Optimization Algorithm for Solving Phase Equilibrium Problems and Parameter Estimation of Semi-empirical Models

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic engineering 2024年第1期21卷 486-526页

作者： Oguz Emrah Turgut Mert Sinan Turgut Erhan Kırtepe department of Industrial engineering Faculty of Engineering and ArchitectureIzmir Bakircay UniversityMenemenizmirTurkey department of mechanical engineering Faculty of EngineeringEge UniversityBornovaizmirTurkey department of Motor Vehicles and Transportation Technologies Sirnak UniversitySirnakTurkey

This research study aims to enhance the optimization performance of a newly emerged Aquila Optimization algorithm by incorporating chaotic sequences rather than using uniformly generated Gaussian random *** work employs 25 different chaotic maps under the framework of Aquila *** considers the ten best chaotic variants for performance evaluation on multidimensional test functions composed of unimodal and multimodal problems,which have yet to be studied in past literature *** was found that Ikeda chaotic map enhanced Aquila Optimization algorithm yields the best predictions and becomes the leading method in most of the *** test the effectivity of this chaotic variant on real-world optimization problems,it is employed on two constrained engineering design problems,and its effectiveness has been ***,phase equilibrium and semi-empirical parameter estimation problems have been solved by the proposed method,and respective solutions have been compared with those obtained from state-of-art *** is observed that CH01 can successfully cope with the restrictive nonlinearities and nonconvexities of parameter estimation and phase equilibrium problems,showing the capabilities of yielding minimum prediction error values of no more than 0.05 compared to the remaining algorithms utilized in the performance benchmarking process.

关键词： Aquila optimization algorithm Chaotic maps Parameter estimation Phase equilibrium Unconstrained optimization

Synthesis and Thermal Characterization of Solar Salt-Based Phase Change Composites with Graphene Nanoplatelets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 491-500页

作者： Pethurajan VIGNESHWARAN Saboor SHAIK Sivan SURESH Müslüm ARICI Asif AFZAL department of Thermal and Energy engineering School of Mechanical Engineering(SMEC)Vellore Institute of TechnologyVelloreTamil NaduIndia Nanotechnology Research Laboratory Department of Mechanical EngineeringNational Institute of TechnologyTiruchirappalliTamil NaduIndia mechanical engineering department Engineering FacultyKocaeli UniversityUmuttepe CampusKocaeli41001Turkey department of mechanical engineering P.A.College of Engineering(affiliated to Visvesvaraya Technological UniversityBelagavi)Mangaluru574153India

Thermal energy storage(TES) systems use solar energy despite its irregular availability and day-night temperature *** work reports the thermal characterizations of solar salt-based phase change composites in the presence of graphene nanoplatelets(GNP).Solar salt(60:40 of NaNO_(3):KNO_(3)) possessing phase transition temperature and melting enthalpy of 221.01℃ and 134.58 kJ/kg is proposed as a phase change material(PCM) for high-temperature solar-based energy storage *** conductivity must be improved to make them suitable for widespread applications and to close the gap between the system needs where they are *** is added at weight concentrations of 0.1%,0.3%,and 0.5% with solar salt using the ball milling method to boost its thermal *** studies indicated the formation of a uniform surface of GNP on solar *** spectrum peaks identified the physical interaction between salt and *** characterization of the composites,such as thermal conductivity,DSC and TGA was carried out for the samples earlier and later 300 thermal cycles.0.5% of GNP has improved the thermal conductivity of salt by 129.67% and after thermal cycling,the enhancement reduced to 125.21% indicating that thermal cycling has a minor impact on thermal *** change temperature decreased by around 2.32% in the presence of0.5% GNP and the latent heat reduced by 4.34% after thermal *** thermograms depicted the composites initiated the weight loss at around 550℃ after which it was *** thermal cycling,the weight loss initiated at ~40℃ lower compared to pure salt,which was found to be a minor *** characterization of solar salt and GNP-based solar salt composites revealed that the composites can be used for enhanced heat transfer in high-temperature solar-based heat transfer and energy storage applications.

关键词： thermal energy storage high temperature solar salt graphene nanoplatelets thermal characterization

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： Gürel Cama Ali Günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200˙Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

Determination of Material Parameters of EVA Foam under Uniaxial Compressive Testing Using Hyperelastic Models

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第3期39卷 800-804页

作者： Nattapong Sangkapong Fasai Wiwatwongwana Nattawit Promma department of mechanical engineering Faculty of EngineeringChiang Mai UniversityChiang Mai 50300Thailand department of Advanced Manufacturing Technology Faculty of EngineeringPathumwan Institute of TechnologyBangkok 10330Thailand

The objective of this research was to determine the mechanical parameter from EVA foam and also investigate its behavior by using Blatz-Ko,Neo-Hookean,Mooney model and experimental *** physical characteristic of EVA foam was also evaluated by scanning electron microscopy(SEM).The results show that Blatz-Ko and Neo-Hookean model can fit the curve at 5%and 8%strain,*** Mooney model can fit the curve at 50%*** modulus of rigidity evaluated from Mooney model is 0.0814±0.0027 *** structure of EVA foam from SEM image shows that EVA structure is a closed cell with homogeneous porous *** the result,it is found that Mooney model can adjust the data better than other *** model can be applied for mechanical response prediction of EVA foam and also for reference value in engineering application.

关键词： hyperelastic models modulus of rigidity EVA foam curve fitting method strain energy function uniaxial compressive testing

Compression properties of cost-efficient porous expanded clay reinforced AA7075 syntactic foams fabricated by industrial-oriented die casting technology

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 60-70页

作者： İsmail Cem Akgün Çağın Bolat Ali Gökşenli faculty of mechanical engineering Istanbul Technical University34437İstanbulTurkey faculty of engineering Samsun University55420SamsunTurkey

In today’s manufacturing industries,hard competition between rival firms makes it compulsory for researchers to design lighter and cheaper machine components due to the megatrends of cost-effectiveness and *** this point,aluminum syntactic foams(ASFs)are new-generation engineering composites and come into the upfront as a *** to their features like low density,sufficient elongation,and perfect energy absorption ability,these advanced foams have been considerably seductive for many industrial sectors *** this study,an industrial-oriented automatic die casting technology was used for the first time to manufacture the combination of AA7075/porous expanded clay(PEC).Micro evaluations(optical and FESEM)reveal that there is a homogenous particle distribution in the foam samples,and inspections are compatible with the other ASF ***,T6 aging heat treatment was operated on one half of the produced foams to explore the probable impact of aging on the compressive *** results show that PEC particles can be an alternative to expensive hollow spheres used in the previous ***,a favorable relationship is ascertained between the aging treatment and mechanical properties such as compression strength and plateau strength.

关键词： die casting porous materials metal matrix sytanctic foams expanded clay compressive deformation

Nonlinear phenomena in vibrations of embedded carbon nanotubes conveying viscous fluid

在线全文

学校读者我要写书评

暂无评论

Nanotechnology and Precision engineering 2024年第1期7卷 44-54页

作者： Reza Ebrahimi mechanical engineering Faculty of EngineeringYasouj UniversityYasouj 75918-74831Iran

Various nonlinear phenomena such as bifurcations and chaos in the responses of carbon nanotubes(CNTs)are recognized as being major contributors to the inaccuracy and instability of nanoscale mechanical ***,the main purpose of this paper is to predict the nonlinear dynamic behavior of a CNT conveying viscousﬂuid and supported on a nonlinear elastic *** proposed model is based on nonlocal Euler–Bernoulli beam *** Galerkin method and perturbation analysis are used to discretize the partial differential equation of motion and obtain the frequency-response equation,respectively.A detailed parametric study is reported into how the nonlocal parameter,foundation coefﬁcients,ﬂuid viscosity,and amplitude and frequency of the external force inﬂuence the nonlinear dynamics of the ***,quasi-periodic,and chaotic behaviors and hardening nonlinearity are revealed by means of the vibration time histories,frequency-response curves,bifurcation diagrams,phase portraits,power spectra,and Poincaré***,the results show that it is possible to eliminate irregular motion in the whole range of external force amplitude by selecting appropriate parameters.

关键词： Nonlinear vibration Carbon nanotubes Nonlocal effect Viscousﬂuid Nonlinear elastic medium