检索结果-南通市图书馆

In situ polymerization of poly(3,4-ethylenedioxythiophene)protective layer towards stable zinc anode

Nano Research 2025年第1期18卷 382-394页

作者： Debin Luo Peng Zhou Xiaowei Lv Panpan Sun Xiaohua Sun Hewei Zhao College of materials and Chemical engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion MaterialsChina Three Gorges UniversityYichang 443002China Hubei Three Gorges Laboratory Yichang 443007China School of Chemistry Beihang UniversityBeijing 100191China

Aqueous zinc-ion devices are considered promising candidates for energy storage due to their high safety,low cost and relatively high energy ***,the dendrite growth,hydrogen evolution reaction(HER)and corrosion of the zinc anode significantly limit the development of Zn-ion ***,an inexpensive poly(3,4-ethylenedioxythiophene)(PEDOT)protective layer was constructed in situ on the Zn surface using electropolymerization to suppress dendrite growth and side reactions,thereby enhancing the reversibility of *** and theoretical calculations revealed that this hydrophilic protective layer promotes the desolvation process of hydrated Zn^(2+)and facilitates the transport of zinc ions,thus improving the thermodynamic and kinetic properties of Zn^(2+)deposition and inhibiting interfacial side ***,the optimized PEDOT@Zn symmetric battery exhibited a cycling stability exceeding 1250 h at 0.5 mA·cm^(-2)and 0.25 mAh·cm^(-2),with a significantly reduced overpotential(from 91.8 to 35 mV).With the assistance of the PEDOT protective layer,the PEDOT@Zn//Cu battery maintained approximately 99.5%Coulombic efficiency after 450 ***-situ scanning electron microscopy(SEM)and in situ optical microscopy characterizations further confirmed that the PEDOT protective layer can effectively suppress the growth of zinc ***,the Zn-ion capacitors assembled by the PEDOT@Zn and activated carbon also demonstrated outstanding cycling stability.

关键词： zinc-ion devices zinc anode poly(3 4-ethylenedioxythiophene)(PEDOT) dendrite desolvation process

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Aligned Ion Conduction Pathway of Polyrotaxane‑Based Electrolyte with Dispersed Hydrophobic Chains for Solid‑State Lithium–Oxygen Batteries

引用

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram Kim Myeong‑Chang Sung Gwang‑Hee Lee Byoungjoon Hwang Sojung Seo Ji‑Hun Seo Dong‑Wan Kim department of materials Science and engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea School of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea materials Science and Chemical engineering Center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

“Zero‑Strain” NiNb_(2)O_(6) Fibers for All‑Climate Lithium Storage

引用

Nano-Micro Letters 2025年第1期17卷 348-360页

作者： Yan Zhao Qiang Yuan Liting Yang Guisheng Liang Yifeng Cheng Limin Wu Chunfu Lin Renchao Che College of Physics Donghua UniversityShanghai 201620People’s Republic of China School of materials Science and engineering Institute of Materials for Energy and EnvironmentQingdao UniversityQingdao 266071People’s Republic of China Laboratory of Advanced materials Shanghai Key Laboratory of Molecular Catalysis and Innovative MaterialsAcademy for Engineering&TechnologyFudan UniversityShanghai 200438People’s Republic of China Zhejiang Laboratory Hangzhou 311100People’s Republic of China Inner Mongolia University Hohhot 010021People’s Republic of China

Niobates are promising all-climate Li^(+)-storage anode material due to their fast charge transport,large specific capacities,and resistance to electrolyte ***,their moderate unit-cellvolume expansion(generally 5%–10%)during Li^(+)storage causes unsatisfactory long-term ***,“zero-strain”NiNb_(2)O_(6) fibers are explored as a new anode material with comprehensively good electrochemical *** Li^(+)storage,the expansion of electrochemical inactive NiO_(6) octahedra almost fully offsets the shrinkage of active NbO_(6) octahedra through reversible O *** superior volume-accommodation capability of the NiO_(6) layers guarantees the“zero-strain”behavior of NiNb_(2)O_(6) in a broad temperature range(0.53%//0.51%//0.74%at 25//−10//60℃),leading to the excellent cyclability of the NiNb_(2)O_(6) fibers(92.8%//99.2%//91.1%capacity retention after 1000//2000//1000 cycles at 10C and 25//−10//60℃).This NiNb_(2)O_(6) material further exhibits a large reversible capacity(300//184//318 mAh g−1 at 0.1C and 25//−10//60℃)and outstanding rate performance(10 to 0.5C capacity percentage of 64.3%//50.0%//65.4%at 25//−10//60℃).Therefore,the NiNb_(2)O_(6) fibers are especially suitable for large-capacity,fast-charging,long-life,and all-climate lithium-ion batteries.

关键词： NiNb_(2)O_(6)porous fiber “Zero-strain”mechanism Electrochemical property Harsh-temperature operation Operando characterization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

department of energy and Power engineering,Tsinghua University

引用

Frontiers of physics 2021年第2期16卷 F0003-F0003,220页

作者： Peixue Jiang Zhe Wang Director of department of energy and Power engineering Deputy Director of department of energy and Power engineering

Introduction The department of energy and Power engineering,originally known as the Power group in the department of Mechanical engineering,was established in 1952 under the name of the department of Power System,while the department of Mechanical engineering had been originally established in *** present,for teaching and scientific research,in the department of energy and Power engineering there are five institutes,namely,Institute of energy and Power engineering,Institute of Power Mechanics and engineering,Institute of Thermophysics.

关键词： Power Mechanics originally

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Assessing the corrosion protection property of coatings loaded with corrosion inhibitors using the real-time atmospheric corrosion monitoring technique

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 119-126页

作者： Xiaoxue Wang Lulu Jin Jinke Wang Rongqiao Wang Xiuchun Liu Kai Gao Jingli Sun Yong Yuan Lingwei Ma Hongchang Qian Dawei Zhang School of energy and Power engineering Beihang UniversityBeijing 100191China Beijing Institute of Space Long March Vehicle Beijing 100076China National materials Corrosion and Protection Data Center University of Science and Technology BeijingBeijing 100083China Institute of materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110004China Shanghai Spaceflight Precision Machinery Institute Shanghai 201600China

The atmospheric corrosion monitoring(ACM)technique has been widely employed to track the real-time corrosion behavior of metal ***,limited studies have applied ACM to the corrosion protection properties of organic *** study compared a bare epoxy coating with one containing zinc phosphate corrosion inhibitors,both applied on ACM sensors,to observe their corrosion protection properties over *** with artificial damage via scratches were exposed to immersion and alternating dry and wet environments,which allowed for monitoring galvanic corrosion currents in *** the corrosion tests,the ACM currents of the zinc phosphate/epoxy coating were considerably lower than those of the blank epoxy *** trend in ACM current variations closely matched the results obtained from regular electrochemical tests and surface *** alignment highlights the potential of the ACM technique in evaluating the corrosion protection capabilities of organic *** with the blank epoxy coating,the zinc phosphate/epoxy coating showed much-decreased ACM current values that confirmed the effective inhibition of zinc phosphate against steel corrosion beneath the damaged coating.

关键词： atmospheric corrosion monitoring technology corrosion inhibitor coating carbon steel corrosion protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

引用

Nano-Micro Letters 2025年第1期17卷 507-527页

作者： Zhiqiang Guo Di Lan Zirui Jia Zhenguo Gao Xuetao Shi Mukun He Hua Guo Guanglei Wu Pengfei Yin College of Science Sichuan Agricultural UniversityYa’an 625014People’s Republic of China School of materials Science and engineering Hubei University of Automotive TechnologyShiyan 442002People’s Republic of China Institute of materials for energy and Environment State Key Laboratory of Bio‑Fibers and Eco‑TextilesCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071People’s Republic of China Shaanxi Key Laboratory of Macromolecular Science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’anShaanxi 710072People’s Republic of China

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly ***-component interface engineering is considered an effective means to achieve high-efficiency EMW ***,interface modulation engineering has not been fully discussed and has great potential in the field of EMW *** this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal *** utilizing the different properties of different substances,rich heterogeneous interfaces are *** effectively promotes charge transfer and enhances interfacial polarization and conduction *** prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy *** minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 ***,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel ***,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

关键词： Electrostatic spinning Component regulation Heterogeneous interfaces Electromagnetic wave absorption Corrosion protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sulfolane‑Based Flame‑Retardant Electrolyte for High‑Voltage Sodium‑Ion Batteries

引用

Nano-Micro Letters 2025年第2期17卷 498-516页

作者： Xuanlong He Jie Peng Qingyun Lin Meng Li Weibin Chen Pei Liu Tao Huang Zhencheng Huang Yuying Liu Jiaojiao Deng Shenghua Ye Xuming Yang Xiangzhong Ren Xiaoping Ouyang Jianhong Liu Biwei Xiao Jiangtao Hu Qianling Zhang Graphene Composite Research Center College of Chemistry and Environmental EngineeringShenzhen UniversityShenzhen 518060People’s Republic of China Center of Electron Microscopy State Key Laboratory of Silicon and Advanced Semiconductor MaterialsSchool of Materials Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China GRINM(Guangdong)Research Institute for Advanced materials and Technology FoshanGuangdong 528051People’s Republic of China College of energy engineering Zhejiang UniversityHangzhouZhejiang 310027People’s Republic of China School of materials Science and engineering Xiangtan UniversityXiangtan 411105People’s Republic of China Shenzhen Eigen-Equation Graphene Technology Co.Ltd Shenzhen 518000People’s Republic of China

Sodium-ion batteries hold great promise as next-generation energy storage ***,the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of *** particular,an unstable cathode–electrolyte interphase(CEI)leads to successive electrolyte side reactions,transition metal leaching and rapid capacity decay,which tends to be exacerbated under high-voltage ***,constructing dense and stable CEIs are crucial for high-performance *** work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H,1H,5H-octafluoropentyl-1,1,2,2-tetrafluoroethyl ether,which exhibited excellent oxidative stability and was able to form thin,dense and homogeneous *** excellent CEI enabled the O3-type layered oxide cathode NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)(NaNMF)to achieve stable cycling,with a capacity retention of 79.48%after 300 cycles at 1 C and 81.15%after 400 cycles at 2 C with a high charging voltage of 4.2 *** addition,its nonflammable nature enhances the safety of *** work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.

关键词： Sodium-ion batteries Sulfolane-based electrolyte High voltage Layered oxide cathode Flame retardant

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Gradient‑Layered MXene/Hollow Lignin Nanospheres Architecture Design for Flexible and Stretchable Supercapacitors

引用

Nano-Micro Letters 2025年第2期17卷 447-462页

作者： Haonan Zhang Cheng Hao Tongtong Fu Dian Yu Jane Howe Kaiwen Chen Ning Yan Hao Ren Huamin Zhai Jiangsu Provincial Key Lab of Sustainable Pulp and Paper Technology and Biomass materials NanJing Forestry UniversityNanjing 210037People’s Republic of China department of Chemical engineering and Applied Chemistry University of Toronto200 College StreetTorontoON M5S 3E5Canada department of materials Science and engineering University of Toronto184 College StreetTorontoON M5S 3E4Canada College of materials Science and engineering Nanjing Forestry UniversityNanjing 210037People’s Republic of China

With the rapid development of flexible wearable electronics,the demand for stretchable energy storage devices has *** this work,a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres(HLNPs)-intercalated two-dimensional transition metal carbide(Ti_(3)C_(2)T_(x) MXene)for fabricating highly stretchable and durable *** depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient,a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene ***,the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility,thus better utilizing the pseudocapacitive property of *** these strategies effectively enhanced the capacitive performance of the *** addition,HLNPs,which acted as a protective phase for MXene layer,enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the *** electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600%uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm^(−2)(241 F g^(−1))and 514 mF cm^(−2)(95 F g^(−1)),***,their capacitances were well preserved after 1000 times of 600%stretch-release *** study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.

关键词： Hollow lignin nanospheres MXene Gradient-layered architecture Wrinkled electrodes Stretchable supercapacitors

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Molecule‑Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery

引用

Nano-Micro Letters 2025年第1期17卷 404-423页

作者： Qiqi Sun Zelong Gong Tao Zhang Jiafeng Li Xianli Zhu Ruixiao Zhu Lingxu Wang Leyuan Ma Xuehui Li Miaofa Yuan Zhiwei Zhang Luyuan Zhang Zhao Qian Longwei Yin Rajeev Ahuja Chengxiang Wang Key Laboratory for Liquid‑Solid Structural Evolution and Processing of materials(Ministry of Education) School of Materials Science and EngineeringShandong UniversityJinan 250061People’s Republic of China Condensed Matter Theory Department of Physics and AstronomyUppsala UniversityUppsala 75120Sweden

The risk of flammability is an unavoidable issue for gel polymer electrolytes(GPEs).Usually,flameretardant solvents are necessary to be used,but most of them would react with anode/cathode easily and cause serious interfacial instability,which is a big challenge for design and application of nonflammable ***,a nonflammable GPE(SGPE)is developed by in situ polymerizing trifluoroethyl methacrylate(TFMA)monomers with flame-retardant triethyl phosphate(TEP)solvents and LiTFSI–LiDFOB dual lithium *** is strongly anchored to PTFMA matrix via polarity interaction between-P=O and-CH_(2)CF_(3).It reduces free TEP molecules,which obviously mitigates interfacial reactions,and enhances flame-retardant performance of TEP *** TEP molecules are also inhibited in solvation of Li^(+),leading to anion-dominated solvation sheath,which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface *** coordination structure changes Li^(+)transport from sluggish vehicular to fast structural transport,raising ionic conductivity to 1.03 mS cm^(-1) and transfer number to 0.41 at 30℃.The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm^(−2),and 4.2 V LiCoO_(2)|SGPE|Li battery delivers high average specific capacity>120 mAh g^(−1) over 200 *** study paves a new way to make nonflammable GPE that is compatible with Li metal anode.

关键词： Anchoring effect Nonflammable gel electrolyte In situ cross-linked Electrode-electrolyte interface Li metal battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

通过受控晶体应变揭示PtCo双金属固体溶液中增强的氧还原活性（英文）

引用

Science China materials 2025年第01期 180-188页

作者：贺宁吴胜强俞文松金方润谢文俊鲁欣欣赵晓续陈仲欣涂文广唐叔贤 School of Science and engineering The Chinese University of Hong Kong School of materials Science and engineering Peking University School of materials Science and engineering Huaqiao University Petro China Shenzhen New energy Research Institute Institute of materials Science and Devices Suzhou University of Science and Technology

开发用于氧还原反应（ORR）的低成本、高活性铂（Pt）基电催化剂对于燃料电池的广泛应用至关重要.一种有效的方法在于将Pt与非贵过渡金属合金化,以调节Pt表面的物理化学状态.然而,由于合金化过程中成分、晶体类型和表面结构的复杂性,在...

开发用于氧还原反应（ORR）的低成本、高活性铂（Pt）基电催化剂对于燃料电池的广泛应用至关重要.一种有效的方法在于将Pt与非贵过渡金属合金化,以调节Pt表面的物理化学状态.然而,由于合金化过程中成分、晶体类型和表面结构的复杂性,在理解结构-性能关系方面仍然存在巨大挑战.在本研究中,我们使用液相合成方法合成了一系列不同比例的PtCo双金属固溶体.通过利用固溶体的特性,所得的PtCo双金属合金保持了面心立方晶体结构,最大限度地减少了合金化过程中引入的复杂性,有利于活性机理分析.此外,在受控合金成分和晶体结构下,我们研究了氧还原反应的电催化活性对铂催化剂表面应变的依赖性.据此设计的S-PtCo-SNPs阴极赋予了质子交换膜燃料电池（PEMFC）(2.08 W cm-2,4 A cm-2)和锌-空气电池（ZAB）(143.1m W cm-2,214.5m A cm-2)出色的性能.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：