检索结果-南通市图书馆

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He department of Materials science and Engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology department of Chemical sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Nickle oxide Magnetron sputter Defect Stability Perovskite solar cell

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transforming Education with Photogrammetry:Creating Realistic 3D Objects for Augmented Reality Applications

引用

Computer Modeling in Engineering & sciences 2025年第1期142卷 185-208页

作者： Kaviyaraj Ravichandran Uma Mohan department of Computational Intelligence School of ComputingSRM Institute of Science and TechnologyKattankulathur603203India

Augmented reality(AR)is an emerging dynamic technology that effectively supports education across different *** increased use of mobile devices has an even greater *** the demand for AR applications in education continues to increase,educators actively seek innovative and immersive methods to engage students in ***,exploring these possibilities also entails identifying and overcoming existing barriers to optimal educational ***,this surge in demand has prompted the identification of specific barriers,one of which is three-dimensional(3D)*** 3D objects for augmented reality education applications can be challenging and time-consuming for the *** address this,we have developed a pipeline that creates realistic 3D objects from the two-dimensional(2D)*** for augmented and virtual reality can then utilize these created 3D *** evaluated the proposed pipeline based on the usability of the 3D object and performance ***,with 117 respondents,the co-creation team was surveyed with openended questions to evaluate the precision of the 3D object created by the proposed photogrammetry *** analyzed the survey data using descriptive-analytical methods and found that the proposed pipeline produces 3D models that are positively accurate when compared to real-world objects,with an average mean score above *** study adds new knowledge in creating 3D objects for augmented reality applications by using the photogrammetry technique;finally,it discusses potential problems and future research directions for 3D objects in the education sector.

关键词： Augmented reality education immersive learning 3D object creation photogrammetry and StructureFromMotion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Unlocking the stable interface in aqueous zinc-ion battery with multifunctional xylose-based electrolyte additives

引用

Journal of Energy Chemistry 2025年第1期100卷 770-778页

作者： Xiaoqin Li Jian Xiang Lu Qiu Xiaohan Chen Yinkun Zhao Yujue Wang Qu Yue Taotao Gao Wenlong Liu Dan Xiao Zhaoyu Jin Panpan Li Institute for Advanced Study Chengdu University School of Mechanical Engineering Chengdu University College of food and Biological Engineering Chengdu University Institute of Fundamental and Frontier sciences University of Electronic Science and Technology of China College of Materials science and Engineering Sichuan University

The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries（AZIBs）. These challenges arise from the inherent conflict between mass transfer and electrochemical kinetics. In this study, we propose the use of a multifunctional electrolyte additive based on the xylose（Xylo） molecule to address these issues by modulating the solvation structure and electrode/electrolyte interface, thereby stabilizing the Zn anode. The introduction of the additive alters the solvation structure, creating steric hindrance that impedes charge transfer and then reduces electrochemical kinetics. Furthermore, in-situ analyses demonstrate that the reconstructed electrode/electrolyte interface facilitates stable and rapid Zn2+ion migration and suppresses corrosion and hydrogen evolution reactions. As a result, symmetric cells incorporating the Xylo additive exhibit significantly enhanced reversibility during the Zn plating/stripping process, with an impressively long lifespan of up to 1986 h, compared to cells using pure ZnSO4electrolyte. When combined with a polyaniline cathode, the full cells demonstrate improved capacity and long-term cyclic stability. This work offers an effective direction for improving the stability of Zn anode via electrolyte design, as well as highperformance AZIBs.

关键词： Solvation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Enhanced post-combustion CO2 capture and direct air capture by plasma surface functionalization of graphene adsorbent

引用

Journal of Energy Chemistry 2025年第1期100卷 653-664页

作者： Rahul Navik Eryu Wang Xiao Ding Huang Yunyi Yiyu Liu Jia Li Guangdong-Hong Kong Joint Laboratory for Carbon Neutrality Jiangmen Laboratory of Carbon and Science and Technology Guangzhou HKUST Fok Ying Tung Research Institute The Hong Kong University of science and technology (Guangzhou) Carbon Neutrality and Climate Change Thrust Society Hub The Hong Kong University of Science and Technology (Guangzhou) Stoddart Institute of Molecular science Department of Chemistry Zhejiang University

Graphene has enormous potential to capture CO2due to its unique properties and ***,graphene-based adsorbents have drawbacks of lower CO2adsorption capacity and poor *** work demonstrates a one-step rapid and sustainable N2/H2plasma treatment process to prepare graphene-based sorbent material with enhanced CO2adsorption *** treatment directly enriches amine species,increases surface area,and improves textural *** CO2adsorption capacity increases from 1.6 to 3.3 mmol/g for capturing flue gas,and from 0.14 to 1.3 mmol/g for direct air capture （DAC）.Importantly,the electrothermal property of the plasma-modified aerogels has been significantly improved,resulting in faster heating rates and significantly reducing energy consumption compared to conventional external heating for regeneration of *** aerogels display improved selectivity of 42 and 87 after plasma modification for 5 and 10 min,*** plasma-treated aerogels display minimal loss between 17%and 19% in capacity after 40 adsorption/desorption cycles,rendering excellent *** N2/H2plasma treatment of adsorbent materials would lower energy expenses and prevent negative effects on the global economy caused by climate change.

关键词： Carbon neutrality CO 2 capture Climate change Plasma treatment Graphene aerogel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Cell polarization in ischemic stroke: molecular mechanisms and advances

引用

Neural Regeneration Research 2025年第3期20卷 632-645页

作者： Yuanwei Li Xiaoxiao Xu Xuan Wu Jiarui Li Shiling Chen Danyang Chen Gaigai Li Zhouping Tang department of Neurology Tongji HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhanHubei ProvinceChina

Ischemic stroke is a cerebrovascular disease associated with high mortality and disability rates. Since the inflammation and immune response play a central role in driving ischemic damage, it becomes essential to modulate excessive inflammatory reactions to promote cell survival and facilitate tissue repair around the injury site. Various cell types are involved in the inflammatory response, including microglia, astrocytes, and neutrophils, each exhibiting distinct phenotypic profiles upon stimulation. They display either proinflammatory or anti-inflammatory states, a phenomenon known as ‘cell polarization.’ There are two cell polarization therapy strategies. The first involves inducing cells into a neuroprotective phenotype in vitro, then reintroducing them autologously. The second approach utilizes small molecular substances to directly affect cells in vivo. In this review, we elucidate the polarization dynamics of the three reactive cell populations(microglia, astrocytes, and neutrophils) in the context of ischemic stroke, and provide a comprehensive summary of the molecular mechanisms involved in their phenotypic switching. By unraveling the complexity of cell polarization, we hope to offer insights for future research on neuroinflammation and novel therapeutic strategies for ischemic stroke.

关键词： astrocyte polarization immune regulation inflammation ischemic injury microglia polarization neutrophil polarization signaling pathways stroke

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy:Microstructural and mechanical characterization

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 414-424页

作者： Gianluca Pirro Alessandra Martucci Alessandro Morri Mariangela Lombardi Lorella Ceschini department of Industrial Engineering(DIN) Alma Mater Studiorum-University of BolognaBologna 40136Italy department of Applied science and technology(DISAT) Politecnico di TorinoTorino TO 10129Italy

Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam(PBF-LB)*** alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications,given its superior mechanical properties,which are approximately 10%higher in terms of ultimate tensile strength(UTS)and yield strength after appropriate heat *** as-built conditions,the alloy is characterized by the presence of soft orthorhombicα″martensite,necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the ***,PBFed Ti6246 components undergo an annealing process that transforms theα″martensite into anα-βlamellar *** primary objective of this research was to develop a solution treatment and aging(STA)heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation *** study investigated the effects of various solution temperatures in theα-βfield(ranging from 800 to 875℃),cooling media(air and water),and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar *** each heat treatment condition,differentα-βmicrostructures were found,varying in terms of theα/βratio and the size of the primaryα-phase *** attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastableβphase present after *** tests were performed on samples subjected to the most promising heat treatment parameters.A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by13%and 23%,respectively,compared with those of the annealed *** surface analyses were conducted to investigate fracture mechanisms.

关键词： powder bed fusion-laser beam titanium alloys heat treatments mechanical properties fractographic analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Repetitive traumatic brain injury–induced complement C1–related inflammation impairs long-term hippocampal neurogenesis

引用

Neural Regeneration Research 2025年第3期20卷 821-835页

作者： Jing Wang Bing Zhang Lanfang Li Xiaomei Tang Jinyu Zeng Yige Song Chao Xu Kai Zhao Guoqiang Liu Youming Lu Xinyan Li Kai Shu department of Neurosurgery Tongji HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhanHubei ProvinceChina department of Neurosurgery Shanxi Bethune HospitalShanxi Academy of Medical SciencesTongji Shanxi HospitalThird Hospital of Shanxi Medical UniversityTaiyuanShanxi ProvinceChina department of Pathophysiology School of Basic Medicine and Tongji Medical CollegeHuazhong University of Science and TechnologyWuhanHubei ProvinceChina Institute for Brain Research Wuhan Center of Brain ScienceHuazhong University of Science and TechnologyWuhanHubei ProvinceChina department of Graduate Student Chongqing Medical UniversityChongqingChina department of Basic Medicine School of Medical ScienceHubei University for NationalitiesEnshiHubei ProvinceChina department of Anatomy School of Basic Medicine and Tongji Medical CollegeHuazhong University of Science and TechnologyWuhanHubei ProvinceChina

Repetitive traumatic brain injury impacts adult neurogenesis in the hippocampal dentate gyrus,leading to long-term cognitive ***,the mechanism underlying this neurogenesis impairment remains *** this study,we established a male mouse model of repetitive traumatic brain injury and performed long-term evaluation of neurogenesis of the hippocampal dentate gyrus after repetitive traumatic brain *** results showed that repetitive traumatic brain injury inhibited neural stem cell proliferation and development,delayed neuronal maturation,and reduced the complexity of neuronal dendrites and *** with repetitive traumatic brain injuryalso showed deficits in spatial memory ***,following repetitive traumatic brain injury,neuroinflammation was enhanced in the neurogenesis microenvironment where C1q levels were increased,C1q binding protein levels were decreased,and canonical Wnt/β-catenin signaling was *** inhibitor of C1 reversed the long-term impairment of neurogenesis induced by repetitive traumatic brain injury and improved neurological *** findings suggest that repetitive traumatic brain injury–induced C1-related inflammation impairs long-term neurogenesis in the dentate gyrus and contributes to spatial memory retrieval dysfunction.

关键词： complement C1 dendrite dentate gyrus hippocampus neural stem cell neurogenesis neuroinflammation neurological function neuron traumatic brain injury

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Semantic Segmentation of Lumbar Vertebrae Using Meijering U-Net(MU-Net)on Spine Magnetic Resonance Images

引用

Computer Modeling in Engineering & sciences 2025年第1期142卷 733-757页

作者： Lakshmi S V V Shiloah Elizabeth Darmanayagam Sunil Retmin Raj Cyril department of Computer science and Engineering College of Engineering GuindyAnna UniversityChennai600025India department of Information technology Madras Institute of TechnologyAnna UniversityChrompetChennai600044India

Lower back pain is one of the most common medical problems in the world and it is experienced by a huge percentage of people *** to its ability to produce a detailed view of the soft tissues,including the spinal cord,nerves,intervertebral discs,and vertebrae,Magnetic Resonance Imaging is thought to be the most effective method for imaging the *** semantic segmentation of vertebrae plays a major role in the diagnostic process of lumbar *** is difficult to semantically partition the vertebrae in Magnetic Resonance Images from the surrounding variety of tissues,including muscles,ligaments,and intervertebral discs.U-Net is a powerful deep-learning architecture to handle the challenges of medical image analysis tasks and achieves high segmentation *** work proposes a modified U-Net architecture namely MU-Net,consisting of the Meijering convolutional layer that incorporates the Meijering filter to perform the semantic segmentation of lumbar vertebrae L1 to L5 and sacral vertebra ***-colour mask images were generated and used as ground truth for training the *** work has been carried out on 1312 images expanded from T1-weighted mid-sagittal MRI images of 515 patients in the Lumbar Spine MRI Dataset publicly available from Mendeley *** proposed MU-Net model for the semantic segmentation of the lumbar vertebrae gives better performance with 98.79%of pixel accuracy(PA),98.66%of dice similarity coefficient(DSC),97.36%of Jaccard coefficient,and 92.55%mean Intersection over Union(mean IoU)metrics using the mentioned dataset.

关键词： Computer aided diagnosis(CAD) magnetic resonance imaging(MRI) semantic segmentation lumbar vertebrae deep learning U-Net model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Transport mechanism in chemically reactive hybrid nanofluid flow containing gyrotactic micro-organisms over a curved oscillatory surface

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 177-192页

作者： M.NAVEED M.IMRAN T.ASGHAR Z.ABBAS department of Mathematics Division of Science and TechnologyUniversity of Education department of Mathematics The Islamia University of Bahawalpur

This paper examines the transport analysis, including both heat transfer and mass transfer, in hybrid nanofluid flow containing gyrotactic microorganisms towards a curved oscillatory surface. The influence of magnetic fields is also inspected in terms of their physical characteristics. To depict the phenomena of transport, modified versions of both Fick's and Fourier's laws are used. Additionally, the characteristics of both heterogeneous and homogeneous chemical reactions are also incorporated. Utilizing a curvilinear coordinate system, the flow problem is formulated as partial differential equations(PDEs)for momentum, concentration, microorganism field, and energy. An analytical solution to the obtained flow equations is achieved utilizing the homotopy analysis method(HAM).The effects of significant flow parameters on the pressure and microorganism fields, velocity, oscillation velocity, concentration, and temperature distributions are shown via graphs. Furthermore, the variations in skin friction, mass transfer rate, heat transfer rate, and local motile number due to different involved parameters are presented in tables and are analyzed in detail. Graphical results indicate that the curves of velocity and temperature fields are enhanced as the values of the solid volume fraction variables *** is also verified that the concentration rate field decreases as the values of the homogeneous reaction strength parameter and the radius of curvature parameter increase, and it increases with the Schmidt number and the heterogeneous reaction strength *** outcomes show a favorable response of the motile number to advanced values of the Peclet number, the Schmidt number, the microorganism difference parameter, and the bio-convective Lewis number.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

引用

Journal of Energy Chemistry 2025年第1期100卷 702-709页

作者： Yiman Gu Yanchao Zhang Zhanyu Li Yijia Lei Baozeng Sun Xiaoyu Yu Zhe Wang College of Chemistry and Life science Changchun University of Technology College of Chemical Engineering Changchun University of Technology School of Materials science and Engineering Changchun University of Technology Key Laboratory of Advanced Functional Polymer Membrane Materials of Jilin Province

The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes （AEMs） has been widely ***,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains *** strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being ***,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone （x=40,50,and 60） into the main chain of poly（p-terphenylene isatin）.Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation *** results show that PTI-PTF50-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of *** has an ionic conductivity of 133.83 mS cm-1at 80°*** addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of *** cell polarization curve based on PTI-PTF50-NOH shows a power density of 734.76 mW cm-2at a current density of 1807.7 mA cm-2.

关键词： Anion exchange membranes Poly(p-terphenylene isatin) Hydrophilic-hydrophobic phase separation Fluorinated group

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：