检索结果-南通市图书馆

Food Science and Human Wellness 2024年

作者： Shuzhen Cheng Siyi Wang Ximing Yang Minghao Xie Qi Yang Lushun Yuan Ming Du National Engineering Research Center of Seafood， Collaborative Innovation Center of Seafood Deep processing， Dalian Polytechnic University department of Vascular Surgery， Shanghai General Hospital， Shanghai Jiao Tong University SKL of Marine Food processing & Safety Control， School of Food Science and technology， Dalian Polytechnic University

Thrombin blockers have been shown to be effective for various pathological conditions， but their use is limited due to the potential for serious bleeding adverse effects. This study introduced a novel bioactive peptide (P-2-CG) from oyster， that mitigated thrombin-mediated barrier dysfunction and prothrombotic phenotypes in human pulmonary microvascular endothelial cells (HPMECs). P-2-CG significantly attenuated the increase in endothelial monolayer permeability induced by thrombin through the possible attenuation of RhoA activation and it promoted barrier recovery by enhancing endothelial cell adhesion. Additionally， P-2-CG was found to decrease the pro-thrombotic phenotype induced by thrombin in HPMEC by reducing the extrinsic trigger TF mRNA expression， which resulted in prolonged plasma clotting time， decreased FXa activation， and reduced thrombin generation. Moreover， P-2-CG inhibited thrombosis efficiently by blocking ICAM-1 and VCAM-1 expression via tyrosine phosphorylation of RelA/p65. P-2-CG inhibits thrombin mediated inflammation and provides a potential therapeutic option for treating endothelial dysfunction and thrombosis.

关键词：

High Power Microwave Treatment Impacts on Microbes in Rough Rice

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rice science 2024年第2期31卷 139-141,I0020,I0021页

作者： Faith OUMA Luthra KAUSHIK Boreddy SREENIVASULA Oduola ABASS Griffiths G.ATUNGULU department of Food Science University of Arkansas Division of AgricultureFayetteville 72704USA department of processing and Food Engineering Dr.NTR College of Agricultural EngineeringBapatla 522101India

As rice consumption increases,ensuring its safety has become a priority for the food *** address this concern,the industry is exploring a single-pass microbial inactivation treatment at the rough rice *** this study,a long-grain rice variety,RT7321[21.2%wet basis(WB)and a 20 mm bed thickness]was exposed to microwave radiation(915 MHz frequency)at powers of 16,18,and 20 kW for durations of 1,2,and 3 *** found that the highest microwave power(20 kW)and the longest exposure duration(3 min)produced the greatest reduction in total aerobic count and total fungal count,reducing them by up to 1.21 and 5.01 log(CFU/g),*** findings provided insights into the used to high-power,shortduration 915 MHz microwave technology for decontamination purposes in rough rice to help improve the microbial safety of *** aim is to develop a single-pass drying approach for microbial inactivation in rice processing facilities while ensuring that the yield and quality is not compromised.

关键词： microwave insight facilities

Desiccation and osmotic resistance mechanism of Cronobacter spp. isolated from powdered infant formula

在线全文

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年

作者： Shiqian Fu Danliangmin Song Xue Qin Lihan Wang Qianyu Zhao Chaoxin Man Xinyan Yang Yujun Jiang Key Laboratory of Animal Protein Food Deep processing technology of Zhejiang Province， Zhejiang-Malaysia Joint Research Laboratory for Agricultural Product processing and Nutrition， College of Food and Pharmaceutical Sciences， Ningbo University Key Laboratory of Dairy Science， Ministry of Education， department of Food Science， Northeast Agricultural University

Cronobacter spp. has strong resistance to desiccation and high permeability in Enterobacteriaceae， and powdered infant formula (PIF) is one of the main contamination routes. In recent years， the contamination of Cronobacter spp. in PIF incidents occur from time to time， causing infant serious diseases or death. In this investigation， matrix-assisted laser desorption/ionization time of flight mass spectrometry was used to identify the phenotypes of 35 Cronobacter strains isolated from PIF and its processing environment. Subsequently， the isolates were evaluated for drying and osmotic pressure tolerance. The results showed that the deactivation rate of the strains ranged from 9.01% to 77.57%， and the highest osmotic pressure condition the strains could tolerate was 6% NaCl. In addition， there was a positive correlation between biofilm formation ability and desiccation resistance. Combined with transcriptomics， Cronobacter spp. can activate biofilm synthesis， produce more trehalose， accumulate betaine and electrolytes to stabilize intracellular structure under the two treatment conditions. 31 and 43 genes were found related to desiccation and permeability resistance， respectively. And some genes (cysM， thuF， ycjO， et al) were found to be associated with two tolerances for the first time.

关键词：

Automatic Rule Discovery for Data Transformation Using Fusion of Diversified Feature Formats

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第7期80卷 695-713页

作者： G.Sunil Santhosh Kumar M.Rudra Kumar department of CSE Jawaharlal Nehru Technological UniversityAnantapur515002India department of CSE Marri Laxman Reddy Institute of Technology and ManagementHyderabad500043India department of Information technology Mahatma Gandhi Institute of TechnologyHyderabad500075India

This article presents an innovative approach to automatic rule discovery for data transformation tasks leveraging XGBoost,a machine learning algorithm renowned for its efficiency and *** framework proposed herein utilizes the fusion of diversified feature formats,specifically,metadata,textual,and pattern *** goal is to enhance the system’s ability to discern and generalize transformation rules fromsource to destination formats in varied ***,the article delves into the methodology for extracting these distinct features from raw data and the pre-processing steps undertaken to prepare the data for the *** sections expound on the mechanism of feature optimization using Recursive Feature Elimination(RFE)with linear regression,aiming to retain the most contributive features and eliminate redundant or less significant *** core of the research revolves around the deployment of the XGBoostmodel for training,using the prepared and optimized feature *** article presents a detailed overview of the mathematical model and algorithmic steps behind this ***,the process of rule discovery(prediction phase)by the trained XGBoost model is explained,underscoring its role in real-time,automated data *** employingmachine learning and particularly,the XGBoost model in the context of Business Rule Engine(BRE)data transformation,the article underscores a paradigm shift towardsmore scalable,efficient,and less human-dependent data transformation *** research opens doors for further exploration into automated rule discovery systems and their applications in various sectors.

关键词： XGBoost business rule engine machine learning categorical query language humanitarian computing environment

Surface repair of wide-bandgap perovskites for high-performance all-perovskite tandem solar cells

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 64-70,I0003页

作者： Xiaojing Lv Weisheng Li Jin Zhang Yujie Yang Xuefei Jia Yitong Ji Qianqian Lin Wenchao Huang Tongle Bu Zhiwei Ren Canglang Yao Fuzhi Huang Yi-Bing Cheng Jinhui Tong State Key Laboratory of Advanced technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan 430070HubeiChina Key Lab of Artificial Micro-and Nano-Structures of Ministry of Education of China School of Physics and TechnologyWuhan UniversityWuhan 430072HubeiChina department of Electrical and Electronic Engineering Photonics Research Institute(PRI)Research Institute for Intelligent Wearable Systems(iWEAR)The Hong Kong Polytechnic University999077Hong KongChina Laboratory of Advanced Materials Fudan UniversityShanghai 200438China Xianhu Laboratory of the Advanced Energy Science and technology Guangdong Laboratory Foshan 528200GuangdongChina

Wide-bandgap(WBG)perovskite solar cells(PSCs)play a fundamental role in perovskite-based tandem solar ***,the efficiency of WBG PSCs is limited by significant open-circuit voltage losses,which are primarily caused by surface *** this study,we present a novel method for modifying surfaces using the multifunctional S-ethylisothiourea hydrobromide(SEBr),which can passivate both Pb^(-1)and FA^(-1)terminated surfaces,Moreover,the SEBr upshifted the Fermi level at the perovskite interface,thereby promoting carrier *** proposed method was effective for both 1.67 and 1.77 eV WBG PSCs,achieving power conversion efficiencies(PCEs)of 22.47%and 19.90%,respectively,with V_(OC)values of 1.28 and 1.33 V,along with improved film and device *** this advancement,we were able to fabricate monolithic all-perovskite tandem solar cells with a champion PCE of 27.10%,This research offers valuable insights for passivating the surface trap states of WBG perovskite through rational multifunctional molecular engineering.

关键词： Wide-bandgap perovskite Surface defect Multifunctional molecule All-perovskite tandem solar cells

High-strength and thermally stable TiB_(2)-modified Al-Mn-Mg-Er-Zr alloy fabricated via selective laser melting

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2221-2232页

作者： Jiang Yu Yaoxiang Geng Yongkang Chen Xiao Wang Zhijie Zhang Hao Tang Junhua Xu Hongbo Ju Dongpeng Wang School of Materials Science and Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China Beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National Engineering Research Center of Near-Net Shape Forming for Metallic Materials Guangdong Provincial Key Laboratory for Processing and Forming of Advanced Metallic MaterialsSouth China University of TechnologyGuangzhou 510640China CEMMPRE-Centre for Mechanical Engineering Materials and Processes Department of Mechanical EngineeringUniversity of CoimbraRua Luís Reis SantosCoimbra 3030-788Portugal

To increase the processability and plasticity of the selective laser melting(SLM)fabricated Al-Mn-Mg-Er-Zr alloys,a novel TiB_(2)-modified Al-Mn-Mg-Er-Zr alloy with a mixture of Al-Mn-Mg-Er-Zr and nano-TiB_(2) powders was fabricated by *** pro-cessability,microstructure,and mechanical properties of the alloy were systematically investigated by density measurement,microstruc-ture characterization,and mechanical properties *** alloys fabricated at 250 W displayed higher relative densities due to a uni-formly smooth top surface and appropriate laser energy *** maximum relative density value of the alloy reached(99.7±0.1)%,demonstrating good *** alloy exhibited a duplex grain microstructure consisting of columnar regions primarily and equiaxed regions with TiB_(2),Al6Mn,and Al3Er phases distributed along the grain *** directly aging treatment at a high tem-perature of 400℃,the strength of the SLM-fabricated TiB_(2)/Al-Mn-Mg-Er-Zr alloy increased due to the precipitation of the secondary Al6Mn *** maximum yield strength and ultimate tensile strength of the aging alloy were measured to be(374±1)and(512±13)MPa,*** SLM-fabricated TiB_(2)/Al-Mn-Mg-Er-Zr alloy demonstrates exceptional strength and thermal stability due to the synergistic effects of the inhibition of grain growth,the incorporation of TiB_(2) nanoparticles,and the precipitation of secondary Al6Mn nanoparticles.

关键词： selective laser melting aluminum alloy processability mechanical properties thermal stability

Boron nitride microribbons strengthened and toughened alumina composite ceramics with excellent mechanical,dielectric,and thermal conductivity properties

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 496-506页

作者： Jilin Wang Dongping Lu Weiping Xuan Yuchun Ji Ruiqi Chen Shaofei Li Wenbiao Li Wenzhuo Chen Shilin Tang Guoyuan Zheng Fei Long Guangxi Key Laboratory of Optical and Electronic Materials and Devices Collaborative Innovation Center for Exploration of Nonferrous Metal Deposits and Efficient Utilization of ResourcesSchool of Materials Science and EngineeringGuilin University of TechnologyGuilin 541004China Key Laboratory of New processing technology for Nonferrous Metals and Materials of Ministry of Education Guilin University of TechnologyGuilin 541004China School of Materials Science and Engineering Peking UniversityBeijing 100871China department of Civil and Environmental Engineering The Hong Kong Polytechnic UniversityKowloon 999077Hong KongChina

Aluminum oxide(Al_(2)O_(3))ceramics have been widely utilized as circuit substrates owing to their exceptional *** this study,boron nitride microribbon(BNMR)/Al_(2)O_(3)composite ceramics are prepared using spark plasma sintering(SPS).This study examines the effect of varying the amount of toughened phase BNMR on the density,mechanical properties,dielectric constant,and thermal conductivity of BNMR/Al_(2)O_(3)composite ceramics while also exploring the mechanisms behind the toughening and increased thermal conductivity of the fabricated *** results showed that for a BNMR content of 5 wt%,BNMR/Al_(2)O_(3)composite ceramics displayed more enhanced characteristics than pure Al_(2)O_(3)*** particular,the relative density,hardness,fracture toughness,and bending strength were 99.95%±0.025%,34.11±1.5 GPa,5.42±0.21 MPa·m^(1/2),and 375±2.5 MPa,*** values represent increases of 0.76%,70%,35%,and 25%,respectively,compared with the corresponding values for pure Al_(2)O_(3)***,during the SPS process,BNMRs are subjected to high temperatures and pressures,resulting in the bending and deformation of the Al_(2)O_(3)matrix;this leads to the formation of special thermal pathways within *** dielectric constant of the composite ceramics decreased by 25.6%,whereas the thermal conductivity increased by 45.6%compared with that of the pure Al_(2)O_(3)*** results of this study provide valuable insights into ways of enhancing the performance of Al_(2)O_(3)-based ceramic substrates by incorporating novel BNMRs as a second *** improvements are significant for potential applications in circuit substrates and related fields that require high-performance materials with improved mechanical properties and thermal conductivities.

关键词： boron nitride microribbons/aluminum oxide(BNMRs/Al_(2)O_(3))composite ceramics boron nitride microribbon(BNMR) spark plasma sintering(SPS) strengthening and toughening thermal conductivity

Experimental and theoretical insight into carbamazepine degradation by chlorine-based advanced oxidation processes:Efficiency,energy consumption,mechanism and DBPs formation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第5期139卷 72-83页

作者： Chunwei Liu Zuo Tong How Yue Ju Li Feng Xuefeng Ren Mohamed Gamal El-Din Key Laboratory ofCoal processing and Efficient Utilization of Ministry of Education School of Chemical Engineering and TechnologyChina University of Mining and TechnologyJiangsu 221116China department of Civil and Environmental Engineering University of AlbertaEdmonton T6G 1H9AlbertaCanada School of Environment and Spatial Informatics China University of Mining and TechnologyJiangsu 221116China Key Laboratory of Agro-Forestry Environmental Processes and Ecological Regulation ofHainan Province School of Ecology and EnvironmentHainan UniversityHainan 570228China

Chlorine has been widely used in different advanced oxidation processes(AOPs)for micropollutants *** this study,different chlorine-based AOPs,namely medium pressure(MP)UV/chlorine,low pressure(LP)UV/chlorine,and in-situ chlorination,were compared for carbamazepine(CBZ)removal efficiency,energy consumption,and disinfection by-products(DBPs)*** three processes could achieve nearly 100%CBZ removal,while the reaction time needed by in-situ chlorination was double the time required by UV/chlorine *** energy consumed per magnitude of CBZ removed(EE/O)of MP UV/chlorine was 13 times higher than that of LP UV/chlorine,and relative to that of in-situ chlorination ***,MP and LP UV/chlorine processes generated one to two orders of magnitude more hydroxyl radicals(^(·)OH)and reactive chlorine species(RCS)than in-situ ***,RCS were the dominant reactive species,contributing to 78.3%,75.6%,and 71.6% of CBZ removal in MP,LP UV/chlorine,and in-situ chlorination,*** to the Gibbs free energy barriers between CBZ and RCS/^(·)OH calculated based on density functional theory(DFT),RCS had more reaction routes with CBZ and showed lower energy barrier in the main CBZ degradation pathways like epoxidation and formation of *** applied to secondary wastewater effluent,UV/chlorine and in-situ chlorination produced overall DBPs ranging from 104.77 to 135.41μg/***,the production of chlorate during UV/chlorine processes was 15 times higher than that during in-situ chlorination.

关键词： UV/chlorine In-situ chlorination Energy efficiency Role of reactive species DFT calculation Disinfection by-products

Preparation of tungsten-particle-reinforced Zr-based bulk metallic glass composites by two-step spark plasma sintering:microstructure evolution,densification mechanism and mechanical properties

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1793-1808页

作者： Yun-Fei Ma Pan Gong Mao Zhang Hui-EHu Zhen Peng Xiao Xu Xin Wang Mehdi Malekan Xue-Feng Tang Lei Deng Jun-Song Jin Xin-Yun Wang State Key Laboratory of Materials processing and Die and Mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430074China Research Institute of Huazhong University of Science and technology in Shenzhen Shenzhen518057China department of Chemistry and Materials Naval University of EngineeringWuhan430032China School of Materials Science and Engineering Jiangsu UniversityZhenjiang212013China College of Machine Shanghai Dianji UniversityShanghai201306China School of Metallurgy and Materials Engineering College of EngineeringUniversity of TehranTehran 11155-4563Iran

A new two-step spark plasma sintering(TSS)process with low-temperature pre-sintering and high-temperature final sintering has been successfully applied to prepare the tungsten-particle(Wp)-reinforced bulk metallic glass composites(Wp/BMGCs).Compared to normal spark plasma sintering(NS),the densification rate and relative density of Wp/BMGCs can be improved by selecting TSS with appropriate sintering pressure in the low temperature pre-sintering ***,the compressive strength and plastic strain of 30%Wp/BMGCs prepared by TSS are both higher than those of the samples prepared by *** TSS process can significantly enhance the compressive strength of 30%Wp/BMGCs by 12%and remarkably increase the plastic strain by 50%,while the trend is completely opposite for 50%Wp/***-in situ experiments and finite element simulations reveal that uneven temperature distribution among particles during low-temperature pre-sintering causes local overheating at contact points between particles,accelerating formation of sintering neck between particles and plastic deformation of *** the volume fraction of Wp is low,TSS can improve the interface bonding between particles by increasing the number of sintering *** makes the fracture mode of Wp/BMGCs being predominantly transgranular ***,as the volume fraction of Wp increases,the adverse effects of Wp plastic deformation are becoming more and more *** aggregated Wp tends to form a solid"cage structure"that hinders the bonding between particles at the interface;correspondingly,the fracture behavior of Wp/BMGCs is mainly dominated by intergranular ***,reducing the sintering pressure during the low-temperature pre-sintering stage of TSS has been shown to effectively decrease plastic deformation in Wp,resulting in a higher degree of densification and better mechanical properties.

关键词： Bulk metallic glass composites Tungsten particle Two-step spark plasma sintering Densification mechanism Mechanical properties

Nucleophilic amino acids as a renewable alternative to petrochemically-derived amines in glycerol epoxy resins

在线全文

学校读者我要写书评

暂无评论

Journal of Bioresources and Bioproducts 2024年第2期9卷 222-232页

作者： Yunyi Liang Yonghong Luo Yingji Wu Xiaona Li Quyet Van Le Jianzhang Li Changlei Xia Jiangsu Co-Innovation Center of Efficient processing and Utilization of Forest Resources International Innovation Center for Forest Chemicals and MaterialsCollege of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037China department of Materials Science and Engineering Institute of Green Manufacturing TechnologyKorea UniversitySeoul 02841South Korea

The standard epoxy resin curing agents revealed are from unsustainable petroleum-based sources,which produce poisonous exhaust when *** acids,a bio-based epoxy curing agent with amino and carboxyl groups,are another potential curing ***-soluble epoxy resins cured with lysine(Lys),glutamic acid(Glu),leucine(Leu),and serine(Ser)as amino acids were *** results showed that the water-soluble epoxy resin(glycerol epoxy resins,GER)was cured with Lys and Glu after *** transform infrared(FT-IR)spectroscopic analysis of the GER-Lys showed that the amino and carboxyl groups of Lys primarily reacted with the epoxy groups of *** elongation at break of Lys-cured GER(GER-Lys)cured at 70℃ with a molar ratio of 1꞉0.75 was 75.32%.The fact that elongations at break of GER-Lys(79.43%)were higher than those of GER-Glu(17.33%),respectively supports the decrease of crosslinking density by the amino acid-cured GER *** potential of Lys and Glu alternatives for petrochemical amines is demonstrated and provides promising opportunities for industrial application.

关键词： Curing agent Amino acids Bio-based epoxy resins Lysine Glutamic acid