检索结果-南通市图书馆

Journal of Advanced Ceramics 2024年第1期13卷 63-72页

作者： Min Fu Wenjing Hu Hua Tong Xin Ling Linggui Tan Fanglin Chen Zetian Tao School of Resources Environment and Safety EngineeringUniversity of South ChinaHengyang 421001China department of Mechanical engineering University of South CarolinaColumbia 29208USA

One potential solution to the problems of energy storage and conversion is the use of reversible protonic ceramic electrochemical cells(R-PCEC),which are based on the solid oxide fuel cell(SOFC)technology and offer a flexible route to the generation of renewable ***,the R-PCEC development faces a range of significant challenges,including slow oxygen reaction kinetics,inadequate durability,and poor round-trip efficiency resulting from the inadequacy of an air *** address these issues,we report novel B-sites doped Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.3)O_(3−δ)(PBCF)with varying amounts of Sn as the air electrode for R-PCEC to further enhance electrochemical performance at lower *** 600℃,R-PCEC with an air electrode consisting of Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.25)Sn_(0.05)O_(3+δ)has achieved peak power density of 1.12 W∙cm^(−2) in the fuel cell mode and current density of 1.79 A∙cm^(−2) in the electrolysis mode at a voltage of 1.3 ***,R-PCECs have shown good stability in the electrolysis mode of 100 *** study presents a practical method for developing durable high-performance air electrodes for R-PCECs.

关键词： triple conducting oxide dual-element doping protonic ceramic electrochemical cells(PCECs) catalytic

Effect of yttrium and manganese addition on catalytic soot combustion activity and anti-high-temperature stability of CeO_(2) catalyst

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第2期42卷 334-344,I0004页

作者： Yi Zhu Xingyu Liu Wei Shi Jia Li Changbing Ye Ruimei Fang Huifeng Zhu Shanhu Chen Li Lan College of Chemistry biology and environment Yuxi Normal UniversityYuxi 653100China Institute of biology and environmental engineering Yuxi Normal UniversityYuxi 653100China College of environment and Resources Chongqing Technology and Business UniversityChongqing 400067China College of Chemistry and Chemical engineering Jiangxi Science and Technology Normal UniversityNanchang 330013China College of Materials and Mechatronics Jiangxi Science and Technology Normal UniversityNanchang 330013China

In order to analyze the influence of the addition of yttrium and manganese on the soot combustion performance and high temperature stability of CeO_(2) catalyst,a series of Y/Mn-modified CeO_(2) catalysts were *** effects of structural properties,textural properties,oxygen vacancies,Ce^(3+),surface adsorbed oxygen species,reduction properties and desorption properties of oxygen species on the activity were analyzed by various characterization *** results of the activity test show that the addition of manganese is beneficial to enhancement of the activity,while the addition of yttrium increases the amount of reactive oxygen species,but decreases the *** aging at 700℃,the activity of the CeMn catalyst decreases most sharply,while the catalytic activity of the CeY catalyst can be maintained to a certain ***,the addition of yttrium and manganese at the same time can stabilize the *** fundamental reason is that yttrium and manganese move to the surface of the solid solution after aging,which increases the reduction performance of the catalyst,thus contributing to the increase of *** the activity of CeYMn catalyst decreases after aging at 800℃,it is still higher than that of other catalysts aged at 700℃.

关键词： CeO_(2)catalyst Soot catalytic combustion Diesel pollution control Rare earths High temperature stability Low temperature reduction performance

维普期刊数据库

Eigenfrequency analysis of bridges using a smartphone and a novel low-cost accelerometer prototype

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil engineering 2024年第2期18卷 202-215页

作者： Seyedmilad KOMARIZADEHASL Ye XIA Mahyad KOMARY Fidel LOZANO department of Civil and environment engineering Universitat Politècnica de CatalunyaBarcelona 08034Spain department of Bridge engineering Tongji UniversityShanghai 200092China department of Civil engineering Universidad de Castilla-La ManchaCiudad Real 13071Spain

Researchers are paying increasing attention to the development of low-cost and microcontroller-based accelerometers,in order to make structural health monitoring feasible for conventional bridges with limited monitoring *** with the low-cost sensor development,the use of the embedded accelerometers of smartphones for eigenfrequency analysis of bridges is becoming popular in the civil engineering *** paper,for the first time in the literature,studies these two promising technologies by comparing the noise density and eigenfrequency analysis of a self-developed,validated and calibrated low-cost Internet of things based accelerometer LARA(low cost adaptable reliable accelerometer)with those of a state of the art smartphone(iPhone XR).The eigenfrequency analysis of a footbridge in San Sebastian,Spain,showed that the embedded accelerometer of the iPhone XR can measure the natural frequencies of the under study bridge.

关键词： smartphone modal analysis eigenfrequency analysis low-cost accelerometers Arduino Raspberry Internet of things

Breakthrough of Carbon-Ash Recalcitrance in Hydrochar via Molten Carbonate:engineering Mineral-Rich Biowaste Toward Sustainable Platform Carbon Materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

engineering 2024年第5期36卷 167-177页

作者： Zihan Wang Leli Zhang Yuanhui Zhang Zhidan Liu Laboratory of environment-Enhancing Energy(E2E) Key Laboratory of Agricultural Engineering in Structure and EnvironmentMinistry of AgricultureCollege of Water Resources and Civil EngineeringChina Agricultural UniversityBeijing 100083China department of Agricultural and Biological engineering University of Illinois at Urbana-ChampaignUrbanaIL 61801USA

The function-led design of porous hydrochar from mineral-rich biowaste for environmental applications inevitably suffers from carbon-ash ***,a method to alter the original carbon skeleton with ash remains elusive and hinders the availability of ***,we propose a facile strategy for breaking the rigid structure of carbon-ash coupled hydrochar using phase-tunable molten carbonates.A case system was designed in which livestock manure and NaHCO3 were used to prepare the activated hydrochar,and NH3 served as the target *** to the redox effect,we found that organic fractions significantly advanced the melting temperature of Na2CO3 below 800℃.The Na species steadily broke the carbon-ash interaction as the thermal intensity increased and transformed inorganic constituents to facilitate ash dissolution,rebuilding the hydrochar skeleton with abundant hierarchical channels and active defect *** surface polarity and mesopore distribution collectively governed the five cycles NH3 adsorption attenuation *** hydrochar delivered favorable potential for application with a maximum overall adsorption capacity of 100.49 mg·g^(-1).Integrated spectroscopic characterization and theoretical computations revealed that incorporating NH3 on the carbon surface could transfer electrons to chemisorbed oxygen,which promoted the oxidation of pyridine-N during *** work offers deep insight into the structure function correlation of hydrochar and inspires a more rational design of engineered hydrochar from high-ash biowaste.

关键词： Hydrochar Livestock manure Ammonia adsorption Deashing Oxygen activation

Prominent removal of trace lead(Ⅱ)ions from polluted water by terephthalic acid reformed Al/Zn metal organic nanoflakes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第1期84卷 81-88页

作者： Junhua Li Lingshu Gao Junmao Hong Xiaofeng Shi Sifang Kong Jingyu Wang Hassan Algadi Benbin Xu Zhanhu Guo School of Chemistry and Chemical engineering North University of ChinaTaiyuan030051China School of Traffic&environment Shenzhen Institute of Information TechnologyShenzhen518172China department of Electrical engineering Faculty of EngineeringNajran UniversityNajran11001Saudi Arabia Mechanical and Construction engineering Faculty of Engineering and EnvironmentNorthumbria UniversityNewcastle Upon TyneNE18STUK

Terephthalic acid reformed Al/Zn metal organic nanoflake was prepared and functionalized with trie-thylamine(T-AlZn).Without adding terephthalic acid,there was no product of metal organic nanoflake.T-AlZn has a remarkable performance in removing trace lead(Ⅱ)ions(Pb^(2+)).The adsorption equipoise with the removal rate≥97%was reached within 35 *** removal rates of T-AlZn for Pb^(2+)declined by only 16.73%after four *** adsorption of T-AlZn for Pb^(2+)follows the Langmuir isotherms model and pseudo-second-order dynamics *** utmost adsorption competence was calculated as 215.27 mg g^(-1).The T-AlZn adsorbent exhibits a bright prospect in the adsorption for Pb^(2+)and is a considerable candidate in the disposal of industrial sewage.

关键词： Metal organic complex Nanoflake Trace level Pb^(2+) Adsorption

Renewable biosynthesis of isoprene from wastewater through a synthetic biology approach:the role of individual organic compounds

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of environmental Science & engineering 2024年第3期18卷 13-24页

作者： Min Yang Xianghui Li Weixiang Chao Xiang Gao Huan Wang Lu Lu State Key Laboratory of Urban Water Resource and environment School of Civil and Environmental EngineeringHarbin Institute of TechnologyShenzhen 518055China Center for Materials Synthetic biology CAS Key Laboratory of Quantitative Engineering Biology of CASShenzhen Institute of Synthetic BiologyShenzhen Institutes of Advanced TechnologyChinese Academic of ScienceShenzhen 518000China Institute of Urban Ecology and environmental Technology School of Materials and Environmental EngineeringShenzhen Polytechnic UniversityShenzhen 518055China

The biosynthesis of isoprene offers a more sustainable alternative to fossil fuel-based approaches,yet its success has been largely limited to pure organic compounds and the cost remains a *** study proposes a waste-to-wealth strategy for isoprene biosynthesis utilizing genetically engineered *** bacteria to convert organic waste from real food *** impact of organic compounds present in wastewater on *** growth and isoprene production was systematically *** results demonstrated that with filtration pretreatment of wastewater,isoprene yield,and production achieved 115 mg/g COD and 7.1 mg/(L·h),***,even without pretreatment,isoprene yield only decreased by~24%,indicating promising ***,maltose,glycerol,and lactate are effective substrates for isoprene biosynthesis,whereas starch,protein,and acetate do not support *** *** optimum C/N ratio for isoprene production was found to be 8:***,augmenting essential nutrients in wastewater elevated the isoprene yield increased to 159 mg/g *** wastewater biosynthesis significantly reduced the cost(44%–53%decrease,p-value<0.01)and CO_(2)emission(46%–55%decrease,p-value<0.01)compared with both sugar fermentation and fossil fuel–based *** study introduced a more sustainable and economically viable approach to isoprene synthesis,offering an avenue for resource recovery from wastewater.

关键词： Wastewater Resource recovery Genetic engineering Biosynthesis Isoprene

High-resolution multi-scale air pollution system:Evaluation of modelling performance and emission control strategies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of environmental Sciences 2024年第3期137卷 65-81页

作者： Diogo Lopes Joana Ferreira Sandra Rafael Ka In Hoi Xin Li Yuan Liu Ka-Veng Yuen Kai Meng Mok Ana Isabel Miranda department of environment and Planning&CESAM University of AveiroAveiroPortugal department of Civil&environmental engineering Faculty of Science and TechnologyUniversity of MacaoMacao SARChina

A high percentage of the world's population lives in areas where air pollutant concentrations exceed the World Health Organization *** work aims to develop and test,a high-resolution multi-scale air pollution modelling system by integrating a set of adequate *** system is able to provide detailed air pollutant concentrations in urban areas and support air quality management strategies through a better identification of different atmospheric *** also allows furthering the design and assessment of air pollution control measures for a specific *** evaluate its performance and suitability,the system was applied to the Macao Special Administrative Region(SAR),China,one of the most densely populated areas on earth,during a winter period when this area is affected by high levels of Particulate Matter(PM).Although the developed system tends to underestimate the PM concentrations,it revealed a good performance in reproducing the temporal and spatial air pollution *** exceedances of the Chinese air quality standards were calculated and high population exposure to PM pollution was *** tested urban atmospheric emission reduction scenarios have shown air quality improvements,indicating that emission reduction measures at urban level should focus on the domestic ***,it is crucial to implement joint pollution prevention strategies with neighbouring regions to improve the air quality in Macao *** approach developed in this work can support policymakers in defining new strategies to reduce atmospheric pollution in urban areas.

关键词： Urban areas High-resolution emission inventory Particulate matter Population exposure

维普期刊数据库

Intelligent solubility estimation of gaseous hydrocarbons in ionic liquids

在线全文

学校读者我要写书评

暂无评论

Petroleum 2024年第1期10卷 109-123页

作者： Behnaz Basirat Fariborz Shaahmadi Seyed Sorosh Mirfasihi Abolfazl Jomekian Bahamin Bazooyar Ahvaz Faculty of Petroleum engineering Petroleum University of Technology (PUT) School of engineering & Physical Sciences Heriot Watt University department of Fluids & environment The University of Manchester department of engineering Chemical Engineering Group Esfarayen University of Technology Mechanical and Aerospace engineering Brunel University London

The research focuses on evaluating how well new solvents attract light hydrocarbons, such as propane,methane, and ethane, in natural gas sweetening units. It is important to accurately determine the solubility of hydrocarbons in these solvents to effectively manage the sweetening process. To address this challenge, the study proposes using advanced empirical models based on artificial intelligence techniques like Multi-Layer Artificial Neural Network(ML-ANN), Support Vector Machines(SVM), and Least Square Support Vector Machine(LSSVM). The parameters for the SVM and LSSVM models are estimated using optimization methods like Genetic Algorithm(GA), Particle Swarm Optimization(PSO), and Shuffled Complex Evolution(SCE). Data on the solubility of propane, methane, and ethane in various ionic liquids are collected from reliable literature sources to create a comprehensive database. The proposed artificial intelligence models show great accuracy in predicting hydrocarbon solubility in ionic liquids. Among these, the hybrid SVM models perform exceptionally well, with the PSO-SVM hybrid model being particularly efficient computationally. To ensure a comprehensive analysis, different examples of hydrocarbons and their order are included. Additionally, a comparative analysis is conducted to compare the AI models with the thermodynamic COSMO-RS model for solubility analysis. The results demonstrate the superiority of the AI models, as they outperform traditional thermodynamic models across a wide range of data. In conclusion, this study introduces advanced artificial intelligence algorithms such as ML-ANN, SVM, and LSSVM in accurately estimating the solubility of hydrocarbons in ionic liquids. The incorporation of optimization techniques and variations in hydrocarbon examples improves the accuracy, precision, and reliability of these intelligent models. These findings highlight the significant potential of AI-based approaches in solubility analysis and emphasize their superiori

关键词： Solubility Gaseous hydrocarbon Intelligent models Ionic liquids

Evaluating different levels of information on the calibration of building energy simulation models

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第4期17卷 657-676页

作者： Siyu Cheng Zeynep Duygu Tekler Hongyuan Ji Wenxin Li Adrian Chong department of the Built environment College of Design and EngineeringNational University of Singapore4 Architecture DriveSingapore117566Singapore School of Civil engineering and Architecture Chongqing University of Science and TechnologyChongqing401331China School of Energy and environment Southeast UniversityNanjing210096China

A poorly calibrated model undermines confidence in the effectiveness of building energy simulation, impeding the widespread application of advanced energy conservation measures (ECMs). Striking a balance between information-gathering efforts and achieving sufficient model credibility is crucial but often obscured by ambiguities. To address this gap, we model and calibrate a test bed with different levels of information (LOI). Beginning with an initial model based on building geometry (LOI 1), we progressively introduce additional information, including nameplate information (LOI 2), envelope conductivity (LOI 3), zone infiltration rate (LOI 4), AHU fan power (LOI 5), and HVAC data (LOI 6). The models are evaluated for accuracy, consistency, and the robustness of their predictions. Our results indicate that adding more information for calibration leads to improved data fit. However, this improvement is not uniform across all observed outputs due to identifiability issues. Furthermore, for energy-saving analysis, adding more information can significantly affect the projected energy savings by up to two times. Nevertheless, for ECM ranking, models that did not meet ASHRAE 14 accuracy thresholds can yield correct retrofit decisions. These findings underscore equifinality in modeling complex building systems. Clearly, predictive accuracy is not synonymous with model credibility. Therefore, to balance efforts in information-gathering and model reliability, it is crucial to (1) determine the minimum level of information required for calibration compatible with its intended purpose and (2) calibrate models with information closely linked to all outputs of interest, particularly when simultaneous accuracy for multiple outputs is necessary.

关键词： calibration building energy simulation(BES) energy conservation measure(ECM) level of information field measurements

Exergy Analysis of Charge and Discharge Processes of Thermal Energy Storage System with Various Phase Change Materials:A Comprehensive Comparison

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 509-521页

作者： Mojtaba TAHERI Fathollah POURFAYAZ Roghayeh HABIBI Akbar MALEKI department of Renewable Energies and environment Faculty of New Sciences and TechnologiesUniversity of TehranTehran***Iran Faculty of Mechanical engineering Shahrood University of TechnologyShahrood***Iran

Thermal energy storage(TES) is of great importance in solving the mismatch between energy production and *** this regard,choosing type of Phase Change Materials(PCMs) which are widely used to control heat in latent thermal energy storage systems,plays a vital role as a means of TES ***,this field suffers from lack of a comprehensive investigation on the impact of various PCMs in terms of *** address this issue,in this study,in addition to indicating the melting temperature and latent heat of various PCMs,the exergy destruction and exergy efficiency of each material are estimated and compared with each ***,in the present work the impact of PCMs mass and ambient temperature on the exergy efficiency is *** results proved that higher latent heat does not necessarily lead to higher exergy ***,to obtain a suitable exergy efficiency,the specific heat capacity and melting temperature of the PCMs must also be *** to the results,LiF-CaF_(2)(80.5%:19.5%,mass ratio) mixture led to better performance with satisfactory exergy efficiency(98.84%) and notably lower required mass compared to other ***,the highest and lowest exergy destruction are belonged to GR25 and LiF-CaF_(2)(80.5:19.5) mixture,respectively.

关键词： exergy analysis phase change materials thermal energy storage exergy efficiency

维普期刊数据库