检索结果-南通市图书馆

Dual template-induced construction of three-dimensional porous SiO2/NC/Co-CNTs heterostructure with highly dispersed active sites for efficient oxygen evolution reaction

引用

Tungsten 2024年第3期6卷 585-595页

作者： Hai-Qi Zhang Xiao-Jun Zeng Qing-Qing Zhang Zu-Liang Zhang Chu-Long Jin Rong-Hai Yu School of materials Science and engineering Jingdezhen Ceramic University School of materials Science and engineering Beihang University

The development and exploration of efficient and economical electrocatalysts for oxygen evolution reaction（OER） represents the main bottleneck to unlocking a sustainable energy scenario based on elec trocataly tic water *** scale integration of three-dimensional（3D） porous heterostructure with highly dispersed active sites and good structural stability is ***,a dual template route is developed to construct the 3D porous SiO2/nitrogen-doped carbon（NC）/Co-carbon nano tubes（CNTs） hetero ***,the hard template（SiO2nano spheres） contributes to 3D porous structure,increases the specific surface area,and promotes the contact area of the *** the same time,the soft template（basic zinc carbonate） can control the growth of 1D CNTs and facilitate the exposure of the active ***,3D porous SiO2/NC/Co-CNTs hetero structure inherits highly dispersed Co nanoparticles coated by *** conductive channels and abundant N hetero atoms doping are reasonably constructed by a dual template ***,SiO2/NC/Co-CNTs catalyst provides an extraordinary activity for the OER in alkaline media,with a low overpotential of 298 mV at a current density of 10 mA·***,SiO2/NC/Co-CNTs hetero structure enables excellent long-term durability with a 10 mV decay in overpotential after 3000 cyclic voltammetry cycles,and 97% remain in current density over 20 *** is believed that this dual template strategy can provide a new and simple way to construct a highly dispersed active site in electrocatalysts.

关键词： Dual template High dispersion Porous heterostructure Conductive channels Oxygen evolution reaction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Construction of electron rich Fe active sites by FeCu alloy anchoring on carbon nitride for photocatalytic nitrogen reduction

引用

Rare Metals 2024年第4期43卷 1570-1579页

作者： Gang Dong Cong Huang Fei-Yang Chen Xue-Qin Liu Zhen Li Xiao-Li Su Tao Zeng Yun-Xia Chen Yi-Huang Chen Yang Wang School of materials Science and engineering Jingdezhen Ceramic UniversityJingdezhen333403China Faculty of materials Science and Chemistry China University of GeosciencesWuhan430074China College of Chemistry and materials engineering Wenzhou UniversityWenzhou325035China

Given the clean and inexhaustible solar energy from solar light,photocatalytic ammonia synthesis is extremely ***,high electron-hole recombination rates and insufficient active sites severely limited N2 photoreaction ***,we designed and fabricated FeCu alloy nanoparticles anchored on carbon nitride nanosheets with excellent photocatalyt ic ammonia synthesis *** a coupler between Fe and carbon nitride,Cu promotes the separation of photogenerated charge carriers in carbon nitride under solar light irradiation,and renters the semiconductor a forceful electron donor for the Fe active *** accumulated electrons at Fe sites furtherly facilitated the adsorption and activation of the molecular ***,the uniform dispersed FeCu alloy nanoparticles were on carbon nitride nanosheets enhanced the stability of photocataly tic nitrogen reduction reaction,making the artificial photocataly tic ammonia synthesis more sustainable for *** work highlights that a direct electron transfer channel can be used to regulate the photochemical nitrogen fixation network.

关键词： Photocatalytic N_2 fixation Carbon nitride FeCu alloy Active sites Hydrogenation pathway

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Revealing the influence of in-situ formed LiCl on garnet/Li interface for dendrite-free solid-state batteries

引用

Journal of Energy Chemistry 2024年第5期92卷 394-403页

作者： Seoyoon Shin Jinuk Lee Tae Ho Shin Seokhee Lee Hydrogen Energy materials Center Korea Institute of Ceramic Engineering&TechnologyJinju-siGyeongsangnam-do 52851Republic of Korea department of materials Science and engineering Yonsei UniversitySeoul 03722Republic of Korea

Inadequate interfacial contact between lithium and solid-state electrolytes(SSEs)leads to elevated impedance and the growth of lithium dendrites,presenting significant obstacles to the practical viability of solid-state batteries(SSBs).To ameliorate interfacial contact,optimizing the surface treatment of SSEs has been widely ***,the formation of LiCl through acid treatment,an equally crucial factor impacting SSB performance,has received limited attention,leaving its underlying mechanism *** study aims to shed light on SSE characteristics following LiCl formation and the removal of Li_(2)CO_(3) through acid *** seek to establish quantifiable links between SSE surface structure and SSB performance,focusing on interfacial resistance,current distribution,critical current density(CCD),and lithium *** formation of LiCl,occurring as Li_(2)CO_(3) is removed through acid treatment,effectively mitigates lithium dendrite formation on SSE *** action inhibits electron injection and reduces the diffusion rate of Li ***,acid treatment transforms the SSE surface into a lithiophilic state by eliminating surface Li_(2)CO_(3).Consequently,the interfacial resistance between lithium and SSEs substantially decreases from 487.67 to 35.99Ωcm^(2) at 25°*** leads to a notably high CCD of 1.3 mA cm^(-2) and a significantly extended cycle life of 1,000 ***,in full SSBs incorporating LiCoO_(2)cathodes and acid-treated garnet SSEs,we observe exceptional cyclability and rate *** findings highlight that acid treatment not only establishes a fundamental relationship between SSE surfaces and battery performance but also offers an effective strategy for addressing interfacial challenges in SSBs.

关键词： Solid-statebatteries Acidtreatment Interfacial stability LiCl Surface modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High strength mullite-bond SiC porous ceramics fabricated by digital light processing

引用

Journal of Advanced ceramics 2024年第1期13卷 53-62页

作者： Jian Sun Jingde Zhang Xu Zhang Zihe Li Jianzhang Li Sijie Wei Weibin Zhang Weili Wang Guifang Han Key Laboratory for Liquid-Solid Structural Evolution and Processing of materials(Ministry of Education) School of Materials Science and EngineeringShandong UniversityJinan 250061China Key Laboratory of Special Functional Aggregated materials Ministry of EducationShandong UniversityJinan 250100China materials and Structures Research Centre Department of Mechanical EngineeringUniversity of BathBath BA27AYUK National engineering Research Centre of ceramic Matrix Composite Manufacture Technology Xi’an Golden Mountain Ceramic Composites Co.Ltd.Xi’an 710118China School of Physics and materials Science Changji UniversityChangji 831100China

Fabricating SiC ceramics via the digital light processing(DLP)technology is of great challenge due to strong light absorption and high refractive index of deep-colored SiC powders,which highly differ from those of resin,and thus significantly affect the curing performance of the photosensitive SiC *** this paper,a thin silicon oxide(SiO_(2))layer was in-situ formed on the surface of SiC powders by pre-oxidation *** method was proven to effectively improve the curing ability of SiC *** SiC photosensitive slurry was fabricated with solid content of 55 vol%and viscosity of 7.77 Pa·s(shear rate of 30 s^(−1)).The curing thickness was 50μm with exposure time of only 5 ***,a well-designed sintering additive was added to completely convert low-strength SiO_(2) into mullite reinforcement during *** mullite-bond SiC ceramics were successfully *** flexural strength of SiC ceramics sintered at 1550℃in air reached 97.6 MPa with porosity of 39.2 vol%,as high as those prepared by spark plasma sintering(SPS)techniques.

关键词： digital light processing(DLP) SiC ceramics pre-oxidation mullite-bond SiC mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stable operation of highly loaded pure Si-Fe anode under ambient pressure via carboxy silane-directed robust solid electrolyte interphase

引用

Journal of Energy Chemistry 2024年第7期94卷 568-576页

作者： Guntae Lim Dong Guk Kang Hyeon Gyu Lee Yen Hai Thi Tran Kihun An Junghyun Choi Kwang Chul Roh Do Youb Kim Seung-Wan Song department of Chemical engineering&Applied Chemistry Chungnam National University Daejeon 34134Republic of Korea Energy Storage materials Center Korea Institute of Ceramic Engineering&TechnologyJinju 52851Republic of Korea Advanced Energy materials Research Center Korea Research Institute of Chemical TechnologyDaejeon 34114Republic of Korea

Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability ***,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on *** stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only ***-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.

关键词： High-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Direct microwave leaching conditions of rare earth elements in fluorescent wastes

引用

Journal of Rare Earths 2024年第6期42卷 1165-1174,I0007页

作者： A.Bilen B.Birol M.N.Saridede S.S.Kaplan M.S.Sonmez department of Metallurgical and materials engineering Yildiz Technical UniversityIstanbulTurkey department of Chemical engineering and materials Science Stevens Institute of TechnologyNew JereyUSA department of Metallurgical and materials engineering Istanbul Technical UniversityIstanbulTurkey

The luminescent phosphor powder in the fluorescent lamp constitutes 2%of the lamp’s *** can be mentioned that fluorescent wastes are a crucial raw material to produce rare earth *** the present study,microwave leaching process was conducted to dissolve rare earth elements yttrium(Y),europium(Eu),and remaining rare earth elements(REEs)present in the phosphor powder of the fluorescent *** the yields were *** the microwave leaching process,the effects of the temperature(80-160℃),acid type(hydrochloric acid(HCl),nitric acid(HNO_(3)),sulphuric acid(H_(2)SO_(4))),acid concentration(0.5-6 mol/L),solid to liquid ratio(0.1:10-0.5:10)and reaction time(5-90 min)parameters on leaching efficiencies of varying rare earth elements and calcium were *** highest yield was obtained in the direct microwave leaching of fluorescent waste with the experimental conditions of 6 mol/L HCl,160℃,0.1:10 solid-to-liquid ratio(S:L),and 90 *** energy calculations were made,and kinetic models of the reactions were obtained,and it is observed that Y and Eu dissolution is diffusion-controlled,on the other hand,lanthanum(La),cerium(Ce),and terbium(Tb)were examined to be chemical reaction ***,calcium(Ca)and gadolinium(Gd)seem coherent with the mixed ***,mathematical models of all experimental studies are created with the response surface Box-Behnken method and the correlation coefficients of all the models are over 90%.

关键词： Rare earth elements(REEs) Direct microwave leaching Fluorescent waste Kinetic models Response surface method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

CVTD: A Robust Car-Mounted Video Text Detector

引用

Computers, materials & Continua 2024年第2期78卷 1821-1842页

作者： Di Zhou Jianxun Zhang Chao Li Yifan Guo Bowen Li department of Computer Science and engineering Chongqing University of TechnologyChongqingChina College of Information and engineering Jingdezhen Ceramic UniversityJingdezhenChina

Text perception is crucial for understanding the semantics of outdoor scenes,making it a key requirement for building intelligent systems for driver assistance or autonomous *** information in car-mounted videos can assist drivers in making ***,Car-mounted video text images pose challenges such as complex backgrounds,small fonts,and the need for real-time *** proposed a robust Car-mounted Video Text Detector(CVTD).It is a lightweight text detection model based on ResNet18 for feature extraction,capable of detecting text in arbitrary *** model efficiently extracted global text positions through the Coordinate Attention Threshold Activation(CATA)and enhanced the representation capability through stacking two Feature Pyramid Enhancement Fusion Modules(FPEFM),strengthening feature representation,and integrating text local features and global position information,reinforcing the representation capability of the CVTD *** enhanced feature maps,when acted upon by Text Activation Maps(TAM),effectively distinguished text foreground from non-text ***,we collected and annotated a dataset containing 2200 images of Car-mounted Video Text(CVT)under various road conditions for training and evaluating our model’s *** further tested our model on four other challenging public natural scene text detection benchmark datasets,demonstrating its strong generalization ability and real-time detection *** model holds potential for practical applications in real-world scenarios.

关键词： Deep learning text detection Car-mounted video text detector intelligent driving assistance arbitrary shape text detector

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advancements in enhancing corrosion protection of Mg alloys:A comprehensive review on the synergistic effects of combining inhibitors with PEO coating

引用

Journal of Magnesium and Alloys 2024年第2期12卷 465-489页

作者： Arash Fattah-alhosseini Abdelhameed Fardosi Minoo Karbasi Mosab Kaseem department of materials engineering Faculty of EngineeringBu-Ali Sina UniversityHamedanIran department of Nanotechnology and Advanced materials engineering Sejong UniversitySeoul 05006Republic of Korea

Magnesium(Mg)alloys are lightweight materials with excellent mechanical properties,making them attractive for various applications,including aerospace,automotive,and biomedical ***,the practical application of Mg alloys is limited due to their high susceptibility to *** electrolytic oxidation(PEO),or micro-arc oxidation(MAO),is a coating method that boosts Mg alloys'corrosion ***,despite the benefits of PEO coatings,they can still exhibit certain limitations,such as failing to maintain long-term protection as a result of their inherent *** address these challenges,researchers have suggested the use of inhibitors in combination with PEO coatings on Mg *** are chemical compounds that can be incorporated into the coating or applied as a post-treatment to further boost the corrosion resistance of the PEO-coated Mg *** inhibitors,whether organic or inorganic,can act by forming a protective barrier,hindering the corrosion process,or modifying the surface properties to reduce susceptibility to *** can be made of various materials,including polyelectrolyte shells,layered double hydroxides,polymer shells,and mesoporous inorganic *** corrosion inhibitors in containers fully compatible with the coating matrix and substrate is a promising approach for their *** studies of the combination of inhibitors with PEO coatings on Mg alloys have shown promising results,demonstrating significant corrosion mitigation,extending the service life of Mg alloy components in aggressive environments,and providing self-healing *** general,this review presents available information on the incorporation of inhibitors with PEO coatings,which can lead to improved performance of Mg alloy components in demanding environments.

关键词： Inhibitor Mg alloy Self-healing coating Plasma electrolytic oxidation(PEO) Corrosion protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructing Built-In Electric Fields with Semiconductor Junctions and Schottky Junctions Based on Mo-MXene/Mo-Metal Sulfides for Electromagnetic Response

引用

Nano-Micro Letters 2024年第10期16卷 453-473页

作者： Xiaojun Zeng Xiao Jiang Ya Ning Yanfeng Gao Renchao Che School of materials Science and engineering Jingdezhen Ceramic UniversityJingdezhen 333403People's Republic of China School of materials Science and engineering Shanghai UniversityShanghai 200444People's Republic of China Laboratory of Advanced materials Shanghai Key Lab of Molecular Catalysis and Innovative MaterialsAcademy for Engineering and TechnologyFudan UniversityShanghai 200438People's Republic of China Zhejiang Laboratory Hangzhou 311100People's Republic of China

The exploration of novel multivariate heterostructures has emerged as a pivotal strategy for developing high-performance electromagnetic wave(EMW)absorption ***,the loss mechanism in traditional heterostructures is relatively simple,guided by empirical observations,and is not *** this work,we presented a novel semiconductor-semiconductor-metal heterostructure sys-tem,Mo-MXene/Mo-metal sulfides(metal=Sn,Fe,Mn,Co,Ni,Zn,and Cu),including semiconductor junctions and Mott-Schottky *** skillfully combining these distinct functional components(Mo-MXene,MoS_(2),metal sulfides),we can engineer a multiple heterogeneous interface with superior absorption capabilities,broad effective absorption bandwidths,and ultrathin matching *** successful establishment of semiconductor-semiconductor-metal heterostructures gives rise to a built-in electric field that intensifies electron transfer,as confirmed by density functional theory,which collaborates with multiple dielectric polarization mechanisms to substantially amplify EMW *** detailed a successful synthesis of a series of Mo-MXene/Mo-metal sulfides featuring both semiconductor-semiconductor and semiconductor-metal *** achievements were most pronounced in Mo-MXene/Mo-Sn sulfide,which achieved remarkable reflection loss values of-70.6 dB at a matching thickness of only 1.885 *** cross-section calculations indicate that these MXene/Mo-metal sulfides have tremendous potential in practical military stealth *** work marks a departure from conventional component design limitations and presents a novel pathway for the creation of advanced MXene-based composites with potent EMW absorption capabilities.

关键词： Semiconductor-semiconductor-metal heterostructure Semiconductor junctions Mott-Schottky junctions Built-in electric field Electromagnetic wave absorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nickel Sulfide Modified NiCu Nanoalloy with Excellent Oxygen Evolution Reaction Properties Prepared through Electrospinning and Heat Treatment

引用

Journal of Wuhan University of Technology(materials Science) 2024年第2期39卷 320-326页

作者：李涛凌帅 ZHONG Shujie LOU Qiongyue department of materials engineering School of Mechanical EngineeringChengdu UniversityChengdu 610106China

Ni^(2+)/Cu^(2+)/SO_(4)^(2-)/polyvinyl alcohol precursor fibers with uniform diameters were prepared through ***-based composite nanoalloys containing Ni,Cu,and S were prepared through heat treatment in an Ar *** experimental results show that the main components of the prepared nanoalloys are NiCu,Ni_(3)S_(2),Ni,and *** nanoalloys exhibit fine grain sizes about 200-500 nm,which can increase with increasing heat treatment *** test results show that the nickel sulfidemodified NiCu nanoalloy composites exhibit excellent oxygen evolution reaction properties,and the oxygen evolution reaction properties gradually improve with the increasing heat treatment *** sample prepared at 1 000℃ for 40 min show a low overpotential of 423 mV and a small Tafel slope of 134 mV·dec^(-1) at a current density of 10 mA·cm^(-2).

关键词： NiCu nanoalloy Ni_(3)S_(2) structure transformation oxygen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：