检索结果-南通市图书馆

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won department of chemical and Biological engineering Korea University department of chemical engineering (Integrated process) Kyung Hee University department of chemical engineering and materials Science Ewha Womans University department of chemical engineering Pukyong National University Resources engineering Plant Research department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Biorefinery Carbon mitigation Climate change Global warming Lignin utilization Bioeconomy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He department of materials Science and engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology department of chemical Sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Nickle oxide Magnetron sputter Defect Stability Perovskite solar cell

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

引用

Journal of Energy Chemistry 2025年第1期100卷 702-709页

作者： Yiman Gu Yanchao Zhang Zhanyu Li Yijia Lei Baozeng Sun Xiaoyu Yu Zhe Wang College of Chemistry and Life Science Changchun University of Technology College of chemical engineering Changchun University of Technology School of materials Science and engineering Changchun University of Technology Key Laboratory of Advanced Functional Polymer Membrane materials of Jilin Province

The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes （AEMs） has been widely ***,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains *** strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being ***,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone （x=40,50,and 60） into the main chain of poly（p-terphenylene isatin）.Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation *** results show that PTI-PTF50-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of *** has an ionic conductivity of 133.83 mS cm-1at 80°*** addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of *** cell polarization curve based on PTI-PTF50-NOH shows a power density of 734.76 mW cm-2at a current density of 1807.7 mA cm-2.

关键词： Anion exchange membranes Poly(p-terphenylene isatin) Hydrophilic-hydrophobic phase separation Fluorinated group

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ru doping triggering reconstruction of cobalt phosphide for coupling glycerol electrooxidation with seawater electrolysis

引用

Journal of Energy Chemistry 2025年第1期100卷 317-326页

作者： Binglu Deng Jie Shen Jinxing Lu Chuqiang Huang Zhuoyuan Chen Feng Peng Yunpeng Liu School of materials Science and Hydrogen Energy Foshan University School of Chemistry and chemical engineering Guangzhou University Guangdong Key Laboratory for Hydrogen Energy Technologies

Seawater electrolysis is a promising approach for sustainable energy without relying on precious ***,the large-scale seawater electrolysis is hindered by low catalytic efficiency and severe anode corrosion caused by the harmful *** contrast to the oxygen evolution reaction （OER）and chlorin ion oxidation reaction （ClOR）,glycerol oxidation reaction （GOR） is more thermodynamically and kinetically favorable ***,a Ru doping cobalt phosphide （Ru-CoP2） is proposed as a robust bifunctional electrocatalyst for seawater electrolysis and GOR,for the concurrent productions of hydrogen and value-added *** in situ and ex situ characterization analyses demonstrated that Ru doping featured in the dynamic reconstruction process from Ru-CoP2to Ru-CoOOH,accounting for the superior GOR *** coupling GOR with hydrogen evolution was realized by employing Ru-CoP2as both anode and cathode,requiring only a low voltage of 1.43 V at 100 mA cm-2,which was 250 m V lower than that in alkaline *** work guides the design of bifunctional electrocatalysts for energy-efficient seawater electrolysis coupled with biomass resource upcycling.

关键词： Glycerol electrooxidation Hydrogen evolution Ru doping Cobalt phosphide Bifunctional electrocatalysts

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High-temperature-tolerant flexible supercapacitors: Gel polymer electrolytes and electrode materials

引用

Journal of Energy Chemistry 2025年第1期100卷 426-457页

作者： Chong Peng Xinyi Huang Mingwei Zhao Shuling Liao Quanhong Yang Nianjun Yang Siyu Yu School of Chemistry & chemical engineering Southwest University Nanoyang Group Tianjin Key Laboratory of Advanced Carbon and Electrochemical Energy Storage School of Chemical Engineering and Technology and Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) Tianjin University department of Chemistry & IMO-IMOMEC Hasselt University

The development of flexible supercapacitors(FSCs) capable of operating at high temperatures is crucial for expanding the application areas and operating conditions of supercapacitors. Gel polymer electrolytes and electrode materials stand as two key components that significantly impact the efficacy of hightemperature-tolerant FSCs(HT-FSCs). They should not only exhibit high electrochemical performance and excellent flexibility, but also withstand intense thermal stress. Considerable efforts have been devoted to enhancing their thermal stability while maintaining high electrochemical and mechanical performance. In this review, the fundamentals of HT-FSCs are outlined. A comprehensive overview of state-of-the-art progress and achievements in HT-FSCs, with a focus on thermally stable gel polymer electrolytes and electrode materials is provided. Finally, challenges and future perspectives regarding HT-FSCs are discussed, alongside strategies for elevating operational temperatures and *** review offers both theoretical foundations and practical guidelines for designing and manufacturing HT-FSCs, further promoting their widespread adoption across diverse fields.

关键词： Flexible supercapacitors High-temperature tolerance Gel polymer electrolytes Electrode materials

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A New Process for Titanium Aluminides Production from TiO_2

引用

Journal of materials Science & Technology 2007年第3期23卷 367-372页

作者： A.R.Kamali H.Razavizadeh S.M.M.Hadavi department of materials and Metallurgy engineering IUST university department of chemical and materials engineering maleke ashtar university

This paper describes a new process for producing titanium aluminides, in particular TiAl, from TiO2 raw material. On the basis of obtained results, the non-completed reaction of TiO2 with Al and Ca in a special reaction vessel results in the production of granulates of titanium aluminides especially Ti3Al and other Ti- Al phases as the metallic product and Ca12Al14O33 as the non-metallic product. By adding KClO4 in the mixture, a nearly completed reaction can be carried out. The products of this reaction are titanium aluminide particularly TiAl as the metallic part and CaAl4O7 （grossite） as the non-metallic slag part. Both product and slag are produced in a separated form. This process, called KRH-method is described in this article. The scanning electron microscopic microstructure of metallic part of the product shows different phases： the matrix phase is TiAI, where the needle form precipitation is TiAl2 and the plate form precipitation includes TiAI and Ti3Al phases. The microstructure of the remelted metallic part indicates dendritic phase with a lamellar structure comprising of TiAl and Ti3Al phases. The interdendritic phase of TiAI is also seen.

关键词： Titanium aluminide Titanium dioxide Grossite KRH process

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of soaking time in deep cryogenic treatment on the microstructure and mechanical properties of low-alloy medium-carbon HY-TUF steel

引用

International Journal of Minerals,Metallurgy and materials 2016年第6期23卷 658-666页

作者： Ahmad Zare S.R.Hosseini department of materials engineering Maleke-ashtar University of Technology

The influence of soaking time in deep cryogenic treatment on the tensile and impact properties of low-alloy medium-carbon HY-TUF steel was investigated in this study. Microstructural studies based on phase distribution mapping by electron backscatter diffraction show that the deep cryogenic process causes a decrease in the content of retained austenite and an increase in the volume fraction of η-carbide with increasing soaking time up to 48 h. The decrease in the content of retained austenite from ~1.23vol% to 0.48vol% suggests an isothermal martensitic transformation at 77 K. The η-type precipitates formed in deep cryogenic-treated martensite over 48 h have the Hirotsu and Nagakura orientation relation with the martensitic matrix. Furthermore, a high coherency between η-carbide and the martensitic matrix is observed by high-resolution transmission electron microscopy. The variations in macrohardness, yield strength, ultimate tensile strength, and ductility with soaking time in the deep cryogenic process show a peak/plateau trend.

关键词： low alloy steel medium carbon steel cryogenic treatment microstructure mechanical properties fractography

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synergistic effect of bonding heterogeneity and phonon localization in introducing excellent thermoelectric properties in layered heteroanionic NdZnSbO material

引用

Journal of Energy Chemistry 2025年第1期100卷 259-272页

作者： Da Wan Shuwei Tang Shulin Bai Xiaodong Li Peng Ai Wanrong Guo Tuo Zheng College of materials Science and engineering Liaoning Technical University Faculty of Chemistry Northeast Normal University

Layered rare-earth metal oxides, harnessing the dual properties of oxides and two-dimensional layered materials, exhibit remarkable thermal stability and quantum confinement effects. Therefore, this work adopts the first-principles calculation combined with the Boltzmann transport theory to predict the thermoelectric properties of NdZnSbO compound. The coexistence of weak interlayer van der Waals interactions, robust intralayer ionic bonding, and partial covalent bonding leads to remarkable bonding heterogeneity, which engenders pronounced phonon scattering and imposes constraints on thermal transport along the out-of-plane direction. The weakened chemical bonds induced by the antibonding states, together with the rattling-like behavior of the Zn atom, culminate in the profound anharmonicity in the layered NdZnSbO compound. The weakening bond and heavy element contribute to the softness of phonon modes, which significantly diminishes the phonon group velocity. The redistribution-dominated four-phonon scattering process spans a large optical gap, which effectively reduces the lattice thermal conductivity. The NdZnSbO compound exhibits direct semiconductor characteristic with a bandgap of 0.73 e V by adopting the Heyd-Scuseria-Ernzerhof(HSE06) functional in combination with spin–orbit coupling(SOC) effect. The multi-valley feature of NdZnSbO compound augur favorably for band degeneracy, thus amplifying the power factor. Consequently, an optimal figure-of-merit(ZT) of 3.40 at 900 K is achieved for the n-type NdZnSbO compound. The present study delves deeply insights into the origins for the low thermal conductivity of NdZnSbO compound and proposes an optimization scheme to enhance overall thermoelectric performance.

关键词： Bond strength (chemical)

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Facile synthesis of hybridized Co/Fe-ZIF under solvent-free conditions for efficient oxidation evolution reaction electrocatalysis

引用

Nano Research 2025年第1期18卷 362-372页

作者： YinSheng Xu Zihan Li Zhonghan Cheng Somboon Chaemchuen State Key Laboratory of Advanced Technology for materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China department of chemical engineering Faculty of EngineeringMahidol UniversityNakhon Pathom 73170Thailand State Key Laboratory of Silicate materials for Architectures Wuhan University of TechnologyWuhan 430070China School of materials Science and engineering Wuhan University of TechnologyWuhan 430070China

Developing non-noble catalyst synthesis under green conditions with efficient electrochemical reactions is a challenging task in green energy *** meet this challenge,the synthesis of hybridized non-noble cobalt and iron in the zeolitic-imidazole framework(Co/Fe-ZIF)through a solid-state thermal(SST)method is *** the obtained Co/Fe-ZIF structure,iron atoms are uniformly dispersed and randomly hybridized with primary cobalt atoms and imidazole linker,similar to the structure of *** hybridized Co/Fe-ZIF shows potential as an electrocatalyst for oxidation evolution reaction(OER).The optimal iron-incorporating catalyst,Co/Fe_(0.2)-ZIF,demonstrates remarkable performance with a minimized overpotential of 285 mV at the current density(j)of 10 mA·cm^(-2)in 1 M *** synergistic effect of iron and cobalt ions on the catalyst provides active sites that bind to intermediate(OOH^(*))more strongly and facilitate high electron charge transfer,enhancing efficient ***,the synergistic Co/Fe_(0.2-)ZIF catalyst demonstrates excellent durable reaction time compared to non-iron catalyst(ZIF-67)and conventional catalyst(RuO_(2)).

关键词： zeolitic-imidazole frameworks solid-state thermal method solvent-free synthesis electrocatalyst oxidation evolution reaction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Formation of Nano/Ultrafine Grains in AISI 321 Stainless Steel Using Advanced Thermo-Mechanical Process

引用

Acta Metallurgica Sinica(English Letters) 2015年第4期28卷 499-504页

作者： Mohsen Golzar Shahri S.Rahman Hosseini Mehdi Salehi department of materials engineering Isfahan University of Technology department of materials engineering Maleke-Ashtar University of Technology

Production of nano/ultrafine grains through deformation-induced martensite formation and its reversion to austenite in an AISI 321 stainless steel was studied. The repetitive cold rolling and subsequent annealing were conducted to obtain nanocrystalline structure. Heavy cold rolling （90% reduction） at ＋20 and -20 ℃ was carded out to induce the formation of α′-martensite from metastable austenitic material. The process was followed by annealing treatment at 700-900 ℃ for 0.5-30 min. Effects of process parameters, i.e., ＂reduction percentage,＂＂rolling temperature,＂＂annealing temperature＂ and ＂annealing time＂, on the microstructural development were considered. Microstructural evolutions were conducted using feritscope, X-ray diffractometer and scanning electron microscope. Hardness of the specimens was measured by Vickers method. Results revealed that the higher thickness reduction and lower rolling temperature provided more martensite volume fraction and further hardness. X-ray diffraction patterns and feritoscopic results indicated that saturated strain （εs） was reduced from 2.3 to 0.9 when temperature declined from ＋20 to -20 ℃. The smallest grain size （about 70 nm） was achieved in the condition of cold rolling at -20℃followed by annealing at 750 ℃for 5 min.

关键词： Austenitic stainless steel Deformation-induced martensite Nano/ultrafine grain structure Thermo-mechanical treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：