检索结果-南通市图书馆

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won department of chemical and Biological engineering Korea University department of chemical engineering (Integrated process) Kyung Hee University department of chemical engineering and materials science Ewha Womans University department of chemical engineering Pukyong National University Resources engineering Plant Research department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Biorefinery Carbon mitigation Climate change Global warming Lignin utilization Bioeconomy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Synergistically enhanced ORR and HER performance on Co-N-C coupled in-situ generated PtCo intermetallic

引用

Journal of Energy Chemistry 2025年第1期100卷 721-729页

作者： Guanyu Luo Min Song Lulu An Xiao Huang Qian Zhang Chenhao Zhang Tao Shen Shuang Wang Deli Wang Key Laboratory of material Chemistry for Energy Conversion and Storage (Huazhong University of science and Technology) Ministry of Education School of Chemistry and Chemical Engineering Huazhong University of Science and Technology

Integrating multi-scale sites in a composite catalyst is vital to realize efficient ***,a synergistic composite catalyst consisting of Co atomic sites and in-situ generated PtCo intermetallic compounds （IMCs）(o-PtCo@CoNC) is proposed through Co pre-anchoring and subsequent impregnation-reduction *** loading of Co atoms provides a chance for in-situ generating PtCo ordered intermetallic *** remaining Co single atoms and PtCo IMCs construct synergistic electrocatalytic *** from the ordered structure,synergistic effect of Pt Co IMCs and Co single atoms,o-PtCo@CoNC exhibits excellent electrocatalytic performance for oxygen reduction reaction （ORR） and hydrogen evolution reaction （HER） with mass activity of 1.21 A mgPt-1（at 0.9 V） and5.70 A mgPt-1（at an overpotential of 100 mV）,***,o-PtCo@CoNC delivers negligible loss of half-wave potential and overpotential during long-term stability test in acid solutions,with 13 mV decay after 50,000 potential cycles for ORR and a 2.7 mV decay after 20,000 potential cycles for *** integration strategy of single-atomic sites coupled IMCs paves the way for enhancing the activity and durability of Pt-based electrocatalysts.

关键词： Electrolytic reduction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Co/Co_(7)Fe_(3)heterostructures with controllable alloying degree on carbon spheres as bifunctional electrocatalyst forrechargeable zinc-air batteries

引用

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 476-487页

作者： Junkang Chen Yongyue Zhuang Yanxin Qiao Yu Zhang Aihua Yuan Hu Zhou School of materials science and engineering Jiangsu University of Science and TechnologyZhenjiang 212003China School of Environmental and chemical engineering Jiangsu University of Science and TechnologyZhenjiang 212003China

Exploring efficient and nonprecious metal electrocatalysts of oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)is crucial for developing rechargeable zinc-air batteries(ZABs).Herein,an alloying-degree control strategy was employed to fabricate nitrogen-doped carbon sphere(NCS)decorated with dual-phase Co/Co_(7)Fe_(3)heterojunctions(CoFe@NCS).The phase composition of materials has been adjusted by controlling the alloying *** optimal CoFe_(0.08)@NCS electrocatalyst displays a half-wave potential of 0.80 V for ORR and an overpotential of 283 mV at 10 mA·cm^(-2)for OER in an alkaline *** intriguing bifunctional electrocatalytic activity and durability is attributed to the hierarchically porous structure and interfacial electron coupling of highly-active Co_(7)Fe_(3)alloy and metallic Co *** the CoFe_(0.08)@NCS material is used as air-cathode catalyst of rechargeable liquid-state zinc-air battery(ZAB),the device shows a high peak power-density(157 mW·cm^(-2))and maintains a stable voltage gap over 150 h,outperforming those of the benchmark(Pt/C+RuO_(2))-based *** particular,the as-fabricated solid-state flexible ZAB delivers a reliable compatibility under different bending *** work provides a promising strategy to develop metal/alloy-based electrocatalysts for the application in renewable energy conversion technologies.

关键词： bifunctional electrocatalysts oxygen reduction reaction oxygen evolution reaction zinc-air battery metal/alloy carbon sphere

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High-temperature-tolerant flexible supercapacitors: Gel polymer electrolytes and electrode materials

引用

Journal of Energy Chemistry 2025年第1期100卷 426-457页

作者： Chong Peng Xinyi Huang Mingwei Zhao Shuling Liao Quanhong Yang Nianjun Yang Siyu Yu School of Chemistry & chemical engineering Southwest University Nanoyang Group Tianjin Key Laboratory of Advanced Carbon and Electrochemical Energy Storage School of Chemical Engineering and Technology and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) Tianjin University department of Chemistry & IMO-IMOMEC Hasselt University

The development of flexible supercapacitors(FSCs) capable of operating at high temperatures is crucial for expanding the application areas and operating conditions of supercapacitors. Gel polymer electrolytes and electrode materials stand as two key components that significantly impact the efficacy of hightemperature-tolerant FSCs(HT-FSCs). They should not only exhibit high electrochemical performance and excellent flexibility, but also withstand intense thermal stress. Considerable efforts have been devoted to enhancing their thermal stability while maintaining high electrochemical and mechanical performance. In this review, the fundamentals of HT-FSCs are outlined. A comprehensive overview of state-of-the-art progress and achievements in HT-FSCs, with a focus on thermally stable gel polymer electrolytes and electrode materials is provided. Finally, challenges and future perspectives regarding HT-FSCs are discussed, alongside strategies for elevating operational temperatures and *** review offers both theoretical foundations and practical guidelines for designing and manufacturing HT-FSCs, further promoting their widespread adoption across diverse fields.

关键词： Flexible supercapacitors High-temperature tolerance Gel polymer electrolytes Electrode materials

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effects of carbon content on the microstructure and tensile properties of a low-density steel

引用

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Universal design of three-dimensional porous graphene-iron based promotors for kinetically rationalized lithium-sulfur chemistry

引用

Journal of Energy Chemistry 2025年第1期100卷 192-200页

作者： Hua Gao Yunfeng Zhang Menglei Wang Ruoxuan Yang Shuai Feng Xuan Cao Yaping Zhang Zhongyuan Lu Yingze Song State Key Laboratory of Environment-Friendly Energy materials School of Materials and Chemistry Southwest University of Science and Technology School of material science and engineering Henan University of Technology College of Chemistry and chemical engineering Taishan University

Lithium-sulfur （Li-S） batteries are widely deemed to be one of the most potential candidates for future secondary batteries because of their remarkable energy ***,notorious polysulfide shuttling and retarded sulfur reaction kinetics pose significant obstacles to the further application of Li-S *** rationally designed highly active electrocatalysts can facilitate polysulfide conversion,the universal and scalable synthesis strategies need to be ***,a universal synthetic strategy to construct a series of three-dimensional （3D） porous graphene-iron （3DGr-Fe） based electrocatalysts involving 3DGr-FeP,3DGr-Fe3C,and 3DGr-Fe3Se4is exploited for manipulating the Li-S redox *** has been observed that the implementation of a 3D porous Gr architecture leads to the well-designed conductive networks,while the uniformly dispersed iron nanoparticles introduce an abundance of active sites,fostering the lithium polysulfide conversion,thereby bolstering the overall electrochemical *** Li-S battery with the 3DGr-Fe based electrocatalyst exhibits remarkable capacity retention of 94.8%upon 100 times at 0.2 ***,the soft-packaged Li-S pouch cell based on such a 3DGr-Fe electrocatalyst delivers superior capacity of 1060.71 mA h g-1and guarantees for the continuous 30 min work of fan *** investigation gives comprehensive insights into the design,synthesis,and mechanism of 3DGr-Fe based electrocatalysts with high activity toward efficient and durable Li-S batteries.

关键词： Lithium-sulfur battery Universal synthesis 3D graphene-iron based promotor Electrocatalysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He department of materials science and engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology department of chemical sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Nickle oxide Magnetron sputter Defect Stability Perovskite solar cell

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

引用

Journal of Energy Chemistry 2025年第1期100卷 702-709页

作者： Yiman Gu Yanchao Zhang Zhanyu Li Yijia Lei Baozeng Sun Xiaoyu Yu Zhe Wang College of Chemistry and Life science Changchun University of Technology College of chemical engineering Changchun University of Technology School of materials science and engineering Changchun University of Technology Key Laboratory of Advanced Functional Polymer Membrane materials of Jilin Province

The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes （AEMs） has been widely ***,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains *** strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being ***,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone （x=40,50,and 60） into the main chain of poly（p-terphenylene isatin）.Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation *** results show that PTI-PTF50-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of *** has an ionic conductivity of 133.83 mS cm-1at 80°*** addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of *** cell polarization curve based on PTI-PTF50-NOH shows a power density of 734.76 mW cm-2at a current density of 1807.7 mA cm-2.

关键词： Anion exchange membranes Poly(p-terphenylene isatin) Hydrophilic-hydrophobic phase separation Fluorinated group

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

From waste to wealth:Coal tar residue derived carbon materials as low-cost anodes for potassium-ion batteries

引用

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 464-475页

作者： Zhonghua Lu Jun Shen Xin Zhang Lingcong Chao Liang Chen Ding Zhang Tao Wei Shoudong Xu College of chemical engineering and Technology Taiyuan University of TechnologyTaiyuan 030024China College of Chemistry Taiyuan University of TechnologyTaiyuan 030024China School of chemical engineering and Pharmacy Wuhan Institute of TechnologyWuhan 430205China School of Energy and Power Jiangsu University of Science and TechnologyZhenjiang 212003China

Carbon materials are widely recognized as highly promising electrode materials for various energy storage system *** tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable *** this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances *** on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were ***,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of *** indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”*** work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.

关键词： coal tar residue carbon materials anode potassium-ion batteries high value-added

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ru doping triggering reconstruction of cobalt phosphide for coupling glycerol electrooxidation with seawater electrolysis

引用

Journal of Energy Chemistry 2025年第1期100卷 317-326页

作者： Binglu Deng Jie Shen Jinxing Lu Chuqiang Huang Zhuoyuan Chen Feng Peng Yunpeng Liu School of materials science and Hydrogen Energy Foshan University School of Chemistry and chemical engineering Guangzhou University Guangdong Key Laboratory for Hydrogen Energy Technologies

Seawater electrolysis is a promising approach for sustainable energy without relying on precious ***,the large-scale seawater electrolysis is hindered by low catalytic efficiency and severe anode corrosion caused by the harmful *** contrast to the oxygen evolution reaction （OER）and chlorin ion oxidation reaction （ClOR）,glycerol oxidation reaction （GOR） is more thermodynamically and kinetically favorable ***,a Ru doping cobalt phosphide （Ru-CoP2） is proposed as a robust bifunctional electrocatalyst for seawater electrolysis and GOR,for the concurrent productions of hydrogen and value-added *** in situ and ex situ characterization analyses demonstrated that Ru doping featured in the dynamic reconstruction process from Ru-CoP2to Ru-CoOOH,accounting for the superior GOR *** coupling GOR with hydrogen evolution was realized by employing Ru-CoP2as both anode and cathode,requiring only a low voltage of 1.43 V at 100 mA cm-2,which was 250 m V lower than that in alkaline *** work guides the design of bifunctional electrocatalysts for energy-efficient seawater electrolysis coupled with biomass resource upcycling.

关键词： Glycerol electrooxidation Hydrogen evolution Ru doping Cobalt phosphide Bifunctional electrocatalysts

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：