检索结果-南通市图书馆

Research progress in friction stir processing of magnesium alloys and their metal matrix surface composites: Evolution in the 21^(st )century

引用

Journal of Magnesium and Alloys 2024年第6期12卷 2091-2146页

作者： Roshan Vijay Marode Tamiru Alemu Lemma Nabihah Sallih Srinivasa Rao Pedapati Mokhtar Awang Adeel Hassan department of mechanical engineering Universiti Teknologi PETRONASBandarSeri IskandarPerak 32610Malaysia department of mechanical engineering College of EngineeringThe University of Texas Permian BasinMidland-OdessaUnited States mechanical engineering department Universiti Teknologi BruneiBrunei

Rising concerns about climate change drive the demand for lightweight ***(Mg)alloys are highly valued for their low weight,making them increasingly important in various *** focusing on enhancing the characteristics of Mg alloys and developing their Metal Matrix Composites(MMCs)have gained significant attention worldwide over the past decade,driven by the global shift towards lightweight *** Stir Processing(FSP)has emerged as a promising technique to enhance the properties of Mg alloys and produce ***,FSP adapted to refine grain size from the micro to the nano level and accelerated the development of MMCs due to its solid-state nature and the synergistic effects of microstructure refinement and reinforcement,improving strength,hardness,ductility,wear resistance,corrosion resistance,and fatigue ***,producing defect-free and sound FSPed Mg and Mg-MMCs requires addressing several variables and their interdependencies,which opens up a broad range of practical *** existing reviews on individual FSP of Mg,its alloys,and MMCs,an attempt has been made to analyze the latest research on these three aspects collectively to enhance the understanding,application,and effectiveness of FSP for Mg and its *** review article discusses the literature,classifies the importance of Mg alloys,provides a historical background,and explores developments and potential applications of FSPed Mg *** focuses on novel fabrication methods,reinforcement strategies,machine and tool design parameters,material characterization,and integration with other methods for enhanced *** influence of process parameters and the emergence of defects are examined,along with specific applications in mono and hybrid composites and their microstructure *** study identifies promising reinforcement materials and highlights research gaps in FSP for Mg alloys and MMCs *** conclude

关键词： Magnesium alloys Friction stir processing Metal matrix composites Lightweight Surface modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Material characterization and inter/intra-particle validation for DEM simulation of urea coating process

引用

Particuology 2024年第5期88卷 32-48页

作者： Salma A.Nouh KuZilati KuShaari Lau Kok Keong Shafirah Samsuri Chemical engineering department Universiti Teknologi PETRONAS32610 Seri IskandarPerak Darul RidzuanMalaysia

Particle coating is a common operation in the controlled-release fertilizer (CRF) industry,where a coating layer is appliedto the urea cores.A discrete element method (DEM) computer simulation was applied to model the coating process for the urea granules using measured model *** accuracy of DEM input parameters for the coating material properties and the physical and mechanical characterizations of urea granules are crucial to the study of particle coating ***,to enhance the simulation accuracy,information on the material properties (urea granules) is *** this study,the elasticity parameters,shear modulus ,coefficient of restitution (CoR),and coefficient of rolling and static friction (CoRF) and (CoSF) of urea granules are estimated experimentally in addition to the physical *** sensitivity of the angle of repose of the urea bed was investigated at different coefficients of *** to the obtained experimental value of the angle of repose,values of 0.2 and 0.3 for CoRF and CoSF,respectively,were adjusted to obtain consistent urea granules’ motion for simulation and the ***,the spray droplet sizes and velocity distributions were estimated using the video-imaging process *** on this experimental characterization,elasticity parameters and spray properties were integrated into DEM simulation software as input data to perform numerical analysis of the coating process to compare simulation and experimental results,which show uniformity at three different pan speeds with a maximum deviation of 0.033 at 5 ***,consistency between DEM and experiment results was achieved in terms of average coating thickness (μm) of the selected samples and average intra-particle thickness variation ( CoV intra ).These results revealed that the coating film thickness is proportional to the rotation speed for the experiment and *** enhance the inter-particle coating uniformity,the effects of the

关键词： Contact model Discrete element method Urea fertilizer Coating process

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A gated recurrent unit model to predict Poisson’s ratio using deep learning

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第1期16卷 123-135页

作者： Fahd Saeed Alakbari Mysara Eissa Mohyaldinn Mohammed Abdalla Ayoub Ibnelwaleed A.Hussein Ali Samer Muhsan Syahrir Ridha Abdullah Abduljabbar Salih Petroleum engineering department Universiti Teknologi PETRONAS32610Bandar Seri IskandarPerakMalaysia Institute of Hydrocarbon Recovery Universiti Teknologi PETRONAS32610Bandar Seri IskandarPerakMalaysia Gas Processing Center College of EngineeringQatar UniversityP.O.Box 2713DohaQatar department of Chemical engineering College of EngineeringQatar UniversityP.O.Box 2713DohaQatar mechanical engineering department Universiti Teknologi PETRONAS32610Bandar Seri IskandarPerakMalaysia

Static Poisson’s ratio(vs)is crucial for determining geomechanical properties in petroleum applications,namely sand *** models have been used to predict vs;however,the published models were limited to specific data ranges with an average absolute percentage relative error(AAPRE)of more than 10%.The published gated recurrent unit(GRU)models do not consider trend analysis to show physical *** this study,we aim to develop a GRU model using trend analysis and three inputs for predicting n s based on a broad range of data,n s(value of 0.1627-0.4492),bulk formation density(RHOB)(0.315-2.994 g/mL),compressional time(DTc)(44.43-186.9 μs/ft),and shear time(DTs)(72.9-341.2μ s/ft).The GRU model was evaluated using different approaches,including statistical error *** GRU model showed the proper trends,and the model data ranges were wider than previous *** GRU model has the largest correlation coefficient(R)of 0.967 and the lowest AAPRE,average percent relative error(APRE),root mean square error(RMSE),and standard deviation(SD)of 3.228%,1.054%,4.389,and 0.013,respectively,compared to other *** GRU model has a high accuracy for the different datasets:training,validation,testing,and the whole datasets with R and AAPRE values were 0.981 and 2.601%,0.966 and 3.274%,0.967 and 3.228%,and 0.977 and 2.861%,*** group error analyses of all inputs show that the GRU model has less than 5% AAPRE for all input ranges,which is superior to other models that have different AAPRE values of more than 10% at various ranges of inputs.

关键词： Static Poisson’s ratio Deep learning Gated recurrent unit(GRU) Sand control Trend analysis Geomechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of synthesis parameters on the performance of crosslinked Co-polymers with clays for conformance control

引用

Petroleum Research 2024年第1期9卷 98-108页

作者： A.A.Roslan N.A.A.Aziz N.F.A.Deraman I.Dzulkarnain Petroleum engineering department Centre of Research Enhanced Oil Recovery(COREOR)Universiti Teknologi PETRONASSeri IskandarPerakMalaysia Chemical engineering department Centre of Research Enhanced Oil Recovery(COREOR)Universiti Teknologi PETRONASSeri IskandarPerakMalaysia

Conformance control or water shut-off is a technique used to improve oil *** conformance control,polymers block high permeability water areas and redistribute water drive toward unswept oil *** this study,co-polymers(denoted ATP-PGV/AM-co-AMPS)were synthesized using acrylamide(AM)and 2-acrylamide-2-methylpropane sulfonic acid(AMPS)as the monomers,polyethylene glycol(PEG)-200 and methylenebisacrylamide(MBA)as the crosslinkers,attapulgite(ATP)and bentonite(PGV)as the clay types,and ammonium persulfate(APS)as the initiator,in addition to paraffin oil and *** were synthesized using inverse emulsion polymerization with different concentrations of monomers,crosslinkers,and clays,and they were characterized using Fourier-transform infrared(FTIR)spectroscopy and scanning electron microscopy(SEM)with energy dispersive X-ray spectroscopy(EDX).FTIR spectra of the samples confirmed the existence of sulfonate and hydroxyl groups,which are important for polymer ***-EDX images indicated that the morphology and elemental composition were different before and after swelling,confirming the occurrence of ***,samples were placed in sodium chloride solution(20,000 ppm)for 7 days to evaluate swelling at both room temperature and 90°*** analysis(TGA)and differential scanning calorimetry(DSC)were used to determine the thermal characteristics of the ***,rheological measurements were used to assess the deformation and rheological behavior of the *** results showed that after 1 day,good swelling without loss of mechanical strength was achieved with the composite synthesized using 10%AM,15%AMPS,6%PGV,and 10%ATP.

关键词： Polymer Clay Water shut-off Conformance Swelling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis of CH_(4) and H_(2) Adsorption on Heterogeneous Shale Surfaces Using aMolecular Dynamics Approach

引用

Fluid Dynamics & Materials Processing 2024年第1期20卷 31-44页

作者： Surajudeen Sikiru Hassan Soleimani Amir Rostami Mohammed Falalu Hamza Lukmon Owolabi Afolabi Centre of Subsurface Imaging(CSI) Universiti Teknologi PETRONASTronohPerakMalaysia department of Geosciences Universiti Teknologi PETRONASBandar Seri IskandarTronohPerakMalaysia department of Pure&Industrial Chemistry Faculty of Physical SciencesBayero University KanoKanoNigeria department of mechanical engineering Engineering Institute of TechnologyMelbourne Campus VictoriaMelbourneAustralia

Determining the adsorption of shale gas on complex surfaces remains a challenge in molecular simulation *** essentially stem from the need to create a realistic shale structure model in terms of mineral heterogeneityand ***,precise characterization of the competitive adsorption of hydrogen andmethane in shale generally requires the experimental determination of the related adsorptive *** thisstudy,the adsorption of adsorbates,methane(CH_(4)),and hydrogen(H_(2))on heterogeneous shale surface modelsof Kaolinite,Orthoclase,Muscovite,Mica,C_(60),and Butane has been simulated in the frame of a moleculardynamic’s numerical *** results show that these behaviors are influenced by pressure and *** increasing the pressure from 500 to 2000 psi,the sorption effect for CH_(4)significantly increasesbut shows a decline at a certain stage(if compared to H_(2)).The research findings also indicate that raw shalehas a higher capacity to adsorb CH_(4)compared to ***,in shale,this difference is negligible.

关键词： Shale gas adsorption methane hydrogen molecular dynamic sorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Voids size distribution in gelled waxy crude oil under dynamic and static cooling

引用

Petroleum Research 2024年第1期9卷 109-114页

作者： Girma T.Chala Shaharin A.Sulaiman department of mechanical engineering(Well engineering) International College of Engineering and ManagementP.O.Box 2511C.P.O Seeb 111MuscatOman department of mechanical engineering Universiti Teknologi PETRONASBandar Seri Iskandar37500TronohPerakMalaysia

Waxy crude oil is known for its high wax contents that can potentially result in gelling following sufficient cooling of the transportation line in the subsea bed at offshore *** gelling over the entire lines requires an accurately predicted restart pressure to restart the clogged and idle ***,the common way of predicting the restart pressure has been reported to result in over-designed and predicted piping *** research findings evidenced the formation of voids which would reduce the restart pressure *** study conducted in this paper is aimed at investigating the voids size distribution in gelled crude oil across and along transportation *** of experiments simulating crude oil transportation during both static and dynamic cooling were *** gelled crude oil below the pour point temperature was then scanned using a Magnetic Resonance Imaging(MRI)system to detect the voids *** resulting voids at each scanning cross-section were quantified,and their distributions were *** was observed that dynamic cooling had minimal impacts on the voids size difference along the pipeline with the difference in voids areas within 10 mm^(2) to be twice and uniform for the entire flow rates ***,voids size in statically cooled waxy crude oil was found to be highly distributed with a maximum of 6 voids size distribution in 10 mm2 *** low-end temperature had the highest size difference while the difference was decreasing with higher end *** study shows that the voids amount in dynamically cooled waxy crude oil could also be estimated with lower numbers of cross-sectional voids ***,the higher cross-sectional voids detection is recommended while estimating voids in statically cooled waxy crude oil.

关键词： Gelled crude oil Voids size distribution Dynamic cooling Static cooling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A multi-mechanistic approach to the oil recovery study of a family of amphiphilic polysaccharides

引用

Petroleum Research 2024年第2期9卷 238-249页

作者： Funsho Afolabi Syed MMahmood Lunech Mario Nur Asyraf Md Akhir Bennett Tackie-Otoo Hamid Sharifigaliuk Center of Research in Enhanced Oil Recovery Universiti Teknologi PETRONASSeri IskandarMalaysia Center for Subsurface Imaging Universiti Teknologi PETRONASSeri IskandarMalaysia Research Institute of Petroleum Industry(RIPI) TehranIran

Chemical enhanced oil recovery(cEOR)remains one of the most potent tertiary recovery ***,it is expensive and rarely environmentally ***-based amphiphilic polymers have been suggested as an alternative to eradicating the challenges of conventional cEOR because of cost-effectiveness,and ***,few in-depth studies exist in the literature to investigate the prospects of these materials.A new family of amphiphilic polysaccharides was synthesized by hydrophobic modification of cellulose sulphate,and the EOR functionalities were *** novel biopolymers exhibited the ability to alter rock wetting *** terms of recovery,one of the variants of the synthesized bio amphiphilic polymer(D-I)was able to reduce residual oil saturation to 12%at harsh conditions of 60,000 ppm salinity at 75℃.Micromodel visual analysis revealed that the performance of the novel materials was due to the combination of mobility control,IFT lowering and emulsification,wettability alteration,and *** a performance commensurate to that of a commercial hydrophobically modified polymer,it can be said that the novel amphiphilic polysaccharides can stand as a viable cEOR agent for oilfield applications.

关键词： Bio-based polymers Amphiphilic polysaccharides EOR Cellulose sulphate Environmental sustainability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Three-Dimensional Sound Source Location Algorithm for Subsea Leakage Using Hydrophone

引用

China Ocean engineering 2024年第2期38卷 326-337页

作者： LI Hao-jie CAI Bao-ping YUAN Xiao-bing KONG Xiang-di LIU Yong-hong Javed Akbar KHAN CHU Zheng-de YANG Chao TANG An-bang College of mechanical and Electronic engineering China University of PetroleumQingdao 266580China Shenzhen Urban Public Safety Technology Institute Shenzhen 518000China Institute of Hydrocarbon Recovery Universiti Teknologi PETRONASBandar Seri IskandarPerak Darul Ridzuan 32610Malaysia

Leakages from subsea oil and gas equipment cause substantial economic losses and damage to marine ecosystem,so it is essential to locate the source of the ***,due to the complexity and variability of the marine environment,the signals collected by hydrophone contain a variety of noises,which makes it challenging to extract useful signals for *** solve this problem,a hydrophone denoising algorithm is proposed based on variational modal decomposition(VMD)with grey wolf ***,the average envelope entropy is used as the fitness function of the grey wolf optimizer to find the optimal solution for the parameters K andα.Afterward,the VMD algorithm decomposes the original signal parameters to obtain the intrinsic mode functions(IMFs).Subsequently,the number of interrelationships between each IMF and the original signal was calculated,the threshold value was set,and the noise signal was removed to calculate the time difference using the valid signal obtained by ***,the arrival time difference is used to locate the origin of the *** localization accuracy of the method in finding leaks is investigated experimentally by constructing a simulated leak test rig,and the effectiveness and feasibility of the method are verified.

关键词： grey wolf optimizer variational modal decomposition mean envelope entropy correlation coefficient time difference of arrival

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparative Analysis for the Development of a Green Building Rating System for Nigeria

引用

Journal of Civil engineering and Architecture 2024年第7期18卷 340-347页

作者： Usman Aminu Umar department of Civil engineering Universiti Teknologi PetronasTronoh 31750PerakMalaysia

The functionality of buildings depends on the climate they are subjected to,this means buildings constructed these days need to be built to perform efficiently within the current and future climate and with the aim of reducing the greenhouse emission induced on the *** order to lower CO_(2) emissions and assist in reinforcing the capability of cities to adapt to climate change whilst enhancing the quality of the built environment,it is vital to improve the environmental performance and energy efficiency in *** study aims to identify and compare existing GBRS(green building rating system)with Nigerian climatic *** criteria weighting was developed from the questionnaire supplying expert *** began with a comparative analysis of *** analysis was conducted to find the similarities and differences between existing rating systems and come up with an appropriate rating system for *** approaches included a fieldwork approach(pilot study,survey);questionnaire;and interviews,both structured and ***,the information generated in this pre-test investigation formed the conversational guide and described the decision to determine the main factors that should be involved in the new assessment system for Nigeria.

关键词： Green building GBRS climate change Nigeria

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Surface Morphology and Thermo-Electrical Energy Analysis of Polyaniline (PANI) Incorporated Cotton Fabric

引用

Energy engineering 2024年第1期121卷 1-12页

作者： Md.Shohan Parvez Md.Mustafizur Rahman Mahendran Samykano Mohammad Yeakub Ali Automotive engineering Research Group Faculty of Mechanical and Automotive Engineering TechnologyUniversiti Malaysia Pahang Al-Sultan AbdullahPekanMalaysia department of Textile engineering Khulna University of Engineering&Technology(KUET)KhulnaBangladesh Centre for Research in Advanced Fluid and Processes(CARIFF) Universiti Malaysia Pahang Al-Sultan AbdullahLebuhraya Tun RazakGambangMalaysia mechanical engineering Programme Area Faculty of EngineeringUniversiti Teknologi BruneiBruneiDarussalam

With the exponential development in wearable electronics,a significant paradigm shift is observed from rigid electronics to flexible wearable ***(PANI)is considered as a dominant material in this sector,as it is endowed with the optical properties of both metal and ***,its widespread application got delineated because of its irregular rigid form,level of conductivity,and precise choice of *** PANI in textile materials can generate promising functionality for wearable *** research work employed a straightforward in-situ chemical oxidative polymerization to synthesize PANI on Cotton fabric surfaces with varying dopant(HCl)***-treatment using NaOH is implemented to improve the conductivity of the fabric surface by increasing the monomer *** research explores the morphological and structural analysis employing SEM,FTIR and *** surface resistivity was measured using a digital multimeter,and thermal stability is measured using *** successful polymerization,a homogenous coating layer is *** is revealed that the simple pre-treatment technique significantly reduces the surface resistivity of Cotton fabric to 1.27 kΩ/cm with increasing acid concentration and thermal *** electro-thermal energy can also reach up to 38.2°C within 50 s with a deployed voltage of 15 *** modified fabric is anticipated to be used in thermal regulation,supercapacitor,sensor,UV shielding,antimicrobial and other prospective functional applications.

关键词： Polyaniline cotton in-situ polymerization SEM TGA heating fabric

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：