检索结果-南通市图书馆

Energy band modulation of N-doped rutile/anatase TiO2 photoanode promoting charge separation toward prominent photoelectrochemical performance

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第08期43卷 3784-3797页

作者： Juan Gao Shi-Xuan Wang Jia-Le Deng Ping-Ping Wei Fu-Zhang Chen Ling-Cheng Zheng Yue-Qin Wang Yang Li Yin Liu Gang He School of Mechanics and Photoelectric Physics Anhui University of Science and Technology School of Materials Science and Engineering Anhui University Tianneng battery (Wuhu) Co. Ltd. School of Materials Science and Engineering Anhui University of Science and Technology

To solve the problem of high photogenerated carrier recombination rate and low photoelectric conversion efficiency of TiO2-based materials,a simple N-doped anatase/rutile TiO2heterophase nanorod film was designed by a low-temperature hydrothermal method in this *** enhanced separation and transport of photogenerated charges were facilitated by the smaller contact barrier and appropriate band matching between anatase TiO2nanoparticles and rutile *** introduction of N doping in anatase TiO2resulted in an upward shift of the valence band and a narrowing of the band gap,consequently enhancing the efficiency of visible light *** combination of the heterophase junction and N-doping exhibited a synergistic effect,effectively suppressing the recombination of photogenerated charges and enhancing the photoelectric conversion efficiency of the *** AM 1.5G irradiation,the photocurrent density（J） of the A-TO（N）@R-TONR photoanode reached2.19 mA·cm-2(VRHE,1.23 eV).Additionally,the incident photon-electron conversion efficiency（IPCE） and the charge injection efficiency（η） reached 81.4% and 51.6% at320 ***,the J,IPCE,and η values of the A-TO（N）@R-TONR photoanode were 2.96,2.1 and 3.2times those of pure R-TONR photoanode,*** work presents a rational strategy for designing efficient TiO2-based photoanodes.

关键词： TiO 2 Heterophase junction Photoanode

Simple-structured hydrophilic sensors for sweat uric acid detection with laser-engraved polyimide electrodes and cellulose paper substrates

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第3期35卷 443-448页

作者： Linhe Xu Xueshan Hu Shuang Zhou Ze Zhang Junxian Zhang Chao Li Daxian Zuo Hao Liu Gang Chen Jiayu Wan Jinsong Tao State Key Lab of Pulp and Paper Engineering South China University of TechnologyGuangzhou 510640China Future battery Research Center Global Institute of Future TechnologyShanghai Jiao Tong UniversityShanghai 200240China

Accurate detection of uric acid(UA)is crucial for diagnosing gout,yet traditional sweat-based UA sensors continue to face challenges posed by complex and costly electrode fabrication methods,as well as weakly hydrophilic ***,we designed and developed simple,low-cost,and hydrophilic sweat UA detection sensors constructed by carbon electrodes and cellulose paper *** carbon electrodes were made by carbonized polyimide films through a simple,one-step laser engraving *** electrodes are porous,possess a large specific surface area,and are flexible and *** substrates were composed of highly hydrophilic cellulose paper that can effectively collect,store,and transport *** constructed electrodes demonstrate high sensitivity of 0.4μA Lμmol^(-1)cm^(-2),wide linear range of 2–100μmol/*** addition,our electrodes demonstrate high selectivity,excellent reproducibility,high flexibility,and outstanding stability against mechanical bending,temperature variations,and extended storage ***,our sensors have been proven to provide reliable results when detecting UA levels in real sweat and on real human *** envision that these sensors hold enormous potential for use in the prognosis,diagnosis,and treatment of gout.

关键词： Laser-engraved carbon Polyimide Cellulose paper Hydrophilicity Sweat uric acid

Structural and electrochemical stabilization enabling high-energy P3-type Cr-based layered oxide cathode for K-ion batteries

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第5期6卷 81-93页

作者： Wonseok Ko Seokjin Lee Hyunyoung Park Jungmin Kang Jinho Ahn Yongseok Lee Gwangeon Oh Jung-Keun Yoo Jang-Yeon Hwang Jongsoon Kim department of Energy Science Sungkyunkwan UniversitySuwonRepublic of Korea SKKU Institute of Energy Science and technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea department of Energy Engineering Hanyang UniversitySeoulRepublic of Korea Carbon Composites department Korea Institute of Materials Science(KIMS)ChangwonRepublic of Korea department of battery Engineering Hanyang UniversitySeoulRepublic of Korea

Layered-type transition metal(TM)oxides are considered as one of the most promising cathodes for K-ion batteries because of the large theoretical gravimetric capacity by low molar ***,they suffer from severe structural change by de/intercalation and diffusion of K^(+)ions with large ionic size,which results in not only much lower reversible capacity than the theoretical capacity but also poor power ***,it is important to enhance the structural stability of the layered-type TM oxides for outstanding electrochemical behaviors under the K-ion battery ***,it is investigated that the substitution of the appropriate Ti^(4+)contents enables a highly enlarged reversible capacity of P3-type KxCrO_(2) using combined studies of first-principles calculation and various *** the pristine P3-type KxCrO_(2) just exhibits the reversible capacity of∼120 mAh g^(−1) in the voltage range of 1.5-4.0 V(vs.K^(+)/K),the∼0.61 mol K^(+)corresponding to∼150 mAh g^(−1) can be reversible de/intercalated at the structure of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) under the same ***,even at the high current density of 788 mA g^(−1),the specific capacity of P3-type K0.71[Cr_(0.75)Ti_(0.25)]O_(2) is∼120 mAh g^(−1),which is∼81 times larger than that of the pristine P3-type KxCrO_(2).It is believed that this research can provide an effective strategy to improve the electrochemical performances of the cathode materials suffered by severe structural change that occurred during charge/discharge under not only K-ion battery system but also other rechargeable battery systems.

关键词： cathodes first-principles calculations layered-type oxide materials potassium-ion batteries structural stabilization

Omni-functional simultaneous interfacial treatment for enhancing stability and outgassing suppression of lithium-ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 677-687页

作者： Youbean Lee Chanjoo Park Kyoungmin Min Kwangjin Park department of Mechanical Engineering Gachon UniversityGyeonggi-do 13120Republic of Korea department of battery Engineering Gachon UniversityGyeonggi-do 13120Republic of Korea School of Mechanical Engineering Soongsil UniversitySeoul 06978Republic of Korea

Ni-rich layered oxides in lithium-ion batteries have problems with gas generation and electrochemical performance reduction due to residual lithium's reaction on the surface with the *** address this issue,in this study,the Acid solvent evaporation(AsE)method has been proposed as a potential method to remove residual lithium while promoting the formation of a new LiNO_(3)-derived coating layer on the cathode *** reduction of residual lithium using the ASE method and the construction of a LiNO_(3)-derived coating layer suppresses gas evolution caused by the side effects of the electrolyte,improves electrochemical performance,and improves thermal stability by facilitating the smooth movement of lithium ***,the structural stability and resistance change due to the LiNO_(3)-derived coating layer effects is guaranteed through cycling and DCIR of the pouch *** a result,compared to Pristine,the capacity retention of coin cells increased by 8%after 100 cycles,and pouch cells increased by 25%after 160 *** addition,after cycling the pouch cell,CO_(2) gas has significantly reduced by about 30%compared to Pristine using gas *** ASE method effectively forms a robust LiNO_(3)-derived coating layer on the cathode active material,which helps minimize electrolyte reactivity,suppress ,CO_(2) emissions,enhance surface structure stability,improve thermal stability,and improveoverallbatteryperformance.

关键词： Lithium-ion batteries Ni-rich NCM Acid solvent evaporation LiNO_(3)-derived coating Gasevolution

Mn-based cathode materials for rechargeable batteries

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第1期67卷 87-105页

作者： Xu Zhang Shiqi Liu Boya Wang Guoqing Wang Haozhe Du Xuanyu Wang Haidong Zhang Shu Zhao Lin Wang Haijun Yu Institute of Advanced battery Materials and Devices Faculty of Materials and ManufacturingBeijing University of TechnologyBeijing 100124China Key Laboratory of Advanced Functional Materials Ministry of EducationBeijing University of TechnologyBeijing 100124China Create Energy&Benefit Future Co.Ltd. Beijing 100176China

The rapid expansion of renewable energies asks for great progress of energy-storage technologies for sustainable energy supplies,which raises the compelling demand of high-performance rechargeable *** satisfy the huge demand from the coming energy-storage market,the resource and cost-effectiveness of rechargeable batteries become more and more ***(Mn)as a key transition element with advantages including high abundance,low cost,and low toxicity derives various kinds(spinels,layered oxides,polyanions,Prussian blue analogs,etc.)of high-performance Mn-based electrode materials,especially cathodes,for rechargeable batteries ranging from Li-ion batteries,Na-ion batteries,aqueous batteries,to multivalent metal-ion *** is anticipated that Mn-based materials with Mn as the major transition-metal element will constitute a flourishing family of Mn-based rechargeable batteries(Mn RBs)for large-scale and differentiated energy-storage *** the other hand,several critical issues including Jahn-Teller effect,Mn dissolution,and O release greatly hinder the pace of Mn RBs,which require extensive material optimizations and battery/system *** review aims to provide an investigation about Mn-based materials and batteries for the coming energy-storage demands,with compelling issues and challenges that must be overcome.

关键词： manganese cathode materials Mn-based rechargeable batteries energy storage

A Fluorinated,Ion-Conducting and Adaptive Supramolecular Polymer Protective Layer for Stabilizing Lithium Metal Anodes

在线全文

学校读者我要写书评

暂无评论

CCS Chemistry 2024年第5期6卷 1157-1164页

作者： Tao Chen Bo Qin Yuncong Liu Zhekai Jin Haiping Wu Chao Wang Xi Zhang Institute of Smart City and Intelligent Transportation Southwest Jiaotong UniversityChengdu 610032 Key Lab of Organic Optoelectronics and Molecular Engineering Department of ChemistryTsinghua UniversityBeijing 100084 department of battery technology BYD Shanghai Co.Ltd.Shanghai 201611

Perfluoropolyether(PFPE)is a promising material for protective coatings on Li metal anodes due to its chemical inertness and minimal swelling in ***,a conventional PFPE coating with poor ionic conductivity and mechanical stability is still not satisfactory for long-term cycling of Li ***,we design and synthesize an adaptive and high-conductivity supramolecular polymer(PFPE-EG-I).This polymer is constructed from PFPE chains,ethylene glycol(EG)segments,and hydrogen-bonding moieties derived from isophoronediisocyanate,serving as a multifaceted artificial solid electrolyte interphase(SEI).The incorporated EG segments enhance the Li+conductivity of the SEI,and the hydrogen-bonding units introduce a dynamic self-adaptive behavior to the polymer matrix.A solution-processed PFPE-EG-I coating is demonstrated to promote uniform Li deposition and mitigate side reactions between Li and the ***,this leads to enhanced coulombic efficiency and prolonged cycle longevity in lithium metal batteries(LMBs).The innovative design of this multifunctional artificial SEI offers a promising avenue for the realization of dendrite-free Li anodes,paving the way for the advancement of high-performance LMBs.

关键词： supramolecular polymers batteries lithium anodes artificial solid electrolyte interphase perfluoropolyether

Phytochemical analysis, antioxidant, acetylcholinesterase, and α-amylase inhibitors from Hippeastrum hybridum extract

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Traditional Chinese Medicine 2024年第3期44卷 496-504页

作者： Naila Sher Mushtaq Ahmed Nadia Mushtaq department of Biotechnology University of Science and Technology department of Botany University of Science and Technology

OBJECTIVE:To investigate the effects of Hippeastrum hybridum（HH） as a free radical scavenger,and an inhibitor of the two enzymes i-e Alpha-amylase（α-amylase） and acetylcholinesterase（AChE）.METHODS:In this study,HH plant was preliminary analyzed for phytochemical screening and then tested for its antioxidant,anti-α-amylase,and anti-AChE efficiency via standard ***:Phytochemical analysis shows the existence of different compounds;while Coumarins and quinones were *** total phenolic,flavonoid,and tannins content were found to be（78.52±0.69） mg GAE/g,（2.01±0.04） mg RUE/g,and（58.12±0.23） mg TAE/g of plant extract respectively.28.02%±0.02% alkaloid and 2.02%±0.05% saponins were present in the HH *** HH extract showed the anti-oxidant property with IC50（50%inhibition） of（151.01±0.13）(HH),（79.01±0.04）(Ascorbic acid) for ferric reducing,（91.48±0.13）(HH),（48.02±0.11）(Ascorbic acid) against Ammonium molybdenum,（156.02±0.31）(HH),（52.38±0.21）(Ascorbic acid) against DPPH,136.01±0.21（HH）,52.02±0.31（Ascorbic acid） against H2O2,and 154.12±0.03（HH）,（40.05±0.15）(Ascorbic acid)μg/mL against ABTS *** analysis indicated that HH caused a competitive type of inhibition of α-amylase(Vmaxremained constant and Km increases from 10.65 to84.37%) while Glucophage caused the un-competitive type of inhibition i-e both Km and Vmaxdecreased from40.49 to 69.15%and 38.86 to 69.61%*** Ki,（inhibition constant）;KI,（dissociation constant）,Km,（Michaelis-Menten constant）,and IC50 were found to be62,364,68.1,and 38.08±0.22 for HH and 12,101.05,195,34.01±0.21 for ***,HH causes an anon-competitive type of inhibition of AChE i-e Km remains constant while Vmaxdecreases from 60.5%to74.1%.The calculated Ki,KI,Km,and IC50 were found to be 32,36.2,0.05,and 18.117±***:From the current results,it is concluded that HH extract contains bioactive compounds,and could be a good alternative to controlling oxidants,Alzheimer‘s and T

关键词： Hippeastrum hybridum acetylcholinesterase alpha-amylase antioxidant phytochemicals

Vacancy healing for stable perovskite solar cells via bifunctional potassium tartrate

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 64-70,I0002页

作者： Jing Dou Yue Ma Xiuxiu Niu Wentao Zhou Xueyuan Wei Jie Dou Zhenhua Cui Qizhen Song Tinglu Song Huanping Zhou Cheng Zhu Yang Bai Qi Chen Experimental Centre for Advanced Materials School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China Beijing Key Laboratory for Theory and technology of Advanced battery Materials Key Laboratory of Polymer Chemistry and Physics of Ministry of EducationBIC-ESATSchool of Materials Science and EngineeringPeking UniversityBeijing 100871China

Perovskite solar cell has gained widespread attention as a promising technology for renewable ***, their commercial viability has been hampered by their long-term stability and potential Pb leakage. Herein, we demonstrate a bifunctional passivator of the potassium tartrate(PT) to address both challenges. PT minimizes the Pb leakage in perovskites and also heals cationic vacancy defects, resulting in improved device performance and stability. Benefiting from PT modification, the power conversion efficiency(PCE) is improved to 23.26% and the Pb leakage in unencapsulated films is significantly reduced to 9.79 ppm. Furthermore, the corresponding device exhibits no significant decay in PCE after tracking at the maximum power point(MPP) for 2000 h under illumination(LED source, 100 mW cm^(-2)).

关键词： Perovskite Potassium tartrate Lead leakage Long-term stability

A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of technology(Materials Science) 2024年第1期39卷 160-166页

作者： A Visagan P Ganesh department of Production technology Madras Institute of TechnologyChennai-600044India

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

关键词： single point incremental forming AISI 316L taguchi grey relation analysis principal component analysis surface roughness scanning electron microscopy