检索结果-南通市图书馆

3D-printed Mg-1Ca/polycaprolactone composite scaffolds with promoted bone regeneration

Journal of Magnesium and Alloys 2024年第3期12卷 966-979页

作者： Xiao Zhao Siyi Wang Feilong Wang Yuan Zhu Ranli Gu Fan Yang Yongxiang Xu Dandan Xia Yunsong Liu department of Prosthodontics Peking University School and Hospital of StomatologyBeijing 100081China National center of Stomatology National Engineering Laboratory for Digital and Material Technology of StomatologyNational Clinical Research Center for Oral DiseasesBeijing Key Laboratory of Digital StomatologyResearch Center of Engineering and Technology for Computerized Dentistry Ministry of HealthNMPA Key Laboratory for Dental MaterialsBeijing 100081China department of dental materials Peking University School and Hospital of StomatologyBeijing 100081China

In bone tissue engineering,polycaprolactone(PCL)is a promising material with good biocompatibility,but its poor degradation rate,mechanical strength,and osteogenic properties limit its application.In this study,we developed an Mg-1Ca/polycaprolactone(Mg-1Ca/PCL)composite scaffolds to overcome these limitations.We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5,10,and 20 wt%.Porous scaffolds with controlled macro-and microstructure were printed using the fused deposition modeling method.We explored the mechanical strength,biocompatibility,osteogenesis performance,and molecular mechanism of the Mg-1Ca/PCL composites.The 5 and 10 wt%Mg-1Ca/PCL composites were found to have good biocompatibility.Moreover,they promoted the mechanical strength,proliferation,adhesion,and osteogenic differentiation of human bone marrow stem cells(hBMSCs)of pure PCL.In vitro degradation experiments revealed that the composite material stably released Mg_(2)+ions for a long period;it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth.Microcomputed tomography and histological analysis showed that both 5 and 10 wt%Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects.Our results indicated that the Wnt/β-catenin pathway was involved in the osteogenic effect.Therefore,Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application.Statement of significance:Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects.However,there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds.This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities.Furthermore,the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold.The obtained porou

关键词： 3D printing Bone tissue engineering Magnesium Osteogenic Polycaprolactone Scaffold.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bioinspired polysaccharide-based nanocomposite membranes with robust wet mechanical properties for guided bone regeneration

引用

National Science Review 2024年第3期11卷 215-226页

作者： Jian-Hong Xiao Zhen-Bang Zhang JiaHao Li Si-Ming Chen Huai-Ling Gao YinXiu Liao Lu Chen ZiShuo Wang YiFan Lu YuanZhen Hou HengAn Wu DuoHong Zou Shu-Hong Yu department of Chemistry New Cornerstone Science Laboratory Institute of Biomimetic Materials&Chemistry Anhui Engineering Laboratory of Biomimetic MaterialsDivision of Nanomaterials&Chemistry Hefei National Research Center for Physical Sciences at the Microscale University of Science and Technology of China department of dental Implant center Stomatologic Hospital and College Key Laboratory of Oral Diseases Research of Anhui Province Anhui Medical University CAS Key Laboratory of Mechanical Behavior and Design of materials Department of Modern Mechanics CAS Center for Excellence in Complex System Mechanics University of Science and Technology of China department of Oral Surgery College of Stomatology National Clinical Research Center for Oral DiseasesShanghai Key Laboratory of Stomatology Shanghai Research Institute of Stomatology Shanghai Ninth People's Hospital Affiliated to Shanghai Jiao Tong University School of Medicine Institute of Innovative materials(I2M) Department of Chemistry Department of Materials Science and Engineering Southern University of Science and Technology

Polysaccharide-based membranes with excellent mechanical properties are highly desired. However, severe mechanical deterioration under wet conditions limits their biomedical applications. Here, inspired by the structural heterogeneity of strong yet hydrated biological materials, we propose a strategy based on heterogeneous crosslink-and-hydration（HCH） of a molecule/nano dual-scale network to fabricate polysaccharide-based nanocomposites with robust wet mechanical properties. The heterogeneity lies in that the crosslink-and-hydration occurs in the molecule-network while the stress-bearing nanofiber-network remains unaffected. As one demonstration, a membrane assembled by bacterial cellulose nanofiber-network and Ca2+-crosslinked and hydrated sodium alginate molecule-network is designed. Studies show that the crosslinked-and-hydrated molecule-network restricts water invasion and boosts stress transfer of the nanofiber-network by serving as interfibrous bridge. Overall, the molecule-network makes the membrane hydrated and flexible; the nanofiber-network as stress-bearing component provides strength and toughness.The HCH dual-scale network featuring a cooperative effect stimulates the design of advanced biomaterials applied under wet conditions such as guided bone regeneration membranes.

关键词： bioinspiration heterogeneous crosslink-and-hydration dual-scale network nanocomposite membrane wet mechanical properties guided bone regeneration

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Comparative analysis of unipolar and bipolar plasma electrolytic oxidation coatings on Al-Mg laminated macro composites

引用

Transactions of Nonferrous Metals Society of China 2024年

作者： Mohsen RASTEGARI Masoud ATAPOUR Aboozar TAHERIZADEH Amin HAKIMIZAD Maryam RAHMATI department of materials Engineering Isfahan University of Technology Yekta Mobaddel Pars Co. Science and Technology Campus Yazd University dental materials Research center dental Research Institute School of Dentistry Isfahan University of Medical Sciences

Al-Mg laminated macro composites （LMC） have garnered attention due to their excellent mechanical properties and low density. However， their weak corrosion resistance has limited their industrial applications. Plasma electrolytic oxidation （PEO） has been explored as a potential solution to this issue by producing hard and thick oxide coatings on the surface of Al-Mg LMCs manufactured through hot extrusion bonding. In this study， PEO coatings were prepared on Al-Mg LMCs using both unipolar and bipolar waveforms in an appropriate electrolyte for both aluminum and magnesium alloys. The techniques of FESEM/EDX， GIXRD， and electrochemical methods of Potentiodynamic polarization and EIS were carried out. The results revealed that the coatings produced using the bipolar waveform exhibited lower porosity and higher thickness than those produced using the unipolar one. The corrosion performance of the specimens' cut edge was investigated using electrochemical impedance spectroscopy （EIS） after 1， 8， and 12 hours of immersion in a 3.5%wt. NaCl solution. It was observed that the coating produced using the bipolar waveform demonstrated the highest corrosion resistance after 12 hours of immersion， with an estimated corrosion resistance of 41.87 kΩ.cm2， which was approximately three times higher than that of the unipolar coating. Notably， no signs of galvanic corrosion were observed in the LMC， and only minor corrosion attacks were observed on the magnesium layer in some areas.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Negative enthalpy alloys and local chemical ordering:a concept and route leading to synergy of strength and ductility

引用

National Science Review 2024年第4期11卷 172-184页

作者： Zibing An Tao Yang Caijuan Shi Shengcheng Mao Lihua Wang Ang Li Wei Li Xianmeng Xue Ming Sun Yifan Bai Yapeng He Fuzeng Ren Zhouguang Lu Ming Yan Yang Ren Chain-Tsuan Liu Ze Zhang Xiaodong Han Beijing Key Lab of Microstructure and Property of Advanced materials College of Materials Science &Engineering Beijing University of Technology department of materials Science and Engineering City University of Hong Kong Key Laboratory of Partial Acceleration Physics& Technology Institute of High Energy PhysicsChinese Academy of Sciences department of materials Science &Engineering Southern University of Science and Technology department of Physics City University of Hong Kong State Key Laboratory of Silicon materials Department of Materials Science and Engineering Zhejiang University

Solid solutions are ubiquitous in metals and alloys. Local chemical ordering(LCO) is a fundamental sub-nano/nanoscale process that occurs in many solid solutions and can be used as a microstructure to optimize strength and ductility. However, the formation of LCO has not been fully elucidated, let alone how to provide efficient routes for designing LCO to achieve synergistic effects on both superb strength and ductility. Herein, we propose the formation and control of LCO in negative enthalpy alloys. With engineering negative enthalpy in solid solutions, genetic LCO components are formed in negative enthalpy refractory high-entropy alloys(RHEAs). In contrast to conventional ‘trial-and-error' approaches, the control of LCO by using engineering negative enthalpy in RHEAs is instructive and results in superior strength(1160 MPa) and uniform ductility(24.5%) under tension at ambient temperature, which are among the best reported so far. LCO can promote dislocation cross-slip, enhancing the interaction between dislocations and their accumulation at large tensile strains; sustainable strain hardening can thereby be attained to ensure high ductility of the alloy. This work paves the way for new research fields on negative enthalpy solid solutions and alloys for the synergy of strength and ductility as well as new functions.

关键词： negative enthalpy alloys local chemical ordering strength ductility dislocation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Recent Advances in Asymmetric Structural Composites for Excellent Electromagnetic Interference Shielding: A Review

引用

Chinese Journal of Polymer Science 2024年第6期42卷 693-710页

作者： Ying Zhou Bai Xue Lan Xie Chang-Mei Wu Qiang Zheng department of Polymer materials and Engineering College of Materials and Metallurgy Guizhou University National Engineering Research center for Compounding and Modification of Polymer materials National and Local Joint Engineering Research Center for Functional Polymer Membrane Materials and Membrane Processes State Key Laboratory of Public Big Data Guizhou University department of Polymer Science and Engineering Zhejiang University

Since electromagnetic pollution is detrimental to human health and the environment, numerous efforts have been successively made to achieve excellent electromagnetic interference shielding effectiveness(EMI SE) via designing the hierarchical structures for electromagnetic interference(EMI) shielding polymer composites. Among the plentiful structures, the asymmetric structures are currently a hot spot, principally categorizing into multi-layered, porous, fibrous, and segregated asymmetric structures, which endows the high EMI shielding performance for polymer composites incorporated with magnetic, conductive, and/or dielectric micro/nano-fillers, due to the “absorption-reflection-reabsorption” shielding mechanism. Therefore, this review provides the retrospection and summary of the efforts with respect to abundant asymmetric structures and multifunctional micro/nano-fillers for enhancing EMI shielding properties, which is conducive to the booming development of polymeric EMI shielding materials for the promising prospect in modern electronics and 5-generation(5G) technology.

关键词： Asymmetric structure Microano functional filler Polymer composite Electromagnetic interference shielding

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Integrated ribosome and proteome analyses reveal insights into sevoflurane-induced long-term social behavior and cognitive dysfunctions through ADNP inhibition in neonatal mice

引用

Zoological Research 2024年第3期45卷 663-678页

作者： Li-Rong Liang Bing Liu Shu-Hui Cao You-Yi Zhao Tian Zeng Mei-Ting Zhai Ze Fan Dan-Yi He San-Xin Ma Xiao-Tong Shi Yao Zhang Hui Zhang State Key Laboratory of Oral&Maxillofacial Reconstruction and Regeneration National Clinical Research Center for Oral DiseasesShaanxi Engineering Research Center for Dental Materials and Advanced ManufactureDepartment of AnesthesiologySchool of StomatologyAir Force Medical UniversityXi’anShaanxi 710032China department of Anesthesiology 986th Air Force HospitalAir Force Medical UniversityXi’anShaanxi 710032China

A growing number of studies have demonstrated that repeated exposure to sevoflurane during development results in persistent social abnormalities and cognitive impairment.Davunetide,an active fragment of the activity-dependent neuroprotective protein(ADNP),has been implicated in social and cognitive protection.However,the potential of davunetide to attenuate social deficits following sevoflurane exposure and the underlying developmental mechanisms remain poorly understood.In this study,ribosome and proteome profiles were analyzed to investigate the molecular basis of sevoflurane-induced social deficits in neonatal mice.The neuropathological basis was also explored using Golgi staining,morphological analysis,western blotting,electrophysiological analysis,and behavioral analysis.Results indicated that ADNP was significantly down-regulated following developmental exposure to sevoflurane.In adulthood,anterior cingulate cortex(ACC)neurons exposed to sevoflurane exhibited a decrease in dendrite number,total dendrite length,and spine density.Furthermore,the expression levels of Homer,PSD95,synaptophysin,and vglut2 were significantly reduced in the sevoflurane group.Patch-clamp recordings indicated reductions in both the frequency and amplitude of miniature excitatory postsynaptic currents(mEPSCs).Notably,davunetide significantly ameliorated the synaptic defects,social behavior deficits,and cognitive impairments induced by sevoflurane.Mechanistic analysis revealed that loss of ADNP led to dysregulation of Ca^(2+)activity via the Wnt/β-catenin signaling,resulting in decreased expression of synaptic proteins.Suppression of Wnt signaling was restored in the davunetide-treated group.Thus,ADNP was identified as a promising therapeutic target for the prevention and treatment of neurodevelopmental toxicity caused by general anesthetics.This study provides important insights into the mechanisms underlying social and cognitive disturbances caused by sevoflurane exposure in neonatal mice and elucidates the regulatory pathways invo

关键词： Davunetide Sevoflurane Abnormal social behaviors ADNP Neurotoxicity

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ultra-high-temperature application of MXene: Stabilization of 2D Ti_(3)C_(2)T_(x) for cross-scale strengthening and toughening of 3D TiC

引用

Journal of Advanced Ceramics 2024年第1期13卷 1-10页

作者： Lu Liu Guobing Ying Quanguo Jiang Dong Wen Peng Wang Meng Wu Ziying Ji Yongting Zheng Xiang Wang department of materials Science and Engineering College of Mechanics and MaterialsHohai UniversityNanjing 211100China Key Laboratory of Superlight materials&Surface Technology Ministry of EducationHarbin Engineering UniversityHarbin 150001China Shenzhen Key Laboratory for Advanced materials School of Materials Science and EngineeringHarbin Institute of Technology(Shenzhen)Shenzhen 518055China center for Composite materials and Structures Harbin Institute of TechnologyHarbin 150001China

Transition metal carbide/nitride cores within MXenes make them considerably useful for ultra-high-temperature reinforcement.However,extensive research on Ti_(3)C_(2)T_(x) MXene has revealed its tendency to undergo a phase transition to TiCy at temperatures above 800℃due to high activity of a superficial Ti atomic layer.Herein,spark plasma sintering of Ti_(3)C_(2)T_(x) and TiC is performed to prevent the Ti_(3)C_(2)T_(x) phase transition at temperatures up to 1900℃through the fabrication of composites at a pressure of 50 MPa.Using a focused ion beam scanning electron microscope to separate layered substances in the composites and examining selected area diffraction spots in a transmission electron microscope enabled identification of non-phase-transitioned MXene.First-principles calculations based on density functional theory indicated the formation of strong chemical bonding interfaces between Ti_(3)C_(2)T_(x) and TiC,which imposed a stability constraint on the Ti atomic layer at the Ti_(3)C_(2)T_(x) surface.Mechanical performance tests,such as three-point bending and fracture toughness analysis,demonstrated that the addition of Ti_(3)C_(2)T_(x) can effectively improve the cross-scale strengthening and toughening of the TiC matrix,providing a new path for designing and developing two-dimensional(2D)carbides cross-scale-enhanced three-dimensional(3D)carbides with the same elements relying on a wide variety of MXenes.

关键词： MXene ultra-high-temperature phase stability interface bonding cross-scale strengthening and toughening structural ceramic composites

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Metal–Organic Gel Leading to Customized Magnetic‑Coupling Engineering in Carbon Aerogels for Excellent Radar Stealth and Thermal Insulation Performances

引用

Nano-Micro Letters 2024年第3期16卷 36-52页

作者： Xin Li Ruizhe Hu Zhiqiang Xiong Dan Wang Zhixia Zhang Chongbo Liu Xiaojun Zeng Dezhi Chen Renchao Che Xuliang Nie Key Laboratory of Jiangxi Province for Persistent Pollutants Control and Resources Recycle Nanchang Hangkong UniversityNanchang 330063People’s Republic of China School of Environmental and Chemical Engineering Nanchang Hangkong UniversityNanchang 330063People’s Republic of China Laboratory of Advanced materials Department of Materials Science and Collaborative Innovation Center of Chemistry for Energy Materials and Collaborative Innovation Center of Chemistry for Energy MaterialsFudan UniversityShanghai 200438People’s Republic of China School of materials Science and Engineering Jingdezhen Ceramic UniversityJingdezhen 333403People’s Republic of China College of Chemistry and materials Jiangxi Agricultural UniversityNanchang 330045People’s Republic of China

Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic hydrogels are prepared by regulating the complexation effect,solution polarity and curing speed.Meanwhile,collagen peptide is used to facilitate the fabrication of a porous aerogel with excellent physical properties as well as the homogeneous dispersion of magnetic particles during calcination.Subsequently,two kinds of heterometallic magnetic coupling systems are obtained through the application of Kirkendall effect.FeCo/nitrogen-doped carbon(NC)aerogel demonstrates an ultra-strong microwave absorption of−85 dB at an ultra-low loading of 5%.After reducing the time taken by atom shifting,a FeCo/Fe3O4/NC aerogel containing virus-shaped particles is obtained,which achieves an ultra-broad absorption of 7.44 GHz at an ultra-thin thickness of 1.59 mm due to the coupling effect offered by dual-soft-magnetic particles.Furthermore,both aerogels show excellent thermal insulation property,and their outstanding radar stealth performances in J-20 aircraft are confirmed by computer simulation technology.The formation mechanism of MOG is also discussed along with the thermal insulation and electromagnetic wave absorption mechanism of the aerogels,which will enable the development and application of novel and lightweight stealth coatings.

关键词： Metal-organic gels Heterometallic magnetic coupling Radar stealth Thermal insulation Computer simulation technology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surface-functionalized hole-selective monolayer for high efficiency single-junction wide-bandgap and monolithic tandem perovskite solar cells

引用

Journal of Energy Chemistry 2024年第1期88卷 317-326,I0008页

作者： Devthade Vidyasagar Yeonghun Yun Jae Yu Cho Hyemin Lee Kyung Won Kim Yong Tae Kim Sung Woong Yang Jina Jung Won Chang Choi Seonu Kim Rajendra Kumar Gunasekaran Seok Beom Kang Kwang Heo Dong Hoe Kim Jaeyeong Heo Sangwook Lee School of materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea department of materials Science and Engineering and Optoelectronics Convergence Research CenterChonnam National UniversityGwangju 61186Republic of Korea department of materials Science and Engineering Korea UniversitySeoul 02841Republic of Korea department of Nanotechnology and Advanced materials Engineering Sejong UniversitySeoul 05006Republic of Korea

Carbazole moiety-based 2PACz([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)self-assembled monolayers(SAMs)are excellent hole-selective contact(HSC)materials with abilities to excel the charge-transferdynamics of perovskite solar cells(PSCs).Herein,we report a facile but powerful method to functionalize the surface of 2PACz-SAM,by which reproducible,highly stable,high-efficiency wide-bandgap PSCs can be obtained.The 2PACz surface treatment with various donor number solvents improves assembly of 2PACz-SAM and leave residual surface-bound solvent molecules on 2PACz-SAM,which increases perovskite grain size,retards halide segregation,and accelerates hole extraction.The surface functionalization achieves a high power conversion efficiency(PCE)of 17.62%for a single-junction wide-bandgap(~1.77 e V)PSC.We also demonstrate a monolithic all-perovskite tandem solar cell using surfaceengineered HSC,showing high PCE of 24.66%with large open-circuit voltage of 2.008 V and high fillfactor of 81.45%.Our results suggest this simple approach can further improve the tandem device,when coupled with a high-performance narrow-bandgap sub-cell.

关键词： Perovskite solar cells 2PACz Monolithic tandem solar cells Wide bandgap

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Impact of device resistances in the performance of graphene‑based terahertz photodetectors

引用

Frontiers of Optoelectronics 2024年第2期17卷 87-97页

作者： O.Castelló Sofía M.López Baptista K.Watanabe T.Taniguchi E.Diez J.E.Velázquez-Pérez Y.M.Meziani J.M.Caridad J.A.Delgado-Notario department of Applied Physics University of Salamanca37008 SalamancaSpain Unidad de Excelencia en Luz y Materia Estructurada(LUMES) University of Salamanca37008 SalamancaSpain Research center for Electronic and Optical materials National Institute for Materials Science1-1 NamikiTsukuba 305-0044Japan Research center for materials Nanoarchitectonics National Institute for Materials Science1-1 NamikiTsukuba 305-0044Japan Nanotechnology Group USAL-NanolabUniversity of Salamanca37008 SalamancaSpain

In recent years,graphene field-effect-transistors(GFETs)have demonstrated an outstanding potential for terahertz(THz)photodetection due to their fast response and high-sensitivity.Such features are essential to enable emerging THz applications,including 6G wireless communications,quantum information,bioimaging and security.However,the overall performance of these photodetectors may be utterly compromised by the impact of internal resistances presented in the device,so-called access or parasitic resistances.In this work,we provide a detailed study of the influence of internal device resistances in the photoresponse of high-mobility dual-gate GFET detectors.Such dual-gate architectures allow us to fine tune(decrease)the internal resistance of the device by an order of magnitude and consequently demonstrate an improved responsivity and noise-equivalent-power values of the photodetector,respectively.Our results can be well understood by a series resistance model,as shown by the excellent agreement found between the experimental data and theoretical calculations.These findings are therefore relevant to understand and improve the overall performance of existing high-mobility graphene photodetectors.

关键词： Graphene THz Photodetector Field-effect transistor Plasmonic

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：