检索结果-南通市图书馆

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won department of Chemical and Biological engineering Korea University department of Chemical engineering (Integrated process) Kyung Hee University department of Chemical engineering and Materials Science Ewha Womans University department of Chemical engineering Pukyong National University Resources engineering Plant Research department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Biorefinery Carbon mitigation Climate change Global warming Lignin utilization Bioeconomy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dynamic Multi-Graph Spatio-Temporal Graph Traffic Flow Prediction in Bangkok:An Application of a Continuous Convolutional Neural Network

引用

Computer Modeling in engineering & Sciences 2025年第1期142卷 579-607页

作者： Pongsakon Promsawat Weerapan Sae-dan Marisa Kaewsuwan Weerawat Sudsutad Aphirak Aphithana department of Civil engineering Faculty of EngineeringRamkhamkaeng UniversityBangkok10240Thailand department of Computer engineering Faculty of EngineeringRamkhamkaeng UniversityBangkok10240Thailand department of Statistics Faculty of ScienceRamkhamkaeng UniversityBangkok10240Thailand

The ability to accurately predict urban traffic flows is crucial for optimising city ***,various methods for forecasting urban traffic have been developed,focusing on analysing historical data to understand complex mobility *** learning techniques,such as graph neural networks(GNNs),are popular for their ability to capture spatio-temporal ***,these models often become overly complex due to the large number of hyper-parameters *** this study,we introduce Dynamic Multi-Graph Spatial-Temporal Graph Neural Ordinary Differential Equation Networks(DMST-GNODE),a framework based on ordinary differential equations(ODEs)that autonomously discovers effective spatial-temporal graph neural network(STGNN)architectures for traffic prediction *** comparative analysis of DMST-GNODE and baseline models indicates that DMST-GNODE model demonstrates superior performance across multiple datasets,consistently achieving the lowest Root Mean Square Error(RMSE)and Mean Absolute Error(MAE)values,alongside the highest *** the BKK(Bangkok)dataset,it outperformed other models with an RMSE of 3.3165 and an accuracy of 0.9367 for a 20-min interval,maintaining this trend across 40 and 60 ***,on the PeMS08 dataset,DMST-GNODE achieved the best performance with an RMSE of 19.4863 and an accuracy of 0.9377 at 20 min,demonstrating its effectiveness over longer *** Los_Loop dataset results further emphasise this model’s advantage,with an RMSE of 3.3422 and an accuracy of 0.7643 at 20 min,consistently maintaining superiority across all time *** numerical highlights indicate that DMST-GNODE not only outperforms baseline models but also achieves higher accuracy and lower errors across different time intervals and datasets.

关键词： Graph neural networks convolutional neural network deep learning dynamic multi-graph spatio-temporal

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Few-shot learning for screening 2D Ga2CoS4-x supported single-atom catalysts for hydrogen production

引用

Journal of Energy Chemistry 2025年第1期100卷 665-673页

作者： Nabil Khossossi Poulumi Dey department of Mechanical engineering (ME) Delft University of Technology

Hydrogen generation and related energy applications heavily rely on the hydrogen evolution reaction（HER）,which faces challenges of slow kinetics and high *** electrocatalysts,particularly single-atom catalysts （SACs） on two-dimensional （2D） materials,are *** study presents a few-shot machine learning （ML） assisted high-throughput screening of 2D septuple-atomic-layer Ga2CoS4-xsupported SACs to predict HER catalytic ***,density functional theory （DFT）calculations showed that 2D Ga2CoS4is inactive for ***,defective Ga2CoS4-x（x=0–0.25）monolayers exhibit excellent HER activity due to surface sulfur vacancies （SVs）,with predicted overpotentials （0–60 mV） comparable to or lower than commercial Pt/C,which typically exhibits an overpotential of around 50 m V in the acidic electrolyte,when the concentration of surface SV is lower than 8.3%.SVs generate spin-polarized states near the Fermi level,making them effective HER *** demonstrate ML-accelerated HER overpotential predictions for all transition metal SACs on 2D *** DFT data from 18 SACs,an ML model with high prediction accuracy and reduced computation time was *** intrinsic descriptor linking SAC atomic properties to HER overpotential was *** study thus provides a framework for screening SACs on 2D materials,enhancing catalyst design.

关键词： Hydrogen production Electrocatalyst 2D material Density functional theory Machine learning Surface sulfur vacancy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ru/NiMnB spherical cluster pillar for highly proficient green hydrogen electrocatalyst at high current density

引用

Journal of Energy Chemistry 2025年第1期100卷 397-408页

作者： Md Ahasan Habib Shusen Lin Mehedi Hasan Joni Sumiya Akter Dristy Rutuja Mandavkar Jae-Hun Jeong Jihoon Lee department of Electronic engineering College of Electronics and Information Kwangwoon University

Advanced OER/HER electrocatalytic alternatives are crucial for the wide adaptation of green hydrogen ***,Ru/NiMnB spherical cluster pillar （SCP）,denoted as Ru/NiMnB,is synthesized using a combination of electro-deposition and hydrothermal *** investigation of Ru doping in the NiMnB matrix revealed significant improvements in electrocatalytic *** Ru/NiMnB SCPs demonstrate superior OER/HER activity with low overpotentials of 150 and 103 mV at 50mA/cm2in 1 M KOH,making them highly competitive with state-of-the-art ***,the Ru/NiMnB SCPs exhibit a low 2-E cell voltage of 2.80 V at ultra-high current density of 2,000 m A/cm2in 1 M KOH,outperforming the standard benchmark electrodes of RuO2||Pt/C,thereby positioning Ru/NiMnB as one of the best bifunctional *** SCPs exhibit exceptional high-current characteristics,stability and corrosion resistance,as evidenced by continuous operation at 1,000 mA/cm2high-current density for over 150 h in 6 M KOH at elevated temperatures under harsh industrial *** a small amount of Ru incorporation significantly enhances the electrocatalytic performances of NiMnB,attributed to increased active sites and improved intrinsic properties such as conductivity,adsorption/desorption capability and reaction ***,Ru/NiMnB SCPs present a promising bi-functional electrode concept for efficient green H2production.

关键词： Advanced electrocatalyst High current Corrosion resistance Industrial requirement

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Data-Driven Healthcare:The Role of Computational Methods in Medical Innovation

引用

Computer Modeling in engineering & Sciences 2025年第1期142卷 1-48页

作者： Hariharasakthisudhan Ponnarengan Sivakumar Rajendran Vikas Khalkar Gunapriya Devarajan Logesh Kamaraj department of Mechanical engineering Dr.Mahalingam College of Engineering and TechnologyPollachiCoimbatoreTamil Nadu642003India department of Mechanical engineering JKKN College of Engineering and TechnologyKumarapalayamNamakkalTamil Nadu637209India department of Mechanical engineering Gharda Institute of TechnologyLavelMaharashtra415708India department of Electrical and Electronics engineering Sri Eshwar College of EngineeringCoimbatoreTamilnadu641202India department of Mechanical engineering Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and TechnologyChennai600062India

The purpose of this review is to explore the intersection of computational engineering and biomedical science,highlighting the transformative potential this convergence holds for innovation in healthcare and medical *** review covers key topics such as computational modelling,bioinformatics,machine learning in medical diagnostics,and the integration of wearable technology for real-time health *** findings indicate that computational models have significantly enhanced the understanding of complex biological systems,while machine learning algorithms have improved the accuracy of disease prediction and *** synergy between bioinformatics and computational techniques has led to breakthroughs in personalized medicine,enabling more precise treatment ***,the integration of wearable devices with advanced computational methods has opened new avenues for continuous health monitoring and early disease *** review emphasizes the need for interdisciplinary collaboration to further advance this *** research should focus on developing more robust and scalable computational models,enhancing data integration techniques,and addressing ethical considerations related to data privacy and *** fostering innovation at the intersection of these disciplines,the potential to revolutionize healthcare delivery and outcomes becomes increasingly attainable.

关键词： Computational models biomedical engineering bioinformatics machine learning wearable technology

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Dynamic stress concentration in an infinitely long cylindrical cavity due to a point spherical source embedded within a fluid-saturated poroelastic formation of infinite extent

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 139-156页

作者： H.HOSSEINI O.BALILASHAKI department of Mechanical engineering Faculty of EngineeringGolestan University

The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically. It is assumed that the source is located outside the cavity at a specified distance from the borehole axis. The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed. Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid, empty borehole, and rigid inclusion with a hard boundary is employed for the analysis. Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions, the proposed boundary conditions at the interface are satisfied. Stresses are formulated by means of wave potential functions in a three-dimensional(3D) manner. The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra. Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis. To give an overall outline of the study, a numerical example is presented. The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values. In addition, the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole. Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases, and good agreement is achieved.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Semantic Segmentation of Lumbar Vertebrae Using Meijering U-Net(MU-Net)on Spine Magnetic Resonance Images

引用

Computer Modeling in engineering & Sciences 2025年第1期142卷 733-757页

作者： Lakshmi S V V Shiloah Elizabeth Darmanayagam Sunil Retmin Raj Cyril department of Computer Science and engineering College of Engineering GuindyAnna UniversityChennai600025India department of Information Technology Madras Institute of TechnologyAnna UniversityChrompetChennai600044India

Lower back pain is one of the most common medical problems in the world and it is experienced by a huge percentage of people *** to its ability to produce a detailed view of the soft tissues,including the spinal cord,nerves,intervertebral discs,and vertebrae,Magnetic Resonance Imaging is thought to be the most effective method for imaging the *** semantic segmentation of vertebrae plays a major role in the diagnostic process of lumbar *** is difficult to semantically partition the vertebrae in Magnetic Resonance Images from the surrounding variety of tissues,including muscles,ligaments,and intervertebral discs.U-Net is a powerful deep-learning architecture to handle the challenges of medical image analysis tasks and achieves high segmentation *** work proposes a modified U-Net architecture namely MU-Net,consisting of the Meijering convolutional layer that incorporates the Meijering filter to perform the semantic segmentation of lumbar vertebrae L1 to L5 and sacral vertebra ***-colour mask images were generated and used as ground truth for training the *** work has been carried out on 1312 images expanded from T1-weighted mid-sagittal MRI images of 515 patients in the Lumbar Spine MRI Dataset publicly available from Mendeley *** proposed MU-Net model for the semantic segmentation of the lumbar vertebrae gives better performance with 98.79%of pixel accuracy(PA),98.66%of dice similarity coefficient(DSC),97.36%of Jaccard coefficient,and 92.55%mean Intersection over Union(mean IoU)metrics using the mentioned dataset.

关键词： Computer aided diagnosis(CAD) magnetic resonance imaging(MRI) semantic segmentation lumbar vertebrae deep learning U-Net model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multi-model ensemble learning for battery state-of-health estimation:Recent advances and perspectives

引用

Journal of Energy Chemistry 2025年第1期100卷 739-759页

作者： Chuanping Lin Jun Xu Delong Jiang Jiayang Hou Ying Liang Zhongyue Zou Xuesong Mei State Key Laboratory for Manufacturing Systems engineering Xi'an Jiaotong University Shaanxi Key Laboratory of Intelligent Robots School of Mechanical Engineering Xi'an Jiaotong University department of Electrical engineering and Automation Luoyang Institute of Science and Technology School of Mechanical engineering Hangzhou Dianzi University

The burgeoning market for lithium-ion batteries has stimulated a growing need for more reliable battery performance monitoring. Accurate state-of-health(SOH) estimation is critical for ensuring battery operational performance. Despite numerous data-driven methods reported in existing research for battery SOH estimation, these methods often exhibit inconsistent performance across different application scenarios. To address this issue and overcome the performance limitations of individual data-driven models,integrating multiple models for SOH estimation has received considerable attention. Ensemble learning(EL) typically leverages the strengths of multiple base models to achieve more robust and accurate outputs. However, the lack of a clear review of current research hinders the further development of ensemble methods in SOH estimation. Therefore, this paper comprehensively reviews multi-model ensemble learning methods for battery SOH estimation. First, existing ensemble methods are systematically categorized into 6 classes based on their combination strategies. Different realizations and underlying connections are meticulously analyzed for each category of EL methods, highlighting distinctions, innovations, and typical applications. Subsequently, these ensemble methods are comprehensively compared in terms of base models, combination strategies, and publication trends. Evaluations across 6 dimensions underscore the outstanding performance of stacking-based ensemble methods. Following this, these ensemble methods are further inspected from the perspectives of weighted ensemble and diversity, aiming to inspire potential approaches for enhancing ensemble performance. Moreover, addressing challenges such as base model selection, measuring model robustness and uncertainty, and interpretability of ensemble models in practical applications is emphasized. Finally, future research prospects are outlined, specifically noting that deep learning ensemble is poised to advance ens

关键词： Lithium-ion battery State-of-health estimation Data-driven Machine learning Ensemble learning Ensemble diversity

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

An SPH Framework for Earthquake-Induced Liquefaction Hazard Assessment of Geotechnical Structures

引用

Computer Modeling in engineering & Sciences 2025年第1期142卷 251-277页

作者： Sourabh Mhaski G.V.Ramana department of Civil engineering Indian Institute of Technology DelhiNew Delhi110016India

Earthquake-induced soil liquefaction poses significant risks to the stability of geotechnical structures *** understanding of the liquefaction triggering,and the post-failure large deformation behaviour is essential for designing resilient *** present study develops a Smoothed Particle Hydrodynamics(SPH)framework for earthquake-induced liquefaction hazard assessment of geotechnical *** coupled flowdeformation behaviour of soils subjected to cyclic loading is described using the PM4Sand model implemented in a three-phase,single-layer SPH framework.A staggered discretisation scheme based on the stress particle SPH approach is adopted to minimise numerical inaccuracies caused by zero-energy modes and tensile ***,non-reflecting boundary conditions for seismic analysis of semi-infinite soil domains using the SPH method are *** numerical framework is employed for the analysis of cyclic direct simple shear test,seismic analysis of a level ground site,and liquefaction-induced failure of the Lower San Fernando *** agreement for liquefaction triggering and post-failure behaviour demonstrates that the SPH framework can be utilised to assess the effect of seismic loading on field-scale geotechnical *** present study also serves as the basis for future advancements of the SPH method for applications related to earthquake geotechnical engineering.

关键词： Earthquake seismic liquefaction stress particle PM4Sand smoothed particle hydrodynamics(SPH)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Steel Surface Defect Recognition in Smart Manufacturing Using Deep Ensemble Transfer Learning-Based Techniques

引用

Computer Modeling in engineering & Sciences 2025年第1期142卷 231-250页

作者： Tajmal Hussain Jongwon Seok department of Information and Communication engineering Changwon National UniversityChangwon51140Republic of Korea

Smart manufacturing and Industry 4.0 are transforming traditional manufacturing processes by utilizing innovative technologies such as the artificial intelligence(AI)and internet of things(IoT)to enhance efficiency,reduce costs,and ensure product *** light of the recent advancement of Industry 4.0,identifying defects has become important for ensuring the quality of products during the manufacturing *** this research,we present an ensemble methodology for accurately classifying hot rolled steel surface defects by combining the strengths of four pre-trained convolutional neural network(CNN)architectures:VGG16,VGG19,Xception,and Mobile-Net V2,compensating for their individual *** evaluated our methodology on the Xsteel surface defect dataset(XSDD),which comprises seven different *** ensemble methodology integrated the predictions of individual models through two methods:model averaging and weighted *** evaluation showed that the model averaging ensemble achieved an accuracy of 98.89%,a recall of 98.92%,a precision of 99.05%,and an F1-score of 98.97%,while the weighted averaging ensemble reached an accuracy of 99.72%,a recall of 99.74%,a precision of 99.67%,and an F1-score of 99.70%.The proposed weighted averaging ensemble model outperformed the model averaging method and the individual models in detecting defects in terms of accuracy,recall,precision,and *** analysis with recent studies also showed the superior performance of our methodology.

关键词： Smart manufacturing CNN steel defects ensemble models

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：