检索结果-南通市图书馆

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won department of chemical and Biological engineering Korea University department of chemical engineering (Integrated process) Kyung Hee University department of chemical engineering and Materials Science Ewha Womans University department of chemical engineering Pukyong National University Resources engineering Plant Research department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Carbon capture and utilization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Magnetron sputtered nickel oxide with suppressed interfacial defect states for efficient inverted perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 348-355页

作者： Guoqiang Ma Qin Tan Zhaoning Li Jingwei Xiu Jiafeng Wang Tianle Cheng Dong He Qiang Sun Xuhang Ma Francesco Lamberti Zhubing He department of Materials Science and engineering Institute of Innovative Materials (I2M) Shenzhen Key Laboratory of Full Spectral Solar Electricity Generation (FSSEG)Southern University of Science and Technology (SUSTech) Core Research Facilities Southern University of Science and Technology department of chemical Sciences Department of Industrial Engineering University of Padova

Widely used spin-coated nickle oxide （NiOx） based perovskite solar cells often suffer from severe interfacial reactions between the NiOxand adjacent perovskite layers due to surface defect states,which inherently impair device performance in a long-term view,even with surface molecule *** this study,we developed high-quality magnetron-sputtered NiOxthin films through detailed process optimization,and compared systematically sputtered and spin-coated NiOxthin film surfaces from materials to *** sputtered NiOxfilms exhibit improved crystallinity,smoother surfaces,and significantly reduced Ni3+or Ni vacancies compared to their spin-coated ***,the interface between the perovskite and sputtered NiOxfilm shows a substantially reduced density of defect *** solar cells （PSCs） fabricated with our optimally sputtered NiOxfilms achieved a high power conversion efficiency （PCE） of up to 19.93%and demonstrated enhanced stability,maintaining 86.2% efficiency during 500 h of maximum power point tracking under one standard sun ***,with the surface modification using (4-(2,7-dibromo-9,9-dimethylacridin-10（9H）-yl)butyl)p hosphonic acid （DMAcPA）,the device PCE was further promoted to 23.07%,which is the highest value reported for sputtered NiOxbased PSCs so far.

关键词： Perovskite

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High‑Entropy Electrode Materials:Synthesis,Properties and Outlook

引用

Nano-Micro Letters 2025年第1期17卷 472-506页

作者： Dongxiao Li Chang Liu Shusheng Tao Jieming Cai Biao Zhong Jie Li Wentao Deng Hongshuai Hou Guoqiang Zou Xiaobo Ji College of Chemistry and chemical engineering Central South UniversityChangsha 410083People’s Republic of China School of Chemistry and chemical engineering Hunan Institute of EngineeringXiangtan 411104People’s Republic of China

High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two *** definition of high-entropy materials has continuously *** the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode ***,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation ***,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy *** should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy *** this review,the definition and development of high-entropy materials are briefly ***,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis ***,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.

关键词： High-entropy Energy storage Electrode materials

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bioinspired Ultrasensitive Flexible Strain Sensors for Real‑Time Wireless Detection of Liquid Leakage

引用

Nano-Micro Letters 2025年第3期17卷 310-327页

作者： Weilong Zhou Yu Du Yingying Chen Congyuan Zhang Xiaowei Ning Heng Xie Ting Wu Jinlian Hu Jinping Qu Key Laboratory of Material Chemistry for Energy Conversion and Storage Ministry of EducationHubei Key Laboratory of Material Chemistry and Service Failure and Hubei Engineering Research Center for Biomaterials and Medical Protective MaterialsSchool of Chemistry and Chemical EngineeringHuazhong University of Science and TechnologyWuhan 430074People’s Republic of China School of Materials Science and engineering Wuhan Institute of TechnologyWuhan 430205People’s Republic of China department of Biomedical engineering City University of Hong KongHong KongSAR 999077People’s Republic of China

Liquid leakage of pipeline networks not only results in considerableresource wastage but also leads to environmental pollution and ecological *** response to this global issue, a bioinspired superhydrophobic thermoplastic polyurethane/carbon nanotubes/graphene nanosheets flexible strain sensor (TCGS) hasbeen developed using a combination of micro-extrusion compression molding andsurface modification for real-time wireless detection of liquid leakage. The TCGSutilizes the synergistic effects of Archimedean spiral crack arrays and micropores,which are inspired by the remarkable sensory capabilities of scorpions. This designachieves a sensitivity of 218.13 at a strain of 2%, which is an increase of 4300%. Additionally, it demonstrates exceptional durability bywithstanding over 5000 usage cycles. The robust superhydrophobicity of the TCGS significantly enhances sensitivity and stability indetecting small-scale liquid leakage, enabling precise monitoring of liquid leakage across a wide range of sizes, velocities, and compositionswhile issuing prompt alerts. This provides critical early warnings for both industrial pipelines and potential liquid leakage scenariosin everyday life. The development and utilization of bioinspired ultrasensitive flexible strain sensors offer an innovative and effectivesolution for the early wireless detection of liquid leakage.

关键词： Thermoplastic polyurethane Bioinspired Cracks Liquid leakage Flexible strain sensor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nanoimprint lithography-assisted block copolymer self-assembly for hyperfine fabrication of magnetic patterns based on L10-FePt nanoparticles

引用

Science China Chemistry 2025年

作者： Jie Zhang Yi Chen Guijun Li Zelin Sun Zhengong Meng Wai-Yeung Wong department of Applied Biology and chemical technology and Research institute for Smart Energy The Hong Kong Polytechnic University The Hong Kong Polytechnic University Shenzhen Research institute Division of Integrative Systems and Design and Department of Electronic and Computer Engineering The Hong Kong University of Science and Technology School of Flexible Electronics (Future technology) and institute of Advanced Materials (IAM) Nanjing Tech University

L10-FePt-type bit-patterned media has provided a promising alternative for ultrahigh-density magnetic recording systems in the current digital era, but rapid fabrication of magnetic patterns with hyperfine bit islands is still challenging, especially with the target for miniaturization and scalable production simultaneously. Herein, Fe,Pt-containing block copolymers were utilized as single-source precursors for solution-processable patterning and subsequent generation of the demanding magnetic FePt dots by in situ pyrolysis. High-throughput nanoimprint lithography was initially employed to fabricate the predefined bit cells precisely,and then the intrinsic self-assembly of phase-separated block copolymers further drove the formation of accurate bit *** from the synergistic effect of top-down lithographic approach and bottom-up self-assembly, the customizable patterns could be achieved for large-scale mass production in targeted areas, but high-density isolated dots could also be accurately aligned along the patterned features after subsequent self-assembly. This reliable strategy would provide a good avenue to precisely construct ultrahigh-density magnetic data storage devices.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Negative PO3-implanted bionic ion transport channels for promoting Li-S battery

引用

Science China Chemistry 2025年

作者： Wenhuan Huang Shun Wang Xuehan Hou Yanan Zhang Xingxing Zhang Yaoxiao Zhao Xilang Jin Huabin Zhang Fei Wang Jian Zhang Key Laboratory of chemical Additives for China National Light Industry College of Chemistry and Chemical EngineeringShaanxi University of Science and Technology School of Materials and chemical engineering Xi'an Technological University Chemistry Program Physical Science and Engineering Division King Abdullah University of Science and Technology State Key Laboratory of Structural Chemistry Fujian Institute of Research on the Structure of Matter Chinese Academy of Sciences

Lithium-sulfur （Li-S） battery,as a promising next-generation high-energy-density battery,suffers from lithium polysulfides（LPSs） shuttle and Li dendrites *** crystalline framework-based membranes as separator can effectively absorb and restrain LPSs but without precise structural design principal exploration and mechanism ***,bio-inspired 1D oriented lithium-ion transport channels with molecular negatively charged PO3（-1） have been developed in hybrid tetrazole frameworks for promoting the transmission of Li+*** theoretical calculations and in situ spectroscopy demonstrated the higher binding energy and inhibited diffusion of LPSs in *** assembled PP@PO3Janus separator in Li-S coin cell delivered a high initial capacity of 1410.9 mAh g-1at 0.1 C and a low attenuation rate of 0.038%per cycle over 500 cycles at 5 ***,the high capacities of 862,542 and 409 mAh g-1based on high-sulfur-loading cathodes of 2.6,3.8 and 5.0 mg cm-2at0.5 C were achieved,***,the punch battery of PO3@PP separator with S-cathode of 1.2 mg cm-2has been developed for demonstrating its potentials commercial application,which displays impressive capacity of 873.4 mAh g-1with the retention of～78.9%over 50 cycles.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Electrochemical conversion of methane to bridge the gap in the artificial carbon cycle

引用

Journal of Energy Chemistry 2025年第1期100卷 286-308页

作者： Yuhao Peng Yuefeng Song Ihar Razanau Juanxiu Xiao Wei Xiao Di Hu Guoxiong Wang College of Chemistry and Molecular Sciences Hubei Key Laboratory of Electrochemical Power Sources Wuhan University State Key Laboratory of Catalysis Dalian National Laboratory for Clean Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Dalian Institute of Chemical Physics Chinese Academy of Sciences Laboratory of Physical-chemical Technologies SSPA Scientific and Practical Materials Research Centre of NAS of Belarus State Key Laboratory of Marine Resources Utilization in South China Sea Collaborative Innovation Center of Marine Science and Technology School of Marine Science and Engineering Hainan University department of chemical and Environmental engineering University of Nottingham Ningbo China

Methane, an abundant one-carbon（C1） resource, is extensively used in the industrial production of vital fuels and value-added chemicals. However, current industrial methane conversion technologies are energy-and carbon-intensive, mainly due to the high activation energy required to break the inert C–H bond, low selectivity, and problematic side reactions, including CO2emissions and coke deposition. Electrochemical conversion of methane（ECM） using intermittent renewable energy offers an attractive solution, due to its modular reactor design and operational flexibility across a broad spectrum of temperatures and pressures. This review emphasizes conversion pathways of methane in various reaction systems, highlighting the significance and advantages of ECM in facilitating a sustainable artificial carbon cycle. This work provides a comprehensive overview of conventional methane activation mechanisms and delineates the complete pathways of methane conversion in electrolysis contexts. Based on surface/interface chemistry, this work systematically analyzes proposed reaction pathways and corresponding strategies to enhance ECM efficiency towards various target products, including syngas, hydrocarbons, oxygenates, and advanced carbon materials. The discussion also encompasses opportunities and challenges for the ECM process, including insights into ECM pathways, rational electrocatalyst design, establishment of benchmarking protocols, electrolyte engineering, enhancement of CH4conversion rates, and minimization of CO2emission.

关键词： Activation energy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dual‑Donor‑Induced Crystallinity Modulation Enables 19.23% Efficiency Organic Solar Cells

引用

Nano-Micro Letters 2025年第3期17卷 376-388页

作者： Anhai Liang Yuqing Sun Sein Chung Jiyeong Shin Kangbo Sun Chaofeng Zhu Jingjing Zhao Zhenmin Zhao Yufei Zhong Guangye Zhang Kilwon Cho Zhipeng Kan Center On Nanoenergy Research Institute of Science and Technology for Carbon Peak&NeutralitySchool of Physical Science&TechnologyGuangxi UniversityNanning 530004People’s Republic of China department of chemical engineering Pohang University of Science and TechnologyPohang 37673South Korea College of New Materials and New Energies Shenzhen Technology UniversityShenzhen 518118People’s Republic of China Zhejiang engineering Research Center for Fabrication and Application of Advanced Photovoltaic Materials School of Materials Science and EngineeringNingboTech UniversityNingbo 315100People’s Republic of China State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures Nanning 530004People’s Republic of China

Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains ***, wide bandgap polymer donor PTzBI-dF is demonstrated as an effectivemodulator for enhancing the crystallinity of the bulk heterojunction active layerscomposed of D18 derivatives blended with Y6, leading to dense and orderedmolecular packings, and thus, improves photoluminescence quenching *** a result, the photovoltaic devices exhibit reduced trap-assisted charge recombinationlosses, achieving an optimized power conversion efficiency of over 19%.Besides the efficiency enhancement, the devices comprised of PTzBI-dF as athird component simultaneously attain decreased current leakage, improved chargecarrier mobilities, and suppressed bimolecular charge recombination, leading toreduced energy losses. The advanced crystalline structures induced by PTzBI-dFand its characteristics, such as well-aligned energy level, and complementaryabsorption spectra, are ascribed to the promising performance *** findings suggest that donor phase engineering is a feasible approach to tuning the molecular packings in the active layer, providingguidelines for designing effective morphology modulators for high-performance organic solar cells.

关键词： Trap-assisted charge recombination Photoluminescence Miscibility Current leakage Power conversion efficiency

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Boosting hydrocarbon conversion via Cu-doping induced oxygen vacancies on CeO2 in CO2 electroreduction

引用

Journal of Energy Chemistry 2025年第1期100卷 66-76页

作者： Lei Xue Tong Shi Chenhui Han Heng Zhang Fenrong Liu Haorun Li Yan Wang Xiaojun Gu Shanghong Zeng Inner Mongolia Key Laboratory of Chemistry and Physics of Rare Earth Materials School of Chemistry and Chemical Engineering Inner Mongolia University State Key Laboratory of Coal Conversion Institute of Coal Chemistry Chinese Academy of Sciences institute of Catalysis Department of Chemistry Zhejiang University National Key Laboratory of Baiyunobo Rare Earth Resource Research and Comprehensive Utilization Baotou Research Institute of Rare Earths

Conversion of CO2back to hydrocarbons is the most direct way of closing the“carbon cycle”,and its significance is further enlarged if this process is driven by renewable energies such as ***,precisely controlling the product selectivity towards hydrocarbons against the competitive hydrogen evolution remains challenging,especially for Cu-based ***,we report a novel defect engineering strategy,by which Cu-doping-induced oxygen vacancies on CeO2nanorods were effectively created,with adjustable vacancy/Cu *** resulting optimum catalyst shows up to 79% catalytic current density to hydrocarbons （excluding CO）,with 49% faradaic efficiency to *** and density functional theory unveil that the ratio between oxygen vacancy and Cu affects significantly the formation of*CHO and activation of H2O,which leads to the following deep hydrogenation to *** findings may spur new insights for designing and developing more controllable chemical process relevant to CO2utilization.

关键词： Nanorods

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Harnessing the Streptomyces-originating type I-E CRISPR/Cas system for efficient genome editing in Streptomyces

引用

Science China Life Sciences 2025年

作者： Yuhui Xie Xiaoyan Liu Tingting Wu Yunzi Luo Frontiers Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education) School of Chemical Engineering and TechnologyTianjin University department of Gastroenterology State Key Laboratory of BiotherapyWest China HospitalSichuan University Georgia Tech Shenzhen institute Tianjin University Haihe Laboratory of Sustainable chemical Transformations

Since their discovery,CRISPR/Cas systems have significantly expanded the genetic toolbox,aiding in the exploration and enhanced production of natural products across various *** these,class 2 CRISPR/Cas systems are simpler and more broadly used,but they frequently fail to function effectively in many Streptomyces *** this study,we present an engineered class 1 type I CRISPR/Cas system derived from Streptomyces avermitilis,which enables efficient gene editing in phylogenetically distant Streptomyces *** a plasmid interference assay,we identified the effective protospacer adjacent motif as 5′-AAN-3′.Utilizing this system,we achieved targeted chromosomal deletions ranging from 8 bp to 100 kb,with efficiencies exceeding 92%.We further utilized this system to insert DNA fragments into different Streptomyces genomes,facilitating the heterologous expression of exogenous genes and the activation of endogenous natural product biosynthetic gene ***,we established a type I CRISPR/Cas-based gene-editing methodology that significantly advances the exploration of Streptomyces,known for their rich natural product *** is the first report of a gene editing tool developed based on the endogenous class 1 type I CRISPR/Cas system in Streptomyces *** work enriches the Streptomyces gene manipulation toolbox and advances the discovery of valuable natural products within these organisms.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：