检索结果-南通市图书馆

Experimental and Finite Element Analysis of Corroded High-Pressure Pipeline Repaired by Laminated Composite

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第8期140卷 1783-1806页

作者： Seyed Mohammad Reza Abtahi Saeid Ansari Sadrabadi Gholam Hosein Rahimi Gaurav Singh Hamid Abyar Daniele Amato Luigi Federico Faculty of mechanical engineering Tarbiat Modares UniversityTehran***Iran A.Leon Linton department of mechanical Robotics and Industrial EngineeringLawrence Technological UniversitySouthfieldMI48075USA department of mechanical engineering Faculty of EngineeringMeybod UniversityYazd***Iran department of Industrial engineering University of SalernoVia Giovanni PaoloⅡFiscianoItaly Italian Aerospace Research Center(C.I.R.A.) Via MaioriseCapuaCE81043Italy

Repairs of corroded high-pressure pipelines are essential for fluids transportation under high *** of the methods used in their repairs is the use of layered *** composite used must have the necessary ***,the experiments and analytical solutions presented in this paper are performed according to the relevant standards and codes,including ASME PCC-2,ASME B31.8S,ASME B31.4,ISO 24817 and ASME *** addition,the experimental tests are replicated numerically using the finite element *** the strain gauges at different distances from the defect location,can reduce the nonlinear effects,deformation,and fluctuations due to the high *** direct relationship between the depth of an axial defect and the stress concentration is observed at the inner side edges of the *** reparation reduces the non-linearities related to the sharp variation of the geometry and a more reliable numerical simulation could be performed.

关键词： High-pressure pipeline composite repair ASME PCC-2 ISO 24817

Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO_(2)Nanofluid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of mechanical engineering 2024年第2期37卷 115-136页

作者： Yusuf Suleiman Dambatta Changhe Li Mohd Sayuti Ahmed A D Sarhan Min Yang Benkai Li Anxue Chu Mingzheng Liu Yanbin Zhang Zafar Said Zongming Zhou School of mechanical and Automotive engineering Qingdao University of TechnologyQingdao 266520China mechanical engineering department Ahmadu Bello UniversityZaria 810106Nigeria mechanical engineering department University of Malaya50603 Kuala LumpurMalaysia department of mechanical engineering King Fahd University of Petroleum&Minerals31261 DhahranSaudi Arabia State Key Laboratory of Ultra-Precision Machining Technology Department of Industrial and Systems Engineer-ingThe Hong Kong Polytechnic UniversityHong KongChina College of engineering University of Sharjah27272 SharjahUnited Arab Emirates Hanergy(Qingdao)Lubrication Technology Co. Ltd.Qingdao 266100China

Minimum quantity Lubrication(MQL)is a sustainable lubrication system that is famous in many machining *** involve the spray of an infinitesimal amount of mist-like lubricants during machining *** MQL system is affirmed to exhibit an excellent machining performance,and it is highly *** nanofluids are understood to exhibit excellent lubricity and heat evacuation capability,compared to pure oil-based MQL *** have shown that the surface quality and amount of energy expended in the grinding operations can be reduced considerably due to the positive effect of these *** work presents an experimental study on the tribological performance of SiO_(2)nanofluid during grinding of Si_(3)N_(4)*** effect different grinding modes and lubrication systems during the grinding operation was also *** concentrations of the SiO_(2)nanofluid was manufactured using canola,corn and sunflower *** quantitative evaluation of the grinding process was done based on the amount of grinding forces,specific grinding energy,frictional coefficient,and surface *** was found that the canola oil exhibits optimal lubrication performance compared to corn oil,sunflower oil,and traditional lubrication ***,the introduction of ultrasonic vibrations with the SiO_(2)nanofluid in MQL system was found to reduce the specific grinding energy,normal grinding forces,tangential grinding forces,and surface roughness by 65%,57%,65%,and 18%***,regression analysis was used to obtain an optimum parameter *** observations from this work will aid the smooth transition towards ecofriendly and sustainable machining of engineering ceramics.

关键词： Minimum quantity lubrication(MQL) Ultrasonic assisted grinding(UAG) Eco-friendly lubricants Nanofluid Grinding Ceramic

Sn-doped cobalt containing perovskite as the air electrode for highly active and durable reversible protonic ceramic electrochemical cells

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第1期13卷 63-72页

作者： Min Fu Wenjing Hu Hua Tong Xin Ling Linggui Tan Fanglin Chen Zetian Tao School of Resources Environment and Safety EngineeringUniversity of South ChinaHengyang 421001China department of mechanical engineering University of South CarolinaColumbia 29208USA

One potential solution to the problems of energy storage and conversion is the use of reversible protonic ceramic electrochemical cells(R-PCEC),which are based on the solid oxide fuel cell(SOFC)technology and offer a flexible route to the generation of renewable ***,the R-PCEC development faces a range of significant challenges,including slow oxygen reaction kinetics,inadequate durability,and poor round-trip efficiency resulting from the inadequacy of an air *** address these issues,we report novel B-sites doped Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.3)O_(3−δ)(PBCF)with varying amounts of Sn as the air electrode for R-PCEC to further enhance electrochemical performance at lower *** 600℃,R-PCEC with an air electrode consisting of Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.25)Sn_(0.05)O_(3+δ)has achieved peak power density of 1.12 W∙cm^(−2) in the fuel cell mode and current density of 1.79 A∙cm^(−2) in the electrolysis mode at a voltage of 1.3 ***,R-PCECs have shown good stability in the electrolysis mode of 100 *** study presents a practical method for developing durable high-performance air electrodes for R-PCECs.

关键词： triple conducting oxide dual-element doping protonic ceramic electrochemical cells(PCECs) catalytic

Semi-analytical Solutions for Wellbores with Graded Skin Zones in Poroelastic Media

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第3期37卷 385-395页

作者： Zhiqiang Fan Zhihe Jin School of Mechanics Civil Engineering and ArchitectureNorthwestern Polytechnical UniversityXi’an710072China department of mechanical engineering University of MaineOronoME04469USA

In analyzing the complex interaction between the wellbore and the reservoir formation,the hydromechanical properties of the region proximal to the wellbore,referred to as the“wellbore skin zone”,play a pivotal role in determining flow dynamics and the resulting formation *** models of the wellbore skin zone generally assume a constant permeability throughout,resulting in a sharp permeability discontinuity at the skin-reservoir *** paper introduces a model for a wellbore with a continuously graded skin zone of finite thickness within a poroelastic *** solutions are derived using the Laplace transform method,addressing both positive and negative skin *** results are presented to illustrate the effects of graded permeability/skin zone thickness on pore pressures and stresses around a *** results highlight a distinct divergence in stress and pore pressure fields when comparing wellbores with negative skin zones to those with positive skin zones or no skin at all.

关键词： Poroelastic Graded permeability Analytical solution Wellbore Skin zone

Multimode Design and Analysis of an Integrated Leg-Arm Quadruped Robot with Deployable Characteristics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of mechanical engineering 2024年第3期37卷 41-61页

作者： Fuqun Zhao Yifan Wu Xinhua Yang Xilun Ding Kun Xu Sheng Guo Xiaodong Jin School of mechanical engineering and Automation Beihang UniversityBeijing 100191China School of mechanical Electronic and Control EngineeringBeijing Jiaotong UniversityBeijing 100044China

To improve locomotion and operation integration, this paper presents an integrated leg-arm quadruped robot(ILQR) that has a reconfigurable joint. First, the reconfigurable joint is designed and assembled at the end of the legarm chain. When the robot performs a task, reconfigurable configuration and mode switching can be achieved using this joint. In contrast from traditional quadruped robots, this robot can stack in a designated area to optimize the occupied volume in a nonworking state. Kinematics modeling and dynamics modeling are established to evaluate the mechanical properties for multiple modes. All working modes of the robot are classified, which can be defined as deployable mode, locomotion mode and operation mode. Based on the stability margin and mechanical modeling, switching analysis and evaluation between each mode is carried out. Finally, the prototype experimental results verify the function realization and switching stability of multimode and provide a design method to integrate and perform multimode for quadruped robots with deployable characteristics.

关键词： Quadruped robot Multimode design Mode switching Locomotion Operation

Random vibration analysis of FGM plates subjected to moving load using a refined stochastic finite element method

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第4期34卷 42-56页

作者： Ngoc-Tu Do Trung Thanh Tran Faculty of mechanical engineering Hanoi University of IndustryHanoiViet Nam Faculty of mechanical engineering Le Quy Don Technical UniversityHanoiViet Nam

The article introduces a finite element procedure using the bilinear quadrilateral element or four-node rectangular element(namely Q4 element) based on a refined first-order shear deformation theory(rFSDT) and Monte Carlo simulation(MCS), so-called refined stochastic finite element method to investigate the random vibration of functionally graded material(FGM) plates subjected to the moving *** advantage of the proposed method is to use r-FSDT to improve the accuracy of classical FSDT, satisfy the stress-free condition at the plate boundaries, and combine with MCS to analyze the vibration of the FGM plate when the parameter inputs are random quantities following a normal distribution. The obtained results show that the distribution characteristics of the vibration response of the FGM plate depend on the standard deviation of the input parameters and the velocity of the moving ***, the numerical results in this study are expected to contribute to improving the understanding of FGM plates subjected to moving loads with uncertain input parameters.

关键词： FGM Moving load R-FSDT Q4 element Monte Carlo simulation Random vibration

Nonlinear wave dispersion in monoatomic chains with lumped and distributed masses:discrete and continuum models

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第4期45卷 633-648页

作者： E.GHAVANLOO S.EL-BORGI School of mechanical engineering Shiraz UniversityShiraz 71963-16548Iran mechanical engineering Program Texas A&M University at QatarDoha 23874Qatar

The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed *** developed model can represent the wave propagation problem in a non-homogeneous material consisting of heavy inclusions embedded in a *** inclusions are idealized by lumped masses,and the matrix between adjacent inclusions is modeled by a nonlinear spring with distributed ***,the model is capable of depicting the wave propagation in bi-material bars,wherein the first material is represented by a rigid particle and the second one is represented by a nonlinear spring with distributed *** discrete model of the nonlinear monoatomic chain with lumped and distributed masses is first considered,and a closed-form expression of the dispersion relation is obtained by the second-order Lindstedt-Poincare method(LPM).Next,a continuum model for the nonlinear monoatomic chain is derived directly from its discrete lattice model by a suitable continualization *** subsequent use of the second-order method of multiple scales(MMS)facilitates the derivation of the corresponding nonlinear dispersion relation in a closed *** novelties of the present study consist of(i)considering the inertia of nonlinear springs on the dispersion behavior of the discrete mass-spring chains;(ii)developing the second-order LPM for the wave propagation in the discrete chains;and(iii)deriving a continuum model for the nonlinear monoatomic chains with lumped and distributed ***,a parametric study is conducted to examine the effects of the design parameters and the distributed spring mass on the nonlinear dispersion relations and phase velocities obtained from both the discrete and continuum *** parameters include the ratio of the spring mass to the lumped mass,the nonlinear stiffness coefficient of the spring,and the wave amplitude.

关键词： nonlinear mass-spring chain discrete model continuum model LindstedtPoincare method(LPM) method of multiple scales(MMS) dispersion phase velocity

Mechanics and physics under supergravity conditions

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Sinica 2024年第6期40卷 1-2页

作者： Chaofeng Lü Chao Sun Shengqiang Cai Faculty of mechanical engineering and Mechanics Ningbo UniversityNingbo 315211China New Cornerstone Science Laboratory Center for Combustion EnergyDepartment of Energy and Power EngineeringTsinghua UniversityBeijing 100084China department of mechanical and Aerospace engineering University of CaliforniaSan DiegoLa Jolla CA 92093USA

"Supergravity"refers to the conditions where the effective gravity is greater than that of *** conditions are generally relevant to stellar evolution,geophysical movement,astrophysical flows,and *** also frequently occur in various engineering scenarios involving acceleration,such as the launch of space shuttles,operation of rotor engines,impacts and explosions,chemical separation processes,and overloaded testing *** is already demonstrated in physiological experiments that living organisms of animals or plants could be damaged,either temporarily or permanently,when subjected to *** create supergravity conditions for scientific research on the Earth,centrifugal equipment or rapidly rotating devices are omnipresent in various fields,such as aerospace engineering,geophysical science,chemical and biomedical engineering,nuclear engineering,rotating flows,and physical modeling tests.

关键词： geophysical Earth stellar

Development of wet adhesion of honeybee arolium incorporated polygonal structure with three-phase composite interfaces

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第2期12卷 215-230页

作者： Lulu LIANG Jieliang ZHAO Qun NIU Li YU Xiangbing WU Wenzhong WANG Shaoze YAN Zhenglei YU School of mechanical engineering Beijing Institute of TechnologyBeijing 100081China Division of Intelligent and Biomechanical Systems State Key Laboratory of TribologyDepartment of Mechanical EngineeringTsinghua UniversityBeijing 100084China Key of Bionic engineering Ministry of EducationJilin UniversityChangchun 130022China

Inspired by the dynamic wet adhesive systems in nature,various artificial adhesive surfaces have been developed but still face different ***,the theoretical mechanics of wet adhesives has never been sufficiently ***,we develop a novel adhesive mechanism for governing wet adhesion and investigate the biological models of honeybee arolium for reproducing the natural wet adhesive ***-nano structures of honeybee arolium and arolium-prints were observed by Cryogenic scanning electron microscopy(Cryo-SEM),and the air pockets were found in the contact interface ***,the adhesive models with a three-phase composite interface(including air pockets,liquid secretion,and hexagonal frames of arolium),were formed to analyze the wet adhesion of honeybee *** results of theoretical calculations and experiments indicated an enhanced adhesive mechanism of the honeybee by liquid self-sucking effects and air-embolism *** these effects,normal and shear adhesion can be adjusted by controlling the proportion of liquid secretion and air pockets in the contact ***,the air-embolism effects contribute to the optimal coupling of smaller normal adhesion with greater shear adhesion,which is beneficial for the high stride frequency of *** works can provide a fresh perspective on the development of bio-inspired wet adhesive surfaces.

关键词： honeybee arolium air pockets wet adhesion a three-phase interface self-sucking effects air-embolism effects